Page 1

!"#$%&'&( ! )*+,#-".)/0#+12 One- and Two-Piece Implants

ScrewPlant®

Bone Level 2-Stage

Tissue Level 1-Stage

ScrewPlant® Internal Hex

ScrewPlus® Internal Hex

ScrewDirect® Straight Snap-on

ScrewIndirect® Screw-Receiving

GoDirect™ OverDenture

ScrewRedirect® Angled Contoured


Table of Contents Page # Implant Design & Surface

1

1037-21 Straight Abutment Includes: Fixation Screw, Transfer and Comfort Cap

Length: 1mm Platform: 3.7mm Diam

xxxxxxxxxxxx Platform 3.7 mm # 1037-21 Straight Abutment xxxxxxxxxxxx Platform 3.7 mm # 1037-21 Straight Abutment

2 Product Labeling: Definitions & Descriptions

3

4-5 ScrewPlus Implants

Zirconia,Titanium, Gold & Plastic, Engaging & Non-Engaging Abutments

26-28

29-31 Surgical Tray

Selection Chart for ScrewPlant & ScrewPlus Systems

22

23-25 Components for Screw-Receiving, Ball & GPS™ Abutments

FMT Packaging & Procedures for Contoured Abutments

18-19

20-21 Cover Screws, Healing Collars, Transfers & Analogs

GoDirect Implants

14-15

16-17 Prosthetic Procedures for ScrewIndirect & GoDirect Implants

ScrewDirect Implants

10-11

12-13

ScrewRedirect Implants

ScrewPlant Implants

6-7

8-9 ScrewIndirect Implants & Components

Application-Specific Guide

32-33

Instruments, Surgical Drills & Surgical Sequence


Implant Design & Surface Mini-threads with Double-lead Threads for Faster Insertion The body of all Spectra-System implants are tapered evenly down from the top to facilitate insertion in an undersized socket (stop at intermediate drill) for expansion in soft bone. This increases initial stability (G. Niznick: Clinical Oral Health 2000 “Achieving Success in Soft Bone”). The SBM textured surface extends over the entire endosseous portion of the Spectra-System implants. Mini-threads start 1mm below the crest of the bone and extend for 2-2.5mm before transitioning into double-lead threads to the apex of the implant. The mini-threads are half the depth and half the distance between adjacent peaks compared to the double-lead threads that extend to the apex of the implant. Mini-threads reduce stress in the critical crestal bone region while double-lead threads reduce the number of turns required to seat the implant. Vertical cutting grooves extend halfway up the implant from the apex for self-tapping insertion. Crest of the Ridge 1.0mm 1.2mm

Quadruple Lead Threads

0.6mm

0.3mm

1.2mm 0.6mm

1.2mm

Double Lead Threads

0.6mm

SBM and HA Coated Surface Options SBM surface is created by using a Soluble Blast Media of Hydroxylapatite (HA) crystals to create a medium-rough texture. We use the same vendor for our SBM and HA coated surface treatments as was used by Paragon Implant Company from 1992-2000 when these studies were conducted. SEMs of Surfaces Mini-threads textured by blasting with SBM™: Blasted with Soluble HA Particles HA Coating: High Crystalline 40u layer SBM Surface 20X

SBM Surface 50X

HA Surface 20X

HA Surface 50X

Animal Studies Bone Response to SBM Surface

1


Application-Specific Selection Guide

Application-Specific Implant System 2-Stage Implant ScrewPlant

2

1-Stage Implant ScrewPlus

1-Piece Implant ScrewDirect

1-Piece Implant ScrewIndirect

1-Piece Implant GoDirect

1-Piece Implant ScrewRedirect


Product Labeling: Definitions & Descriptions

3.7 mm 3.7 mm 3.7 mm 3.7 mm

ScrewPlant Implant Vial and Cap Label 2 3 10 = ScrewPlant SBM 37 = 3.7mmD body diameter 13 = 13mmL body length

4

13

xxxxxxxxxxxx Body ScrewPlantTM # 103713 Platform xxxxxxxxxxxx Body TM ScrewPlant # 103713 Platform

1

103713 ScrewPlant™ Implant SBM™ 3.7mm Diam 13mm 3.7mm Diam

5 6

12

7

11

8

10

9

xxxxxxxxxxxx Platform 3.7 mm # 1037-21 Straight Abutment xxxxxxxxxxxx Platform 3.7 mm # 1037-21 Straight Abutment

ScrewPlant Prosthetic Vial and Cap Label 1 2 3 10 = ScrewPlant prosthetics 37 = 3.7mmD platform diameter -21= prosthetic specific code

4

1037-21 Straight Abutment Includes: Fixation Screw, Transfer and Comfort Cap

Length: 1mm Platform: 3.7mm Diam

13

1037-21 1mmL

7 13

8 14

9

10

11

1) Our products carry the CE mark and fulfill the requirements of the Medical Device Directive 93/42/EEC 2) Manufacturer Symbol 3) Product code or reference number 4) Product description 5) Use before expiration date (XXXX-XX) 6) Gamma sterilization symbol 7) Single-use only symbol 8) Caution: US law restricts the sale of these devices by or on the order of a dentist or physician 9) Tamper proof symbol 10) Refer to Instructions For Use (IFU) 11) Lot number (XXXXXXXXXX) 12) Implant body diameter color reference on surgical tray 13) Implant prosthetic platform diameter (written and color-coded) 14) Non-sterile symbol

3


ScrewPlant ScrewPlant Two-Stage Implant System featuring:

ScrewPlant Packaging

• Internal connection with 2mm long hex & external bevel • Color-coded fixture-mount usable as a transfer & shortened for use as a straight abutment with snap-on comfort cap • 2mm extender retained by cover screw for use as a healing collar or for one-stage surgery • Surface options: SBM (Soluble Blast Media) or HA-coated • Tapered body allows insertion using Zimmer Dental’s Tapered Screw-Vent® drills

3.7mmD Platform

4.7mmD Platform

Carrier/Transfer

5.7mmD Platform

Snap-On Comfort Cap

3.7mmD Implant

4.7mmD Implant

5.7mmD Implant

Extender

Fixture-Mount Transfer: Shortened for final abutment with Snap-On Comfort Cap and Transfer

step 1

4

Cover Screw

step 2

step 3

step 4


ScrewPlant: Two-Piece Implant for Two-Stage Surgery ScrewPlant

SBM and HA Surface Implants

Includes Cover Screw, Fixture Mount, Extender & Comfort Cap

3.7mmD Length 8mmL 10mmL 1.5mmL 13mmL 16mmL

Platform 3.7mmD 3.7mmD 3.7mmD 3.7mmD 3.7mmD

Length 8mmL 10mmL 11.5mmL 13mmL 16mmL

Platform 4.7mmD 4.7mmD 4.7mmD 4.7mmD 4.7mmD

Length 8mmL 10mmL 1.5mmL 13mmL 16mmL

Platform 5.7mmD 5.7mmD 5.7mmD 5.7mmD 5.7mmD

103708 113708

103710 113710

103711 113711

103713 113713

103716 113716

104708 114708

104710 114710

104711 114711

104713 114713

104716 114716

105708 115708

105710 115710

105711 115711

105713 115713

105716 115716

4.7mmD

5.7mmD

5


ScrewPlus ScrewPlus One-Stage Implant System featuring:

