External lighting systems - read part 1 by iGuzzini illuminazione

External lighting systems

2011-2012

read part 1

Headquarters iGuzzini illuminazione spa 62019 Recanati, Italy via Mariano Guzzini, 37 PO Box 56.75.103 Tel. (+39) 071.75881 Fax (+39) 071.7588295 iguzzini@iguzzini.it www.iguzzini.com video: (+39) 071.7588453

Subsidiaries BELGIUM Belgium and Luxemburg iGuzzini illuminazione Benelux Bvba/Sprl Residentie "Het Museum II" Museumstraat 11, BUS A B-2000 Antwerpen Tel. (+32) 03 2411400 Fax (+32) 03 2486648 info@iguzzini.be THE NETHERLANDS iGuzzini illuminazione Benelux Bvba/Sprl Costerweg, 5 6702 AA Wageningen Tel. (+31) 3.17497865 Fax (+31) 3.17497866 info@iguzzini.nl CHINA iGuzzini Lighting (China) Co., Ltd No. 2758 Huan Cheng West Road Fengxian Industrial Park Shanghai 201401 Tel. (+86) 021.634111 99 Fax (+86) 021.336552 01 info@iguzzini.cn DENMARK iGuzzini illuminazione Danmark Filial af iGuzzini illuminazione Spa, Italien Værkstedsmagasinet Refshalevej 153A, 2 1432 København K Tel. (+45) 33179595 Fax (+45) 33179596 info@iguzzini.dk

FINLAND iGuzzini Finland & Baltic Oy Lemuntie, 3-5 00510 Helsinki Tel. (+358) 207 289840 Fax (+358) 9 8024566 iguzzini@iguzzini.fi FRANCE iGuzzini illuminazione France 10 boulevard de la Bastille 75012 Paris Tel. (+33) 1.40528181 Fax (+33) 1.40528182 iguzzini@iguzzini.fr GERMANY iGuzzini illuminazione Deutschland GmbH - Zentrale Bunsenstrasse, 5 82152 Planegg Tel. (+49) 089.8569880 Fax (+49) 089.85698833 info@iguzzini.de HONG KONG-MACAO-TAIWAN iGuzzini Hong Kong Limited Units 803 & 805 8th Floor Tower I Enterprise Square I No.9 Sheung Yuet Road Kowloon, Hong Kong Tel. (+852) 25166504 Fax (+852) 28562981 iguzzini@iguzzini.com.hk

NORTH AMERICA iGuzzini Lighting North America 5455 Rue De Gaspe, suite 100 Montréal, QC, CANADA H2T 3B3 Tel. 514 523 1339 - Fax 514 525 6107 383 Adelaide Street West Toronto, ON, CANADA M5V 1S4 Tel. 416 408 3995 - Fax 416 408 4269 827 Powell Street Vancouver, B.C., CANADA V6A 1H7 Tel. 604 215 1539 - Fax 604 215 1548 iGuzzini Lighting USA, Ltd 60 Madison Avenue, 2nd floor New York, NY 10010 - USA Tel. (+1) 212 4818188 NORWAY iGuzzini illuminazione Norge A.S. Brynsveien, 5 0667 Oslo Tel. (+47) 23067850 Fax (+47) 22648737 iguzzini.norge@iguzzini.no RUSSIA OOO "iGuzzini Illuminazione Russia Bolshaya Cherkizovskaya, 24/A 107553 Moscow Russian Federation Tel. (+7) 495.3802767 Fax (+7) 495.3802981 info@iguzzinirussia.ru SINGAPORE iGuzzini South East Asia 3 International Business Park Unit Nos. #02-18/19 Nordic European Centre 609927 Singapore Tel. (+65) 65677910 Fax (+65) 65679177 info@iguzzini.sg

SPAIN iGuzzini Illuminazione España S.A Polígono Industrial Can San Joan Avda. de la Generalitat, 168/170 08174 Sant Cugat del Vallès Barcelona Tel. (+34) 93.5880034 Fax (+34) 93.6999974 iguzzini@iguzzini.es SWEDEN iGuzzini Illuminazione Sweden Filial of iGuzzini Illuminazione S.p.A., Italy Åsögatan, 115 116 24 Stockholm Tel. (+46) 8.6151540 Fax (+46) 8.6152540 iguzzini@iguzzini.se SWITZERLAND iGuzzini illuminazione Schweiz AG Uetlibergstrasse, 194 8045 Zürich Tel. (+41) 044.4654646 Fax (+41) 044.4654647 info@iguzzini.ch UNITED KINGDOM iGuzzini illuminazione UK Ltd Astolat Way Astolat Business Park Off Old Portsmouth Road GU3 1NE Guildford Surrey Tel. (+44) 01483.468000 Fax (+44) 01483.468001 info@iguzzini.co.uk

Partner assistance ANTWERPEN Residentie “Het Museum II” Museumstraat 11, BUS A B-2000 Antwerpen Tel. (+32) 03.2411400 Fax (+32) 03.2486648 info@iguzzini.be BERLIN Heinrich-Heine-Str. 62d 10179 Berlin Tel. (+49) 030.8856110 Fax (+49) 030.88682900 GLASGOW Berkeley Street, 4 G3 7DW Glasgow Tel. (+44) 0141.2291322 Fax (+44) 0141.2485301 GUILDFORD Astolat Way Astolat Business Park Off Old Portsmouth Road GU3 1NE Guildford Surrey Tel. (+44) 01483.468000 Fax (+44) 01483.468001 info@iguzzini.co.uk

HAMBURG Rugenbarg, 67 22848 Norderstedt Tel. (+49) 040.52876812 Fax (+49) 040.52876813

MÜNCHEN Bunsenstrasse, 5 82152 Planegg Tel. (+49) 089.8569880 Fax (+49) 089.8569883

HELSINKI Lemuntie, 3-5 FI-00510 Helsinki Tel. (+358) 207289840 Fax (+358) 98024566 iguzzini@iguzzini.fi

NEW YORK 60 Madison Avenue, 2nd floor New York, NY 10010 - USA Tel. (+1) 212 4818188

KØBENHAVN Værkstedsmagasinet Refshalevej 153A, 2 1432 København K Tel. (+45) 33179595 Fax (+45) 33179596 info@iguzzini.dk MADRID Calle del General Oráa 70, 6ª planta 28006 Madrid Tel. (+34) 91.4345970 Fax (+34) 91.5017947 info.mad@iguzzini.es MILANO Via S.Damiano, 3 20122 Milano Tel. (+39) 02.7621161 Fax (+39) 02.76211641

OSLO Brynsveien, 5 0667 Oslo Tel. (+47) 23067850 Fax (+47) 22648737 iguzzini.norge@iguzzini.no PARIS 10 boulevard de la Bastille 75012 Paris Tel. (+33) 1.40528181 Fax (+33) 1.40528182 SHANGHAI iGuzzini Lighting Co., Ltd No. 2758 Huan Cheng West Road Fengxian Industrial Park Shanghai 201401 Tel. (+86) 021 6341 1199 Fax (+86) 021 3365 5201 info@iguzzini.cn

SINGAPORE 3 International Business Park Unit Nos. #02-18/19 Nordic European Centre Singapore 609927 Tel. (+65) 65677910 Fax (+65) 65679177 admin@iguzzini.sg ST. PETERSBURG iGuzzini Finland & Baltic Oy Ro in St.Petersburg Sofiskaya Street 14 RU-192236 St. Petersburg Tel. (+7) 812.326 6565 Fax (+7) 812.326 6562 russia@iguzzini.fi ROMA Via Panama, 52 00198 Roma Tel. (+39) 06.85354792 Fax (+39) 06.8411790 iguzziniroma@iguzzini.it ZÜRICH Uetlibergstrasse, 194 8045 Zürich Tel. (+41) 044.4654646 Fax (+41) 044.4654647 info@iguzzini.ch

Representative Offices CHINA iGuzzini illuminazione Beijing Suite I, 22nd Floor Oriental Kenzo 48, Dongzhi Men Wai, Dongcheng District Beijing, 100027, P.R.C. Tel. (+86) 10.84476770 Fax (+86) 10.84476771 iguzzini@iguzzini.com.cn

RUSSIAN FEDERATION iGuzzini Finland & Baltic Oy Ro in St.Petersburg Sofiskaya Street, 14 RU-192236 St. Petersburg Tel. (+7) 812.3266565 Fax (+7) 812.3266562 russia@iguzzini.fi

TURKEY

.iGuzzini .illuminazione SPA Türkiye Istanbul Irtibat Bürosu Veko Giz Plaza Meydan Sk. No:3 K.14 34396 Maslak Istanbul Tel. 0212.3558959 Fax 0212.3558951

UNITED ARAB EMIRATES iGuzzini Middle East Dubai Airport Free Zone Authority (Dafza) Bldg. 6EB, Office No. 835 PO Box 54827 Dubai United Arab Emirates Tel. (+971) 4.7017825 Fax (+971) 4.7017830 iguzzini.me@iguzzini.ae

On the cover: Chicago Art Institute - The Modern Wing, Chicago. The Modern Wing hosts the European modern art collection of the Chicago Art Institute. The use of glass and steel creates a transparent, bright and lightweight structure. External lighting highlights and reveals these features also at night. Architectural project: Renzo Piano Building Workshop Photo: Beppe Raso

UNI EN ISO 9001

UNI EN ISO 14001

External 2011- 2012 iGuzzini

This catalogue presents the range of external products 2011-2012. For further information on all the other iGuzzini fittings go to www.iguzzini.com • Lighting management systems

and light flow regulation device • Indirect lighting systems for urban areas • Direct lighting systems for urban areas • Lighting projector systems for urban areas • Wall systems for urban areas • Floodlights • Bollards for residential/public areas • Pendants • Ceiling-mounted fittings • Ceiling-recessed luminaires • Wall/ceiling-recessed luminaires • Ground/floor-recessed luminaires • Wall/ceiling-mounted fittings • Wall-mounted fittings • Wall-mounted luminaires

for luminous effects • In-ground spike fittings

Internal Lighting Systems This catalogue presents the whole iGuzzini range of internal fittings.

iGuzzini warrants that their products are free from any defect in manufacturing and/or material in case of proper use, for a period of five years from the date of the invoice prior to online registration at www.iguzzini.com and acceptance of specific conditions. In any case, iGuzzini recognises the warranty rights foreseen by the law.

Fittings that guarantee energy saving are marked with this symbol.

For the ENEC mark see the page code reference at the end of catalogue.

Lighting management systems and light flow regulation device

30 LMS Quick (DALI protocol)

38 Scene Equalizer

46 Master Pro update

54 Colour Quick

262 W-Saving

96 Delphi

96 Argo

96 Argo span-wire

Indirect lighting systems for urban areas

58 Nuvola

64 Mininuvola

68 Archilede

80 Lavinia

Direct lighting systems for urban areas

Cut-Off System

120 Delo

120 Argo

Cut-Off System

132 Salaria

144 iRoad

154 Flaminia A pole-top

154 Flaminia B

212 Platea

212 Platea 102

172 CityWoody

172 FrameWoody

154 Flaminia B

Lighting projector systems for urban areas

pendant

172 MultiWoody

240 MultiPro

64 MiniNuvola

80 Lavinia

96 Delphi

Wall systems for urban areas

Cut-Off System

144 iRoad

154 Flaminia

172 MultiWoody

240 MultiPro

RGB 2

212 Platea

96 Argo

120 Delo

120 Argo

172 CityWoody

172 FrameWoody

Cut-Off System

212 Platea 102

132 Salaria

External 2011-2012 iGuzzini

Floodlights

240 iPro

212 Platea

324 iTeka

274 Woody

274 Miniwoody

290 iWay

290 Pencil

320 Olimpia

266 Lingotto

172 MaxiWoody

304 iPoint

310 Tee

316 Dart

318 Path

324 iTeka

336 iFace

344 Ellipse

350 Arc

352 Bliz

354 Zyl

360 GlimCube

370 Euclide

354 Zyl

374 iSign

466 Linealuce

Bollards for residential/public areas

Pendants

Ceiling-mounted fittings

304 iPoint

502 Pixy

380 iRound

466 Linealuce

504 iRoll 65

466 Linealuce

Ceiling-recessed luminaires

RGB

Emergency

Wall washer 3

Wall/ceiling-recessed luminaires

486 Vis

494 Full square

494 Grid square

490 Full

496 Comfort

466 Linealuce

436 Ledplus

floor washers

436 Ledplus stainless steel frame

436 Ledplus

all glass

498 Walky Miniwalky

stainless steel frame

502 Pixy

410 Light Up Light

420 Light Up Walk inox

420 Light Up Garden

420 Light Up Balisage

436 Ledplus

466 Linealuce

stainless steel frame

Ground/floor-recessed luminaires

388 Light Up walk profess.

436 Ledplus all glass

388 Light Up walk profess.

436 Ledplus stainless steel frame

frame with screws

Wall/ceiling-mounted fittings

486 Vis

494 Full square

494 Grid square

490 Full

336 iFace

344 Ellipse

374 iSign E

Wall-mounted fittings

504 iRoll 65

240 iPro

324 iTeka

274 Woody

274 Miniwoody

304 iPoint

320 Olimpia

354 Zyl

310 Tee

360 Glim Cube

344 Ellipse

350 Art

528 Radius

496 Comfort

490 Screen

466 Linealuce

RGB 4

Wall washer

Drive-over

External 2011-2012 iGuzzini

Wall-mounted luminaires for luminous effects

530 Yota

532 Kriss

360 Glim Cube

534 Ledstrip Tube

240 iPro

324 iTeka

274 Woody

274 Miniwoody

360 Glim Cube

310 Tee

320 Olimpia

In-ground spike fittings

Lamps Code/page reference Alphabetic index System composition codes Colours

304 iPoint

354 Zyl

536 542 550 551 551

RGB 5

Coordinates iGuzzini

iTeka

Lingotto

WoodyMiniwoody

Linealuce

iFace

Ellipse

iPoint

Tee

Olimpia

Zyl

Glim Cube

Photo: Giuseppe Saluzzi

iGuzzini

Recanati (Mc) - Italy: iGuzzini business premises

Photo: Giuseppe Saluzzi

Guzzini Group - Fimag The Guzzini group is made up of three companies. In order of incorporation, they are : Fratelli Guzzini Spa, iGuzzini Illuminazione Spa, Teuco Guzzini Spa. All are headquartered in Recanati Italy. Although each Guzzini company operates independently from the others and in a different market sector, the Guzzini companies also share the following common things: - A natural propensity toward producing objects for both domestic environments as well as for common areas; - A strong predilection for quality and performance by choosing only the most modern and innovative materials;

Recanati (Mc) - Italy: iGuzzini business premises

- A predisposition and true vocation for innovation, both in design and in technology; - A deep conviction that Industrial Design plays a central role in each and every company. Fimag, which stands for Finanziaria Mariano Guzzini, was established in 1982 with these basic, underlying and unifying precepts. Although they each have their separate operations and companies, Mariano Guzzini's children and grandchildren are all reunited under the Fimag umbrella. iGuzzini - The History and Company Philosophy We have worked in and for “light” since 1958. This was the year when the Harvey Creazioni, a small company that produced lamps for the home, was founded. Today we are the leading Italian manufacturer in the “Lighting” market, and we rank among the top European manufacturers. We aren’t satisfied by simply making good lights. We want be the creators of good lighting: light that shines in a room, a house, a building, a museum, a cathedral, a company, a plaza, an airport, and, yes... even an entire city. Good lighting has to be created with the awareness that it has to integrate with its environment, taking care not to invade it, darken it, or violate it. Light must be respected, and light has to, in turn, respect the nature of people and things. The iGuzzini mission is therefore to study light, to know light and to make it known; improving the integration with architecture through industrial design. Because of this, a large part of what we do is to offer consultation on lighting techniques, both in the design phase and as an after-sales service. Famous architects and designers have consulted us since the very beginning iGuzzini's operations.

Light design is not just for spaces; good design is also an awareness of all aspects that are tied to the quality of space and the ambiance that is created by light, both indoors as well as outdoors. Because of this conviction, iGuzzini has worked with a large number of researchers, physicians, sociologists, and physicists who hail from the most important international research organizations: Harvard University, M.I.T Boston, Università “La Sapienza” in Rome, Politecnico of Milan, Fraunhofer Institute, Central Institute for Restoration, CNR. Awards and recognition iGuzzini products can be found in all kinds of different locations: airports, historical districts, museums, shops, archaeological areas, and multifunctional spaces. We have received some of the best European awards for industrial design, such as the Gold Compass, conferred to iGuzzini three times by the ADI, (“Associazione per il Disegno Industriale” / Industrial Design Association). In 1989 the Gold Compass was won for “Shuttle” designed by Bruno Gecchelin; in 1991 it was given to all the Guzzini companies, and in 1998 the Gold Compass was again won for “Nuvola” designed by R. Piano & Meccano. iGuzzini headquarters Mario Cucinella’s project for our industrial headquarters expresses the desire to unite natural elements that are tied to the environment that surrounds us with artificial man-made elements. It is therefore a work of architecture and nature, of technology, and of respect for the environment. Our environment is not only the landscaping that surrounds the buildings, but above all the interior where real people live and work. This shows the level of sophistication and care we have for design and those minute technical details that are dedicated to creating liveable and natural spaces made of air, natural light, and clean energy. With this project, we embarked upon on a search for architectural precision and an environmental and mental ecology. By doing this, we found a balance and both artificial and natural beauty. Some statistics: Total Area: 150.000 m2. Office space: 54.000 m2.

The designers

Ron Arad

Mario Cucinella

Jean Michel Wilmotte

Piero Castiglioni

Renzo Piano

GiĂ˛ Ponti - Ambrogio Pozzi

Norman Foster

Massimiliano and Doriana Fuksas

Gae Aulenti

iGuzzini has always counted on design as its main distinguishing element. Design, for iGuzzini, means planning, awareness, and collaboration. Therefore, we have enlisted the help of a large number of professional designers, who have contributed to our growth throughout the years. The iGuzzini Gallery gives an overview of that growth, and it can be viewed at the following ad Marco Albini, Franca Helg and Antonio Piva Emilio Ambasz Paul Andreu Ron Arad Gae Aulenti Rodolfo Bonetto Gabriele and Oscar Buratti Piero Castiglioni Arnold Chan Mario Cucinella Jean-Marie Duthilleul Norman Foster Massimiliano and Doriana Fuksas Bruno Gecchelin RenĂ¨ Kemna David Law Luigi Massoni Pamio Design Piano Design Gianfranco Paghera Antonio Piva Marco Piva Ambrogio Pozzi Gerhard Reichert Valerio Sacchetti Studio & Partners Kazuhide Takahama Maurizio Varratta Lella and Massimo Vignelli Jean Michel Wilmotte

Bruno Gecchelin

Paul Andreu

Lella and Massimo Vignelli

Our company has focused its marketing efforts on the concept that lighting quality is a fundamental need and contributes to the quality of its environment. We have communicated this new way of thinking about lighting through a series of marketing activities, the most important of which are our advertising campaigns.

1982 The Lighting Industry “Lighting part VII”. In 1982, our company embarked upon a campaign that intended to illustrate the advantages of lighting design as first

step toward environmental quality. We began to create a dossier with different volumes, each dedicated to a different and specific lighting issue.

2000 Better Light for Better Life 1998 marked the beginning of our quality of life and personal wellness research, as we began to turn our attention to light pollution in interior spaces as well as exteriors. We continued the biodynamic light research that we had already begun in

1988 in collaboration with the CNR and with the Lighting Research Centre in Troy. We were able to show, through the data from our experiments, how artificial lighting can affect all human beings' psychological and physiological equilibrium.

The advertising campaign was developed to be run in international magazine and newspapers in order raise awareness with the masses. Therefore, our ad campaign targets are a wide range and a large number of people, and not only the experts of our particular market.

1990 With iGuzzini, against light pollution. In 1990s we realized that despite our commitment to top quality lighting design, we still needed to raise awareness. Therefore, we chose to tackle an issue that was yet to have been addressed by anyone, an issue that derives from poor lighting design. That issue is Light Pollution.

2002-08 Partners for Better Light Lighting has become a key element as we strive to create or maintain well-being. In order to achieve this goal we enlisted the help of many associations. The slogan of our last international campaign is: “Partners for Better Light”.

What exactly is light pollution? Basically, it is the dispersion of artificial light upwards and/or toward any direction that does not need light. This successful campaign caught the attention of the public as well as legislators and administrators who decided to direct their attention to this important issue.

Marketing iGuzzini

www.iguzzini.com iGuzzini is constantly dedicated to develop and promote the culture of light . The primary focus and objectives of our activities are those of sharing the value of utilizing artificial light correctly and to promote top quality lighting projects. With this goal in mind, we restructured the www.iguzzini.com official website, creating areas in which it is possible to find information on products and projects that we have designed, on the company (its history, its philosophy), information about iGuzziniâ&#x20AC;&#x2122;s work with architects and designers, as well as the research associations we work with.

In the download area, users can view 2D and 3D drawings of the products; photometric curves; Photos, which is a lighting design programme developed by iGuzzini Illuminazione; general catalogues; product specific catalogues; and also the Incontroluce magazine. The UK (www.iguzzini.co.uk), Spanish (www.iguzzini.es), Swiss (www.iguzzini.ch), and German (www.iguzzini.de) subsidiaries have developed their own sites, in which the user can find the company philosophy and brand applied to the different European nations

Light Campus.iguzzini.com The Light Campus section of iguzzini.com, which can be freely accessed by anyone, is devoted to the light culture and lighting techniques, and it is open to all those people who want to delve into these thematic issues. It allows the user to independently manage their his or her own lessons and curriculum based upon his or her interests and requirements. In 2006, LightCampus underwent a restructuring process, breaking the issues into 4 areas, to which we added practical exercises (laboratory) on real projects that have already been developed.

catalog.iguzzini.com We have created this tool to answer the needs of architects and lighting designers and provide them with detailed, exact, cross-referenced information on products and performance. Lighting fittings can be simply searched with various modes and filters based on their performance, type and application channel.

Navigation by sections of the range

Moreover, we have upgraded the management and search of some information, such as the download of photometric data in the most popular formats. The simple, intuitive graphic layout supports and simplifies navigation. The on-line catalogue, which is constantly updated in every section (new products, photometric curves, new light sources, etc.), is the most precise and complete tool to get to know the wide range of iGuzzini products.

Advanced Search

Free search and search by code

Navigation by sections of the range

Navigation by product type

Navigation by application channel

Navigation by application channel Free search and search by code To go directly to the product code or make a free search Navigation by sections of the range To navigate through all ranges of iGuzzini products divided between interiors and exteriors Navigation by product type To select products according to type (wall-mounted, recessed, etc.) Navigation by application channel To browse lighting realizations, linking projects and products used. Advanced Search To simplify product search with a series of â&#x20AC;&#x153;filtersâ&#x20AC;?, such as: lamp category, insulation class, IP protection degree, control gear, etc.

Online catalogue iGuzzini

Product line selection

Product data sheet List and links of project/s made with selected product line

Search for project/s made with selected product

Search for product/s used for selected project

Project selection

Product data sheet It provides full information and download files for the selected product, with possibility of selecting different accessory/lamp combinations to display all photometric and non-photometric data that is essential for lighting design.

