MITEE-BITE FIXTURE CLAMPS Uses simple cam action for fast strong clamping during milling/drilling/grinding etc. The unique clamping principle is based on two simple components, a hardened steel socket cap screw & a brass hexagonal washer. The screw head is offset to provide the cam action. As the screw is turned, the washer is moved in the direction of the cam, exerting a strong lateral force that can be applied in any direction. Simply screw into hole until tight, back of approximately 1-1½ turns, insert part and tighten clamp. Consider some of these features: • Take little space and very low profile. • Washer is made of brass so that your cutter never gets damaged. • Washer is six sided so if one side gets damaged, simply turn the hex. • Very quick clamping; half a turn provides between 1 & 2.5mm movement. • Simple & reasonable price.
Basic Fixture Clamp
For multiple part fixture clamping consisting of the brass washer & steel cap screw. code screw size X L hex height max holding force (mm) (mm) (kgs) MTB0206-10 M6 x 1.0 x 12 4.75 360 MTB0208-12 M8 x 1.25 x 16 4.75 360 MTB0210-10 M10 x 1.5 x 20 6.35 890 MTB0212-8 M12 x 1.75 x 25 9.52 1780 MTB0216-4 M16 x 2.0 x 30 12.70 2660
MTB0206-10
Tee Slot Type
By adding a tee nut to the basic clamp, move the clamp into the tee slot of the machine table and tighten the tee nut with the set screw. Then add the basic fixture clamp. tee nut (with set screw) for table slot suits fixture code (mm) clamp screw size MTB9012-2 12 M8 MTB9014-2 14 M10 MTB9016-2 16 M12 MTB9018-2 18 M12 MTB9020-2 20 M16
MTB9012-2
Tee Slot Kits
The ideal way to keep all the parts together without getting lost. CODE CAP SCREWS HEX WASHERS TEE NUTS (WITH SET SCREWS) qTY x DIA qTY x SIZE (A/F) QTY x SLOT SIZE
HEX KEYS A/F
MTB5648
6 x M10
6 x 20.6mm
4 x 14mm
7mm & 5mm
MTB5650
6 x M12
6 x 25.4mm
4 x 16mm
8mm & 5mm
MTB5652
6 x M12
6 x 25.4mm
4 x 18mm
8mm & 6mm
MTB5654
6 x M16
6 x 30.1mm
4 x 20mm
12mm & 6mm
MTB5648
MITEE-BITE TEE SLOT TOE CLAMPS This cam action clamp provides 1780kg positive down force whilst maintaining a low profile. The hardened steel clamping element has a smooth surface for machined work pieces & a serrated surface for rougher work. dimensions (mm) code tee slot size A x B x F1 x F2 MTB5716 16mm 50 x 28.5 x 25.4 x 22.2 MTB5716 A59
06/14
60 Stoddard Rd, Mt Roskill, Auckland 1041, PO Box 57-051, Owairaka, Auckland 1340 Telephone +64 9 620 4169 Facsimile +64 9 620 8253 Email: itl@indtool.co.nz, Website: www.industrialtooling.co.nz