ScrewPlus Packaging

• Internal connection with 2mm long hex & external bevel • Color-coded fixture-mount usable as a transfer & shortened for use as a straight abutment with snap-on comfort cap • 2mm extender retained by cover screw for use as a healing collar • Surface options: SBM (Soluble Blast Media) or HA-coated • Tapered body allows insertion using Zimmer Dental’s Tapered Screw-Vent® drills

3.7mmD Platform

4.7mmD Platform

5.7mmD Platform

Carrier/Transfer

6.5mmD Platform

Snap-On Comfort Cap

3.7mmD Implant

3.7mmD Implant

4.7mmD Implant

5.7mmD Implant

Extender

Fixture-Mount Transfer: Shortened for final abutment with Snap-on Comfort Cap and Transfer

step 1

6

Cover Screw

step 2

step 3

step 4


ScrewPlus: Two-Piece Implant for One-Stage Surgery ScrewPlus SBM and HA Surface Implants

Includes Cover Screw, Fixture Mount, Extender & Comfort Cap

3.7mmD Diameter 3.7mmD 3.7mmD 3.7mmD 3.7mmD 3.7mmD

Length 8mmL 10mmL 11.5mmL 13mmL 16mmL

Platform 3.7mmD 3.7mmD 3.7mmD 3.7mmD 3.7mmD

Diameter 3.7mmD 3.7mmD 3.7mmD 3.7mmD 3.7mmD

Length 8mmL 10mmL 11.5mmL 13mmL 16mmL

Platform 4.7mmD 4.7mmD 4.7mmD 4.7mmD 4.7mmD

Diameter 4.7mmD 4.7mmD 4.7mmD 4.7mmD 4.7mmD

Length 8mmL 10mmL 11.5mmL 13mmL 16mmL

Platform 5.7mmD 5.7mmD 5.7mmD 5.7mmD 5.7mmD

Diameter 5.7mmD 5.7mmD 5.7mmD 5.7mmD 5.7mmD

Length 8mmL 10mmL 11.5mmL 13mmL 16mmL

Platform 6.5mmD 6.5mmD 6.5mmD 6.5mmD 6.5mmD

203008 213008

203010 213010

203011 213011

203013 213013

203016 213016

203708 213708

203710 213710

203711 213711

203713 213713

203716 213716

204708 214708

204710 214710

204711 214711

204713 214713

204716 214716

205708 215708

205710 215710

205711 215711

205713 215713

205716 215716

3.7mmD

4.7mmD

5.7mmD

7


ScrewDirect ScrewDirect One-Piece Implant System Featuring:

ScrewDirect Packaging

• Straight abutment head with retentive groove & beveled shoulder 1.5mm above crest of bone • Double-lead threads for 2X faster insertion & quadruple-lead threads near top • Color coded plastic fixture mount usable as a snap-on transfer • Snap-on plastic comfort cap usable as coping for temporary crown • Tapered body allows insertion using Zimmer Dental’s Tapered Screw-Vent® drills

3.7mmD Platform

4.7mmD Platform

5.7mmD Platform

Carrier/Transfer

6.5mmD Platform

Snap-On Comfort Cap

3.0mmD Implant

3.7mmD Implant

4.7mmD Implant

5.7mmD Implant

Snap-On Comfort Cap Seat retentive snap-on comfort cap

Comfort cap maintains tissue opening

Snap-On Transfer Seat retentive snap-on transfer

8

Make transfer impression for abutment analog


ScrewDirect: One-Piece Implant for One-Stage Surgery ScrewDirect SBM Surface Implants

Includes Carrier/Transfer & Comfort Cap

3.0mmD Code 303010 303013 303016

Diameter 3.0mmD 3.0mmD 3.0mmD

Length 10mmL 13mmL 16mmL

Platform 3.7mmD 3.7mmD 3.7mmD 303010

303013

303016

303710

303713

303716

304710

304713

304716

305710

305713

305716

3.7mmD Code 303710 303713 303716

Diameter 3.7mmD 3.7mmD 3.7mmD

Length 10mmL 13mmL 16mmL

Platform 4.7mmD 4.7mmD 4.7mmD

4.7mmD Code 304710 304713 304716

Diameter 4.7mmD 4.7mmD 4.7mmD

Length 10mmL 13mmL 16mmL

Platform 5.7mmD 5.7mmD 5.7mmD

5.7mmD Code 305710 305713 305716

Diameter 5.7mmD 5.7mmD 5.7mmD

Straight Abutment Analog

Length 10mmL 13mmL 16mmL

Platform 6.5mmD 6.5mmD 6.5mmD

Includes Castable Coping

Code 3037 3047 3057 3065

Platform 3.7mmD 4.7mmD 5.7mmD 6.5mmD

3037

3047

3057

3065

9


ScrewIndirect ScrewIndirect One-Piece Implant System Featuring:

ScrewIndirect Packaging Carrier/Transfer

• Screw-Receiving head with retentive groove & beveled shoulder 2.5mm above bone • Double-lead threads for faster insertion, with quadruple-lead mini-threads for reduced stress concentration near crest of bone • Color-coded plastic fixture mount usable as a snap-on transfer • Snap-on plastic comfort cap • Common prosthetic platform across all four diameters of implants • Includes 2mm implant extender • Tapered body allows insertion using Zimmer Dental’s Tapered Screw-Vent® drills

5.0mmD Platform

5.0mmD Platform

5.0mmD Platform

5.0mmD Platform

Snap-On Comfort Cap

Extender

3.0mmD Implant

3.7mmD Implant

4.7mmD Implant

5.7mmD Implant

Extender Transfer

Snap-On Comfort Cap and Transfer Seat retentive snap-on comfort caps

Seat retentive snap-on transfers

Clinical Applications Screw-Retained Bar Overdenture

10

Fixed-Detachable Restoration


ScrewIndirect: One-Piece Implant for One-Stage Surgery ScrewIndirect Includes Carrier/Transfer (orange), Extender, Transfer & Comfort Cap [Requires 2.5mmD Hex Tool]

SBM Surface Implants 3.0mmD Code 403008 403010 403013 403016

Diameter 3.0mmD 3.0mmD 3.0mmD 3.0mmD

Length 8mmL 10mmL 13mmL 16mmL

Platform 5.0mmD 5.0mmD 5.0mmD 5.0mmD

Code 403708 403710 403713 403716

Diameter 3.7mmD 3.7mmD 3.7mmD 3.7mmD

Length 8mmL 10mmL 13mmL 16mmL

Platform 5.0mmD 5.0mmD 5.0mmD 5.0mmD

Code 404708 404710 404713 404716

Diameter 4.7mmD 4.7mmD 4.7mmD 4.7mmD

Length 8mmL 10mmL 13mmL 16mmL

Platform 5.0mmD 5.0mmD 5.0mmD 5.0mmD

Code 405708 405710 405713 405716

Diameter 5.7mmD 5.7mmD 5.7mmD 5.7mmD

Length 8mmL 10mmL 13mmL 16mmL

Platform 5.0mmD 5.0mmD 5.0mmD 5.0mmD

403008

403010

403013

403016

403708

403710

403713

403716

404708

404710

404713

404716

405708

405710

405713

405716

3.7mmD

4.7mmD

5.7mmD

Components for use with 2mmL ScrewIndirect Extender on pg 28 ScrewIndirect Implant Copings