Product/s used for project

Image download

Product photo

The chart illustrates criteria to help you get the most out of the iGuzzini catalogue

Designer

Denomination of the fitting

Product settings

Family

Product pluses

Specifications

Information for the reader iGuzzini

Colours

Classification of luminaires and level of protection

Code photo

Application Photo

Drawing with relevant dimensions (The measurements are given in mm)

Product description

Trade code

Light source

Cone of light

Photometric data

Photo of accessory

Standards All the lighting fittings included in this catalogue were designed and manufactured in compliance with European Standards EN 60598-1, which comply with international Standards IEC 598-1. The products are ENEC- or IMQ- approved and bear the EC Mark. The EC Mark shows that the product complies with and meets the applicable EC Directives and entitles the product to be freely marketed in all the Member States of the European Community.

The Mark sets out the penalties and responsibilities resting with the producers and sellers that market EC-marked products not compliant with the requirements provided for in the relevant Directives. The lighting fittings are required to meet the following Directives: EC 89/336/EEC on “electromagnetic compatibility” and EC 72/23/EEC on “low-voltage electrical material”

Classification of fittings Classification of fittings according to the electrical protection. Class 0

Class I

Classification of fittings according to the inflammability of the surfaces used for installation.

with functional insulation, but without double reinforced insulation in every part and without earth connections. with functional insulation in every part and with earth terminal or clamp if the unit is fixed, or with electric power supply cable complete with earth wires and relative plug with earth contact if the unit is mobile.

Class II

with double insulation and/or reinforced insulation in every part and without earth connections.

Class III

designed for connecting to low voltage circuits, without any internal or external circuit functioning at a voltage different from safety low voltage.

The fitting can be installed on normally flammable surfaces. The fitting can be installed on normally flammable surfaces with thermally insulated ceilings. The fitting cannnot be installed on normally flammable surfaces. M

The fitting can be installed on furniture.

Information for the reader iGuzzini

Degree of protection The resistance offered by the fixture to the penetration of solids and liquids is indicated by the IP prefix (International Protection) followed by two numbers. The first number identifies the degree of protection against the ingress of solids and the second number against liquids (IEC 529 - EN 60529 publication). The letters IK indicate the the level of shock resistance of the luminaire, according to CEI EN 50102.

PFIRST IDENTIFICATION NUMBER Degree of protection against penetration of solids.

SECOND IDENTIFICATION NUMBER Degree of protection against penetration of liquids.

LEVEL OF SHOCK RESISTANCE It designates the level of shock resistance according to CEI EN 50102.

Not protected

IK00

Not protected

Protected against penetration of solids larger than 50 mm.

Protected against the vertical fall of water drops

IK01

Protected against 0,15 J shocks

Protected against penetration of solids larger than 12 mm.

Protected against the fall of water at a maximum angle of 15°

IK02

Protected against 0,2 J shocks

Protected against rain

IK03

Protected against penetration of solids larger than 2.5 mm.

Protected against 0,35 J shocks

Protected against splashes

IK04

Protected against 0,5 J shocks

Protected against the penetration of solids larger than 1 mm.

Protected against jets of water

IK05

Protected against waves

Protected against 0,7 J shocks

Protected against the effects of immersion

IK06

Protected against 1 J shocks

Protected against the effects of prolonged immersion

IK07

Protected against 2 J shocks

IK08

Protected against 5 J shocks

IK09

Protected against 10 J shocks

IK10

Protected against 20 J shocks

Protected against the penetration of dust.

Completely protected against penetration of dust.

…m

Approvals

UNI EN 29001 - ISO 9001

The Italian Quality Seal Institute has recently introduced a new seal (IMQ Performance) which certifies the performance of products tested in certified laboratories as regards:

• photometric curves • tables of luminous intensity • diagrams of luminances • glare curves • output.

The ENEC mark certifies the conformity of the products to all the applicable European standards and guarantees the company in terms of organization and production (ISO 9001).

The presence of this mark represents the best safety and quality warranty for the end user.

ISO 9001 The ISO 9001 certification confirms the objectives that iGuzzini has been always pursueing. The company’s objective has always been that of research, production and distribution.

A global commitment for total responsibility towards an ever changing world as well as towards the customer’s expectations which require continuos improvement.

The photometric data of the products within this catalogue refer to CIE recommendations 29, 52, and standards DIN 5040, BSI 4533, CIBSE TM5, CIBSE LG3, and UTE C71-121. For further information we recommend consulting these documents.

The photometric data included in this catalogue are organized according to product type. A Systems with street lighting optics for urban areas

B Systems with symmetrical optics for urban areas

C Systems with asymmetrical longitudinal optics for urban areas

D Systems with asymmetrical transversal optics for urban areas

E Spotlights with symmetrical optics

F Spotlights with asymmetrical longitudinal optics

G Spotlights with asymmetrical transversal optics

H Wall-mounted / celieing mounted luminaires with symmetrical optics I

Wall mounted luminaire with asymmetrical optics

Polar Diagram

Light Cone

Classification for urban areas

•

However, we are at your disposal for any further explanations or documentation that we have on hand in our laboratories, should it not have been covered either in this catalogue or on our website ww.iguzzini.com.

Classification for street lighting systems

Lighting

•

Isolux

Effects

•

L Wall washer

•

M Walkways

•

N Effects

• Further photometric data are available on the www.iguzzini.com website.

Photometric data iGuzzini

lighting distribution

General light

Very Wide Flood

Wide Flood

Flood

Medium

Spot

Asymmetrical

Wall Washer

Down Light Wall Washer

Up Light Wall Washer

Adjustable

Elliptical

Light Sliver

Light Sliver Asymmetrical

Road

AL ALo

Asymmetrical Longitudinal

Asymmetrical Long. LED

Asymmetrical Transversal

Spot Spot

Medium Medium

Flood Flood

Spot Medium

Medium Spot

Flood Medium

Medium Flood

Asym. Longit. Asym. Longit.

Flood Elliptical

EllipticalFlood

EllipticalElliptical

Light SliverLight Sliver

Spot Light Sliver

Light SliverSpot

Medium Elliptical

EllipticalMedium

Light SliverAsym. Longit.

Spot Long. Asym.

Medium Long. Asym.

Asym. Longit.Spot effect

AL Variable

Polar diagram Represents the distribution of luminous intensities on the longitudinal C0°-180° (continuous line) and transversal C90°-270° (dotted line) planes with respect to the street as well as the surface onto which the fitting emits the most light intensity. C Imax (thin dotted line). The opening cone that is indicated on the 2 sections refers to Imax/2

C 90°-270° C 0°-180°

C Imax

Light cone Emax lux Em lux

2m α=

Indicates average and maximum illumination values of light emission measured on the horizontal sections located at different distances from the fixture. Should the section be circular, d is its diameter. Should the section be elliptical, d1 and d2 are its relevant axes. For light sources equipped with reflectors, Imax, Em, and Emax are absolute values and do not refer to 1000 lumen. While for all other light sources, the values refer to 1000 lumen. The values d1 and d2 are calculated with respect to Emax/2

CIE classification of fittings Installation heights

LeA

L <= 4,5 m

< 4000

L 4,5 ÷ 6 m

< 5500

L >= 6 m

< 7000

N. B.: the values of LxA shown in the catalogue have been calculated based upon the greatest power that each fitting can handle. 0,5

Systems with symmetrical and asymmetrical optics for urban areas. CIE n°136 (Guide to the Lighting of Urban Areas) recommends choosing a light fitting with a coefficient of LxA0,5 which represents the degree of glare tolerability in various areas of an urban context. “L” represents the luminance value of the fitting observed from a vertical plane which is parallel to the axis of the road in a direction inclined 85°÷90° from the vertical. “A” is the apparent area covered by the light as observed from a 90° angle in relation to the vertical. The table on the left provides the most appropriate lighting parameters, where “h” is the height of the light source. 19

Photometric data iGuzzini

CIE classification of fittings Street lighting systems for urban areas

Narrow Medium Large Spread transversal extension 90% I max 1,71 2,7h 60°

45° 55°

70°

Spread Classification of each fixture according to the transversal extension of the lighting in the direction of the road.

rt ho

Throw (longitudinal extension)

< 60 short

60° ÷ 70° intermediate

> 70° long

Spread (transversal extension)

< 45 narrow

45° ÷ 55° medium

> 55° large

SLI (screening)

SLI < 2 weak

SLI da 2 ÷ 4 moderate

SLI > 4 strong

CIE N° 34 This recommendation classifies street-lighting types of fixtures on the basis of the characteristics of their light emissions with three parameters: Spread, Throw, and SLI.

1,7h

Throw Classification of each fixture according to the longitudinal extension of the lighting in the direction of the road.

ia ed

erm

Int

2,7h

ina

git lon n ax) I( m ensio w ext hro

SLI Parameter that defines the degree of glare control of the street light. Fixtures with a higher SLI have a greater glare control. EN 13201-2 G: class of lighting intensity D: class of glare index

DIN classification of fittings DIN N° 5044 This regulation classifies street light fittings into two categories (KB1 and KB2) on based upon the degree to which they limit glare.

KB glare limitation classification

for γ equal to 90°

10 cd / 1000 Im max 500 cd

2 50 cd / 1000 lm max 1000 cd

for γ equal to 80°

30 cd / 1000 Im max 1000 cd

100 cd / 1000 lm max 1000 cd

Luminosity

BSI classification of fittings Plan of the main polar curve in a vertical direction Type of luminous spread

(1)

Angle of opening relative to the radius

Limit of the luminous intensity in the opening cone 30° from vertical Limit of peak for fixture intensity cd/Klm

BSI N° 4533 UK regulation BS4533 classifies street lights into two categories: CO (Cut-Off), and SCO (Semi Cut-Off), based upon the type of luminous spread produced. Light fixtures are classified as CO and SCO if their light emission has the characteristics specified in the table on the left, which specifies the glare limitation values

Vertical plane parallel to the road’s axis Opening at which Intensity at intensity of elevation of 300 cd/Klm 90° cd/Klm corresponds.

min

max

min

max

min

max

Cut-off

65°

200

500

250 (1)

72°

78°

Semi cut-off

75°

180

500

250 (1)

78°

84°

The maximum value must not exceed 80% of the peak intensity

isolux Lux h=4 m. α=0°

Lux h=7 m. α=0°

41 35 29 24 19 15 11

4 TC-T GX24d-3 26W

HST-DE Rx7s 150W

-2

18 m

51 35

21 15 10

h1 -5

-4

-3

-2

-1

P d* d

Indicates the curves that connect the points on the street plane that have the same value of the horizontal lighting. To obtain EP lighting in one point, produced by a fixture that is installed at a height that is different from the given height, follow these instructions: On the isolux diagram, detract the E*lighting value from the d* distance = (d/h1) xtaken in the same direction of point P. The EP value is therefore obtained by the ratio: EP = E* x (h/h1)2.The indicated values are absolute and do not refer to 1000 lm.

Light pollution iGuzzini

A link with the sky has always been atavistic for mankind. Placing a barrier to this relationship provokes imbalances in the natural balance of things, not just for mankind, but also for plants and animals. In the congress held in Paris in June 1992, UNESCO highlighted the enormous damage wreaked upon astronomy by excessive artificial lighting and declared that starry nights were a part of the worldâ&#x20AC;&#x2122;s heritage that should be safeguarded. The culprit of all this is light pollution which also results in the waste of 30% of the energy used (data provided by Dark Sky Association) to light up cities.

To resolve the problem, there is no need to plunge cities into the dark, but simply to adopt rules governing lighting which make use of fixtures which, through the use of concentrating and asymmetric optics, light-refracting screens and fresnel lenses, are able to provide effective lighting without increasing the already high level of light pollution. It is not enough just to use these devices; any installation or maintenance must be undertaken properly to ensure light pollution is kept to a minimum.

Fittings which ensure a tight control of light pollution are highlighted with this symbol.

With iGuzzini against light pollution

Research iGuzzini has always been sensitive to needs and requirements of the market; the Company utilizes its technical and cultural lighting know-how to offer highly innovative instruments that are able to knowingly combine LED technology, design, and the top quality that has always accompanied iGuzzini products. Today’s modern life has ever more risks tied to pollution and the need to moderate the use of traditional energy sources. We need to be more and more vigilant when it comes to the environment.

Energy Saving

DALI RGB dynamic colour control

Excellent operation also at low temperatures

High chromatic saturation

Clean light, because LEDs have no IR or UV components

Wide range of colour temperatures: • Neutral white (4200K) • Warm white (3100K) • Cool white (6700K)

Reduced maintenance and long lamp life

Low temperature

Use of LEDs allow for very small light fittings

ERG Y

N S

Performance An LED (“Light Emitting Diode”) has low energy consumption and high potential yield. Produced and built without interior filaments (which are more fragile and subject to rupture), or mobile parts, LEDs ensure a longer life and more dependability compared to other lamps. Via special devices (chips) it is possible to insert and manage a large number of LEDs in one fitting at the same time (even different coloured LEDs). This guarantees maximum customization and management of light and colour to create beautiful light scenery.

alternative to traditional lamps (incandescent, fluorescent, and halogen) when lighting interiors and exterior public, industrial and private areas. It is estimated that the luminous efficiency of LED's will double in 5 years and almost triple in 13 years, consequently increasing the energy saving.

Technology LED technology single-handedly takes on this role. At first used for signalling and indicator lighting, it has radically changed, becoming today’s “light of the future”. LEDs have innovative and advanced technical features, as well as a very small size, which allow the products to be inserted into any light fitting. LEDs are therefore the most effective

Lighting, therefore, has to contribute to energy savings and provide a solution to the rising costs of electricity, all the while yielding the same lighting efficiency as always.

V I N

LED luminaires iGuzzini

The development process of LED products is complex and delicate. It takes attentive quality controls to produce a fitting that complies with requirements. Therefore iGuzzini has controls at each step of the production process in order to produce fittings with top quality and top performance. • Selects the best LEDs on the market • Designs optics in thermoplastic material • Utilizes advanced technology for printed circuit boards • Designs dissipators, adapting them to the different needs of industrial designers • Designs drivers to control the technical specifications of chip producers • Uses the most suitable communication buses for how the product will be used (DALI, DMX, LON, ecc…) • Develops innovative software that is able to make control panels and LED management simple • Offers highly functional accessories that create eclectic light direction, all the while respecting safety and visual comfort

Heat dissipator

Optics

LED Printed circuit board Dissipation

In order to guarantee the LED fittings' top efficiency and maximum quality, iGuzzini uses a careful binning process for each solution, an accurate control system, and a qualitative selection of LEDs that will be used based upon the colour temperature of each. A colour range for each LED is determined so that the colour temperature will remain constant.

0.47

2670K

Warm White 0.45

3500K

Neutral White

Cool White 0.37

W N XM W N O X W XO WP Q W XP

0.35 0.33 10000K

0.31

0.29

RN RO

SO SP

MO blackbody locus

TM 0.39

QM RM

4500K

0.41

0.43

0.9 520

0.8

0.4 10000

0.3

580 2500 40003000 6000 2000 1500

600 620

490

700

0.2 0.1

0.25

0.0

0.29

‘A’

0.5

0.27

Blackbody Radiation Curve

560

0.6

0.25

540

0.7

0.31

0.33

0.35

0.37

0.39

0.41

0.43

0.45

0.47

0.49

Graphic representation of the BIN structure refers to the White LED Typical colour temperatures of white LED's: Cool White 6700K, Neutral White 4200K and Warm white 3100K

480 470 460 380

0.0

0.1

0.2

0.3

0.4

0.5

0.6

0.7

0.8

CIE 1931 chromatic diagram

Monochromatic LED State-of-the-art technology is combined with three different colour temperatures to guarantee flexible lighting direction with warm (warm), natural (neutral) and cold (cool) light on request to enhance spaces, buildings and structural details and meet the different needs of the most diverse settings.

Neutral white (4200K)

Warm white (3100K)

LED RGB The RGB LED technology gives life to suggestive luminous settings. Chromatic LED's generate emotions and exalt details of squares, monuments, parts and buildings. Lighting direction is customised with fascinating plays of light and colours to fill spaces with magic atmospheres.

LED optics Moreover, LED's are equipped with a wide range of optics to ensure maximum flexibility and meet the lighting requirements of the settings where the products are used. Flood, spot, longitudinal- transversal blade of light optics and two specific optics for the RGB system - ET and EL - create suggestive chromatic scenes. Surfaces and details are enhanced by light with total visual comfort.

Spot Optic (S)

Flood Optic (F)

Transversal Light Sliver Optic (LT)

Longitudinal Light Sliver Optic (LL)

Longitudinal elliptical optic (EL)

Transversal elliptical optic (ET)

Cool white (6700K) on request

LED luminaires iGuzzini

Saving Energy is an issue that requires attention and dedication. As a testament to our devotion to energy savings, "-CO2 ReLighting" was born. This project's objective is light quality by using less energy, and therefore less CO2 emissions. To do this, iGuzzini has made fittings and lighting systems that use technology to contain the amount of energy that is used and therefore to reduce pollution: High efficiency lamps, high yield optics and electronic components that can connect networks with control systems in order to manage fittings. We can thus reduce energy requirements by using electricity in adequate quantities and only when it is truly needed.

-CO2 ReLighting the road to reduced emissions

Comparison between Light Up Light code BB41 (LED) and 50W traditional ground recessed luminaire with PAR 20 lamp Watt/hour (W/h)

Emitted flow (lm)

Lamp life (h)

Maintenance cycles

Light Up code BB41

624

50000

13 years

PAR 20

500

2000

6 months

Products

All these products use last-generation LED's and optics, giving a significant contribution to energy saving while ensuring high levels of luminous efficiency.

66%

50Kg

Values with symbols refer to the use of one product for one year, with 10-hour daily operation. The number in the “CO2 Absorption” symbol corresponds to the number of trees that would be necessary to absorb the amount of saved CO2 if it was introduced in the atmosphere.

Comparison between MaxiWoody code BB31 with MaxiWoody QT-32 E27 halogen lamp. Watt/hour (W/h)

Emitted flow (lm)

Lamp life (h)

Maintenance cycles

MaxiWoody code BB31 3100K

2330

50.000

1 every 13 years

MaxiWoody halogen QT-32 (E27) 3000K

150

2400

3.000

1 every 0,8 years

Products

Lighting management systems design iGuzzini

iGuzzini

New York: Lighting Reaserch Center del Renssaeler Polytechnic Institute di Troy

Light has always had a fundamental role. And it's on light that iGuzzini has founded its corporate identity and developed its research. Either natural or artificial, light is part of our life and affects our biological rhythms and daily activities. Over the years iGuzzini has carried out an intense research programme that has led to the development of lighting management systems to take full advantage of correct lighting.

Back in 1988 the investigation started with Sivra;, in collaboration with Spazio S.a.S of Milan, the National Research Institute, the Lighting Research Center of the Rensselaer Polytechnic Institute of Troy and Futuro of Florence. The project demonstrated the importance of correct lighting management in work activities. Originally developed as a solution to problems encountered in enclosed settings, Sivra (Variable Lighting System with Automatic Regulation) showed that the use of light can

stimulate the human body, improve concentration and productivity skills. Sivra is the first concrete result of the investigation, which has continued uninterrupted since then.

Sivra laboratory Dynamic light automatically changes light levels and colour temperature.

Circadian clock 11

7 4

8 3

9 2

10 1

Natural light, in its daily rhythm, can be considered lifeâ&#x20AC;&#x2122;s very clock, producing scientifically measured psychological and biological effects on human beings. The iGuzzini biodynamic lighting systems reproduce, in areas where they are installed, Bright Light and dynamic light. Bright Light is light that is, by virtue of very intense lighting (over 2500 lux), able to augment the production of hormones in our bodies during the hours we are awake. The desire to sleep will diminish, making us more active and receptive to external stimuli, positively influencing our mental states and improving our mood without producing stress.

Dynamic light, changes lighting levels and colour temperatures. It increases the stimulating capability of the space and it keeps our minds active. This is an important issue if you consider that today the majority of work spaces are not the slightest stimulating. Dynamic light also creates a temporary dimension just like sunlight, giving us a chronological measurement of time.

Lighting management systems iGuzzini

Bergamo - Italy: Red Km, Brembo

design iGuzzini

Lighting management systems

Control functions

Today, lighting schemes are more complex than in the past. Supported by exhaustive know-how, vast experience and high awareness of social issues, iGuzzini replies to the user's diversified requests and energy saving and environmental requirements with a wide offer of lighting management systems. Chosen according to the specific functions and application areas, they represent the perfect solution for multiple settings and situations.

Through specific light control functions (presence sensors, daylight sensors and timers) used individually or in combination, light management systems guarantee: • Maximum energy saving and lower CO2 emissions. • Cost reduction • Maximum comfort for customers • Wide flexibility for each type of project • Possibility to create personalised light scenes

Presence detector

Dimming

Daylight sensor

Time programming

Open Systems iGuzzini

LONWORKS® PROTOCOL

LMS Quick

Each space has its own configuration, specific purposes and exact lighting requirements. I Open light management systems with LON and DALI protocol operate with great flexibility and versatility to meet the diverse needs of specific settings.

They can be programmed and configured for perfect integration in all spaces. Connected to each individual interface, they allow for managing every lighting fixture in the installation, as long as DALI.

Monospace

page 30

PROTOCOL

The selection of the light management system will depend on the type, size and complexity of the space.

• Management of 64+64 DALI addresses • 10 ready-to-use preset solutions. • Programming from PC for higher customisation. • Possibility to save 7 groups or 7 scenes.

• Adjustment of luminous intensity according to daylight. • Infrared remote control (available as accessory). • Lux, motion and IR multisensor (available as accessory). • RGB Management.

System used for managing luminous groups and white or coloured light scenes in single spaces with the simplicity of Plug and Play connectivity.

Scene Equalizer page 38 PROTOCOL

System used to manage static or dynamic light scenes in max. 32 settings.

Multispace • Management of 64+64 DALI addresses (over 2 lines). • Management of max. 32 zones with 16 static scenes assigned to each zone. • Programming and activation of timed sequences. • PC interface for management and programming of the lighting installation through a synoptic panel.

• Individual or group control for dimming, switch on and off functions. • Adjustment of luminous intensity of artificial light according to daylight. • Infrared remote control (available as accessory). • RGB management and variation of white colour temperature.

Master Pro update page 46 PROTOCOL

LONWORKS®

Modular system for automatic integrated lighting management in buildings.

Light Building Management • Lonwork-DALI protocols, management of max. 32,000 nodes. • Remote management of lighting installation over Internet TCP-IP (Transmission Control Protocol Internet Protocol).

• Automated management of shutters and electric motors. • Storage of “lamp hours” for programmed maintenance • RGB management and variation of white colour temperature.

Preconfigured Systems iGuzzini

Preconfigured lighting management systems are designed to provide a simple management mode for lighting installations that use a selection of iGuzzini fittings.

The Plug and Play technology immediately allows for automatic use, without need for configuration or assistance by specialised personnel.

Biodynamic Quick 11

Monospace

7 4

8 3

9 2

10 1

The intuitive display guarantees user-friendly use. These systems give life to versatile plays of light and colour to create suggestive scenarios.

• Plug and Play (64 DALI loads). • Lux and colour temperature control in manual or automatic mode. • Preloaded cycles ready to be played.

