Parameter list 7.2 Parameter list
Parameter
Dependency: Note:
Function
Range
Factory default
Can be changed
Scaling
3
End quick commissioning only for motor data
Data set
Data type
Acc. Level
Changeable only when P0010 = 1 (quick commissioning). P3900 = 1: When setting 1 is selected, only the parameter settings carried out via the commissioning menu "Quick commissioning" are retained; all other parameter changes, including the I/O settings, are lost. Motor calculations are also performed. P3900 = 2: When setting 2 is selected, only those parameters, which depend on the parameters in the commissioning menu "Quick commissioning" (P0010 = 1) are calculated. The I/O settings are also reset to default and the motor calculations performed. P3900 = 3: When setting 3 is selected, only the motor and controller calculations are performed. Exiting quick commissioning with this setting saves time (for example, if only motor rating plate data have been changed). Calculates a variety of motor parameters, overwriting previous values. These include P0344 (motor weight), P0350 (stator resistance), P2000 (reference frequency), P2002 (reference current). When transferring P3900, the inverter uses its processor to carry out internal calculations. Communications - both via USS as well as via the Fieldbus - are interrupted for the time that it takes to make these calculations. This can result in the following error messages at the connected SIMATIC S7 control (communications via Fieldbus):
r3930[0...4]
Parameter fault 30
Inverter fault 70
Inverter fault 75
Inverter data version
-
-
-
-
-
U16
3
-
-
U16
4
Displays the A5E number and the inverter data versions. Index:
P3950
[0]
A5E 1st 4 digits
[1]
A5E 2nd 4 digits
[2]
Logistic Version
[3]
Fixed Data Version
[4]
Calib Data Version
Access of hidden parameters
0 - 255
0
U, T
Accesses special parameters for development (expert only) and factory functionality (calibration parameter). r3954[0...12]
CM info and GUI ID
Index:
[0]
-
-
-
-
-
U16
4
-
-
U16
4
Used to classify firmware (only for SIEMENS internal purposes).
r3978
CM label (increment / branch)
[1]
CM label (counter)
[2]
CM label
[3...10]
GUI ID
[11]
GUI ID major release
[12]
GUI ID minor release
BICO counter
-
-
-
Counts the number of changed BICO links.
SINAMICS V20 Inverter
262
Operating Instructions, 11/2012, A5E03728167