Code 4000-64 4000-65 4000-66 4000-67 4000-69 1000-01 1000-05

Includes Fixation Screw [1000-01]

Platform 5.0mmD 5.0mmD 5.0mmD 5.0mmD 5.0mmD -

Description Gold Coping Titanium Coping Plastic Coping Gold & Plastic Coping Titanium Temporary Coping (includes 1000-05) Replacement Fixation Screw - 2ea Replacement Extender Fixation Screw - 2ea

Gold

Titanium

Plastic

4000-64

4000-65

4000-66

Gold/Plastic Titanium

4000-67

4000-69

ScrewIndirect Comfort Cap, Transfers & Analog

Code 4000-13 4000-02 4000-62 4000-63 4000-06 1000-10 1000-06

Platform 5.0mmD 5.0mmD 5.0mmD 5.0mmD 5.0mmD -

Description Plastic Comfort Cap - 2ea Plastic Implant Transfer - 2ea Open-Tray Transfer plus Fixation Screw Closed-Tray Transfer plus Fixation Screw Aluminum Implant Analog Replacement Open-Tray Fixation Screw - 2ea Replacement Closed-Tray Fixation Screw - 2ea

4000-13

4000-02

4000-62

4000-63

4000-06

11


GoDirect GoDirect One-Piece Implant System Featuring:

GoDirect Packaging

• One-piece implant with GPS™ & Zest LOCATOR® compatible platform • Tapered, self-tapping body for increased stability in soft bone • 3.0mm narrow diameter implant with 1.8mm apical end allowing insertion with 2.3mmD drill • Double-lead threads for faster insertion plus quadruple-lead mini-threads for reduced stress concentration near crest of bone • Internal threads, capped off with cover screw allows for conversion to multi-unit abutment or fixeddetachable bars or bridges • All-in-1 Packaging includes snap-on transfer & comfort cap

Carrier/Transfer

Snap-On Comfort Cap

3.0mmD Implant

3.7mmD Implant

4.7mmD Implant

Snap-On Comfort Cap and Transfer Use plastic carrier to carry implant

Attach comfort cap to implant

Clinical Applications Attach implant carrier as impression transfer

12

Attach housing for chairside pickup

Locator® is a registered trademark of Zest Anchors Company. The GoDirect™ and GPS™ Systems are neither authorized, endorsed nor sponsored by Zest Anchors Company


GoDirect: One-Piece Implant for One-Stage Surgery GoDirect SBM Surface Implants

Includes Carrier/Transfer & Comfort Cap

3.0mmD

In dense bone, use CBD3.2 as final drill

Code 423010 423011 423013 433010 433011 433013 3.7mmD

Diameter 3.0mmD 3.0mmD 3.0mmD 3.0mmD 3.0mmD 3.0mmD

Length 10mmL 11.5mmL 13mmL 10mmL 11.5mmL 13mmL

Shoulder Height 1.5mmL 1.5mmL 1.5mmL 3.0mmL 3.0mmL 3.0mmL

423010

423011

423013

433010

433011

433013

423710

423711

423713

433710

433711

433713

In dense bone, use CBD3.7 as final drill

Code 423710 423711 423713 433710 433711 433713 4.7mmD

Diameter 3.7mmD 3.7mmD 3.7mmD 3.7mmD 3.7mmD 3.7mmD

Length 10mmL 11.5mmL 13mmL 10mmL 11.5mmL 13mmL

Shoulder Height 1.5mmL 1.5mmL 1.5mmL 3.0mmL 3.0mmL 3.0mmL

In dense bone, use CBD4.7 as final drill

Code 424708 424710 424713

Diameter 4.7mmD 4.7mmD 4.7mmD

Length 8mmL 10mmL 13mmL

Shoulder Height 1.5mmL 1.5mmL 1.5mmL 424708

424710

424713

Components for GoDirect Implants on pg 28 Overdenture, Ball & GPS Abutment for GoDirect Implant

Code 4500-61 4500-71 4500-91

Platform 5.0mmD 5.0mmD 5.0mmD

Includes Transfer & Comfort Cap [Requires 1.25mmD Hex Tool]

Collar Heights 1mm 1mm 1mm

4500-61

4500-71

4500-91

Comfort Cap, Transfer, Analog and Alignment Tools

Code 1000-10 4500-06 4500-02 4500-26 1000-97 1000-99

Description Guide Screw for GoDirect Implant - 2ea GoDirect Implant Analog - 1ea GoDirect Implant Transfer - 2ea GoDirect Implant Comfort Cap- 2ea Parallel Post - 4ea Plastic Abutment Angle Measure Guide

1000-99

1000-10

4500-06

4500-02

4500-26

1000-97

GoDirect/GPS Instrumentation

Code GDID GDIT 1000-96

Description GoDirect Implant Drill - (Latch connection for use with Surgical Motor) GoDirect Implant Tool - (Square connection for use with Ratchet or Torque Wrench) Core Tool - Male Removal & Seating Tool

GDID

GDIT

1000-96

13


ScrewRedirect ScrewRedirect One-Piece Implant System featuring:

ScrewRedirect Packaging Carrier

• 12° angled abutment head with contoured margins 1mm above crest of ridge • Single-lead threaded body is 0.3mm shorter than drill length to allow insertion of implant with desired direction of angled head • Double-lead mini-threads near top • Tapered body allows insertion using Zimmer Dental’s Tapered Screw-Vent® drills

4.7mmD Platform

5.7mmD Platform

6.5mmD Platform

ScrewRedirect Implant Placement

3.7mmD Implant

14

4.7mm Implant

5.7mmD Implant

No interference if 1mm clearance

Screw in using 2mm carrier/hex tool

Single lead threads for rotation control

Align angle & contour

Prepare as required

Cement temporary out of occlusion


ScrewRedirect: One-Piece Implant for One-Stage Surgery ScrewRedirect Includes Carrier [Requires 2.0mmD Hex Tool]

SBM Surface Implants 3.7mmD Code 503713 503716

Diameter 3.7mmD 3.7mmD

Length 13mmL 16mmL

Platform 4.7mmD 4.7mmD

503713

503716

504713

504716

505713

505716

4.7mmD Code 504713 504716

Diameter 4.7mmD 4.7mmD

Length 13mmL 16mmL

Platform 5.7mmD 5.7mmD

5.7mmD Code 505713 505716

Guide Pin

Diameter 5.7mmD 5.7mmD

Length 13mmL 16mmL

Platform 6.5mmD 6.5mmD

Use after 2.3mmD Pilot Drill as a guide to ensure clearance & correct implant positioning

Code 5037-07 5047-07 5057-07

Description Guide Pin for 3.7mmD Implant Guide Pin for 4.7mmD Implant Guide Pin for 57mmD Implant 5037-07

5047-07

5057-07

o

12 Angled Abutment Head Double Lead Threads

Compatible with Zimmer’s Tapered Screw-Vent® drills

Single Lead Threads

o

12 angled head of Redirect implant requires minimum of 1mm clearance on either side of implant body to allow for free rotation during implant placement.

15


ScrewPlant & ScrewPlus Fixture-Mount Packaging The implant is mounted on a color-coded fixture-mount designed for use as a transfer & shortened for use as a straight abutment. A snap-on comfort cap is provided for the modified abutment. A cover screw is included in each vial. The ScrewPlant & ScrewPlus also include a 2mm extender retained by the cover screw for use as a healing collar.