• Natural function: dimming according to Kruithof's curve. • IR remote control. (available as accessory).

Management system of biodynamic light for fixtures installed in single environments. The system is presented in the "Internal Lighting Systems" Catalogue

Light Equalizer

Multispace 11

7 4

8 3

9 2

10 1

• Plug and Play (80+80 DALI loads). (over 2 lines). • Smart card with customised cycles available on demand. • Automatic or manual adjustment of lux and colour temperature values. • Expandable system.

• Predefined light cycle according to season (summer, winter). • Automatic switch on and off with HD sensors. • Internal calendar. • IR remote control. (available as accessory).

Management system of biodynamic light for fixtures installed in multi-setting configurations. The system is presented in the "Internal Lighting Systems" Catalogue

Colour Quick page 54

Monospace • Plug and Play (64 DALI loads). • Colour control in manual or automatic mode. • Preloaded cycles ready to be played.

• IR remote control. (available as accessory).

Coloured light control systems for LED and fluorescent fittings.

LMS Quick design Maurizio Varratta

LIGHTING MANAGEMENT SYSTEMS - OPEN iGuzzini

LMS Quick DALI joins the wide range of iGuzzini light management systems to give a simple intuitive answer to the lighting requirements of single-area spaces where the correct light must be provided in the correct amount and at the correct time. It is an open management system that uses the DALI communication protocol to create customised flexible lighting directions while ensuring maximum energy saving.

Lighting converts the space in a cosy setting where light and colour come to life and arouse emotions in a dynamic sequence of perceptive variations. The control panel allows to select and play different light and colour scenes according to the desired effects and atmospheres.

iGuzzini infrared control (compatible with universal infrared control)

iGuzzini keypad compatible with Eurostandard and Schuko junction boxes

Shanghai - China: Expo Shanghai 2010

Photo: Hzcad Shanghai

Monospace

PROTOCOL

DALI light management 64 addresses

RGB management

Plug and Play

Split and Play Ten preset scenes

Customized cover

Standard push-button panel

LMS Quick design Maurizio Varratta

LIGHTING MANAGEMENT SYSTEMS - OPEN iGuzzini

This intuitive light management system has been developed to give immediate answer to the different lighting requirements of single spaces where the correct amount of correct light must be guaranteed at the correct time. Thanks to the Split and Play technology LMS Quick allows you to choose among 10 different presets, each of them programmed with predefined scenes for specific

spaces (office areas, meeting rooms, retail spaces, spas, churches, etc.) to create the appropriate atmosphere with dedicated lighting effects. The user simply needs to choose the type of space and carry out the installation with the assistance of qualified personnel to create the preset lighting scenes.

Custom A default preset to meet the simplest lighting needs. Perfect for any type of space.

For full information on the preset scenes included in the system, refer to the "Internal lighting systems" catalogue.

Preset 0 No. of light scenes: 3 No. of groups: 4

LMS Quick

LIGHTING MANAGEMENT SYSTEMS - OPEN

design Maurizio Varratta

iGuzzini

Block diagram of system

Used to control all luminaires with + and - keys. Used to switch on/off and control groups of light sources A, B, C and D separately and play max. 3 lighting scenes. Used to switch on/off luminaires in entire space with On/Off key. In case of at least one multisensor, lighting scene 3 will set the automatic control mode of artificial light according to daylight (energy saving). Equipped with IR receiver/transmitter to communicate with PC or infrared control. It can be reconfigured with PC and it can play max. 7 groups or 7 scenes (+, – and On/Off keys are fixed).

Remote units

Main unit

DALI components

INT. USB-IR + SW

LMS Quick

Dimmer DALI 230V

code 9721 00

code 9718 01-15

code 9636 00 300W code G741 00 1000W

Electronic power supply designed to mount on a DIN standard profile 220÷240V 24Vdc

code 9723 00

Luminaires

E.T.

Split and Play

12V

230V

Fittings* DALI FL also RGBW Fittings * LED DALI also RGB * Managed from PC

12V

code 9908 00

DALI Transformer DALI Bus

LMS Quick 64 DALI addresses

code 9634 00 35/105W code 9635 00 50/150W

12V

max 2

230V

Relè DALI code 9637 00 1x max 64 code G681 00 2x max 32

Auxiliary keypad code 9719 01-15

Woody Light Up w.p. Light Up light (1 load/3 addresses DALI) Linealuce

max 64

Electronic power supply 48÷56Vdc designed to mount on a DIN standard profile code BZ14 00 100W code BZ15 00 240W code BZ16 00 480W

max 2

Express Push-button interface

max 64

code 9722 00 Driver Group (1 load/3 addresses DALI) code SP07 00

Glim Cube max 64 Recessed multisensor

Driver Group (1 load/3 addresses DALI)

code 9711 - 9745 - 9746 - 9747 - 9748 - 9749

code 9856 00

max 4 + 2 HD

Ledplus X26

max 64

Lamp management Halogen L.V.

Surface-mounted multisensor Electronic power supply designed to mount on a DIN standard profile code 9908 00 10W code 9909 00 24W code 9910 00 72W code 9911 00 96W code 9912 00 240W

Colour LED Interface (1 load/3 addresses DALI)

code 9708 - 9750 - 9751 - 9752 - 9753 - 9754

12V

code 9639 00

Halogen

Universal infrared control

230V

Incandescent

Fluorescent

PROTOCOL Metal halides

Infrared remote control

DALI Booster 64

code 9720 01

Up to 64 DALI components

code G745 00

LED

12V

DALI converter -> 1-10V ABCD

code G765 00

LMS Quick design Maurizio Varratta

LIGHTING MANAGEMENT SYSTEMS - OPEN iGuzzini

code

functions

Quick DALI (keypad whit 10 keys + built-in controller) 9718 10-key panel to control all groups and scenes configured in the system. 1 on/off key, 2 dim keys, 4 group keys and 3 scene keys.

- Max. 7 groups/scenes - Max. 64 DALI loads - Max. 10 peripheral units (button interface, multisensor, auxiliary key panel) - Plug and Program solution with Split and Play device - Reconfiguration of scene and group keys from PC - Manages all light sources (halogen, fluorescent, incandescence, LED, discharge) - Used to control RGB lamps - Can be customized with printed covers - Rx/Tx IR on board

Installation on standard 503 recessed box (not included).

Device for Plug and Program installation of LMS QUICK system with max. 4 groups. Provided with 4 outputs, one for each lamp group. Installation is started with a combination of keys.

Split and Play device 9723 L 45 x 45 x 16 h Available in colour 00

115

115x80

- Software for installation and configuration of lighting installation made with LMS QUICK - PC interface with IR technology and USB cable for connection with system through PC

USB-IR Interface + software 9721 Available in colour 00

accessories and components

code

115

code

10-key panel to load max. 7 groups/scenes, general dimming, and on/off. Installation on standard 503 recessed box (not included). - Can load the same functions saved in the LMS QUICK master panel during configuration - Can be customized with printed covers

Available in colours 01-15

Auxiliary keypad with 10 keys 9719 85

Push-button interface with 8 buttons 9722 The interface inputs have the same fixed functions that replicate the functions of the master panel: - One ON/OFF button - Four keys to load the lamp group - Three keys to call the light scene

Available in colour 00

LMS Quick design Maurizio Varratta

LIGHTING MANAGEMENT SYSTEMS - OPEN iGuzzini

accessories and components code

power

Recessed IR + Lux + HD multisensor 9711 Recessed IR + Lux multisensor 9745 Recessed Lux + HD multisensor 9746 Recessed Daylight sensor 9747 Recessed Human Detector 9748 Recessed IR sensor 9749

power

Surface-mounted IR + Lux + HD multisensor 9708 Surface-mounted IR + Lux multisensor 9750 Surface-mounted Lux + HD multisensor 9751 Surface-mounted Daylight sensor 9752 Surface-mounted Human Detector 9753 Surface-mounted IR sensor 9754

Available in colour 01

IR receiver 9720

DALI TR Dimmer 9636 300W

120

code

- Power: 40-300 W (resistive load), 240 VA (inductive load) - Input voltage: 230-240 -10%, +6% Vac - Nominal frequency: 50/60 Hz - DALI load: 2 mA - DALI address 1 - Dimming range: 1-100% - Room temperature: 0 to +40° C - Protection against overheating and short-circuit - Output wires maximum length: 50 metres - Built-in installation in devices or BIN track - Number of DIN modules: 3 - Occupies 1 DALI address

Available in colour 01 55

104

DALI Dimmer for mains voltage lamps G741 100/1000W

Available in colour 00

Power: 100-1000 W resistive load Input voltage 230-240 -10%, +6% Vac Nominal frequency: 50/60 Hz DALI load: 2mA DALI address 1 Dimming range 1-100% Room temperature: 0 to +40° C Protection against overheating and short-circuit Output wires maximum length: 50 metres Installation on DIN track Number of DIN modules: 6 Occupies 1 DALI address

Power: 35-105 W Input voltage: 230-240 -10%, +6% Vac Nominal frequency: 50/60 Hz Output voltage: 11.6 Vac DALI load: 2 mA DALI address 1 Dimming range 1-100% Soft-start lighting up Room temperature: -10/+50° C Protection against overheating and overcharge with automatic regulation - Protection against short-circuit with automatic reset - Class II - Occupies 1 DALI address

178

Available in colour 00 41

Available in colour 00 DALI 12 V transformer for 50-150 W dimming 9635

200

DLC RM -1X DALI 1X dynamic relays 9637 4A -

Maximum current load: 4 mA Input tension: 230-240 -10%, +6% Vac Network frequency: 50/60 Hz Output voltage: 230-240Vac DALI load: 2 mA DALI address 1 Maximum load according to E-60947 -1000 W for resistive load (AC1) -300 VA for inductive load (AC15) -185 W for monophasic engines - Room temperature 0 to +40° C - Class II - Free installation

Power: 50-150VA Input voltage: 230-240 Vac Nominal frequency: 50/60Hz Output voltage: 11.8 Vac DALI load: 2mA DALI address 1 Dimming range 1-100% Room temperature: -25/+50°C Protection against overheating and overcharge with automatic regulation - Occupies 1 DALI address

178

DALI 12 V transformer for 35-105 W dimming 9634

Available in colour 00

DALI 2X Electronic Relays G681 10A -

Maximum current: 2x10A Input voltage: 230-240 -10%, +6% Vac Nominal frequency: 50/60 Hz Output voltage: 2 dry contacts DALI load: 2 mA DALI address 2 Maximum charge according to EN-60947 - 2500 W for resistive load (AC1) - 600 VA for inductive load (AC15) - 440 W monophasic engines Room temperature: 0 to +40° C Class II Installation on DIN track Number of DIN modules: 4 Occupies 2 DALI addresses

Available in colour 00 34

Available in colour 00

103

Electronic power supply designed to mount on a DIN standard profile (Dim 73x75x103mm) BZ14 100 W VIN=100-120/220-240Vac / 50-60 Hz VOUT= 48÷56Vdc (SELV) Available in colour 00

LMS Quick

LIGHTING MANAGEMENT SYSTEMS - OPEN

design Maurizio Varratta

iGuzzini

accessories and components

power

code

VIN=100-240Vac±15%/ 50-60 Hz VOUT= 48÷56Vdc (SELV)

117

power

DALI Booster 64. Electronic device for the expansion of DALI systems (up to 64 addresses) G745

124

code

Electronic power supply designed to mount on a DIN standard profile (Dim 60x124x117mm) BZ15 240 W 70

Input voltage: 220/240 -10%, +6% Vac Network frequency: 50/60 Hz DALI load: 2 mA DALI address 1 Internal DALI supplier for 64 DALI addresses (maximum power: 128 mA) - Class IP20 - Number of DIN modules: 4

Available in colour 00

Electronic power supply designed to mount on a DIN standard profile (Dim 82x124x127mm) BZ16 480 W VIN=100-240Vac±15%/ 50-60 Hz VOUT= 48÷56Vdc (SELV)

127

DALI -> 1-10 V converter G765

124

Available in colour 00

- Maximum load: 10 A (for resistive load), 5 A (for inductive load) - Input voltage: 230 +/- 10% Vac - Nominal frequency: 50/60 Hz - Output signal: 1-10 V - Maximum number of connectable lamps: 1x18W max 30 2x18W max 20 1x36W max 30 2x36W max 20 1x58W max 20 2x58W max 10 - DALI load: 2 mA - DALI address 1 - Dimming range: 1-100% - Output wire maximum length: 100 metres - Class II - Installation on DIN track - Number of DIN modules: 4

Available in colour 00

- Includes DALI 500/600mA interface and 30 W 28Vdc electronic ballast. - Can connect up to 9 LED RGB - Occupies 3 DALI addresses

Electronic power supply designed to mount on a DIN standard profile 9908 10 W

Driver group for Express RGB SP07 220-240Vac 17,5

Input voltage: 90-260 Vac Output voltage: 24+/-3%Vdc Frequency: 48/63 Hz Nominal power: 10 W Yield: 80% Number of DIN modules: 1

Available in colour 00 93

Available in colour 00

87,5

Electronic power supply designed to mount on a DIN standard profile 9909 24 W -

66,5

Input voltage: 90-260Vac Output voltage: 24+/-3%Vdc Frequency: 48/63 Hz Nominal power: 24W Yield: 85% Number of DIN modules: 5

Available in colour 00 Driver group for Glim Cube RGB

220-240Vac

9856

105

Electronic power supply designed to mount on a DIN standard profile 9910 72 W -

66,5

- Includes DALI 350mA interface and 30 W 28Vdc electronic ballast. - Can connect up to 6 LED RGB - Occupies 3 DALI addresses

Input voltage: 230Vac+/-15% Output voltage: 24Vdc+/-3% Frequency: 48/63Hz Nominal power: 72W Yield: 85% Number of DIN modules: 4

Available in colour 00 93

Available in colour 00

140

66,5

Electronic power supply designed to mount on a DIN standard profile 9911 96 W -

Input voltage: 230Vac+/-15% Output voltage: 24Vdc+/-3% Frequency: 48/63 Hz Yield: 85% Number of DIN modules: 4

110

Available in colour 00

120

Colour LED Interface 9639 - Number of DIN modules: 7 - Controls LED devices - Supplied by the same power supplies used for Ledplus products - Power consumption: 3 W - Each Colour LED interface needs its own supplier - The number of devices controlled by each supplier is indicated in the instruction sheet - Occupies 3 DALI addresses

Minimum configurations for system operation are: solution 1 - 9718 + 9908 + 9723 solution 2 - 9718 + 9908 + 9721

Available in colour 00

DALI Touch Easy design iGuzzini

LIGHTING MANAGEMENT SYSTEMS - OPEN iGuzzini

Block diagram of system DALI Touch Easy The system was developed to provide simple control of light in small spaces. The standard buttons are used to adjust the luminous intensity and switch on/off the light sources. The lux sensor automatically keeps luminous intensity at the setpoint value for high energy saving. Moreover, the motion sensor automatically switches off the lighting installation when not used. The DALI protocol can manage max. 64 interfaces to control any type of light sources.

Remote units

Main unit

Components

Light sources

DALI Touch Easy code G746 00

E.T.

12V

230V

Dimmer DALI 230V code 9636 00 300W code G741 00 1000W

12V

DALI Transformer code 9634 00 35/105W code 9635 00 50/150W

Motion detector code 9843 01

DALI BUS

12V

230V

Relay DALI code 9637 00 1x code G681 00 2x

PROTOCOL DALI Booster 64

Up to 64 DALI components

code G745 00

12V

DALI converter -> 1-10V code G765 00

Lamp management Halogen L.V. 12V

Up to 64 DALI components Halogen

230V

Incandescent

Fluorescent

Metal halides

Architectural Lighting

Photo: Ron Tan

iGuzzini

Perth - Western Australia Wesley Church Lighting project: Wood & Grieve Engineers

Scene Equalizer design Maurizio Varratta

LIGHTING MANAGEMENT SYSTEMS - OPEN iGuzzini

Multispace

Paris - France: Citè Internazionale Universitarie

Photo: Didier Boy de La Tour

Today’s spaces are continually in transformation, as configurations change and evolve, and as each design project has a distinct personality. Light has an essential role: it attracts and informs, it communicates, and it can be modern yet timeless. Light is credibility and gratification. Light makes one feel safe, it increases wellness, and stimulates communication and comprehension. Scene Equalizer simplifies the dynamic variation of spaces and perception of light; it sets programmes and everchanging light sequences. The control panel of Scene Equalizer, which operates with a DALI protocol, allows the user to select and carry out different light settings for spaces that are used for work, retail, and service.

PROTOCOL

DALI light management

RGB management

“Change lamp” indication

Remote control

Customized cover

Compatible with Eurostandard and Schuko junction boxes

Maximum customization, easy installation, energy savings, flexibility in light direction: Scene Equalizer is a very active lighting system. From stable, immovable, and monotonous, light now is vibrant and alive, taking advantage of new opportunities and smart technology. Scene Equalizer, based on set parameters, turns the fittings on and starts a scene. The scene is carried on either until the following command or in compliance with planned timing - one environment at a time. The scenic light effects are able to stress emotions, technological needs, and operating developments. Intensity, movement, colour are the new variable parameters in lighting that can be programmed and carried out with just a few simple actions.

Scene Equalizer

Foto: Giuseppe Saluzzi

design Maurizio Varratta

LIGHTING MANAGEMENT SYSTEMS - OPEN iGuzzini

With the new Scene Equalizer system the user can create an all-encompassing light choreography that is appropriate for each space with timed lighting sequences and settings. The system controls up to DALI Il controls a maximum of 64+64 addresses, each address corresponds to a specific dali component that is connected to the lamps (transformers, electronic controllers, relays, dimmers). Different spaces are managed with configurations of up to 32 groups of lamps, each of which can have up to 16 static settings.

Ath - Belgium: Parc Romantique

PC Interface The system can be programmed and managed with a special interface or via a computer station. Each fitting has an icon and can be visualized on downloadable maps. With simple clicks of the mouse the user can interact with the system, moving or activating different features. Black out When power returns after a blackout, the system will automatically restore each lamp to its setting as it was before the power interruption, without having to reconfigure the entire system. Setpoint Selection of the reference value of luminous intensity (by changing the lux). The set value is maintained through continuous compensation of the light from the outside or other light sources.

Scene Equalizer design Maurizio Varratta

LIGHTING MANAGEMENT SYSTEMS - OPEN iGuzzini

Block diagram of system

Maximum number of Scene Central panels is 4. Maximum number of motion detectors is 2. Should there be more, each would require an external power supply and an interface for standard push-button panel. For the system definition, refer to the instructions.

Main unit

Components

Light sources

max 2 (for a greater number see the instruction sheet)

E.T.

Controller code 9630 00

12V

code 9636 00 300W code G741 00 1000W

Motion detector

Fittings DALI FL also RGBW Fittings LED DALI also RGB

code 9843 01

max 4

230V

Dimmer DALI 230V

DALI Bus

Up to 32 peripherals can be connected to the system: • 2 peripheral lines • Scene Central • Scene Zone • Interface for standard push-button panel • Light detector • Motion detector

Remote units

12V

DALI Transformer code 9634 00 35/105W code 9635 00 50/150W

Central code 9628 15

Zone

Bus Interface

Scene Equalizer 64+64 addresses (over 2 lines)

12V

230V

Relay DALI code 9637 00 1x code G681 00 2x

code 9629 15

Woody Light Up w.p. Light Up light (1 load/3 addresses DALI) Linealuce

max 64

Electronic power supply 48÷56Vdc designed to mount on a DIN standard profile code BZ14 00 100W - code BZ15 00 240W code BZ16 00 480W Interface PC + software Scene Organizer code 9633 15

Express max 64 Driver Group (1 load/3 addresses DALI) code SP07 00

Interface code 9632 00

Glim Cube max 64 Driver Group (1 load/3 addresses DALI) code 9856 00

IR receiver code 9868 01

Lamp management

Ledplus X26

max 64

Halogen L.V. Colour LED Interface (1 load/3 addresses DALI)

12V

Halogen

code 9639 00 230V

Incandescent Remote control Fluorescent

code 9735 01 Electronic power supply designed to mount on a DIN standard profile code 9908 00 10W - code 9909 00 24W code 9910 00 72W - code 9911 00 96W code 9912 00 240W

Metal halides

LED

Light sensor code 9631 01

PROTOCOL

Auxiliary services management Curtains

DALI Booster 64

Up to 64 DALI components

code G745 00 Motors

12V

DALI converter -> 1-10V code G765 00

Scene Equalizer design Maurizio Varratta

LIGHTING MANAGEMENT SYSTEMS - OPEN iGuzzini

code

functions

Scene Equalizer Central 9628 Central Panel with 6 keys and monochrome graphic display to manage fittings in all rooms assigned to the system. Supplied with a standard recessed box, 2x3 compartments.

- Manages the fittings in all rooms assigned to the system - Starts and changes the scenes for each environment (each environment can have up to 16 static scenes) - Activates sequences - Uses simple icons to indicate malfunctioning components - Calendar for timed switch-on of sequences and scenes

The maximum number of Scene Central panels is 4 for controller.

130

115

L 115 x 130 x 40 h 115x130

- Allows user to recall settings assigned during configuration - Allows user to adjust light intensity for each preset setting - Can be customized with printed covers

Scene Equalizer Zone 9629 Zone keypad with 8 keys to recall 5 scenes/sequences, general dimming, ON/OFF. Installation on standard 503 recessed box (not included).