Prepare surgical site with double cutting drill

All of Implant Direct’s implants come in a sterile vial

Each label is color-coded with two tear-off labels

Each cap is color-coded by platform diameter of implant

Drop implant assembly out of vial onto a sterile surface

Remove implant assembly with a fixture-mount drill or ratchet

Insert implant into osteotomy

Index fixture-mount flat to labial

Remove the holder containing the cover screw & comfort cap

Snap-on comfort cap is located in the top portion of holder

Flat of hex indexed to buccal

Remove fixture-mount

Align the flat of the fixture-mount to the buccal

Attach fixture-mount to corresponding color-coded implant analog

Remove colored section from fixture-mount through groove creating a final straight abutment

To attach abutment, use 30Ncm in hard bone. In soft bone, use only finger pressure

Test retention & rotate if necessary to increase retention

16

Check for occlusal clearance prior to attaching comfort cap

Suture soft tissue around comfort cap


Clinical & Laboratory Procedures for Contoured Abutments Orienting the 15º Angled Abutment The flat side of the Fixture-Mount/Transfer [Fig. 1] & the angle of the 15° abutment [Fig. 2] are manufactured to align with the flat of the implant’s internal hexagon.

Fig. 2 The two-piece, 15º Angled Abutment consists of an angled body and a Fixation Screw

Fig. 1

Fixture Mount/Transfer

To establish the optimum angle of the abutment, index the flat surface of the Fixture-Mount/Transfer either toward or away from the desired direction of abutment angle at the time of implant placement.

Option 1 : Attaching an Angled Abutment & chairside procedures for preparation Attach the abutment with the 1.25mmD hex tool

Remove the healing collar with a 1.25mmD hex tool

Mark the required modifications to achieve appropriate clearance

Detach the abutment with the 1.25mmD hex tool

Attach the abutment to the corresponding implant analog & reduce the abutment to achieve appropriate clearance

Option 2 : Stage-One transfer followed by laboratory procedures for abutment preparation & provisionalization

During implant placement, index the flat of the fixture-mount

Block out the top of the fixture-mount & make a transfer impression

Attach the cover screw & submerge implant

Attach the fixturemount to the implant analog & seat into the negative of the impression

Pour the working cast in dental stone with soft tissue replication material

Remove the fixturemount from the working cast with the 1.25mmD hex tool

Attach the angled abutment to the implant analog in the working cast with a 1.25mmD hex tool

Modify angle of abutment & refine margins as required

Fabricate the temporary crown

At stage-2 surgery, attach the prepared abutment & tighten to 30 Ncm with a torque wrench

Occlude screw access hole & confirm contour of restoration

Cement the provisional restoration

Common procedures for abutment placement, margin finessing, impressing & placement of restoration Tighten to 30 Ncm with a torque wrench

Finesse the margins with a high-speed bur & copious irrigation prior to final impressing

Make an impression following standard clinical procedures

Attach provisional restoration & cement onto the prepared abutment

Follow standard laboratory procedures to fabricate the final restoration & cement onto the prepared abutment

17


ScrewIndirect Implant Prosthetic Technique

4000-69

1000-01 1000-05

1000-10

1. Use a forceps to remove the comfort caps exposing the tops of the implants.

2. Select the Titanium Temporary Coping matching the prosthetic platform. Titanium Coping [4000-69] is supplied with fixation screws [1000-01] and [1000-05]. An optional longer screw [1000-10] is also available.

3. Place the fixation screw through the coping & tighten using the 1.25mmD Hex Tool. Standard torque value for fixation screws is 30Ncm.

4. Confirm there is less than 40 degrees of relative divergence between copings to be splinted together.

5. Mark top of Titanium Temporary Copings with indelible marker. Place denture on top of copings to transfer their position to under surface of denture.

6. Confirm markings on under surface of denture. Use acrylic trimmer to drill holes through denture corresponding to marked positions.

7. Seat denture over Titanium Temporary Copings to confirm passive placement. Mark copings to indicate required vertical reduction prior to luting to denture base.

8. Occlude screw access hole with cotton pellet. Use autopolymerizing acrylic or similar light cure material to attach prosthesis to Titanium Temporary Copings. Allow to set prior to removal from mouth.

9. Remove prosthesis from the mouth and flip over to expose tissue side. Use additional autopolymerizing resin to fill in any voids around the processed copings.

10a & b. Attach implant replicas to copings and tighten using 1.25mmD Hex Tool. Pour a working cast using a soft tissue replication material if required due to anatomical undercuts.

11. Remove prosthesis from working cast and trim to allow access for patient cleaning. The prosthesis is now a fixed restoration, removable by clinician only.

12. Attach prosthesis to implants & tighten in place using the appropriate tooling. Occlude screw access holes with material of choice.

18


GoDirect Implant GPS Attachment Prosthetic Technique

Tissue height Tissue height Bone height

Bone height

1. Use the black plastic component to carry the GoDirect implant to site. Initiate self-tapping of implant into osteotomy by rotating black carrier. Remove black plastic carrier once implant is stabilized.

2. Use either the [GDT] or [GDIT for 4.7mmD] insertion tool or [GDD] insertion drill to rotate the GoDirect implant into the osteotomy. Stabilize the assembly with downward finger pressure.

3. The gold colored section of the implant should extend a minimum of 1.5mm above the soft tissue.

4. Attach the Parallel Posts [1000-97] to the implants to determine the divergence If the relative divergence between two assemblies is less than 20째 use the white, red, orange or green GPS Male.

05a. Chairside Process: Place the White BlockOut Spacer over the head of the implant. Attach the metal cap with Black Processing Male from Processing Cap/Kit [1000-98S] or [1000-98SI].

5b. Chairside Process: Mark location of components on under surface of prosthesis. Relieve the areas within the prosthesis so it can be fully seated over the metal cap without interference. Process the cap into denture following standard procedures.

6a. Transfer Process: Place the Impression Coping [4500-02] onto the implant. Inject impression material around the coping & record a full-arch impression.

6b. Laboratory Procedure: Insert the Implant Analogs [4500-06] into the Impression Copings [4500-02]. The laboratory fabricates the working cast.

7. Place the white Block-Out Spacer over the head of the Implant Analog. Attach the metal cap with Black Processing Male. Process the denture following standard procedures.

8. Pull on the Black Processing Male at an angle & remove it from the metal cap. If needed, wedge a tool against the bottom inside of the black plastic to aid in removal.

9. Use the Male Seating Tool to firmly push the Replacement Male of choice into the empty metal cap located within the denture.

10. Insert the finished prosthesis. Instruct patient on standard cleaning instructions.

19


ScrewPlant/ScrewPlus Selection Chart

4.7mmD

3.7mmD Platform

Fixture Mount ScrewPlant

Fixture Mount ScrewPlus

Fixture Mount ScrewPlant

Cover Screws, Healing Collars, Implant Transfers & Analogs 1037-01

1037-13 1037-13N

Straight Abutments, Comfort Caps, Transfers & Analogs

Engaging & Non-Engaging Abutments

1037-05 1037-05N

1037-08 1037-08N

1037-06

1047-01

1047-13 1047-13N

1047-15 1047-15N

1037-31 1037-32

1037-21

1037-40

1037-23

1037-51-15C 1037-51-08C 1037-30L 1037-52-15C 1037-52-08C

1037-51 1037-52

1037-46

1037-71

1037-22

3037

3037-02

1037-31C 1037-32C

1047-05 1047-05N

3047-26

3037-26

1037-21N 1037-22N

Straight & Angled Contoured & Laboratory Abutments

1037-15 1037-15N

1037-47

1037-72

1037-49

1037-73

1047-21N 2047-20 1047-22N

1047-31 1047-32

3047-02

1047-31C 1047-32C

1047-40

1037-74

3047

1047-51 1047-52

1047-51-15C 1047-52-15C

1047-46

1047-71

1047-72

1047-61

1047-62

Ball, Screw-Receiving & GPS Abutments 1037-61

1037-91

20

1037-92

1037-62

1037-93

1037-64

1037-94

1037-95

1047-91

1047-92

1047-93


Platform

5.7mmD Platform

Fixture Mount ScrewPlus

1047-06

1047-08 1047-08N

6.5mmD Platform

Fixture Mount ScrewPlant

1057-01

Fixture Mount ScrewPlus

1057-13

1057-15

1057-05

1057-08

1057-06

Fixture Mount ScrewPlus

2065-01

2065-13

3057-26

1047-21

1047-22

1047-23

1047-30L

2057-20

1057-21

1047-47

1047-49

1047-73

1047-74

1047-64

1047-94

1047-95

1057-31

1057-71

1057-61

1057-92

1057-22

1057-23

2065-08

2065-06

2065-20 3065-02

3057

1057-32

1057-40

2065-05

3065-26

3057-02

1047-51-08C 1047-52-08C

2065-15

1057-51

1057-46

1057-72

1057-52

1057-47

1057-73

1057-62

1057-93

1057-94

3065

1057-30L

1057-49

2065-40

2065-46

2065-47

2065-49

1057-74

1057-64

1057-95

21


Cover Screws, Healing Collars, Transfers & Analogs Replacement Surgical Cover Screws

Requires 1.25mmD Hex Tool

Code 1037-01 1047-01 1057-01 2065-01

Platform 3.7mmD 4.7mmD 5.7mmD 6.5mmD

Healing Collars

1037-01

1047-01

1037-13N

1047-13N

1037-13

1047-13

1037-15N

1047-15N

1037-15

1047-15

1057-01

2065-01

1057-13

2065-13

1057-15

2065-15

Requires 1.25mmD Hex Tool

Code 1037-13N 1037-13 1037-15N 1037-15 1047-13N 1047-13 1047-15N 1047-15 1057-13 1057-15 2065-13 2065-15

Platform 3.7mmD 3.7mmD 3.7mmD 3.7mmD 4.7mmD 4.7mmD 4.7mmD 4.7mmD 5.7mmD 5.7mmD 6.5mmD 6.5mmD

Closed-Tray Implant Transfers

Code 1037-05N 1037-05 1047-05N 1047-05 1057-05 2065-05

Width 3.8mmD 4.8mmD 3.8mmD 4.8mmD 4.8mmD 5.8mmD 4.8mmD 5.8mmD 6.6mmD 6.6mmD 7.4mmD 7.4mmD

Length 3mmL 3mmL 5mmL 5mmL 3mmL 3mmL 5mmL 5mmL 3mmL 5mmL 3mmL 5mmL

Includes Fixation Screw

Platform 3.7mmD 3.7mmD 4.7mmD 4.7mmD 5.7mmD 6.5mmD

Open-Tray Implant Transfers

Replacement Screw 1000-06 1000-06 1000-06 1000-06 1000-06 1000-06

1037-05N

1037-05

1057-05

1047-05N

1047-05

2065-05

1037-08N

1037-08

1057-08

1047-08N

1047-08

2065-08

1057-06

2065-06

1000-06

Includes Fixation Screw

Code 1037-08N 1037-08 1047-08N 1047-08 1057-08 2065-08

Platform 3.7mmD 3.7mmD 4.7mmD 4.7mmD 5.7mmD 6.5mmD

Replacement Screw 1000-10 1000-10 1000-10 1000-10 1000-10 1000-10

1000-10

Implant Analogs

Code 1037-06 1047-06 1057-06 2065-06

22

Platform 3.7mmD 4.7mmD 5.7mmD 6.5mmD

1037-06

1047-06


Straight Abutments, Snap-on Transfers and Lab Analogs Straight Abutments

Includes Transfer, Comfort Cap & Fixation Screw [1000-01]

Code 1037-21N 1037-22N 1037-21 1037-22 1037-23 2047-20 1047-21N 1047-22N 1047-21 1047-22 1047-23 2057-20 1057-21 1057-22 1057-23 2065-20

Platform 3.7mmD 3.7mmD 3.7mmD 3.7mmD 3.7mmD 4.7mmD 4.7mmD 4.7mmD 4.7mmD 4.7mmD 4.7mmD 5.7mmD 5.7mmD 5.7mmD 5.7mmD 6.5mmD

Collar Heights 1mm 2mm 1mm 2mm 3mm 0mm 1mm 2mm 1mm 2mm 3mm 0mm 1mm 2mm 3mm 0mm

Use Analog 3037 3037 3047 3047 3047 3047 3047 3047 3057 3057 3057 3057 3065 3065 3065 3065

1037-21N

1047-21N

1037-22N

1047-22N

1037-21

1047-21

1057-21

2047-20

1037-22

1047-22

1057-22

2057-20

1037-23

1047-23

1057-23

2065-20

Straight Abutment Transfers

Code 3037-02 3047-02 3057-02 3065-02

Abutment Width 3.7mmD 4.7mmD 5.7mmD 6.5mmD

3037-02

3047-02

3057-02

3065-02

Straight Abutment Comfort Caps

Code 3037-26 3047-26 3057-26 3065-26

Platform 3.7mmD 4.7mmD 5.7mmD 6.5mmD

Code 3037 3047 3057 3065

Platform 3.7mmD 4.7mmD 5.7mmD 6.5mmD

3037-26

3047-26

3057-26

3065-26

3037

3047

3057

3065

3037-28

3047-28

3057-28

3065-28

Straight Abutment Analogs

Straight Abutment Castable Copings

Code 3037-28 3047-28 3057-28 3065-28

Platform 3.7mmD 4.7mmD 5.7mmD 6.5mmD

23


Straight & Angled Contoured, Titanium & Zirconia Abutments Straight Titanium Contoured Abutments

Code 1037-31 1037-32 1047-31 1047-32 1057-31 1057-32

Includes Fixation Screw [1000-01]

Platform 3.7mmD 3.7mmD 4.7mmD 4.7mmD 5.7mmD 5.7mmD

Straight Zirconia Contoured Abutments

Code 1037-30CB 1037-31C 1037-32C 1047-30CB 1047-31C 1047-32C

Platform 3.7mmD 3.7mmD 3.7mmD 4.7mmD 4.7mmD 4.7mmD

24

1047-31

1057-31

1037-32

1047-32

1057-32

Collar Heights .5mm 1.5mm 2.5mm .5mm 1.5mm 2.5mm

1037-30CB

1037-31C

1037-32C

1047-30CB

1047-31C

1047-32C

1037-51

1047-51

1057-51

1037-52

1047-52

1057-52

Includes Fixation Screw [1000-01]