115

L 115 x 80 x 20 h 20

115x80

Available in colour 00

Controller 9630 Control unit to be installed in the false ceiling or on a DIN rail Number of DIN modules: 17

Available in colour 00

Each interface is able to manage: - one ON/OFF button - a motion sensor button - two dimming buttons - two buttons to recall scenes, sequences or set points - free installation

- Controls up to 16 sequences - Each space can have up to 16 static settings - Manages up to 128 ballasts - Manages up to 32 environments - Interface for standard keypad with 6 buttons - Manages up to 12 peripherals (Central, Zone, lux sensors, motion detectors) - Manages all light sources (halogen, fluorescent, incandescence, LED, discharge) - Manages RGB lamps

Interface for standard push-button panel with 6 buttons 9632

145

Number of DIN modules: 7

- Software for the installation, configuration and control of a lighting system carried out with the Scene Equalizer system - PC interface and USB cable for the connection to the software

287

145

USB Interface for PC + Scene Organizer software 9633

Scene Equalizer design Maurizio Varratta

LIGHTING MANAGEMENT SYSTEMS - OPEN iGuzzini

accessories and components

code

power

IR receiver 9868

code

Available in colour 01

104

power

DALI Dimmer for mains voltage lamps G741 100/1000W -

Power: 100-1000 W resistive load Input voltage: 230-240 -10%, +6% Vvac Nominal frequency: 50/60 Hz DALI load: 2 mA DALI address 1 Dimming range: 1-100% Room temperature: 0 to +40° C Protection against overheating and short-circuit Output wires maximum length: 50 metres Installation on DIN track Number of DIN modules: 6 Occupies 1 DALI address

Available in colour 00

Remote control 9735 Available in colour 01

DALI 12 V transformer for 35-105 W dimming 9634 -

178

34 47

Available in colour 00 Light sensor 9631 - The sensor regulates the intensity of artificial light according to natural light, based on a fixed set point - Can be fixed either to the wall or to the ceiling - There can be a maximum of 32 light sensors - Voltage: 12 V - Consumption: 40 mA; 0.5 VA - Work temperature: 5 - 45° C

DALI 12 V transformer for 50-150 W dimming 9635 -

178

Available in colour 01

Motion detector 9843 Sensor to activate or deactivate a scene/sequence according to the presence of people in the room. There can be a maximum of 2 motion detectors; should there be more, an external power supply and standard push-button panel interface must be used. - Supply: 10-15 V - Absorbed current: 12 mA - Contact normally closed

Available in colour 00

200

DLC RM -1X DALI 1X dynamic relays 9637 4A -

Maximum current load: 4 mA Input tension: 230-240 -10%, +6% Vac Network frequency: 50/60 Hz Output voltage: 230-240 Vac DALI load: 2 mA DALI address 1 Maximum load according to E-60947 -1000 W for resistive load (AC1) -300 VA for inductive load (AC15) -185 W for monophasic engines - Room temperature 0 to +40° C - Class II - Free installation

Available in colour 01

DALI TR Dimmer 9636 40/300W - Power: 40-300 W (resistive load), 240 VA (inductive load) - Input voltage: 230-240 -10%, +6% Vac - Nominal frequency: 50/60 Hz - DALI load: 2 mA - DALI address 1 - Dimming range: 1-100% - Room temperature: 0 to +40° C - Protection against overheating and short-circuit - Output wires maximum length: 50 metres - Built-in installation in devices or BIN track - Number of DIN modules: 3 - Occupies 1 DALI address

Available in colour 00 42

120

Available in colour 00

DALI 2X Electronic Relays G681 10A -

Available in colour 00

Scene Equalizer design Maurizio Varratta

LIGHTING MANAGEMENT SYSTEMS - OPEN iGuzzini

accessories and components

103

power

code

VIN=100-120/220-240Vac / 50-60 Hz VOUT= 48÷56Vdc (SELV)

17,5

power

Electronic power supply designed to mount on a DIN standard profile 9908 10 W

code

Electronic power supply designed to mount on a DIN standard profile (Dim 73x75x103mm) BZ14 100 W

Available in colour 00

Input voltage: 90-260 Vac Output voltage: 24 +/- 3% Vdc Frequency: 48/63 Hz Nominal power: 10 W Yield: 80% Number of DIN modules: 1

Electronic power supply designed to mount on a DIN standard profile (Dim 60x124x117mm) BZ15 240 W VIN=100-240Vac±15%/ 50-60 Hz VOUT= 48÷56Vdc (SELV)

117

124

Available in colour 00

87,5

Electronic power supply designed to mount on a DIN standard profile 9909 24 W -

66,5

Available in colour 00

Input voltage: 90-260Vac Output voltage: 24 +/- 3% Vdc Frequency: 48/63 Hz Nominal power: 24W Yield: 85% Number of DIN modules: 5

VIN=100-240Vac±15%/ 50-60 Hz VOUT= 48÷56Vdc (SELV)

127

93 105

Electronic power supply designed to mount on a DIN standard profile 9910 72 W -

66,5

Available in colour 00

Input voltage: 230Vac+/-15% Output voltage: 24Vdc+/-3% Frequency: 48/63Hz Nominal power: 72W Yield: 85% Number of DIN modules: 4

Available in colour 00

Driver group for Express RGB SP07 220-240Vac - Includes DALI 500/600mA interface and 30 W 28Vdc electronic ballast. - Can connect up to 9 LED RGB - Occupies 3 DALI addresses

Electronic power supply designed to mount on a DIN standard profile (Dim 82x124x127mm) BZ16 480 W

140

Electronic power supply designed to mount on a DIN standard profile 9911 96 W -

66,5

Input voltage: 230Vac+/-15% Output voltage: 24Vdc+/-3% Frequency: 48/63 Hz Yield: 85% Number of DIN modules: 4

Available in colour 00

Driver group for Glim Cube RGB

9856

220-240Vac

- Includes DALI 350mA interface and 30 W 28Vdc electronic ballast. - Can connect up to 6 LED RGB - Occupies 3 DALI addresses

124

Available in colour 00

120

102

Electronic power supply designed to mount on a DIN standard profile 9912 240 W -

Input voltage: 100-120/220-240Vac Output voltage: 24,5V +/-0,5% Frequency: 47/63Hz Yield: 90% Number of DIN modules: 7

Available in colour 00

Scene Equalizer design Maurizio Varratta

LIGHTING MANAGEMENT SYSTEMS - OPEN iGuzzini

120

code

Colour LED Interface 9639

DALI -> 1-10 V converter G765

- Number of DIN modules: 7 - Controls LED devices - Supplied by the same power supplies used for Ledplus products - Power consumption: 3 W - Each Colour LED interface needs its own supplier - The number of devices controlled by each supplier is indicated in the instruction sheet - Occupies 3 DALI addresses

Available in colour 00

DALI Booster 64. Electronic device for the expansion of DALI systems (up to 64 addresses) G745 -

Available in colour 00

110

accessories and components

Available in colour 00

Architectural Lighting

Photo: Lv Hengzhong

iGuzzini

Shanghai, China: Expo Shanghai 2010 â&#x20AC;&#x153;Better City, Better Lifeâ&#x20AC;? UBPA - Pavilions B2 and C1 Lighting project: Favero & Milan Ingegneria Architectural project: mOa - marioOcchiuto architetture

Master Pro update design iGuzzini

LIGHTING MANAGEMENT SYSTEMS - OPEN iGuzzini

Photo: Gianni Berengo Gardin

Light Building Management

In a frantic, dynamic society where speed and flexibility in contacts and movements are key factors for competitiveness, iGuzzini updates its offer to give a fast, practical answer to modern lighting needs. This is the birth of Master Pro Update: the system increases the current potential and advantages of Master Pro, by managing lighting fixtures with the modern hand-held technology that has become a must in professional working environments. Compatible with Nokia N900, N810, N97, N97 mini and 5800 versions, Master Pro Update breaks the barriers of time and space, operating in full automation for the creation of versatile lighting and colour scenes in multi-space buildings, by simply keying in data on your hand-held computer.

It is a high-performing and versatile, yet user-friendly, system. Luminaires can be switched on/off or dimmed either manually or automatically by using sensors that adjust artificial lighting to balance the amount of daylight, or with human detectors and calendar programming. Lighting scenes and sequences can be stored and played using the keypad of the hand-held device, a button of the control panel or a key on the infrared control. Lighting direction also includes RGB luminaires.

Remote control

Compatible with: Nokia (N900, N810, N97, N97 mini, 5800)

LONWORKS速 PROTOCOL

DALI protocol management up to 32,000 nodes

LON protocol

RGB Management

Lamp status analysis

Compatible with Eurostandard and Schuko junction boxes

Master Pro update design iGuzzini

LIGHTING MANAGEMENT SYSTEMS - OPEN iGuzzini

The map of the reference space is displayed on the bottom of the screen. Click directly on the display by dragging the pen or scroll the scroll tabs to move in the desired direction and manage the existing luminaires.

You can dim each single lamp anywhere in the building by keeping the lamp icon pressed until you reach the desired intensity.

In case of RGB light sources keep the lamp icon pressed to select from the palette the most suitable colour for the light scenes.

Master Pro update design iGuzzini

LIGHTING MANAGEMENT SYSTEMS - OPEN iGuzzini

Block diagram of system Components

12V Master Pro update code G908 15 IN 12V

On/Off Luminaires OUT

MINI I/O Push-button interface code G963 00

BUS LON

12V Sequencer code G964 00

1-10V Luminaires

Control Unit code G902 00 (DIN rail 9 modules) code G903 00 (DIN rail 12 modules) code G904 00 (DIN rail 16 modules)

230V

• Light management (ON/OFF, dimmer, light scenes, programmed sequence of scenes). • Automated light management by using sensors (motion, lux control, twilight). • Automated management of motorised curtains and windows. • Detection and control of plant consumption. • Timed events (daily, monthly, annual). • Local controls by using standard buttons, control panels, remote control, PC software, software on wireless hand-held device. • Remote management through an Internet plant (TCP-IP) • Memorisation of work status and reset in case of blackout. • Memorisation of lamp hours, for plant programmed maintenance. • Number of expandable nodes: up to 32,000 units. • Scalable and flexible architecture. • Compatible with DALI 1-10 V and LON systems.

Remote Units

BUS accessories

Master Pro update up to 32,000 nodes

Lux sensor code G965 01

OUT

Control Unit Curtains code G906 00

IR Receiver code G966 01

Auxiliary keypad with 8 keys code 9715 01-15

IN OUT

Lux sensor via Bus code GG04 01

DALI Interface code G681 00 code 9637 00

Control Unit LON DALI code G905 00 IR Receiver via Bus code GG05 01 12V

Interface for standard push-button BUS Interface code GG07 00

PC Interface + SW Light Configurator code G962 00

Modem line

Auxiliary service management Button 12V

Switch

Infrared remote control code G967 15 code G969 15

230V

Motion Detector code 9843 Curtains

12V SW Light CAD code G970 00

Multifunctional unit code G907 00

Screen for projection

Fixtures

Three-phase energy meter + SW Energy Monitor code G960 00

12V *The software for installation in hand-held device will be available in the download area of www.iguzzini.com

Repeater code G961 00

Ethernet 12V

Light server code 9709 00

Wi-Fi Access Point code 9712 00

Hand-held device*

Master Pro update design iGuzzini

LIGHTING MANAGEMENT SYSTEMS - OPEN iGuzzini

code

functions

Master Pro control panel + Panel Host software G908 Control panel with monochrome graphic display to manage all the connected devices. Supplied with tool software for the programming of the control panel.

- Manages the switching on and off, regulation and recall of light scenes and sequences - Can also manage RGB lamps - The software allows: -to organize the level menu -to save the configured menu on a file -some functions: ON/OFF of single light points or groups of light points, scheduled ON/OFF - Mains voltage:9/24Vac/dc

Available in colour 00

LCL 608 control unit G903 Control module with LonWorks速 protocol for the on/off management and to dimmer lighting devices. Allows interfacing with peripherals such as IR sensors for remote control and light sensors, motion detectors, standard buttons - Assembled on DIN rail or false ceiling (12 modules) Available in colour 00

LCL 622 control unit G904 Control module with LonWorks速 protocol for the on/off management and to dimmer lighting devices. Allows interfacing with peripherals such as IR sensors for remote control and light sensors, motion detectors, standard buttons - Assembled on DIN rail or false ceiling (16 modules) Available in colour 00

- 8 relay outputs (dry contacts) for on/off control of lamps or other electrical loads (motors, actuators etc) - 4 analogue outputs (0-10 V) for dimming control - 6 digital inputs for push-button interface or motion detector or other sensors - Auxiliary inputs: IR receivers and Lux sensors - Output (12 Vdc) to supply the devices - Supply voltage: 230 V - Maximum current: 6 A output - 20 A total - I out: max 300 mA - 12 relay outputs (dry contacts) for on/off control of lamps or other electrical loads (motors, actuators etc) - 4 analogue outputs (0-10 V) for dimming control - 12 digital inputs for push-button interface or motion detector or other sensors - Auxiliary inputs: IR receivers and Lux sensors - Output (12 Vdc) to supply the devices - Supply voltage: 230 V - Maximum current: 6 A output - 25 A tot. - I out: max 300 mA

120

- 4 relay outputs (dry contacts) for on/off control of lamps or other electrical loads (motors, actuators etc) - 6 digital inputs for push-button interface or motion detector or other sensors - Auxiliary inputs: infrared receivers and Lux sensors - Output (12 Vdc) to supply the devices - Supply voltage: 230 V - Maximum current: 6 A output - 15 A total - I out: max 300 mA

155

120

LCL 604 control unit G902 Control module with LonWorks速 protocol for the on/off management of lighting sources. Allows interfacing with peripherals such as IR sensors for remote control and light sensors, motion detectors, standard buttons. - Mounting on DIN rail or false ceiling (9 modules)

132

210

120

Installation on a 506E recessed box (106x117x52 mm).

132

270

Master Pro update design iGuzzini

LIGHTING MANAGEMENT SYSTEMS - OPEN iGuzzini

functions

LON-DALI 64 control unit G905 Control module with LonWorks® protocol for the on/off management and to dimmer DALI lighting sources. Allows interfacing with motion detectors. - Mounted on DIN rail or false ceiling (11 modules)

- Control unit for a DALI system - Can control 64 independent DALI units - 6 digital inputs for motion detectors, standard buttons - Output: 12 Vdc to supply the devices - Supply voltage: 230 V - One auto-feed DALI output - Backup: keeps system configuration memorised in case of black out, and allows resetting - Memorisation of the total number of working hours of devices - Interface Bus: up to 16 peripherals (Office, lux sensors, motion detectors, interface for standard push-button)

Available in colour 00

Blinds module G906 - Control module with LonWorks® protocol for the command of motorised curtains, blinds and windows - Mounting: DIN rail, fixed to false ceiling - DIN modules 9

- Direct command of 2 blinds - Operation: beginning and run aim, middle position - 6 digital inputs for motion sensor, standard buttons - Aux inputs: max no. 4 lux sensors/IR receivers - 6 DIN modules - I out: max 300 mA

150

190

code

145

150

Multifunctional unit G907 LonWorks® device for the management of specific programmable functions. It allows to acquire potential functions which would otherwise require a PC. Memory capacity for back-up of system status and real time clock to enable event scheduling. - DIN modules 6

- Auxiliary control unit - Back-up: keeps system configuration memorised in case of black out, and allows resetting - Scheduler: allows the activation of programmed events - Lux control: implements up to 64 light controls - Memorisation of the total number of working hours of devices - Supply voltage: 12 Vdc/ac - I out: max 70 mA

116

Available in colour 00

105

Repeater G961 LonWorks® device to amplify and regenerate the network signal, necessary to reach long distances. Fixing on DIN rail. - DIN modules 6 Available in colour 00

The repeater is used to connect two LonWorks® net segments, allowing to double the number of network nodes (from 64 to 128) and the maximum distance (from 500 to 1000 m in free topology). - Two incorporated line terminators - Supply tension: 12 Vdc - I out: max 70 mA

116

Available in colour 00

Master Pro update design iGuzzini

LIGHTING MANAGEMENT SYSTEMS - OPEN iGuzzini

code

functions

Three-phase energy meter + energy monitor software G960 LonWorks® device for three-phase measurement of consumption. Allows to measure voltage, current, power factor and energy consumption for all three phases. Supplied with a tool software to store and graphically display consumption data. - DIN modules 6

- LonWorks® module for consumption measurement - Connection to one-phase systems or star three-phase, triangle three-phase, two-phase - Network supply: 230 Vac +/- 10%, 50/60 Hz - Measurement frequency: 35-400 Hz - 7-segment display, 3x3 digits on each line

Available in colour 00

PC INTERFACE + Software Light Configurator G962 PC serial interface for connection to LonWorks® network. Supplied with tool software for the configuration and logic programming of the entire system. Available in colour 00

150

The software allows to: - Calculate energy and power figures - Read consumption data in real time

- Serial interface device, PC/LonWorks® network - Contains the libraries on which system’s configuration and programming software are based - Works with all networks based on transceiver (FTT-10, LPT-10 and TP/XF78. PLT-22 is optional) - High speed in modification messages or event-driven updates: up to 100 packages/second at 38400 bauds - ACTIVEX module available The software detects all nodes in a network: - Allows univocal identification of each lamp - Allows to configure all the accessories in the plant

Master Pro update design iGuzzini

LIGHTING MANAGEMENT SYSTEMS - OPEN iGuzzini

code

MINI I/O Button interface G963

Motion detector 9843

accessories and components

Sensors for motion detection.

LonWorks速 device to switch on and off and to regulate any system user by using common keypads. - DIN modules 3

- LonWorks速 interface module for programmable standard buttons, to switch lamps on and off and to dimmer them - Configurable from 3 to 11 inputs - Supply voltage: 124 Vdc (from control units) - I out: max 40 mA

Supply: 10-15 V Absorbed current: 12 mA Contact normally closed There can be a maximum of 2 motion detectors

Available in colour 01

Sequencer programming unit G964

Available in colour 00

Light sensor G965 Device to measure natural light - Installation: support for wall fixing

LonWorks速 device to store and run dynamic light scenarios and sequences, called in by using standard push-buttons connected to it. - DIN modules 3

- Allows automatic regulation of lamps - Control algorithm: instantaneous or mediated readings - Control functions: set point, threshold - Supply voltage: 12 V (from the control units) - Connection to the AUX input of control units - I out: max 40 mA

- LonWorks速 module to program dynamic scenes or light sequences - Manages up to 8 inputs, button to activate programmed events - Input voltage: 12 V (from control units) - I out: max 40 mA

Available in colour 01

62,5

Infrared device to acquire commands from the remote control. Programmable with univocal code for each environment or absolute code.

IR receiver BUS interface GG05 Infrared device to acquire commands from the remote control. Programmable whit univocal code for each environment or absolute code

- Programmable with univocal code for single rooms - Supply: 12 V (from the control units) - Connection to the AUX inputs of control unit - I out: max 40 mA

Programmable whith univocal code for single rooms - Supply: 12 V(from interface BUS) - Connection to the Interface BUS of control unit LON-DALI (G905)

Available in colour 01

Infrared remote control G967

8-key office keypad 9715

Remote control to command single light points, groups of lamps, light scenes or sequences. -

Version with programmable general buttons Buttons can be configured to call in scenes On/Off and dimmer of lamps or groups Supply: 9 V

Available in colour 15

141

IR receiver G966

Available in colour 00

115 40

Office keypad whit 8 keys to recall scenes/sequences, On/Off, general dimming or group of lamps. Installation on standard 503 recessed box(not included). - Allows user to recall settings assigned during configuration - On/Off, general dimming - Supply for Interface BUS - Connection to the Interface BUS of control unit LON-DALI (G905)

Available in colours 01-15

Master Pro update design iGuzzini

LIGHTING MANAGEMENT SYSTEMS - OPEN iGuzzini

62,5

code

Totally programmable IR remote control G969

DLC-RM 2X DALI DALI 2X Electronic Relays G681 10A

Remote control to command single light points, groups of lamps, light scenes or sequences.

Version with programmable general buttons Buttons can be configured to call in scenes On/Off and dimmer of lamps or groups Supply: 9 V

Available in colour 15

141

accessories and components

Maximum current: 2x10A Input voltage: 230-240 -10%, +6% Vac Nominal frequency: 50/60 Hz Output voltage: 2 dry contacts DALI load: 2 mA DALI address 2 Maximum charge according to EN-60947 - 2500 W for resistive load (AC1) - 600 VA for inductive load (AC15) - 440 W monophasic engines Room temperature: 0 to +40째 C Class II Installation on DIN track Number of DIN modules: 4

Available in colour 00

200

Light sensor via Bus GG04

Wi-Fi Access Point 9712

Device to measure natural light - Installation: support for wall fixing - Allows automatic regulation of lamps - Control algorithm: instantaneous or mediated readings - Control functions: set point, threshold - Supply voltage: 12 V (from the control units) - Connection to the unit control LON-DALI (G905)

Device used for wireless connection to Master Pro lighting system. It can be connected to the Ethernet or in Repeating mode. Through last-generation smartphones or portable devices with WiFi connection you can: - Control lights either individually or in groups - Load scenes or sequences - Display areas and switch-on status with interactive maps in all areas covered by the service.

Available in colour 01

Available in colour 00

DLC RM-1X DALI 1X dynamic relays 9637 4A

Light Server from DIN bar 9709

Maximum current load: 4 mA Input tension: 230-240 -10%, +6% Vac Network frequency: 50/60 Hz Output voltage: 230-240 Vac DALI load: 2 mA DALI address 1 Maximum load according to E-60947 - 1000 W for resistive load (AC1) - 300 VA for inductive load (AC15) - 185 W for monophasic engines - Room temperature 0 to +40째 C - Class II - Free installation

Server for connection to Master Pro lighting system that controls multiple simultaneous accesses for licensed users of LightCAD and Light Touch Manager software applications. Access is permitted to: - desktop PCs connected to the Ethernet - mobile terminals connected to the Ethernet in WiFi mode. Ethernet switch is necessary for simultaneous connection both with desktop PCs and mobile terminals.

Available in colour 00

Interface for standard push-button BUS Interface GG07 Device with 6 digital inputs programmable to connect pushbuttons/ switchs or sensors - Interface for standard push-button programmable ON/OFF and dimming lamps. - 6 digital inputs programmable - Supply for Interface BUS - Connection to the Interface BUS of control unit LON-DALI (G905)

Available in colour 00

Colour Quick design Maurizio Varratta

LIGHTING MANAGEMENT SYSTEMS - PRECONFIGURED iGuzzini

Compatible only with iGuzzini lighting fixtures

Segrate - Italy: Ponte degli Specchietti

Photo: by kind permission of Enel Sole srlc

Intuitive and user-friendly, Colour Quick is a colour control system for LED and fluorescent RGB luminaires. It plays predefined scenes and sequences to design settings with total flexibility. Space is alive and in continuous motion, with the possibility to create customised lighting directions.

Plug and Play

RGB

Remote control

Compatible with Euro standard and Schuko connection boxes

Used to attract, communicate and signal, colour highlights and valorises all settings that need a magic suggestive atmosphere. The system is automatically configured with Plug and Play technology for immediate use.