Platform 3.7mmD 3.7mmD 4.7mmD 4.7mmD 5.7mmD 5.7mmD

8° & 15° Zirconia Contoured Abutments

Code 1037-51-08C 1037-51-15C 1037-52-08C 1037-52-15C 1047-51-08C 1047-51-15C 1047-52-08C 1047-52-15C

1037-31

Includes Fixation Screw [1000-01]

Angled Titanium Contoured Abutments

Code 1037-51 1037-52 1047-51 1047-52 1057-51 1057-52

Collar Heights 1mm 2mm 1mm 2mm 1mm 2mm

Angulation 15° 15° 15° 15° 15° 15°

Collar Heights 1mm 2mm 1mm 2mm 1mm 2mm

Includes Fixation Screw [1000-01]

Platform 3.7mmD 3.7mmD 3.7mmD 3.7mmD 4.7mmD 4.7mmD 4.7mmD 4.7mmD

Angulation 8° 15° 8° 15° 8° 15° 8° 15°

Collar Heights 1.5mm 1.5mm 2.5mm 2.5mm 1.5mm 1.5mm 2.5mm 2.5mm

1037-51-08C

1037-51-15C

1037-52-08C

1037-52-15C

1047-51-08C

1047-51-15C

1047-52-08C

1047-52-15C


Lab, Engaging & Non-Engaging Abutments Full Contour Platform Switching Abutments

Includes Fixation Screw [1000-01]

Code 1037-30L 1047-30L 1057-30L

Platform 3.7mmD 4.7mmD 5.7mmD

Gold Engaging Cast-to Abutments

1037-30L

1047-30L

Platform 3.7mmD 4.7mmD 5.7mmD 6.5mmD

Plastic Non-Engaging Castable Abutments

Collar Heights 1mm 1mm 1mm 1mm

1037-40

1047-40

1057-40

Platform 3.7mmD 4.7mmD 5.7mmD 6.5mmD GoDirect Implant only

Plastic Engaging Temporary Abutments

Code 1037-47 1047-47 1057-47 2065-47

Collar Heights 0mm 0mm 0mm 0mm 0mm

1037-46

1047-46

1057-46

4500-46

Includes Fixation Screw [1000-06]

Platform 3.7mmD 4.7mmD 5.7mmD 6.5mmD

Titanium Non-Engaging Temporary Abutments

Collar Heights 0mm 0mm 0mm 0mm

1037-47

1047-47

1057-47

2065-47

1037-49

1047-49

1057-49

2065-49

Includes Fixation Screw [1000-01]

Platform 3.7mmD 4.7mmD 5.7mmD 6.5mmD

Collar Heights 0mm 0mm 0mm 0mm

Replacement Fixation Screws

Code 1000-01 1000-06 1000-10

2065-40

Includes Fixation Screw [1000-01]

2065-46

Code 1037-49 1047-49 1057-49 2065-49

1057-30L

Includes Fixation Screw [1000-01]

Code 1037-40 1047-40 1057-40 2065-40

Code 1037-46 1047-46 1057-46 2065-46 4500-46

Collar Heights 1mm 1mm 1mm

Description Short Fixation Screw Fixation Screw Long Fixation Screw

Closed-Tray Transfer & Temporary Abutment

Open-Tray Transfer & Waxing Screw

Abutments

1000-01

1000-06

1000-10

25


Selection Chart: Overdenture & Screw-Retained Restorations 3.7mmD Platform

4.7mmD Platform

5.7mmD Platform

6.5mmD Platform

Screw-Receiving Overdenture Abutments (*Includes Transfer and Comfort Cap) 1037-61 1037-62 1037-64

Overdenture Abutments

1047-61 1047-62 1047-64

1057-61 1057-62 1057-64

Screw-Receiving Overdenture Abutment Transfers, Analog & Comfort Cap Open-Tray Transfer

OD Abutment Comfort Cap Transfers & Analog *4000-13

1000-61

*1000-68

Closed-Tray Transfer

1000-62

1000-63

Overdenture Screw-Retained Copings Overdenture Abutment Components

1000-64

1000-65

Gold

1000-66

Titanium

Plastic

1000-67

Gold/Plastic

1000-69

Titanium

Ball Abutments (**Includes Transfer and Comfort Cap) 1037-71 1037-72 1037-73 1037-74

Ball Abutments

1047-71 1047-72 1047-73 1047-74

1057-71 1057-72 1057-73 1057-74

Ball Attachments

Ball Abutment Components **1000-87

**1000-84

1000-85

1000-81

1000-82

1000-88

1000-83

1000-86

GPS Abutments (***Includes Transfer, Abutment Housing Kit and Comfort Cap) GPS Abutments

1037-91 1037-92 1037-93 1037-94 1037-95

1047-91 1047-92 1047-93 1047-94 1047-95

1057-92 1057-93 1057-94 1057-95

GPS Attachments

GPS Abutment Components ***4500-26 ***1000-94

26

1000-95

1000-92C

1000-92G

1000-92R

1000-92E

1000-92P

1000-92B

1000-92W

1000-93

***1000-91

1000-98S

1000-98SI

1000-96


Screw-Receiving, Ball & GPS Abutments Includes Transfer & Comfort Cap [Requires 1.25mmD Hex Tool]

Screw-Receiving Overdenture Abutments

Code 1037-61 1037-62 1037-64 1047-61 1047-62 1047-64 1057-61 1057-62 1057-64

Platform 3.7mmD 3.7mmD 3.7mmD 4.7mmD 4.7mmD 4.7mmD 5.7mmD 5.7mmD 5.7mmD

Ball Abutments

1037-61

1037-62

1037-64

1047-61

1047-62

1047-64

1057-61

1057-62

1057-64

Includes Transfer & Comfort Cap [Requires 1.25mmD Hex Tool]

Code 1037-71 1037-72 1037-73 1037-74 1047-71 1047-72 1047-73 1047-74 1057-71 1057-72 1057-73 1057-74

GPS Abutments

Collar Heights 1mm 2mm 4mm 1mm 2mm 4mm 1mm 2mm 4mm

Platform 3.7mmD 3.7mmD 3.7mmD 3.7mmD 4.7mmD 4.7mmD 4.7mmD 4.7mmD 5.7mmD 5.7mmD 5.7mmD 5.7mmD

Collar Heights 1mm 2mm 3mm 4mm 1mm 2mm 3mm 4mm 1mm 2mm 3mm 4mm

1037-71

1037-72

1037-73

1037-74

1047-71

1047-72

1047-73

1047-74

1057-71

1057-72

1057-73

1057-74

Includes Transfer, Comfort Cap, GPS Abutment Housing Kit, & White Male Liner [Requires 1.25mmD Hex Tool] *Abutment only

Code 1037-91 1037-92 1037-93 1037-94 1037-95 1047-91 1047-92 1047-93 1047-94 1047-95 1057-92 1057-93 1057-94 1057-95 4000-92 2000-92

Platform 3.7mmD 3.7mmD 3.7mmD 3.7mmD 3.7mmD 4.7mmD 4.7mmD 4.7mmD 4.7mmD 4.7mmD 5.7mmD 5.7mmD 5.7mmD 5.7mmD

Collar Heights 1mm 2mm 3mm 4mm 5mm 1mm 2mm 3mm 4mm 5mm 2mm 3mm 4mm 5mm 2mm

1037-91

1037-92

1037-93

1037-94

1037-95

1047-91

1047-92

1047-93

1047-94

1047-95

1057-92

1057-93

1057-94

1057-95

ScrewIndirect GPS Abutment GPS Bar Abutment with M2 thread—2 ea*

4000-92

2000-92

27


Ancillary Components for Overdenture & Screw-Retained Restorations Overdenture Abutment Comfort Cap, Transfers & Analog

Code 1000-61 1000-62 1000-63 1000-68 4000-13 1000-14 1000-15

Platform 5.0mmD 5.0mmD 5.0mmD 5.0mmD 5.0mmD -

Description Aluminum Analog Open-Tray Transfer plus Fixation Screw Closed-Tray Transfer plus Fixation Screw Plastic Abutment Transfer - 2ea Plastic Comfort Cap - 2ea Replacement Open-Tray Fixation Screw - 2ea Replacement Closed-Tray Fixation Screw - 2ea

Overdenture Abutment Components

Code 1000-64 1000-65 1000-66 1000-67 1000-69 1000-05

Screws require 1.25mmD Hex Tool

1000-61

1000-62

1000-63

1000-68

4000-13

Includes Fixation Screw [1000-05]

Platform 5.0mmD 5.0mmD 5.0mmD 5.0mmD 5.0mmD -

Description Gold Coping Titanium Coping Plastic Coping Gold & Plastic Coping Titanium Temporary Coping Coping Fixation Screw - 2ea

1000-05

1000-64

1000-65

1000-66

1000-67 1000-69

Ball Abutment Components

Code 1000-81 1000-82 1000-83 1000-84 1000-85 1000-86 1000-87 1000-88

Description Ball Abutment Housing - 2ea Nylon Liner - 2ea Nylon Liner Transfer - 2ea Ball Abutment Transfer - 2ea Ball Abutment Analog Ball Abutment Tools Ball Abutment Comfort Cap - 2ea Ball Abutment Housing & Nylon Liner

1000-81

1000-82

1000-83

1000-84

1000-85

1000-87

1000-86

1000-88

GPS Abutment Transfer, Analogs & Alignment Tools

Code 1000-94 1000-95 1000-97 1000-10 4500-26 1000-99

Description Impression Coping - 2ea Abutment Analog 4mmD - 2ea Abutment Parallel Post - 4ea Guide Screw for ScrewPlant/ScrewPlus - 2ea Comfort Cap - 2ea Plastic Abutment Angle Measure Guide

4500-26

1000-97

1000-10 1000-94

1000-99

1000-95

GoDirect & GPS Abutment Components

Code 1000-92W 1000-92P 1000-92B 1000-92C 1000-92G 1000-92E 1000-92R 1000-91 1000-93 1000-98SI 1000-98S

Retention Force 5.0lbs 3.0lbs 1.5lbs 4.5lbs 3.0lbs 2.0lbs 1.0lb Assorted Assorted

Description Internal Replacement Male White - 4ea Internal Replacement Male Pink - 4ea Internal Replacement Male Blue - 4ea External Replacement Male Clear - 4ea External Replacement Male Green - 4ea External Replacement Male Orange - 4ea External Replacement Male Red - 4ea GPS Abutment Housing Kit - 1ea Black Processing Male - 4ea Internal Processing Cap/Male Kit - 1ea External Processing Cap/Male Kit - 1ea

1000-92W

1000-93

1000-92C

1000-92G 1000-92P 1000-92E

1000-92B

1000-98SI

1000-92R

GPS Instrumentation

Code 1000-96

28

Description Core Tool - Male Removal & Seating Tool

1000-91

1000-96

1000-98S


Surgical & Prosthetic Ins truments Tapered Hex Tools

Code THT1.25 THT1.25S Straight Hex Tools

Description 1.25mmD Tapered Hex Tool-Long 1.25mmD Tapered Hex Tool-Short

THT1.25

THT1.25S

Square connection for use with Ratchet or Torque Wrench

Code HT1.25L HT1.25 HT1.25S HT2.0 HT2.0S HT2.5 HT2.5S HT3.0 HT3.0S Hex Drills

Description 1.25mmD Straight Hex Tool Extra Long (For use with Torque Wrench) 1.25mmD Straight Hex Tool Long (For use with Torque Wrench) 1.25mmD Straight Hex Tool Short (For use with Torque Wrench) 2.0mmD Straight Hex Tool Long 2.0mmD Straight Hex Tool Short 2.5mmD Straight Hex Tool Long (with retentive O-ring) 2.5mmD Straight Hex Tool Short (with retentive O-ring) 3.0mmD Straight Hex Tool Long 3.0mmD Straight Hex Tool-Short

HT1.25

HT2.0

HT2.5

HT3.0

HT1.25S

HT2.0S

HT2.5S

HT3.0S

HT1.25L

Latch head connection for use with Surgical Motor

Code HD1.25 HD2.0 HD2.5 HD3.0

Description 1.25mmD Hex Drill 2.0mmD Hex Drill 2.5mmD Hex Drill (with retentive O-ring) 3.0mmD Hex Drill

Code R TW30 TW35 SSH2.5 FMD PAR LDRILL DE TWM ABH

Description Ratchet 30Ncm Torque Wrench 35Ncm Torque Wrench 2.5mmD Stainless Steel Handle (with retentive O-ring) Fixture Mount Drill (with retentive O-ring) Paralleling Tool 2.8/2.3 Locator Drill (2.3mmD) Drill Extender Multi-Setting Torque Wrench (15, 20, 25, 30, 35, 40, 45, 50 & 60Ncm) Analog Holder

HD1.25

HD2.0

HD2.5

HD3.0

R

TW30

TW35

SSH2.5

FMD

PAR

LDRILL

DE

Ancillary Instruments

TWM

ABH

Surgical Trays

Code ST BST CST

Description Empty Surgical Kit for Spectra System Implants Basic Surgical Kit for Spectra System Implants Complete Surgical Kit for Spectra System Implants

ST

BST

CST

29


Surgical Drills 3.0mmD Implants

SD2.3

Code SD2.3 SD2.3S SD2.8 SD2.8S CBD3.2

30

CBD3.7

SD3.8

SD3.8S

CBD4.2

SD4.4

SD4.4S

CBD4.7

SD4.8

SD4.8S

CBD5.2

D5.1S

SD5.4

SD5.4S

Description 4.8/4.4mmD Step Drill with 6-16 markings 4.8/4.4mmD Step Drill with 6-10 markings Cortical Bone Drill for 5.2mmD Implants

5.7mmD Implants

D5.1

Code D5.1 D5.1S SD5.4 SD5.4S CBD5.7

SD3.4S

Description 4.4/3.8mmD Step Drill with 6-16 markings 4.4/3.8mmD Step Drill with 6-10 markings Cortical Bone Drill for 4.7mmD Implants

Optional Drills

Code SD4.8 SD4.8S CBD5.2

SD3.4

CBD3.2

Description 3.8/3.4mmD Step Drill with 6-16 markings 3.8/3.4mmD Step Drill with 6-10 markings Cortical Bone Drill for 4.2mmD Implants