Colour Quick design Maurizio Varratta

LIGHTING MANAGEMENT SYSTEMS - PRECONFIGURED iGuzzini

The buttons with light memory are used to obtain max. 7 colour variations, 6 predefined sequences and change the speed of the selected sequences.

colour luminous scenes

on/off in soft mode

allow for using 6 predefined sequences

buttons with luminous memory control buttons used to change the execution speed of the selected sequence

selection of specific colours colour is changed at every touch for a max. of 7

Colour Quick design Maurizio Varratta

LIGHTING MANAGEMENT SYSTEMS - PRECONFIGURED iGuzzini

Block diagram of system Colour Quick Max 64 DALI loads

Remote units

Main unit

Components

RGB luminaires

Colour Quick

Electronic power supply designed to mount on a DIN standard profile 220รท240V 24Vdc

code 9730 01/15

code 9908 00

The number of products managed by the system is determined by the ratio between the maximum permitted load (64 DALI loads) and the individual loads of each product. For the system definition, refer to the instructions

Lineup max 21 (3 loads/DALI addresses)

Compact Easy max 16 (4 loads/DALI addresses)

iSign max 21 (3 loads/DALI addresses)

MaxiWoody Platea

max 64 (1 load/3 addresses DALI)

Woody Light Up w.p. Light Up light (1 load/3 addresses DALI) Linealuce

max 64

max 64 (DALI loads) Remote control code 9731 01

Electronic power supply 48รท56Vdc designed to mount on a DIN standard profile code BZ14 00 100W code BZ15 00 240W code BZ16 00 480W

Express max 64 Driver Group (1 load/3 addresses DALI) code SP07 00

Glim Cube max 64 Driver Group (1 load/3 addresses DALI) code 9856 00

Ledplus X26

max 64 Colour Led Interface (1 load/3 addresses DALI) code 9639 00

Electronic power supply designed to mount on a DIN standard profile code 9908 code 9909 code 9910 code 9911 code 9912

00 00 00 00 00

10W 24W 72W 96W 240W

Colour Quick design Maurizio Varratta

LIGHTING MANAGEMENT SYSTEMS - PRECONFIGURED iGuzzini

code

Colour Quick 9730 L 115 x 80 x 20 115

115x80

accessories and components code

power

code

Available in colour 01

17,5

power

Electronic power supply designed to mount on a DIN standard profile 9908 10 W

Remote control 9731

Input voltage: 90-260 Vac Output voltage: 24 +/- 3% Vdc Frequency: 48/63 Hz Nominal power: 10 W Yield: 80% Number of DIN modules: 1

103

Electronic power supply designed to mount on a DIN standard profile (Dim 73x75x103mm) BZ14 100 W VIN=100-120/220-240Vac / 50-60 Hz VOUT= 48÷56Vdc (SELV) Available in colour 00

Electronic power supply designed to mount on a DIN standard profile 9909 24 W

Available in colour 00

87,5

66,5

Input voltage: 90-260Vac Output voltage: 24 +/- 3% Vdc Frequency: 48/63 Hz Nominal power: 24W Yield: 85% Number of DIN modules: 5

VIN=100-240Vac±15%/ 50-60 Hz VOUT= 48÷56Vdc (SELV) Available in colour 00

117

Electronic power supply designed to mount on a DIN standard profile 9910 72 W

124

Available in colour 00 Electronic power supply designed to mount on a DIN standard profile (Dim 60x124x117mm) BZ15 240 W 105

66,5

Input voltage: 230Vac+/-15% Output voltage: 24Vdc+/-3% Frequency: 48/63Hz Nominal power: 72W Yield: 85% Number of DIN modules: 4

127

VIN=100-240Vac±15%/ 50-60 Hz VOUT= 48÷56Vdc (SELV) Available in colour 00

93 140

120

- Includes DALI 350mA interface and 30 W 28Vdc electronic ballast. - Can connect up to 6 LED RGB - Occupies 3 DALI addresses

Available in colour 00

Electronic power supply designed to mount on a DIN standard profile 9912 240 W -

102

Input voltage: 100-120/220-240Vac Output voltage: 24,5V +/-0,5% Frequency: 47/63Hz Yield: 90% Number of DIN modules: 7

Available in colour 00

Available in colour 00 Driver group for Glim Cube RGB 9856 220-240Vac

Input voltage: 230Vac+/-15% Output voltage: 24Vdc+/-3% Frequency: 48/63 Hz Yield: 85% Number of DIN modules: 4

Available in colour 00

Driver group for recessed RGB SP07 220-240Vac

- Includes DALI 500/600mA interface and 30 W 28Vdc electronic ballast. - Can connect up to 9 LED RGB - Occupies 3 DALI addresses

Electronic power supply designed to mount on a DIN standard profile 9911 96 W -

66,5

124

110

124

Available in colour 00 Electronic power supply designed to mount on a DIN standard profile (Dim 82x124x127mm) BZ16 480 W

120

Colour LED Interface 9639 Number of DIN modules: 7 - Controls LED devices - Supplied by the same power supplies used for Ledplus products - Power consumption: 3 W - Each Colour LED interface needs its own supplier - The number of devices controlled by each supplier is indicated in the instruction sheet - Occupies 3 DALI addresses

Available in colour 00

Nuvola is a system of indirect lighting for urban areas which creates a uniform, glare-free illumination on the road. The system comprises a diffuser screen in polyester resin reinforced with glass fibre and a Lingotto floodlight, all mounted on a pole.

Dispersion of the upward light flow < 5%

Visual comfort

Customised emblem

W-Saving: automatic flow regulator

Nuvola design R.Piano & Meccano

iGuzzini

The product has been awarded the following prize: - Compasso dâ&#x20AC;&#x2122;Oro 1998

Height: 10000 mm. Link roads, squares, avenues with intense traffic, crossroads.

Height: 6000 mm. Squares, avenues and moderate traffic, crossroads.

scale 1:200

Nuvola

INDIRECT LIGHTING SYSTEMS FOR URBAN AREAS iGuzzini

Augusta - Germany: Tram stations

Photo: Eckhart Matthaus

design R.Piano & Meccano

Strengthening collar

Flush inspection lid IP44

Resistance to snow load up to 250 Kg

• Nuvola is an indirect lighting system for outdoor areas, for use with metal halide or sodium discharge lamps. • Pole-mounted. • Nuvola has an optical assembly (single or double), diffusing screen, and mounting pole. • Aluminium optical assembly and glass frame, with dual phosphoruschromium plating of the base metal, followed by passivation heat treatment at 120° C, grey painting, and curing at 150° C. It is coupled to the glass holding frame. The sealing glass is tempered sodium-calcium, colourless and fully transparent. The steel retention cable has 1.6 mm diameter and is plastic coated. The black silicone gasket has a hardness rating of 50 Shore. The parabolic reflector is made with natural polished aluminium. Painted aluminium control gear box tethered to the optical assembly with a multi-strand armoured steel cable (for model with a double optical assembly). The grey electric cable polymeric or brass grommet is dimensioned to the PG 11 standard. The light-diffusing shield is made of a fibreglass reinforced polymeric resin. • Pull-out aluminium control gear plate subjected to a pre-anodizing and degreasing treatment; power supply with a non-explosive power factor correction capacitor, ballast, starter, and quick-connecting terminals. • The lighting that is dispersed into the upper hemisphere above this luminaire is less than 5%. • All screws are A2 stainless steel. • Painted EN1706AC 46100LF aluminium alloy arm and mounting flanges. • The pole is made of EN 10025S235JR, 70 micron hot galvanized steel. Available models are either cylindrical or tapered. It has a texturised acrylic powder-coating paint surface finish. Pole diameter is 120 mm, and it is available with a thickness of 4 mm and in different lengths (6 and 10 m). Poles can either be supplied with a base-plate or for cementing directly into the ground. The top end cap is made of polycarbonate. • The steel base-plate that anchors Nuvola to the ground is square and available in various sizes and thicknesses. It has holes for the anchor bolts. The pole is welded to the plate with reinforcing gussets. Stainless steel anchor bolts and mounting hardware. • Stability under a load of snow has been verified for a weight of up to 250 Kg and for locations up to 750 meters above sea level. For locations more than 750 metres above sea level, or for more information about stability, contact the manufacturer. • The technical characteristics of the fitting comply with EN60598-1 standard. • IP65 (Optical Assembly) • IP44 (pole lid) • F seal • ENEC approval • Class of Insulation II

Nuvola design R. Piano & Meccano

INDIRECT LIGHTING SYSTEMS FOR URBAN AREAS iGuzzini

Q/ /$

Â&#x192; 635($' QDUURZ 7+52: VKRUW 6/, ',1 .% &(1 * '

L=400 Ă¸ 18

150x50

hole foro Ă¸ Ă¸ 80 80

200 contropiastra fixing plate

Ă¸ 120

Â&#x192;

Ă¸ 194 3200

1000

hole foro Ă¸ 188 188

Ă¸ 194

Ă¸ 100

L=500 Ă¸ 24

150x50

416 1390

300 fixing plate contropiastra

Optical assembly with diffusor screen together with sunk pole 4172 2x250 W HIT-DE 7000 2x250 W HST-DE 4174 2x400 W HIT-DE 7000 Optical assembly with diffusor screen together with pole with plate 4178 2x250 W HIT-DE 6000 2x250 W HST-DE 4180 2x400 W HIT-DE 6000

Ă¸ 120

6000

Ă¸ 120

310x95 1000 L=500 Ă¸ 18

150x50

hole foro 80 Ă¸Ă¸80

310

1000

350 1000

310x95

200 contropiastra fixing plate

IP65

Optical assembly with diffusor screen together with sunk pole 4175 2x250 W HIT-DE 11000 2x250 W HST-DE 4177 2x400 W HIT-DE 11000 Optical assembly with diffusor screen together with pole with plate 4181 2x250 W HIT-DE 10000 2x250 W HST-DE 4183 2x400 W HIT-DE 10000

Ă¸ 120

6800

Ă¸ 120

IP65 3200

310x95 1000

350 1000

310x95

L=650 Ă¸ 24

150x50

Ă¸ 194

hole foro Ă¸Ă¸188 188

440

2780

1000

3200

Ă¸ 194

1200

Fixing plates with anchoring bolts 0453 for 4178-4180 1164 for 4181-4183

310x95

440

350 1000

310x95

1000

1200

3200

IP65

Fixing plates with anchoring bolts 1168 for 4166-4168 1165 for 4169-4171

Ă¸100

Â&#x192;

310x95

Ă¸ 100

: +67 '( )F

310x95

& J Â&#x192; &,(

Ă¸ 100

Â&#x192;

Ă¸ 120

6000

Â&#x192; ,PD[ FG .OP

IP65

Optical assembly with diffusor screen together with sunk pole 4163 250 W HIT-DE 11000 250 W HST-DE 4165 400 W HIT-DE 11000 Optical assembly with diffusor screen together with pole with plate 4169 250 W HIT-DE 10000 250 W HST-DE 4171 400 W HIT-DE 10000

Ă¸ 120

7+52: VKRUW 6/, ',1 .% &(1 * '

+,7 '( )F

Q/ /$

Â&#x192; 635($' QDUURZ

6800

& J Â&#x192; &,( Â&#x192;

1000

Â&#x192;

310

,PD[ FG .OP

6000

Optical assembly with diffusor screen together with sunk pole 4160 250 W HIT-DE 7000 250 W HST-DE 4162 400 W HIT-DE 7000 Optical assembly with diffusor screen together with pole with plate 4166 250 W HIT-DE 6000 250 W HST-DE 4168 400 W HIT-DE 6000

Fixing plates to be ordered separately

350 1000

length

1000

lamp

6800

code

300 contropiastra fixing plate

Nuvola design R. Piano & Meccano

INDIRECT LIGHTING SYSTEMS FOR URBAN AREAS iGuzzini

accessories code

7100

7900

3600

Before using this accessory, check the wind-thrust stability of the pole based on both the characteristics of the location and the regulations in force.

3600

Banner holder 1345

The diagram illustrates the correct installation position of the banner on single and twin floodlight applications

components code

code

Flow regulator BG42 230 V BG43 220 V

Terminal box 1863 The terminal box is available in colour 00, has four three-way poles and is designed for bridge wiring. It is equipped with two fuse holders for dim. 10,3x38 - 380 V - max 20 A. Suitable for power supply cables 16 mm2 in section at the inlet and 2,5 mm2 at the outlet, for the light source connection. Made in insulation class II.

IP55

Available in colour 00 Serial programming interface + Win Saving 1.0 Software art. G886 The system is presented on page 262

Door key 0246

Fixing spring for flux regulator on poles BZC1 for poles with diam. from 121 to 138 mm

Available in colour 00

Available in colour 00 The poles are suitable for fixing on I, F and E. For other countries, add the specific fixing systems featured in the table.

/X[ K P D Â&#x192;

D - CH

10000

B972**

10000

+,7 '( )F :

(Above the ground)

DIN guide for D and CH Marine grade plywood support for terminal board for GB

4163-4165-4169-4171-4175-4177-4181-4183 /X[ K P D Â&#x192;

h pole

B943*

* **

4160-4162-4166-4168-4172-4174-4178-4180

code

Nuvola design R. Piano & Meccano

Photo: Martine Hamilton Knight

iGuzzini

Romford - United Kingdom: Honda Architectural project: Morton Wykes

All the appeal of the Nuvola design in a new miniaturised version that extends and completes the indirect lighting range. The small size and the possibility of wall mounting make MiniNuvola the ideal choice for installations in squares, gardens, historical and monumental centres.

MiniNuvola design Piano Design Workshop

iGuzzini

5000 mm

Dispersion of the upward light flow < 5%

Visual comfort scale 1:200

MiniNuvola design Piano Design Workshop

Como - Italy: Viale Marconi

Photo: Giuseppe Saluzzi

iGuzzini

Resistance to snow load up to 205 Kg

INDIRECT LIGHTING SYSTEMS FOR URBAN AREAS WALL SYSTEMS FOR URBAN AREAS

• MiniNuvola is an indirect lighting system for outdoor areas, for use with metal halide or sodium discharge lamps. • The fixture can be installed on a pole or wall-mounted. • MiniNuvola has an optical assembly, diffusing screen, and mounting pole. • Aluminium optical assembly, with dual phosphorus-chromium plating of the base metal, followed by passivation heat treatment at 120° C, grey painting, and curing at 150° C. It is coupled to the glass holding frame. The sealing glass is tempered sodium-calcium, colourless and fully transparent. The steel retention cable has 1.6 mm diameter and is plastic coated. The black silicone gasket has a hardness rating of 50 Shore. The parabolic reflector is made with natural polished aluminium. Painted aluminium control gear box tethered to the optical assembly with a multi-strand armoured steel cable (for model with a double optical assembly). The grey electric cable polymeric or brass grommet is dimensioned to the PG 11 standard. The lightdiffusing shield is made of a fibreglass reinforced polymeric resin. • Pull-out aluminium control gear plate subjected to a pre-anodizing and degreasing treatment. Painted aluminium control gear box; power supply with a non-explosive power factor correction capacitor, ballast, starter, and quick-connecting terminals. • The lighting that is dispersed into the upper hemisphere above this luminaire is less than 5%. • All screws are A2 stainless steel. • Painted EN1706AC 46100LF aluminium alloy arm. Painted EN1706AC 44100KF aluminium alloy mounting flange. • The pole is made of EN 10025S235JR, 70 micron hot galvanized steel. It has a texturised acrylic powder-coating paint surface finish. Pole diameter is 102 mm, and it is available in a thickness of 3 mm and a length of 5 m. Poles can either be supplied with a base-plate or for cementing directly into the ground. The top end cap is made of polycarbonate • The steel base-plate that anchors MiniNuvola to the ground is square (260x260x15 mm), and has 330x18mm holes for anchor bolts. The pole is welded to the plate with reinforcing gussets. Stainless steel anchor bolts and mounting hardware. • Stability under a load of snow has been verified for a weight of up to 205 kg. For more information about stability, contact the manufacturer. • The technical characteristics of the fitting comply with EN60598-1 standard. • IP65 (Optical Assembly) • IP54 (pole lid) • F seal • ENEC approval • Class of Insulation II

MiniNuvola design Piano Design Workshop

INDIRECT LIGHTING SYSTEMS FOR URBAN AREAS WALL SYSTEMS FOR URBAN AREAS

iGuzzini 03

& J Â&#x192; &,(

Q/ /$ 635($' DYHUDJH

Â&#x192;

+,7 '( 5[ V

Â&#x192; 186x45 1060

186x45

/X[ K P D Â&#x192;

L=400 Ă¸ 18

62x42

hole foro Ă¸Ă¸80 80

+,7 '( 5[ V :

640

200 fixing plate contropiastra

921

Fixing plate with anchoring bolts 1168 for 7740

4500

6/, ',1 .% &(1 * '

Ă¸ 102

Â&#x192; 7+52: VKRUW

5000

Â&#x192;

Ă¸ 100

IP65

,PD[ FG .OP

310

Optical assembly with diffusor screen together with sunk pole 7739 150 W HIT-DE 5600 150 W HST-DE Optical assembly with diffusor screen together with pole with plate 7740 150 W HIT-DE 5000 150 W HST-DE

Fixing plates to be ordered separately

5000

length

220 1060

lamp

600

code

987

Optical assembly with diffusor screen 7741 150 W HIT-DE 150 W HST-DE

4500

IP65

987

components code

code

Terminal box 1862

Door key 0227

The terminal box is available in colour 00, has four three-way poles and is designed for bridge wiring. It is equipped with a fuse holder for dim. 8,5x31,5 - 380 V - max 20 A. Suitable for power supply cables 16 mm2 in section at the inlet and 2,5 mm2 at the outlet, for the light source connection. Made in insulation class II.

Available in colour 00

concept

Archilede iGuzzini

The product has been awarded the following prize: - iF Design Award 2010

A soft, clean shape characterises this LED luminaire with state-of-the-art technology, provided with 4 preset operation profiles (possibility of personalized cycles on demand) to fully comply with all lighting requirements of urban roads. Applied with universal coupling on poles with ending part with No upward emission of light flow

46-76 diam. on conical curved poles or poles with arms, Archilede is the ideal product to guarantee high luminous efficiency and excellent visual comfort, with maximum energy saving and low running costs. The complete lack of upward light emission contributes to cut down lighting pollution.

Ballast with multiple operation modes

Height: 9000 mm Height: 8000 mm Height: 7000 mm Height: 6000 mm

scale 1:200

Archilede iGuzzini

Urban and interurban roads characterised by high longitudinal uniformity values (min. Ul= 0.6) and mostly vehicular traffic. An example is represented by roads in ME3b lighting category.

Urban neighbourhood and urban interneighbourhood roads characterised by longitudinal uniformity values from 0,5 to 0,6 and mostly vehicular traffic, with roundabouts, bicycle lanes and sidewalks. The example considers a street in ME3c lighting class (illuminated with DELPHI 59LED).

Urban local roads with vehicular traffic and 50Km/h speed limit, in which the average maintained luminance is 0.75 cd/m2. They belong to the ME4a/ME4b lighting category, with excellent longitudinal and general luminance uniformity values.

Urban roads with fast vehicular traffic, main interurban roads with vehicular traffic with 70 and 110 km/h speed limits characterised by very high longitudinal uniformity values. Roads in lighting class Me3a.

101 W 84 LED cool white h (m)

L (m)

a (m)

33,5

0,4

0,6

70 W 59 LED cool white (road)) h (m)

L (m)

a (m)

0,5

0,6

43 W 39 LED cool white h (m)

L (m)

a (m)

0,75 0,4

0,6

154 W 98 LED cool white High Power h (m)

L (m)

a (m)

1,2 0,41 0,70

h= Installation height L= Road width Nc= Number of lanes Na= Number of luminaires a= Distance between poles Lm= Average luminance in cd/m2 Em= average lighting in lx Uo= Average uniformity Ul= Longitudinal uniformity

Archilede iGuzzini

Urban roads Urban neighbourhood and interneighbourhood roads (ME3C) with adjacent areas not classificable according to the EN13201 standard where the SR parameter must be applied.

Urban local roads Local urban roads (ME4b) with adjacent areas that are not classifiable in accordance with EN 13201 where the SR parameter must be applied.

98 W 81 LED cool white h L a Nc Lm Uo (m) (m) (m) 7

0,4 0,5 0,5

62 W 55 LED cool white h L a Nc Lm Uo (m) (m) (m) 6

Urban local roads For streets with vehicular traffic with sidewalk or other pedestrian-bycicle lane, illuminated with this innovative optic that directs 40% of the flux behind the pole.

23 0,75 0,4 0,6 0,5

105 W 98 LED cool white (road) h (m)

L (m)

a (m)

7,5

0,9

0,5

105 W 98 LED cool white (S4 sidewalk)

Roundabout lighting The iGuzzini LED optic has been developed to satisfy the increasing need for lighting of roundabout areas (which have larger and larger size to facilitate the street flow compared to junctions); lighting can be obtained by installing the products on the internal perimeter of the roundabout. The example considers a roundabout with 26 m internal diameter, a 7m-wide street in C2 lighting class.

h (m)

L (m)

a (m)

Emed Emin 7 lux

1 lux

101 W 84 LED cool white h (m)

L (m)

0,47

concept

The Archilede optical assembly can be installed: • pole-top installation on cylindrical columns • on conical curved poles • on poles with arms

adapter for poles ø 102

Pole-top application is possible on columns with end parts with ø 46 to 76 mm. Adapter for installation available for columns with ø 102 mm

The steel poles - buried or with anchoring plate - are protected by texturised powder acrylic paint.

palo pole

riduttore adapter

vano ottico optical assembly

for poles ø 102

The commercial order should be completed based on the elements making up the system.

Archilede iGuzzini

Decorative point available with blue or neutral white LED.

The pole with arm is available in two configurations: single and double optical assembly.

The conical curved pole is available in two configurations: single and intermediate optical assembly.

Poles (6700 and 8700 height) are available in versions with plate or buried.

Poles with plate are available in two heights: 6000 and 8000.

pole palo

optical vanoassembly ottico

The commercial order should be completed based on the elements making up the system.

pole palo

vano assembly ottico optical

The commercial order should be completed based on the elements making up the system.

Archilede

DIRECT LIGHTING SYSTEMS FOR URBAN AREAS iGuzzini

Adjustability ± 20°

Universal adapter for poles (from ø 46 to 76)

Self learning driver

Replaceable driver and ballast assembly

Spike protection

Twilight photocell (ON 70 lux OFF 35 lux) on demand

Versions with DALI electronics (for remote management of each single light point) available on demand.

PROTOCOL

Versions compatible with two dual-operating systems (electrical installations with pilot cable) available on demand.

100%

• Direct lighting fixture for LED’s with road optic. • Pole-top or lateral installation with tapered poles for ø 46/60/76 mm. • Die-cast aluminium optical assembly and frame subject to chromate treatment, double primer, passivation at 120° C, grey liquid paint, baking at 150° C. • Frame fixed with captive screws, 50 Shore black silicone gasket between body and frame, PMMA 3 mm thick diffuser joined with silicone to the body. • Monochromatic LED version with circuits with 39-55-59-81-84-98 power LEDs with Cool White (6000K) and Neutral White (4200K) colour temperature, optics with plastic lens. • LED average life at RT 25°C: L70 =>100000 h. • Electronics average life at RT 25°C=100000 h • Pull-out control gear with fast-coupling connectors. • 220-240Vac 50/60 Hz built-in selv electronic ballast. • Driver with automatic control system of internal temperature. • 100% operation for -20 °C / + 45°C Room Temperature, at higher RT values the system reduces the LED power current intensity to allow for correct operation.

• Product for -40 °C RT available on demand. • Driver with 4 predefined operation profiles selected with dip switches, possibility of personalised operation cycles with dedicated software via USB flash drive. • Main spike protection system up to 4Kv. • Vertical orientation with graduated scale, +20°/ -20° in pole-top installation and +5°/-20° in lateral installation. • Terminal block with 4 AT fuse. • Versions with twilight photocell (70 lux on-35 lux off). • Cylindrical element made of die-cast aluminium for columns with ø 60/76 mm and adapter for columns with ø 46/60 mm, pins with safety nuts for tightening. • All external screws made of stainless steel. • No luminous flux emitted upwards with system in horizontal position. • The technical characteristics of the fitting comply with EN60598-1 standard. • IP67 • ENEC approval • IMQ Performance • F seal • Class of Insulation II

50%

Versions compatible with flux regulators available on demand.

Archilede, designed by iGuzzini for Enel Sole Versions with electronics for Ta up to -40°C available on demand.

Archilede

DIRECT LIGHTING SYSTEMS FOR URBAN AREAS iGuzzini Registered Design Patent Pending

optic

The products are suitable for operation at -20Â°C. ,PD[ FG

Optical assembly with monochromatic LED BD99 39x1 W cool white ST BE94 39x1 W neutral white ST IP67

Â&#x192;

Cool white = 6000K Neutral white = 4000K [ : 1HXWUDO

Â&#x192;

Cool white = 6000K Neutral white = 4000K [ : /HG 1HXWUDO

IP67

Â&#x192;

Cool white = 6000K Neutral white = 4000K

Â&#x192;

/('

Q/ /$

Â&#x192; 635($' QDUURZ

7+52: LQWHUPHGLDWH 6/, ',1 .% &(1 * '

Â&#x192; ,PD[ FG

: 1HXWUDO

& J Â&#x192; &,( Â&#x192;

/('

Optical assembly with monochromatic LED High Power BG12 98x1 W cool white ST BG11 98x1 W neutral white ST IP67

Â&#x192;

[ : 1HXWUDO

Q/ /$

Â&#x192; 635($' QDUURZ

7+52: LQWHUPHGLDWH 6/, ',1 .% &(1 * '

,PD[ FG

Cool white = 6000K Neutral white = 4000K

*The product can be suitable for operation at -40Â°C

& J Â&#x192; &,( Â&#x192;

/('

Optical assembly with monochromatic LED BE90 98x1 W cool white ST BE99 98x1 W neutral white ST IP67

Â&#x192;

[ : 1HXWUDO

Q/ /$

Â&#x192; 635($' QDUURZ

7+52: LQWHUPHGLDWH 6/, ',1 .% &(1 * '

,PD[ FG

Cool white = 6000K Neutral white = 4000K

*The product can be suitable for operation at -40Â°C

& J Â&#x192; &,( Â&#x192;

/('

Optical assembly with monochromatic LED BE01 84x1 W cool white ST BE96* 84x1 W neutral white ST IP67

Â&#x192;

[ : 1HXWUDO

Q/ /$

Â&#x192; 635($' QDUURZ

7+52: LQWHUPHGLDWH 6/, ',1 .% &(1 * '

,PD[ FG

Cool white = 6000K Neutral white = 4000K

*The product can be suitable for operation at -40Â°C

& J Â&#x192; &,( Â&#x192;

/('

Optical assembly with monochromatic LED BE89 81x1 W cool white ST BE98* 81x1 W neutral white ST

Q/ /$

Â&#x192; 635($' QDUURZ

7+52: LQWHUPHGLDWH 6/, ',1 .% &(1 * '

,PD[ FG

[ : 1HXWUDO

IP67

& J Â&#x192; &,( Â&#x192;

/('

Optical assembly with monochromatic LED BE00 59x1 W cool white ST BE95 59x1 W neutral white ST

684

Â&#x192; ,PD[ FG

Optical assembly with monochromatic LED BE88 55x1 W cool white ST BE97 55x1 W neutral white ST

Q/ /$

Â&#x192; 635($' QDUURZ

7+52: LQWHUPHGLDWH 6/, ',1 .% &(1 * '

/('

IP67

& J Â&#x192; &,( Â&#x192;

370

lamp

448

code

& J Â&#x192; &,( Â&#x192;

Q/ Q/

Â&#x192; /$

635($' QDUURZ 7+52: LQWHUPHGLDWH 6/, ',1 .% &(1 * '

Â&#x192;

Available on demand: â&#x20AC;˘ electronic DALI versions â&#x20AC;˘ versions with flux regulator â&#x20AC;˘ dual-operating versions â&#x20AC;˘ versions for ambient temperature up to -40Â°C â&#x20AC;˘ versions with twilight photocell (ON 70 lux, OFF 35 lux)

accessories code

code

Software BZ39

Interface USB BZ38

Available in colour 00

Available in colour 04

8700

8000

6700

6000

448

scale 1:100

448

All compositions illustrated can be obtained by combining the single elements presented in the tables.

2530

684

2080

ø76

All poles in tables are suitable for GB, D, F, CH and E markets.

ø76

ø60

1900

ø60

ø76

ø60 ø160

8000

ø160

6700

4000

310x95

300

fixing plate contropiastra

code 1506 1508

ø 60 147

lenght

colour

6000

code 1507

15 6000

1509

Codes against grey background are available on demand

ø 60 172

lenght

colour

code

1000 1000

440 50

200

1511 15 1566

ø 76 160

lenght

300 fixing plate contropiastra

colour

7500

code 1515

74 6700

L=500 ø 24

hole foro 153 øø153

fixing plate contropiastra

8000 8000

ø 100

310

800

50 300 fixing plate contropiastra

L=500 ø 18

foro hole ø 153

150 350

1000

L=500 ø 24

hole foro ø 153

150 350

hole foro 153 ø 153

ø172

100

L=500 ø 24

100

hole foro 153 ø 153

ø172

310x95

400x90

440

1000

800

L=500 ø 24

440

100

hole foro ø 153

ø147

100

L=500 ø 24

440

800

ø147

400x90

100

4000

6000

ø160

400x90

ø160

8700

1900

ø60

1570

ø 76 160

lenght

colour

9700 74 8700

Archilede

DIRECT LIGHTING SYSTEMS FOR URBAN AREAS

Registered Design

448 1560

684

ø76

ø160

The terminal box has four polarities with three ways for pole and is fitted for bridge wiring. It is equipped with two fuse holders for dim. 10,3x38 - 380 V - max 20A. Suitable for power cables with cross-section 16 mm2 on input and 2.5 mm2 on output to hook up with the light source. Made with class of insulation II.

code colour

1506-1507-1508 1509-1511-1515 0246 1566-1570-1585 1588-1909-1910

1863

door key

poles

support for UK terminal blocks

code

for curved conical poles for poles with arm

BZC2 B944

ø160

6700

ø160

terminal box code colour

ø160

8700

1900

4150

ø76

1900

ø76

448

1585 1909

76 160

lenght

code

for all poles

B943 lamp

BZC5 0000 BZC6

1x1 W LED blue 1x1 W LED neutral white

For curved conical poles (1506-1507-1508-1509)

300 contropiastra fixing plate

colour

7500

code 1588

74 6700

adapter for poles ø 102

100

440 50

200 contropiastra fixing plate

L=500 ø 24

hole foro ø 153

DIN guide for D and CH

code tip

150 350

1000 ø 100

1000

L=500 ø 18

310

150 350

800

hole foro ø 153

code

Pole-top application is possible on columns with end parts with ø 46 to 76 mm. Installation with adapter for poles with ø 102 mm.

310x95

1000

310x95

1910

Codes against grey background are available on demand

ø 76 160

lenght

colour

code

colour

9700 74 8700

Fixing plate with anchoring bolts

code 6134

1165 0453

poles

colour

1506-1507-1508 1509-1570-1910 1566-1909

Poles with plate are suitable for the F and E markets

Archilede iGuzzini

BE97

BE94 /X[ K P D Â&#x192;

/X[ K P D Â&#x192;

/(' [ :

BE98

BE95 /X[ K P D Â&#x192;

/X[ K P D Â&#x192;

/(' [ :

BE99

BE96 /X[ K P D Â&#x192;

/X[ K P D Â&#x192;

/(' [ :

BG11

/(' :

/(' [ :

/X[ K P D Â&#x192;

Archilede poles design iGuzzini

iGuzzini

• Available in buried versions (except for curved conical poles) and with plate. • Poles made of EN10025-S235JR steel, hot galvanized with 70 micron thickness in compliance with UNI EN ISO 1461 (EN40-5). • Powder paint surface treatment. • Curved conical shape with 70 mm final diameter ; cylindrical shape with 160 mm diameter. • 4 mm thickness for codes 1515/ 1570/1588/1910,3 mm thickness for codes 1511/1566/1585/1909/, 3 mm thickness for curved conical poles. • 150x50 mm slot for cable access. • 400x400m anchoring plate (280x280 for poles with code 1511/1566/1585/1909)made of hot galvanized steel with 70 micron thickness, with 4 slots. • Anchoring plate and bolts (to be ordered separately). • Flush inspection lid IP44 310x95 mm made of cast aluminium with seal gasket, flush IP30 400x90mm (for curved conical poles) made of steel. • Terminal block with single or double fuse-holder, 4 poles and 3 ways for pole; incoming cables with 16 mm2 section and outgoing cables with 2.5 mm2 section. • Suitable for Italian, French, Spanish, German, Swiss and British terminal blocks (with DIN bar and wooden adapter to be ordered separately). • Internal earthing system with stainless steel grounding lug and screw. • Versions complete with single or double arm, available with L=1400mm and L=2800 mm, respectively. S235JR steel arm with 76 mm diam. and 4 mm thickness. Subjected to powder paint treatment. • Arms fixed to pole with 4 M10 screws. • Terminal block: terminal block IP44 IK08 (1863).

Poles suitable for all European markets

Flush inspection lid

Plate with slot

Lavinia System design Massimiliano & Doriana Fuksas

iGuzzini

The product has been awarded the following prize: - ADI Design Index 2005

Lavinia is a coordinated system made up of fittings designed for low-traffic roads and residential areas. It permits a glare-free uniform distribution of the light on road and pedestrian surfaces as well as green areas. This is possible thanks to an innovative

No upward emission of light flow

Small body

Large body

LED version

articulated aiming system and great application flexibility due to a wide range of light sources and optics. No luminous flow is emitted upwards by the optical assembly in a horizontal position.

Lateral gallery for installation on columns with end part with Ă¸ 46 to 76 mm

W-Saving: autonomous light flow regulator

Height: 10000 mm Height: 9000 / 8000 mm Link roads, squares, avenues with intense traffic, crossroads. Height: 7000 / 6000 mm Squares, avenues and moderate traffic, crossroads.

scale 1:200

Lavinia System design Massimiliano & Doriana Fuksas

iGuzzini

The Lavinia System optimises light distribution and produces neither glare nor light dispersion in the sky, allowing for maximum energy saving and reducing the running costs of public lighting installations.

Urban and interurban roads characterised by high longitudinal uniformity values (min. Ul= 0.6) and mostly vehicular traffic. An example is represented by roads in ME3b lighting category.

Urban local roads with vehicular traffic and 50Km/h speed limit, in which the average maintained luminance is 0.75 cd/m2. They belong to the ME4b lighting category, with excellent longitudinal and general luminance uniformity values.

Four traditional light sources and the innovative street optic with LEDs deliver accurate functionality levels based on a uniform design, even in very different spaces.

101 W 84 LED cool white h (m)

L (m)

a (m)

33,5

0,4

0,6

70 W 59 LED cool white (road) h (m)

L (m)

a (m)

0,5

0,6

43 W 39 LED cool white (sidewalk) h (m)

L (m)

a (m)

Emed Emin

13,9lux 6 lux

43 W 39 LED cool white h (m)

L (m)

a (m)

0,75 0,4

0,6

Lavinia System design Massimiliano & Doriana Fuksas

Street Optic (ST) The street optic permits a larger centre-to-centre distance between the poles. This translates into low visual impact and a reduction in the number of fittings. Energy, purchase and maintenance costs are reduced in order for the lighting equipment to have better social impact.

iGuzzini

HST-DE 150 W Rx7s a

33,3

0,40

0,78

Lmed TI% 1,00

6,00

0,5 m 1 m

Uo UL 6,2 m

HST 70 W E27 a

27,2

0,40

0,67

Lmed TI% 1,01

6,00

0,5 m 1 m

Uo UL 3,6 m

Asymmetric Optic (A60째) Both visual comfort and uniformity are very good. It is ideal for the illumination of commercial centres, residential areas, historical town centres and wide surfaces. The asymmetrical beam - maximum intensity 60째 on the transversal plane - has good side emission.

HST-DE 250 W Fc2 a

ill. ab. L1xL2

Emax

Emed

10 m 25x25 m 55,7 lux 15,3 lux

a 30 m

L1 L2

HST-DE 150 W Rx7s h a

ill. ab. L1xL2

Emax

Emed

6 m 12x12 m 89,3 lux 35,6 lux

a 15 m

L1 L2

Uo= Average uniformity of zone examined UL= Longitudinal uniformity Lmed= Average luminance in cd/m2 h= Installation height a= Distance between poles TI= Physiological glare Emed = average lighting in the area Emax = max lighting in the area

The different combinations allow high flexibility and adaptability of the whole system.

The system is available in two different sizes for the floodlight.

The wall-mounted version with base is also available with arm L=400 mm.

The steel poles - buried or with anchoring plate - are protected by texturised powder acrylic paint.

The arms of the Lavinia System are available in several configurations single, double, triple versions.

Lavinia System design Massimiliano & Doriana Fuksas

iGuzzini

All individual arms in all sizes can be installed by a special flange in single or double composition.

sales order The commercial order should be completed based on the elements making up the system.

palo pole

testapalo/braccio pole-top/arm

vanoassembly ottico optical

palo pole

attacco laterale Lateral attachment

vanoassembly ottico optical

Columns with lateral gallery are presented on page 76-77-78

Lavinia System LED design Massimiliano & Doriana Fuksas

DIRECT LIGHTING SYSTEMS FOR URBAN AREAS WALL SYSTEMS FOR URBAN AREAS

iGuzzini

Adjustability ± 15°

Driver with self-learning

Replaceable LED unit

Replaceable driver unit and control gear

Spike protection

Twilight photocell (ON 70 lux OFF 35 lux) on demand

Versions with DALI electronics (for remote management of each single light point) available on demand.

PROTOCOL

Versions compatible with two dualoperating systems (electrical installations with pilot cable) available on demand.

Versions compatible with flux regulators available on demand.

Versions with electronics for Ta up to -40°C available on demand

100% 50%

• Direct lighting fixture for LED’s with road optic. • The fixture can be installed on a pole or wall-mounted. • Made up of optical assembly, pole, arm (single or double) and pole-top. • Optical assembly and frame made of die-cast aluminium subjected to chromatization, double primer, passivation at 120 °C , liquid paint, baking at 150°C, diffuser sealed with silicone to PMMA body with 3 mm thickness, 50 Shore black silicone gasket. • Slots frame for downflow of rainwater on frame. • Vertical orientation with graduated scale +15° / -15° in pole-top/arm installation; +5°/-20° in lateral installation • Optical assembly complete with decompression valve. • Monochromatic LED version with 39-59 (small body) and 84-98 (large body) power LED circuit, in Cool White (6000K) and Neutral White (4200K) colour temperature, optics with plastic lens. • LED average life at Ta 25°C: L70 >80000 h. • Electronics average life at Ta 25°C=100000 • Pull-out control gear and optical assembly with fast-coupling connectors for quick independent operation. • 220-240Vac 50/60 Hz built-in selv electronic ballast. • Driver with internal temperature automatic control system.

• Product operation at 100% for Room Temperature (RT) from -20°C to + 36°C, at higher RT values the system reduces the intensity of power supply current of the LEDs to allow for correct operation. • Version for -40°C RT on demand. • Driver with 4 predefined operation profiles selected with deep switches, possibility of personalised operation cycles with dedicated software that can be transferred via USB drive. • Protection system against mains spike up to 4Kv. • Terminal block with 4 A T fuse • Versions with twilight photocell (70 lux on-35 lux off). • Stainless-steel external screws. • Pole-top for diam. 102-120 mm and aluminium arms with flange for poles with diam. 102-120 mm. • Die-cast aluminium lateral attachment for tapered poles with diameter from 46 to 76 mm. •No light flow emission in upper hemisphere in horizontal position (in compliance with the strictest regulations against light pollution). • The technical characteristics of the fitting comply with EN60598-1 standard. • IP66 • ENEC approval • IMQ Performance • F seal • Class of Insulation II

Lavinia System LED design Massimiliano & Doriana Fuksas

DIRECT LIGHTING SYSTEMS FOR URBAN AREAS WALL SYSTEMS FOR URBAN AREAS

iGuzzini Registered Design Patent Pending

The products are suitable for operation at -20Â°C.

IP66

Cool white = 6000K Neutral white = 4000K

[ : 1HXWUDO

Â&#x192;

[ : 1HXWUDO

Q/ /$

Â&#x192; 635($' QDUURZ

7+52: LQWHUPHGLDWH 6/, ',1 .% &(1 * '

732

Â&#x192; ,PD[ FG

Optical assembly with monochromatic LED large body BF08 98x1 W cool white ST BF16 98x1 W neutral white ST Cool white = 6000K Neutral white = 4000K

& J Â&#x192; &,( Â&#x192;

Â&#x192;

/('

IP66

Q/ /$

Â&#x192; 635($' QDUURZ

7+52: LQWHUPHGLDWH ',1 .% &(1 * '

,PD[ FG

Optical assembly with monochromatic LED large body BF07 84x1 W cool white ST BF15 84x1 W neutral white ST Cool white = 6000K Neutral white = 4000K

& J Â&#x192; &,( Â&#x192;

Â&#x192;

/('

IP66

617

Â&#x192; ,PD[ FG

Optical assembly with monochromatic LED small body BD88 59x1 W cool white ST BF05 59x1 W neutral white ST Cool white = 6000K Neutral white = 4000K

Q/ /$

Â&#x192; 635($' QDUURZ

7+52: LQWHUPHGLDWH 6/, ',1 .% &(1 * '

/('

IP66

& J Â&#x192; &,( Â&#x192;

Â&#x192;

175

,PD[ FG

Optical assembly with monochromatic LED small body BD87 39x1 W cool white ST BF04 39x1 W neutral white ST

333

optic

215

lamp

406

code

[ : 1HXWUDO

& J Â&#x192; &,(

Q/ /$

Â&#x192;

Â&#x192; 635($' QDUURZ

7+52: LQWHUPHGLDWH 6/, ',1 .% &(1 * '

/('

Â&#x192;

accessories code

code

Software BZ39

Interface USB BZ38

Available in colour 00

Available in colour 04

BF05

BF04 /X[ K P D Â&#x192;

/X[ K P D Â&#x192;

/(' [ :

BF16

BF15 /X[ K P D Â&#x192;

/X[ K P D Â&#x192;

/(' [ :

Lavinia System design Massimiliano & Doriana Fuksas

DIRECT LIGHTING SYSTEMS FOR URBAN AREAS WALL SYSTEMS FOR URBAN AREAS

iGuzzini

Adjustability ± 15°

Hinge opening with two captive screws for small body

Removable plate

Decompression valve for small body

Groove allowing water to run off

The lamp holder is made of porcelain and it is secured with anodized aluminium supports. The lamp is equipped with an anti-loosening device. • When opening the optical assembly (for the small version) the decompression valve eliminates the internal depression. • Pull-out control gear plate made of galvanised steel; degreased with a natural finish. Spacers and captive screws for insulation class II; power supply with a non-explosive power factor correction capacitor, quick-connecting terminals. A disconnecting switch with fuse is available upon request. • There is no light dispersion into the upper hemisphere above this system in a horizontal position. • Can be wall-mounted in both the up light position and the down light position. • All screws are A2 stainless steel. • Aluminium pole-top and arms. • The technical characteristics of the fitting comply with EN60598-1 standard. • IP66 IK08 • F seal • ENEC approval • Class of Insulation II

Photo: Giuseppe Saluzzi

Two fixing screws Two safety bolts

• Direct lighting system, for use with metal halide and sodium discharge lamps. • The fixture can be installed on a pole or wall-mounted. • The Lavinia system has an optical assembly, mounting pole, arm (single or double), and pole top (with a single, double, or triple attachment). • The optical assembly (small or large) and frame are made of die-cast aluminium, with dual phosphoruschromium plating of the base metal, followed by passivation heat treatment at 120° C, grey painting, and curing at 150° C; the frame is secured with captive screws; tempered sodium-calcium sealing glass, thickness of 4 mm, oval and transparent. Internal retention cables made of galvanized steel with a 1.2 mm diameter, for the large version, and a hinge with stainless steel pin for the small version. 40 Shore grey silicone gasket placed between them. The reflector is made of 99,9% pure UNI 9001/2 H14 1/2 raw aluminium, subjected to an anodizing treatment. The frame has slots for rainwater drainage. Vertical orientation with a graduated scale of ± 15°. Fastening screws and lock washers. The reflector is secured with stainless steel screws.

fragola (Na) - Italy: Le Porte di Napoli Mall

Double tie rod for arm L=2200 mm

Lavinia System design Massimiliano & Doriana Fuksas

DIRECT LIGHTING SYSTEMS FOR URBAN AREAS WALL SYSTEMS FOR URBAN AREAS

iGuzzini Registered Design Patent Pending

optic ,PD[ FG .OP

ST ST ST ST ST ST ST

& J Â&#x192; &,( Â&#x192;

Â&#x192;

Â&#x192; 635($' QDUURZ 7+52: VKRUW &(1 * ' ',1 .%

+,7 '( 5[ V

& J Â&#x192; &,( Â&#x192;

Â&#x192;

Q/ Q/

Â&#x192; /$

635($' QDUURZ 7+52: VKRUW 6/, ',1 .% &(1 * '

ST ST :

IP66 IK08

+67 (

On request available with electronic power supply (only HIT-DE)

617

Â&#x192; ,PD[ FG .OP

Q/ /$

175

lamp

Small body floodlight B413 70 W HIT-DE 70 W HST-DE B414 70 W HST 70 W HIT (CDO-TT) B415* 150 W HIT-DE 150 W HST-DE B416 250 W HIT (CDM-T) Small body floodlight with electronic power supply B419 60 W HST (CPO-TW) B420 140 W HST (CPO-TW)

333

code

Â&#x192; ,PD[ FG .OP & J Â&#x192; &,(

Â&#x192;

Q/ /$

Â&#x192; 635($' QDUURZ 7+52: VKRUW 6/, ',1 .% &(1 * '

&32 7: 3*=

Â&#x192; ,PD[ FG .OP & J Â&#x192; &,(

Â&#x192;

7+52: VKRUW 6/, ',1 .% &(1 * '

&32 7: 3*=

Â&#x192; ,PD[ FG .OP

& J Â&#x192; &,( Â&#x192;

Â&#x192;

Â&#x192; ,PD[ FG .OP

& J Â&#x192; &,( Â&#x192;

Â&#x192;

Â&#x192; ,PD[ FG .OP

A A A A A A A

Q/ /$

Â&#x192; 635($' QDUURZ 7+52: VKRUW 6/, &(1 * '

+,7 &'0 7 *

Small body floodlight B425 70 W HIT-DE 70 W HST-DE B426 70 W HST 70 W HIT (CDO-TT) B427 150 W HIT-DE 150 W HST-DE B428 250 W HIT (CDM-T) Small body floodlight with electronic power supply B431 60 W HST (CPO-TW) B432 140 W HST (CPO-TW)

Q/ /$

Â&#x192; 635($' QDUURZ 7+52: VKRUW 6/, ',1 .% &(1 * '

+,7 '( 5[ V

Q/ /$

Â&#x192; 635($' QDUURZ

,PD[ FG .OP

& J Â&#x192; Â&#x192;

Â&#x192;

Â&#x192; D

+,7 &'2 77 ( D Â&#x192;

Â&#x192; Â&#x192;

,PD[ FG .OP & J Â&#x192; Â&#x192;

Â&#x192;

,PD[ FG .OP

Â&#x192;

& J Â&#x192; Â&#x192;

Â&#x192;

A A

IP66 IK08

Â&#x192;

: +67 '( 5[ V

& J Â&#x192; Â&#x192;

Â&#x192;

Â&#x192; &32 7: 3*=

On request available with electronic power supply (only HIT-DE)

Â&#x192;

Â&#x192; Â&#x192;

&32 7: 3*=

,PD[ FG .OP

& J Â&#x192; Â&#x192;

Â&#x192;

'XPP\ Â&#x192;