4.7mmD Implants

Code SD4.4 SD4.4S CBD4.7

SD2.8S

Description 3.4/2.8mmD Step Drill with 6-16 markings 3.4/2.8mmD Step Drill with 6-10 markings Cortical Bone Drill for 3.7mmD Implants

Optional Drills

Code SD3.8 SD3.8S CBD4.2

SD2.8

Description 2.3/2.0mmD Step Drill with 6-16 markings 2.3/2.0mmD Step Drill with 6-10 markings 2.8/2.3mmD Step Drill with 6-16 markings 2.8/2.3mmD Step Drill with 6-10 markings Cortical Bone Drill for 3.0 and 3.2mmD Implants

3.7mmD Implants

Code SD3.4 SD3.4S CBD3.7

SD2.3S

Description 5.1mmD Straight Drill with 6-16 markings 5.1mmD Straight Drill with 6-10 markings 5.4/4.8mmD Step Drill with 6-16 markings 5.4/4.8mmD Step Drill with 6-10 markings Cortical Bone Drill for 5.7mmD Implants

CBD5.7


Spectra System Drill Seque nce 3.0mmD Tapered Implant Body Soft Bone Final

Dense Bone Final

Optional Bone Contour

CBD3.2

SD2.3

SD2.8

2.3/2.0mmD

2.8/2.3mmD

Soft Bone Final

Dense Bone Final

Optional Bone Contour

CBD3.7

3.7mmD Tapered Implant Body

SD2.3

SD2.8

SD3.4

2.3/2.0mmD

2.8/2.3mmD

3.4/2.8mmD

Soft Bone Final

Dense Bone Final

Optional Bone Contour

CBD4.7

4.7mmD Tapered Implant Body Optional

SD2.3

SD2.8

SD3.4

SD3.8

SD4.4

2.3/2.0mmD

2.8/2.3mmD

3.4/2.8mmD

3.8/3.4mmD

4.4/3.8mmD

Soft Bone Final

Dense Bone Final

Optional Bone Contour

CBD5.7

5.7mmD Tapered Implant Body Optional

Optional

Optional

SD2.3

SD2.8

SD3.4

SD3.8

SD4.4

SD4.8

D5.1

SD5.4

2.3/2.0mmD

2.8/2.3mmD

3.4/2.8mmD

3.8/3.4mmD

4.4/3.8mmD

4.8/4.4mmD

5.1mmD

5.4/4.8mmD

31


32

HD1.25

FMD

HD2.0

HT2.0S

HT2.0

SD2.8S

HT3.0S

HD3.0

HD2.5

HT3.0

SD3.4

HT2.5S

HT2.5

CBD3.2

R

SSH2.5

Lower level of surgical tray

HT1.25S

THT1.25S

SD2.8

HT1.25

SD2.3S

THT1.25

SD2.3 SD3.4S

CBD3.7

SD3.8

SD3.8S CBD4.2

CBD4.7

Place for the

SD4.4S SD4.8

SD4.8S

InterActive System Tools Coming Soon

SD4.4

CBD5.2

PAR (4)

LDRILL

D5.1S

DE

SD5.4S

CBD5.7

SD5.4

D5.1

Complete Surgical Tray Contents


Surgical Tray

Lid

Code ST SD2.3 SD2.3S SD2.8 SD2.8S CBD3.2 SD3.4 SD3.4S CBD3.7 SD3.8 SD3.8S CBD4.2 SD4.4 SD4.4S CBD4.7 SD4.8 SD4.8S CBD5.2 D5.1 D5.1S SD5.4 SD5.4S CBD5.7 THT1.25 THT1.25S HT1.25 HT1.25S HT2.0 HT2.0S HT2.5 HT2.5S HT3.0 HT3.0S HD1.25 HD2.0 HD2.5 HD3.0 FMD LDRILL DE R PAR (x4) SSH2.5

Surgical Tray Contents Description Empty Surgical Tray 2.3/2.0mmD Step Drill-Long 2.3/2.0mmD Step Drill-Short 2.8/2.3mmD Step Drill-Long 2.8/2.3mmD Step Drill-Short 3.2mmD Cortical Drill 3.4/2.8mmD Step Drill-Long 3.4/2.8mmD Step Drill-Short 3.7mmD Cortical Drill 3.8/3.4mmD Step Drill-Long 3.8/3.4mmD Step Drill-Short 4.2mmD Cortical Drill 4.4/3.8mmD Step Drill-Long 4.4/3.8mmD Step Drill-Short 4.7mmD Cortical Drill 4.8/4.4mmD Step Drill-Long 4.8/4.4mmD Step Drill-Short 5.2mmD Cortical Drill 5.1mmD Straight Drill-Long 5.1mmD Straight Drill-Short 5.4/4.8mmD Step Drill-Long 5.4/4.8mmD Step Drill-Short 5.7mmD Cortical Drill Hex Tools 1.25mmD Tapered Hex Tool-Long 1.25mmD Tapered Hex Tool-Short 1.25mmD Straight Hex Tool-Long 1.25mmD Straight Hex Tool-Short 2.0mmD Straight Hex Tool-Long 2.0mmD Straight Hex Tool-Short 2.5mmD Straight Hex Tool-Long 2.5mmD Straight Hex Tool-Short 3.0mmD Straight Hex Tool-Long 3.0mmD Straight Hex Tool-Short 1.25mmD Hex Drill 2.0mmD Hex Drill 2.5mmD Hex Drill 3.0mmD Hex Drill Ancillary Instrumentation Fixture Mount Drill Locator Drill Drill Extender Ratchet Paralleling Tool 2.8/2.3 2.5mmD Stainless Steel Handle

Empty Tray

Inside

Complete Kit

Basic Kit

Conversion Kit

Call for Price

Call for Price

Call for Price

X X X X X X X X X X X X X X X X X X X X X X X

X X

X

X X X X X X X X X X X X X X

X

X X X X X X

X X X

X

X X X X

X

X

X X X X

X X X

X X X X X X X X

X X X X

33


Customer Service & Technical Support online, over the phone, or in your o ce

Five Year Warranty2

Reality Check Zimmer Customers

ScrewPlant® and ScrewPlus® Implants

Comfort Cap

Cover Screw

Healing Collar

All-in-1 Packaging includes implant, abutment, transfer, cover screw, healing collar & comfort cap

ScrewPlant and ScrewPlus Implant Advantages: Internal Hex with External Bevel Internal Hex connection prevents rotation of prosthetic components External Bevel for added support

ScrewPlant

ScrewPlus

Bone Level 2-Stage

Tissue Level 1-Stage

Surgical Compatibility with Tapered Screw-Vent® No need to change surgical protocol or tools

Micro-Threads Reduce crestal stress for improved initial stability

Double-Lead Threads For faster insertion with Standard “V” threads matching Screw-Vent®

Tapered Body Facilitates soft bone expansion

Laboratory Straight Straight 15° Angled Gold/ Abutment Snap-On Contoured Contoured Plastic

Zirconia/Ti Abutment

Angled Zirconia/Ti Abutment

Plastic Ball GPS™ Screw Temporary Abutment Attachment Attachment Receiving

www.implantdirect.com.mx | 01 800 365-5000 10K-01-13-0045 Printed in the U.S.A. Copyright © 2012 Implant Direct Sybron International. All Rights Reserved

Spectra - Productos  

Sistema Spectra Catalogo de Productos

Read more
Read more
Similar to
Popular now
Just for you