,PD[ FG .OP

Â&#x192;

Â&#x192; +,7 '( 5[ V

& J Â&#x192; Â&#x192;

Â&#x192;

Â&#x192; Â&#x192;

Â&#x192; +,7 &'0 7 *

Â&#x192; Â&#x192;

Lavinia System design Massimiliano & Doriana Fuksas

DIRECT LIGHTING SYSTEMS FOR URBAN AREAS WALL SYSTEMS FOR URBAN AREAS

iGuzzini Registered Design Patent Pending

optic ,PD[ FG .OP & J Â&#x192; &,(

ST ST ST ST

IP66 IK08

Â&#x192;

7+52: VKRUW 6/, ',1 .% &(1 * '

Â&#x192; ,PD[ FG .OP

Â&#x192; & J Â&#x192; &,( Â&#x192;

Â&#x192;

Â&#x192; ,PD[ FG .OP

Q/ /$

Â&#x192; 635($' QDUURZ 7+52: VKRUW 6/, ',1 .% &(1 * '

+,7 (

Q/ /$

Â&#x192; 635($' QDUURZ 7+52: VKRUW 6/, ',1 .% &(1 * '

,PD[ FG .OP

IP66 IK08

Large body floodlight B215 400 W HIT (Philips)

& J Â&#x192; &,( Â&#x192;

Â&#x192;

+67 (

Large body floodlight B213 250 W HIT (Osram-BLV) ST B214 250 W HST ST

Â&#x192; 635($' QDUURZ

+,7 &'2 77 (

Q/ /$

& J Â&#x192; &,( Â&#x192;

Â&#x192;

Q/ /$

Â&#x192; 635($' QDUURZ 7+52: VKRUW 6/, ',1 .% &(1 * '

IP66 IK08 :

+,7 (

Large body floodlight B217 250 W 250 W

Â&#x192; ,PD[ FG .OP

HIT-DE HST-DE

& J Â&#x192; Â&#x192;

Â&#x192;

A A

Â&#x192;

IP66 IK08 :

Â&#x192; +,7 '( )F

Large body floodlight B218 400 W

Â&#x192; Â&#x192;

HIT-DE

IP66 IK08

215

lamp

Large body floodlight B411 100 W HST 100 W HIT (CDO-TT) B412 150 W HST 150 W HIT (CDO-TT)

732

406

code

Lavinia System design Massimiliano & Doriana Fuksas

DIRECT LIGHTING SYSTEMS FOR URBAN AREAS WALL SYSTEMS FOR URBAN AREAS

iGuzzini

B414

B413 /X[ K P D Â&#x192;

/X[ K P D Â&#x192;

+,7 '( 5[ V :

+67 ( :

B415

B420 /X[ K P D Â&#x192;

/X[ K P D Â&#x192;

&32 7: 3*= :

+,7 '( 5[ V :

B419

B416 /X[ K P D Â&#x192;

/X[ K P D Â&#x192;

+,7 &'0 7 * :

&32 7: 3*= :

B426

B425 /X[ K P D Â&#x192;

/X[ K P D Â&#x192;

+67 '( 5[ V :

+67 ( :

B431

B432 /X[ K P D Â&#x192;

/X[ K P D Â&#x192;

&32 7: 3*= :

B428

B427 Lux h=8 m. Îą =0Â°

/X[ K P D Â&#x192;

+,7 ( :

44 36 31 27 24 21

7.5

HIT CDM-T G12 250W

-1.5

1.5

4.5

10.5

13.5 m

Lavinia System design Massimiliano & Doriana Fuksas

DIRECT LIGHTING SYSTEMS FOR URBAN AREAS WALL SYSTEMS FOR URBAN AREAS

iGuzzini

B412

B411 /X[ K P D Â&#x192;

/X[ K P D Â&#x192;

+,7 &'2 77 ( :

+67 ( :

B215

B213-B214 /X[ K P D Â&#x192;

/X[ K P D Â&#x192;

+,7 ( :

B218

B217 /X[ K P D Â&#x192;

/X[ K P D Â&#x192;

+,7 '( )F :

Lavinia System poles iGuzzini

• Flush 310x95mm access cover (for poles codes 1545-1546-15471548-1552-1554-1597-1598-1599) or external 186x45 mm access cover (for poles codes 1542-1543-1544). The access covers are made with cast aluminium and equipped with watertight gasket. • 4-pole terminal block with three connections for each pole and single or double integrated fuse; designed for 16mm2 feed cables and 2,5 mm2 exit cables. • The h=9/10/12 m poles and 6/7/8 m poles with plate are suitable for terminal blocks that are Italian/ French/Spanish, and English (with wood adapter that can be ordered separately), and German/Swiss (with DIN guide that can be ordered separately). • Internal grounding system (for h=9/10/12 m poles) or external grounding system (for h=6/7/8 m poles) with grounding lug, steel insert, and stainless steel screw. • Access cover: IP44 (for h=9/10/12 m poles and 6/7/8 m poles with plate), IP54 IK10 (for h=6/7/8 m poles). • Terminal block: IP44 IK08 (for h=9/10/12 m poles), IP43 IK08 (for h=6/7/8 m poles).

Flush inspection lid IP44 suitable for terminal boards UK - F - CH - E

Plate with slot

Photo: Giuseppe Saluzzi

• Supplied in versions with a baseplate and for cementing directly into the ground. 6 m, 7 m, 8 m, 9 m, 10 m and 12 m models available. • Made of EN10025-S235JR (codes 1542-1543-1597-1598-1599) or EN10025-S355JR (codes 15441545-1546-1547-1548-1552-1554), 70 micron hot galvanized steel as UNI EN ISO 1461 (EN 40-5) standards. • Powder-coating paint surface finish. • The pole has a cylindrical crosssection with a 102mm diameter (cod.1542-1543); it is either formed with two cylindrical joints with 127mm and 102mm cross sections, (code 1544) welded together or it is formed with two cylindrical joints with 194mm and 120mm cross sections,(codes 1545-1546-15471548-1552-1554) welded together. • The upper portion of the pole has four perforations designed to feed power cables and stainless steel inserts to secure the tie rods. • 3-4 mm thick. • Cable access slot 150x50 mm. • Anchoring plate is made of 70 micron hot galvanized steel, and has 4 slots. • Anchor bolts and plate (to be ordered separately).

Naples - Italy: Marco Mascagna Park

design Massimiliano & Doriana Fuksas

Protruding inspection lid IP54

10000

9000 / 8000

7000 / 6000

All compositions illustrated here can be obtained by combining the single elements presented in the tables.

333

333 670

333

scale 1:100 scala 1:100

670

5660

1507

The arms can be installed on iGuzzini poles only

code ø 102

L=1500 mm

colour

code ø 102

B437

colour

code ø 102

B438

code ø 120

B441

L=1800mm

colour

B439

code ø 120

B440

L=400 mm

L=2200 mm arm for wall luminaire

single arm

L=900 mm

code

colour ø102

ø102

B449

B442 L=4400mm 6000

L=3000mm

code ø 120

B445 15

code ø 120

B446

code ø 120

B447

B448

310x95

L=500 ø 24

hole foro ø ø 151 151

440

B444

colour

100

code ø 102

1000

B443

colour

350

code ø 102

150

colour

2000 1000

186x45

code ø 102

1000

double arm

ø159

300 fixing plate contropiastra

colour code

BZG3

BZG5

BZG4

BZG6

colour code

colour

B452* 102 15 B450

102

15 B451

120

B221

colour

code

colour

lateral attachment

code

colour

120

15 B460

code

length

1542 102

6800

102 1597 159

6000

colour 15

code

colour

poles

1165

1597

102 B223

102

code

BZC8* 46÷76 15

102 120

120

Protruding pole tops can be used with existing poles ø 102/120 mm *To be used with terminal block code 1865

B459

15 B222

B220

code

wall attachment

* for poles with ending part with diam. from 46 to 76 mm presented on page 76 (Archilede)

size

colour poles 184

intermediate flange

1842

1597

04 1598

ø 620

1599

ø 620

1547 1548 1554

184

code

triple

fixing platewith anchoring bolts

double

base for pole

protruding pole-top

single

1843

Lavinia System design Massimiliano & Doriana Fuksas

DIRECT LIGHTING SYSTEMS FOR URBAN AREAS WALL SYSTEMS FOR URBAN AREAS

iGuzzini

333

2918

670

2144 ø120

406 1461 ø102

ø120

ø102

10000

12000

ø102

ø194

ø159

ø194

5200

7000

8000

9000

ø102

ø120

code

colour

poles

1165

1598

terminal box

poles

1165

1599

accessories for European poles colour h pole

B943* B972**

9000 10000 9000 10000

code

colour

10000

600

150

code

colour

poles

1165

1547

code

colour

poles

1165

1548

W-Saving ø pole 230 V 220 V

BG43+ BZC1 + BG43+ 159 BG42 BZG0 BZG0 + HST-DE 150/250 194 BG42 BZG1

127

HST

70/100

1552 120 1554 194

15 10000

code

lamp

100

440 300

fixing plate contropiastra

11000

1546 120 1548 194

15 9000

DIN guide for D and CH Marine grade plywood support for terminal board for GB

300

length

L=650 ø 24

hole foro øø188 188

contropiastra fixing plate

The poles featured in the tables are suitable for fixing on I, F and E. For other countries, add the specific fixing systems featured in the table.

* **

800

600

1000 50

300

length

L=500 ø 24

hole foro øø188 188

440

150

350

1000 100

1000

1000 440

150

350

1545 120 1547 194

15 8000 colour

code poles colour code colour 1862 1542-1543-1544 0227 1865 1597-1598-1599 00 00 1545-1547-1546 1863 0246 1865 1548-1552-1554 1597-1598-1599

3200

3200 1000

100

9000

code

door key

code

colour

400x90

fixing platewith anchoring bolts

7000

length

102 1544 127 102 1599 159

310x95

fixing plate contropiastra

fixing platewith anchoring bolts

8000

300

fixing platewith anchoring bolts

1543 102 102 1598 159

code

colour

GB D - CH

length

L=500 ø 24

hole foro ø ø188 188

fixing plate contropiastra

fixing platewith anchoring bolts

1000

350 50

300 fixing plate contropiastra

code

L=500 ø 24

hole foro ø 151 151

440

100

440 50

310x95

1000

310x95

1000

186x45

150

L=500 ø 24

hole foro ø ø 151 151

1000

1000 350

150

1000

310x95

2000 1000

186x45

3000

ø159

length

colour

12800 04-15 12000

code

colour

poles

1164

1554

W-Saving: nominal max power up to 250 W. The components that are necessary for the operation of the fittings must be ordered separately. They are presented on page 262.

Delphi Installation with double arm

Argo Installation with double pole-top

Delphi Installation with pole-top

Cut-Off System design iGuzzini

iGuzzini

Argo span-wire installation

Argo Installation with arm

A lighting system for urban areas with last generation technology introduces a new dimension for the Delphi version. Cut-Off Systemwith small body, for wall or pole-mounted installation, has been studied to satisfy the most demanding lighting requirements. Available in Delphi and Argo version, with parallelepiped and hemispherical body, respectively, it can be installed

Bi-Energy power supply

Simplified ordinary and extraordinary maintenance

Louvre for reduction of stray light in front and back

in pole-top version or with two different types of arm. The large range of high-performing optics, the Bi-Energy innovative technology for adjustment of the light flux and the numerous benefits of the luminaire ensure perfect integration in multiple settings, while guaranteeing very high energy saving and good visual comfort.

W-Saving: automatic flow regulator

Lateral gallery for installation on columns with end part with Ă¸ 46 to 76 mm

Argo Installation with intermediate flange

Height:: 12000 mm

Height:: 10000 mm Height:: 9000 mm Height:: 8000 mm Height:: 7000 mm

Height:: 5000 mm

scale 1:200

Cut-Off System LED iGuzzini

Urban and interurban roads characterised by high longitudinal uniformity values (min. Ul= 0.6) and mostly vehicular traffic. An example is represented by roads in ME3b lighting category.

Urban neighbourhood and urban interneighbourhood roads They are characterised by longitudinal uniformity values from 0.5 to 0.6 and mainly vehicular traffic. The example considers a street in ME3c lighting class (illuminated with Argo spanwire installation 48LED) in a town centre where lighting poles cannot be used, thus imposing the use of suspended fittings.

101 W 84 LED cool white h (m)

L (m)

a (m)

33,5

0,4

0,6

70 W 59 LED cool white (road) h (m)

L (m)

a (m)

0,5

0,6

43 W 39 LED cool white (sidewalk) h (m)

L (m)

a (m)

Emed Emin

13,9lux 6 lux

43 W 39 LED cool white h (m)

L (m)

a (m)

0,75 0,4

0,6

60 W 48 LED cool white h (m)

L (m)

a (m)

h= Installation height L= Road width Nc= Number of lanes Na= Number of luminaires a= Distance between poles Lm= Average luminance in cd/m2 Em= Average lighting in lx Uo= Average uniformity Ul= Longitudinal uniformity

0,46 0,64

Cut-Off System iGuzzini

Road Optic (ST) Allows for greater centre-to-centre distance between the poles in compliance with the lighting requirements for motor traffic.

HST 70 W E27 a

Lmed TI%

22,2

0,40

0,56

1,10

1500 0,5 m 1 m

HST 250 W E40 Uo

Lmed TI%

0,40

0,66

10 m 37,00

Multi-position Street Optic (ST) The symmetrical optics are the very best solution for the illumination of large outdoor spaces in compliance with applicable regulations.

1,48

0,18

CPO-TW 60 W PGZ12 a

0,5 m 1 m

Lmed TI%

0,40

0,68

Wide road 6,5 m (position 5)

h Uo

CPO-TW 60 W PGZ12

0,43

0,5

Lmed TI% 1

Narrow road 4,5m (position 3) Cycle lane Optic (C) Ideal for lighting bicycle paths and walkways. This optic ensures elevated average lighting values and therefore contributes to bicycle and pedestrian safety. This reflector allows for an elevated spacing between poles, thus obtaining improved energy savings all the while guaranteeing elevated average lighting values in compliance with class S1 of the EN 13201-2 norm.

Asymmetrical Optic 60째 (A) It is ideal for the illumination of malls, historical town centres, and residential areas. The optic with asymmetric light beam and 60째 maximum opening with respect to the vertical axis ensures very high emission also on the longitudinal plane.

HST-DE 70 W Rx7s a

h 5m

ill. ab. L1xL2

Emed

Emin

3x30m 14,7 lux 5,1 lux

a 30m

HIT-DE 70 W Rx7s a

ill. ab. L1xL2

Emax

Emed

6 m 12x13 m 23,4 lux 11,4 lux

a 15 m

HIT-DE 150 W Rx7s

ill. ab. L1xL2

Emax

Emed

8 m 16x18 m 27 lux

12,7 lux

21 m

HIT 250 W E40

ill. ab. L1xL2

Emax

Emed

10 m 12x20 m 27 lux

18 lux

20 m

Uo= Average uniformity of zone examined UL= Longitudinal uniformity Lmed= Average luminance in cd/m2 h= Installation height a= Distance between poles TI= Physiological glare Emed = verage lighting in the area Emax = max lighting in the area

Compositions for pole-top Cut-Off System can be installed in pole-top position in poles with different heights (from 3500 to 8000 mm) and diameters (60, 76, 102 mm), in individual, double or triple version, with possible insertion of an intermediate flange and wall-mounting installation.

Argo small body

Delphi small body

Delphi large body

The commercial order should be completed based on the elements making up the system.

pole palo

palo pole

pole-top testapalo

attacco laterale Lateral attachment

optical vano assembly ottico

vanoassembly ottico optical

The pole is available in two versions, with fixing plate or for burying. Columns with lateral gallery are presented on page 76-77-78

100

Cut-Off System design iGuzzini

iGuzzini

Compositions for arms The arms can be installed in pair or invidually with flange.

Installed with screw coupling, the arm can be mounted in double configuration by purchasing two individual arms.

Tilted arms with tie rod can only be used with Argo and Delphi small body.

palo pole

flangia flange

braccio arm

vanoassembly ottico optical

The pole is available in two versions, with fixing plate or for burying. Two arms without flange must be ordered for double compositions.

101

Cut-Off System LED design iGuzzini

DIRECT LIGHTING SYSTEMS FOR URBAN AREAS WALL SYSTEMS FOR URBAN AREAS

iGuzzini

Adjustability +15°, -5°

Self learning driver

Replaceable LED unit

Replaceable driver and ballast assembly

Spike protection

Twilight photocell (ON 70 lux OFF 35 lux) on demand

Versions with DALI electronics (for remote management of each single light point) available on demand.

PROTOCOL

Versions compatible with two dual-operating systems (electrical installations with pilot cable) available on demand.

Versions compatible with flux regulators available on demand.

Versions with electronics for Ta up to -40°C available on demand.

102

100% 50%

• Direct lighting fixture for LED’s with road optic. • The fixture can be installed on a pole or wall-mounted. • Made up of optical assembly, pole, arm (single or double) and pole-top. • Optical assembly and lid made of die-cast aluminium, with parallelepiped (Delphi) or hemispherical (Argo) shape, subjected to phosphochromatization, double primer, passivation at 120°C , liquid (texturized black) paint, baking at 150°C; opening with clips without tools, hinged lid with automatic retention system. Diffuser sealed with silicone to PMMA body with 3mm thickness; 50 Shore black silicone seal. • Optical assembly complete with decompression valve. • Vertical orientation with graduated scale +15° / -5° in pole-top/arm installation; +5°/-20° in lateral installation • Monochromatic LED with 39-59 (small body) and 84-98 (Delphi large body) power LED circuit, in Cool White (6000K) and Neutral White (4200K) colour temperature, optics with plastic lens. • LED average life at Ta 25°C: L70 >90000 h. • Electronics average life at Ta 25°C=100000 h • Pull-out control gear and optical assembly with fast-coupling connectors for quick independent operation. • 220-240Vac 50/60 Hz built-in selv electronic ballast. • Driver with internal temperature automatic control system.

• Product operation at 100% for Room Temperature (RT) from -20°C to + 36°C, at higher RT values the system reduces the intensity of power supply current of the LEDs to allow for correct operation. • Version for -40°C RT on demand. • Driver with 4 predefined operation profiles selected with deep switches, possibility of personalised operation cycles with dedicated software that can be transferred via USB drive. • Protection system against mains spike up to 4Kv. • Terminal block with 4 A T fuse • Versions with twilight photocell (70 lux on-35 lux off). • Stainless-steel external screws. • Hot galvanized steel arms subjected to acrylic liquid paint treatment. • Die-cast aluminium pole-top with single and double attachment for ø 60 - 76 - 102 - 120 mm poles, triple for ø 102 mm poles. • Die-cast aluminium lateral attachment for tapered poles with diameter from 46 to 76mm. •No light flow emission in upper hemisphere in horizontal position (in compliance with the strictest regulations against light pollution). • The technical characteristics of the fitting comply with EN60598-1 standard. • IP66 • F seal • ENEC approval • IMQ Performance • Class of Insulation II

Cut-Off System Delphi design iGuzzini

Patent Pending

Small optical assembly with monochromatic LED BD91 39x1 W cool white BF00 39x1 W neutral white IP66

The products are suitable for operation at -20Â°C. ,PD[ FG Â&#x192;

[ : 1HXWUDO

/('

IP66

Â&#x192; ,PD[ FG Â&#x192;

[ : 1HXWUDO

Large optical assembly with monochromatic LED BF11 84x1 W cool white BF17 84x1 W neutral white IP66

Â&#x192;

& J Â&#x192; &,( Â&#x192;

Â&#x192;

,PD[ FG Â&#x192;

[ : 1HXWUDO /('

451

& J Â&#x192; &,( Â&#x192;

Q/ /$

Â&#x192; 635($' QDUURZ

7+52: LQWHUPHGLDWH 6/, ',1 .% &(1 * '

ST ST

Cool white = 6000K Neutral white = 4000K

Q/ /$

Â&#x192; 635($' QDUURZ

7+52: LQWHUPHGLDWH 6/, ',1 .% &(1 * '

/('

IP66

7+52: LQWHUPHGLDWH ',1 .% &(1 * '

ST ST [ : 1HXWUDO

Q/ /$

Â&#x192; 635($' QDUURZ

Â&#x192; ,PD[ FG

Cool white = 6000K Neutral white = 4000K

Large optical assembly with monochromatic LED BF12 98x1 W cool white BF18 98x1 W neutral white

Â&#x192;

/('

330

& J Â&#x192; &,(

ST ST

Cool white = 6000K Neutral white = 4000K

Q/ /$

Â&#x192; 635($' QDUURZ

7+52: LQWHUPHGLDWH 6/, ',1 .% &(1 * '

ST ST

Cool white = 6000K Neutral white = 4000K

Small optical assembly with monochromatic LED BD92 59x1 W cool white BF01 59x1 W neutral white

& J Â&#x192; &,( Â&#x192;

145

optic

330

lamp

180

code

451

DIRECT LIGHTING SYSTEMS FOR URBAN AREAS WALL SYSTEMS FOR URBAN AREAS

iGuzzini

Â&#x192;

accessories code

code

Polycarbonate screen IK10 BZ41 for BD91-BD92-BF00-BF01

Software BZ39 Available in colour 00

Available in colour 24

Interface USB BZ38 Available in colour 04

103

Cut-Off System Argo design iGuzzini

Patent Pending

code

lamp

optic

The products are suitable for operation at -20Â°C. ,PD[ FG

Optical assembly with monochromatic LED BD95 39x1 W cool white ST BF02 39x1 W neutral white ST IP66

Â&#x192;

/('

Â&#x192; ,PD[ FG

Optical assembly with monochromatic LED BD96 59x1 W cool white ST BF03 59x1 W neutral white ST

Â&#x192;

& J Â&#x192; &,( Â&#x192;

/('

Ă¸ 369

Q/ /$

Â&#x192; 635($' QDUURZ

7+52: LQWHUPHGLDWH ',1 .% &(1 * '

Cool white = 6000K Neutral white = 4000K [ : 1HXWUDO

Q/ /$

Â&#x192; 635($' QDUURZ

7+52: LQWHUPHGLDWH 6/, ',1 .% &(1 * '

Cool white = 6000K Neutral white = 4000K [ : 1HXWUDO

IP66

& J Â&#x192; &,( Â&#x192;

244,5

DIRECT LIGHTING SYSTEMS FOR URBAN AREAS WALL SYSTEMS FOR URBAN AREAS

iGuzzini

Â&#x192;

accessories code

code

Polycarbonate screen IK10 BZ43

Software BZ39

Available in colour 24

Available in colour 00

Interface USB BZ38 Available in colour 04

104

Cut-Off System LED design iGuzzini

DIRECT LIGHTING SYSTEMS FOR URBAN AREAS WALL SYSTEMS FOR URBAN AREAS

iGuzzini

BF00-BF58

BF01-BF59

/X[ K P D

/(' [ :

BF17-BF75

BF18-BF76

/X[ K P D

/(' [ :

BF03-BF61

BF02-BF60 /X[ K P D

/X[ K P D

/(' [ :

105

Cut-Off System design iGuzzini

DIRECT LIGHTING SYSTEMS FOR URBAN AREAS WALL SYSTEMS FOR URBAN AREAS

iGuzzini

Adjustability + 15°, -5°

Tool-free optical assembly opening

Automatic door lock

Component-holding plate pulled out with no tools

Disconnecting switch

Fuses on request

Decompression valve

Twilight photocell on request

Louver for reduction of stray light in front and back

Power supply Bi-Energy on request

106

• Direct lighting system, for use with metal halide, sodium discharge and fluorescent (mains voltage) lamps. • Fixture can be installed on a pole or wall-mounted. • Fitting has an optical assembly, pole, arm (single or double) and pole-top. • Optical assembly and lid made of die-cast aluminium, with parallelepiped shape in two sizes (Delphi) or hemispherical shape (Argo) treated with phosphochromatizing process, double primer and passivation at 120° C, grey (texturized black), liquid painting, baking at 150° C; opening with clips without tools, hinged lid with automatic retention system. Hardened sodiumcalcium transparent protection glass with 5 mm thickness; 50 Shore black silicone gasket; polished anodized reflector made of 99.93% superpure aluminium fixed with stainless steel springs and removed without tools for relamping; porcelain lamp-holder with anti-loosening device of the lamp (E27/E40), fixed with anodized aluminium supports. • Vertical orientation by +15°, -5° with graduated scale. • Control gear pulled out without tools, with fast-coupling connectors, anti-explosion capacitor and spacers for class II, component-plate made of natural aluminium subjected to degreasing process. • Disconnecting switch.

• Fuse-holder and twilight photocell on request. • Optical assembly complete with decompression valve for easy opening by eliminating negative pressure inside. • There is no light dispersion into the upper hemisphere above this luminaire. • All external screws are stainless steel. • Bi-energy HST (electromagnetic control gear) version. • Hot-galvanised steel arms subjected to acrylic liquid paint, installation with flange ø102 mm or with screws, 120 mm or with screws with 900, 1500 mm length. • Die-cast aluminium pole-top with single and double attachment for poles ø 60, 76, 102,120 mm and triple ø 102, 120 mm. • Intermediate installation with lange ø 102,120 mm. • Adjustability of wall-mounted luminaire by +15°, -5°. • The technical characteristics of the fitting comply with EN60598-1 standard. • IP66 IK09 (small body) IK07 (large body) IK10 (with accessory) • F seal • ENEC approval • Class of Insulation II

Cut-Off System Delphi design iGuzzini

DIRECT LIGHTING SYSTEMS FOR URBAN AREAS WALL SYSTEMS FOR URBAN AREAS

iGuzzini 03

All Delphi versions can be ordered with twilight photocell (ON: 70 lux; OFF: 35 lux) lamp

Small optical assembly with electromagnetic control gear BD85 50 W HST 50 W HIT (CDO-TT) BC57 70 W HST 70 W HIT (CDO-TT) BC58 100 W HST 100 W HIT (CDO-TT) BC60 150 W HIT-DE 150 W HST-DE BC61* 100 W HST (Bi-Energy) BC63* 150 W HST-DE (Bi-Energy) Small optical assembly with electronic control gear BC56 35 W HIT BC59 140 W HIT (CPO-TW) BC62* 60 W HIT (CPO-TW) BC71* 70 W HST 70 W HIT (CDO-TT) BC72* 100 W HST 100 W HIT (CDO-TT) BC75* 150 W HIT-DE BC76* 150 W HST-DE

optic ,PD[ FG .OP Â&#x192;

& J Â&#x192; &,( Â&#x192;

+67 (

330

Â&#x192; ,PD[ FG .OP

Â&#x192;

& J Â&#x192; &,( Â&#x192;

ST ST ST ST

+67 '( 5[ V

Â&#x192; ,PD[ FG .OP Â&#x192;

& J Â&#x192; &,( Â&#x192;

+,7 &'0 7 *

Â&#x192; ,PD[ FG .OP FG .OP

IP66 IK09

Â&#x192;

& & J Â&#x192; Â&#x192; &,( Â&#x192;

&32 7: +,7 &'0 7 * 3*=

Small optical assembly with electromagnetic control gear BC65 70 W HIT-DE 70 W HST-DE BC66 150 W HIT-DE 150 W HST-DE BC68* 150 W HST-DE (Bi-Energy) Small optical assembly with electronic control gear BC67 140 W HIT(CPO-TW) BC69* 60 W HIT(CPO-TW) BC78* 150 W HIT-DE BC79* 150 W HST-DE

Â&#x192; ,PD[ FG .OP Â&#x192;

& J Â&#x192; &,( Â&#x192;

+67 '( 5[ V

Â&#x192; ,PD[ FG .OP

A A A A

Â&#x192;

IP66 IK09

/$ 635($' EURDG

Â&#x192; 7+52: VKRUW 6/, ',1 .% &(1 * '

A A

Q/ Q/ Q/ Q/

Â&#x192; /$

635($' QDUURZ 7+52: VKRUW ORQJ 6/, ',1 .% .% &(1 * * '

* Versions available on demand : :

Q/ Q/

Â&#x192; /$

635($' QDUURZ 7+52: ORQJ 6/, ',1 .% &(1 * '

ST ST ST

Q/ Q/

Â&#x192; /$

635($' QDUURZ 7+52: VKRUW 6/, ',1 .% &(1 * '

ST ST :

Â&#x192; /$

635($' QDUURZ 7+52: VKRUW 6/, ',1 .% &(1 * '

ST ST

Q/ Q/

145

code

330

& J Â&#x192; &,( Â&#x192;

6/, ',1 .% &(1 * '

&32 7: 3*=

/$ 635($' QDUURZ

Â&#x192; 7+52: VKRUW

Â&#x192;

* Versions available on demand Small optical assembly with electronic control gear BC70 33 W TC-TEL

,PD[ FG .OP Â&#x192;

* Versions available on demand

IP66 IK09

7& 76( (

/$ 635($' QDUURZ

Â&#x192; 7+52: VKRUW 6/, ',1 .% &(1 * '

IP66 IK09

Small optical assembly with electromagnetic control gear BC64 70 W HIT-DE 70 W HST-DE

& &,( Â&#x192;

Â&#x192; ,PD[ FG .OP & J Â&#x192; &,( Â&#x192;

Â&#x192;

635($' QDUURZ 7+52: VKRUW 6/, ',1 .% &(1 * '

C : +,7 '( 5[ V

Q/ Q/

Â&#x192; /$

Â&#x192;

* Versions available on demand

107

Cut-Off System design iGuzzini

DIRECT LIGHTING SYSTEMS FOR URBAN AREAS WALL SYSTEMS FOR URBAN AREAS

Delphi iGuzzini

All Delphi versions can be ordered with twilight photocell (ON: 70 lux; OFF: 35 lux) optic ,PD[ FG .OP Â&#x192;

& J Â&#x192; &,( Â&#x192;

+67 (

Â&#x192; /$

635($' QDUURZ 7+52: VKRUW 6/, ',1 .% &(1 * '

ST ST

Q/ Q/

Â&#x192;

451 ,PD[ FG .OP

ST ST

Â&#x192;

IP66 IK07 :

* Versions available on demand

Q/ /$ Â&#x192; 635($' QDUURZ 7+52: VKRUW 6/, ',1 .% &(1 * '

Â&#x192;

& J Â&#x192; &,( Â&#x192;

+67 (

,PD[ FG .OP

& J Â&#x192; &,( Â&#x192;

Q/ Q/

Â&#x192; /$

635($' QDUURZ 7+52: VKRUW 6/, ',1 .% &(1 * '

Â&#x192;

Large optical assembly with electromagnetic control gear BF23 150 W HST 150 W HIT (CDO-TT) BF24 250 W HST 250 W HIT (CDO-TT) BF26 150 W HST (Bi-Energy) BF81* 400 W HST Large optical assembly with electronic control gear BF25 315 W HIT(CDM-T Elite) BF80* 140 W HIT(CPO-TW) IP66 IK07

,PD[ FG .OP Â&#x192;

& J Â&#x192; &,( Â&#x192;

A :

+67 (

/$ 635($' EURDG

Â&#x192; 7+52: LQWHUPHGLDWH 6/, ',1 .% &(1 * '

Â&#x192;

A ,PD[ FG .OP Â&#x192;

& J Â&#x192; &,( Â&#x192;

Â&#x192; 8*5

',1 $ 87( ( 7 ) ) ) ) ) ) &,%6( %= %=

A A

+67 (

Â&#x192;

* Versions available on demand ,PD[ FG .OP Â&#x192;

& J Â&#x192; &,( Â&#x192;

code

Polycarbonate screen IK10 BZ41 for BC56-BC57-BC62-BC64-BC65 BC69-BC70-BD85 Available in colour 24 108

/$ 635($' EURDG

Â&#x192; 7+52: VKRUW 6/, ',1 .% &(1 * '

Â&#x192;

accessories

180

lamp

451

code

Large optical assembly with electromagnetic control gear BF19 150 W HST 150 W HIT (CDO-TT) BF20 250 W HST 250 W HIT (CDO-TT) BF22 150 W HST (Bi-Energy) Large optical assembly with electronic control gear BF21 315 W HIT(CDM-T Elite) BF77* 140 W HIT(CPO-TW)

Cut-Off System design iGuzzini

DIRECT LIGHTING SYSTEMS FOR URBAN AREAS WALL SYSTEMS FOR URBAN AREAS

Argo iGuzzini

All Argo versions can be ordered with twilight photocell (ON: 70 lux; OFF: 35 lux) code

lamp

Small optical assembly with electromagnetic control gear BD86 50 W HST 50 W HIT (CDO-TT) BC82 70 W HST 70 W HIT (CDO-TT) BC83 100 W HST 100 W HIT (CDO-TT) BC85 150 W HIT-DE 150 W HST-DE BC86* 100 W HST (Bi-Energy) BC88* 150 W HST-DE (Bi-Energy) Small optical assembly with electronic control gear BC81 35 W HIT BC84 140 W HIT (CPO-TW) BC87* 60 W HIT (CPO-TW) BC96* 70 W HST 70 W HIT (CDO-TT) BC97* 100 W HST 100 W HIT (CDO-TT) BD00* 150 W HIT-DE BD01* 150 W HST-DE

optic ,PD[ FG .OP Â&#x192;

& J Â&#x192; &,( Â&#x192;

+67 (

Â&#x192;

Ă¸ 369 ,PD[ FG .OP

Â&#x192;

& J Â&#x192; &,( Â&#x192;

ST ST :

ST ST ST ST

+67 '( 5[ V

Â&#x192;

& J Â&#x192; Â&#x192; &,( Â&#x192;

+,7 &'0 7 * +&, 7 *

Â&#x192; ,PD[ FG .OP FG .OP Â&#x192;

& & J Â&#x192; Â&#x192; &,( Â&#x192;

&32 7: +,7 &'0 7 * 3*=

Â&#x192; ,PD[ FG .OP Â&#x192;

& J Â&#x192; &,( Â&#x192;

+67 '( 5[ V

Â&#x192; ,PD[ FG .OP

A A A A

Â&#x192;

IP66 IK09

/$ 635($' EURDG

Â&#x192; 7+52: VKRUW 6/, ',1 .% &(1 * '

A A

Q/ Q/ Q/ Q/

Â&#x192; /$

635($' QDUURZ 7+52: VKRUW ORQJ 6/, ',1 .% .% &(1 * * '

* Versions available on demand : :

Q/ Q/ Q/ Q/

Â&#x192; /$

635($' QDUURZ 7+52: ORQJ 6/, ',1 .% .% &(1 * '

ST ST ST

Q/ Q/ Â&#x192; /$ 635($' QDUURZ 7+52: VKRUW 6/, ',1 .% &(1 * '

Â&#x192; ,PD[ FG .OP

IP66 IK09

Small optical assembly with electromagnetic control gear BC90 70 W HIT-DE 70 W HST-DE BC91 150 W HIT-DE 150 W HST-DE BC93* 150 W HST-DE (Bi-Energy) Small optical assembly with electronic control gear BC92 140 W HIT(CPO-TW) BC94* 60 W HIT(CPO-TW) BD03* 150 W HIT-DE BD04* 150 W HST-DE

Â&#x192; 8*5

',1 $ 87( ' 7 ) ) ) ) ) ) &,%6( %= %= %=

ST ST

244,5

& J Â&#x192; &,( Â&#x192;

6/, ',1 .% &(1 * '

&32 7: 3*=

/$ 635($' EURDG

Â&#x192; 7+52: VKRUW

Â&#x192;

* Versions available on demand Small optical assembly with electronic control gear BC95 33 W TC-TEL

,PD[ FG .OP Â&#x192;

* Versions available on demand

IP66 IK09

7& 76( (

/$ 635($' QDUURZ

Â&#x192; 7+52: VKRUW 6/, ',1 .% &(1 * '

IP66 IK09

Small optical assembly with electromagnetic control gear BC89 70 W HIT-DE 70 W HST-DE

& J Â&#x192; &,( Â&#x192;

Â&#x192; ,PD[ FG .OP & J Â&#x192; &,( Â&#x192;

Â&#x192;

635($' QDUURZ 7+52: VKRUW 6/, ',1 .% &(1 * '

C : +,7 '( 5[ V

Q/ Q/

Â&#x192; /$

Â&#x192;

* Versions available on demand

accessories code

Polycarbonate screen IK10 BZ43 for BC81-BC82-BC87-BC89-BC90 BC94-BC95-BD96 Available in colour 24 109

Cut-Off System design iGuzzini

DIRECT LIGHTING SYSTEMS FOR URBAN AREAS WALL SYSTEMS FOR URBAN AREAS

Delphi iGuzzini

BC76

BC72 /X[ K P D

/X[ K P D

+67 ( :

+67 '( 5[ V :

BC59

BC56 /X[ K P D

/X[ K P D

+,7 &'0 7 * :

&32 7: 3*= :

BC67

BC79 /X[ K P D

/X[ K P D

+67 '( 5[ V :

&32 7: 3*= :

BC64

BC70 /X[ K P D

/X[ K P D

7& 76( ( :

+,7 '( 5[ V :

BF22

BF20 /X[ K P D

/X[ K P D

+67 ( :

BF24

BF21 /X[ K P D

/X[ K P D

3*= :

+67 ( :

BF25

BF26 /X[ K P D

/X[ K P D

+67 ( :

3*= :

110

Cut-Off System design iGuzzini

DIRECT LIGHTING SYSTEMS FOR URBAN AREAS WALL SYSTEMS FOR URBAN AREAS

Argo iGuzzini

BC83

BD01

/X[ K P D Â&#x192;

+67 ( :

+67 '( 5[ V :

BC81

BC84

/X[ K P D Â&#x192;

+&, 7 * :

&32 7: 3*= :

BC92

BD04 /X[ K P D Â&#x192;

/X[ K P D Â&#x192;

+67 '( 5[ V :

&32 7: 3*= :

BC89

BC95 /X[ K P D Â&#x192;

/X[ K P D Â&#x192;

7& 76( ( :

+,7 '( 5[ V :

111

12000

11000 10000 9000 8000

7000 6000

5000

3500

Compositions or pole-top All compositions illustrated can be obtained by combining the single elements presented in the tables.

470

1200

490

1040

330

369

330

369

330

369

330

369

scale 1:120

1200

pole-top single

double

triple

ø102

ø76

ø102 ø120

ø102

ø120

ø102

code

6123

1000

1000 200 contropiastra fixing plate

BZC9*

120

1205

102

colour

5600

HST

length

100 300

contropiastra fixing plate

W-Saving ø pole 230 V 220 V BG43 + 120 BZC1 70/100 150 BG42 BG43 + + 160 BZG0 BZG0

colour

5600

1291

* Not usable with large body

lamp

code

04-15

5000

1344

W-Saving: maximum nominal power of the lamp up to 250 W. The components that are necessary for the operation of the fittings must be ordered separately. They are presented on page 262

length 4000

1203*

* for poles with ending part with diam. from 46 to 76 mm presented on page 76 (Archilede)

112

200 contropiastra fixing plate

L=500 ø 24

hole foro 100 ø 100

code

BD21 102 BD20

L=400 ø 18

hole foro øø80 80

code

length

1518

102

6800

1521

120

6000

120 5000

1292

colour

04-15

(colour 04 on request)

base for poles

code 1841 1850

ø 420

base for poles colour

code

1292-1521 1522-1523 04-15

1843

poles

size

size 184

code ø pole

410x95

186x45

440

L=400 ø 18

hole foro 70 øø70

ø120

310x95

186x45

350

wall attachment

310x95 186x45

150

120

310

wall intermediate attachment flange

6122

6000

120

800

6121

ø 100

120

ø102

1000

6120

BD19 102

310

102

122

BD18

5000

BD16

102

1000

BD17

600

BD15

ø 100

1000

BD14

1064

ø 5000

BD13

code

600 62 250

3500

code

1064

500 62 250

code

ø 620

1344

poles

colour

1547 1548 1554

04-15

Cut-Off System design iGuzzini

ø76

ø102

ø76

ø102

code

colour

8000

7000

length

8000

7000

6000

code

colour

length

04-15

120

1528

8000

colour

6800

1524

9000

1523

ø159 310x95

ø120

04-15

8000 9000

1555

ø120

12000

10000

1558

102 159

ø120

length

1274

120

10000

1545

120 194

10000 9000

1165 1168

colour

1292

Poles with plate are suitable for the F and E markets

D - CH

poles

1546

120 194

code

h pole (above the ground)

B972** B999**

12000

100

440

code

1552

120 194

9000 10000 9000 10000

B943*

colour

1554

L=650 ø 24

300 contropiastra fixing plate

11000 10000

1862 1865

600

600 150

100

length

(colour 04 on request)

fixing plate with anchoring bolts

1521-1522-1523 1547-1548-1554

1548

(colour 04 on request)

code

1547

contropiastra fixing plate

colour

400x90

hole foro ø188 ø 188

300

contropiastra fixing plate

code

800

350

150

300

400x90

L=500 ø 24

hole foro ø188 ø 188

440

100

440

1000

L=500 ø 24

hole foro ø188 ø 188

310x95

length

1863

1863 1865

colour

12800 15 12000

8000

04-15

The terminal blocks have four polarities with three ways for pole and are fitted for bridge wiring. They are made with class II insulation Code 1862 is equipped with a fuse holder for dim. 8,5x31,5 - 380 V - max 20 A. Suitable for power cables with cross-section 16 mm2 on input and 2.5 mm2 on output to hook up with the light source. Code 1863 is equipped with two fuse holders for dim. 10,3x38 - 380 V - max 20A. Suitable for power cables with cross-section 16 mm2 on input and 2.5 mm2 on output to hook up with the light source. Code 1865 is equipped with two fuse holders for dim. 8,5 x 31,5 - 380 V - max 20 A. Suitable for power cables with cross-section 16 mm2 on input and 2.5 mm2 on output to hook up with the light source.

ø194

1000

310x95 1000

310x95

1000

1000 150

350

1000 1000

3200

310x95

colour

Marine grade plywood support for terminal board B944. Poles on demand for GB

5200

ø194

length

9000

code colour poles ø194

7000

1559

ø120

9000

code

terminal box

186x45

2000 1000

ø159 310x95

1556

DIN guide for D and CH - Poles on demand for D

ø120

ø159

120

04-15

ø120

ø102

310x95

1000 150 350

1000

410x95

1000

410x95

300

1520

120 1522

410x95

ø102

contropiastra fixing plate

length

1519

ø120

1000 440

150

contropiastra fixing plate

code

L=500 ø 24

hole foro ø100 ø 100

300

ø120

800

1000

1000 100

440 50

1000

L=500 ø 24

hole foro øø100 100

410x95

ø120

2000 1000

6000 ø120

186x45

410x95

1000

1000 350

150

1000

ø120

186x45

ø102

100

ø120

350

7000

8000

7000

8000

ø76

2000 1000

ø102

1000 150 350

ø102

1000 150 350

DIRECT LIGHTING SYSTEMS FOR URBAN AREAS WALL SYSTEMS FOR URBAN AREAS

iGuzzini

1203 1205 1274 1344 1518 1519 1520 1521 1522 1523 1291 1292 1521 1522 1523 1545 1546 1547 1548 1552 1554

door key code

colour

0227

00 0246

0246

(colour 04 on request)

The poles featured in the tables are suitable for fixing on I, F and E. For other countries, add the specific fixing systems featured in the table. * **

DIN guide for D and CH Marine grade plywood support for terminal board for GB

113

12000

11000 10000

9000 8000 7000 6000 5000 4000

369

scale 1:120

330

Compositions for arms All compositions illustrated can be obtained by combining the single elements presented in the tables.

530

arm

2550

2850

code ø 102

code ø 120

BZ44

6130

2850

tilted arm with tie rod

1830

code ø 102

BZ48 900

900

BZ45

6135

6131

1500

Arms code BZ48 and 6134 can be used only with Argo and Delphi small body.

BZ46

6132

flange for single arm fixing

114

HST

W-Saving ø pole 230 V 220 V BG43 + 120 BZC1 70/100 150 BG42 BG43 + + 160 BZG0 BZG0

base for poles

code

size

1842 ø 620

base for poles

poles colour

code

1597 1598 1599

1843

poles colour

size 184

lamp

184

W-Saving: maximum nominal power of the lamp up to 250 W. The components that are necessary for the operation of the fittings must be ordered separately. They are presented on page 262

ø 620

1547 1548 1554

Cut-Off System design iGuzzini

DIRECT LIGHTING SYSTEMS FOR URBAN AREAS WALL SYSTEMS FOR URBAN AREAS

iGuzzini

ø102

code

length

120

5600

1542 1597

300

code

length

colour

102

6000

8000

7000

3000 1000

1000 150 350

2000 1000

100

code

1544

102 127

9000

1599

102 159

8000

04-15 7000

1598

300

310x95

contropiastra fixing plate

8000

1543 04-15

ø159 310x95

1000 150 350

1000 440

150

1000 100

L=500 ø 24

hole foro ø151 ø 151

ø159 310x95

1000 150 350

310x95

2000 1000

186x45

contropiastra fixing plate

colour

6800

102

ø159

350

2000

1000

300 contropiastra fixing plate

1291*

L=500 ø 24

hole foro ø151 ø 151

1000

350

310x95

440

100

440 50

150

1000

2000 1000

186x45

L=500 ø 24

hole foro ø151 ø 151

ø159

ø127 ø159

310x95

1000

350

800

150

600

1000

186x45

3000

ø159 310x95

6000

8000

7000

6000

5000

ø120

length

colour

code

04-15

1562

102 159

colour

8000

04-15

9000

1565 On demand for E and D

330

* Black colour (04) supplied on demand

length 6800

1561

ø120

12000

ø120

9000

ø194

terminal box

3200

120 194

colour

10000 9000

1164

1546

120 194

poles

colour

1597-1598 1599-1547 1548 1554

code

colour

code

1552

120 194

15 10000

h pole (above the ground)

B972** B999**

12000

1863

1291 1597 1598 1599

0246

1545 1546 1547 1548 1552 1554

0246

100 300

contropiastra fixing plate

11000

9000 10000 9000 10000

B943*

0227

1862 1865

1542 1543 1544 1597 1598 1599

600 440

150

800

100

length

(colour 04 on request)

fixing plate with anchoring bolts

1165

1548

(colour 04 on request)

code

D - CH

1545 1547

length

contropiastra fixing plate

code

1554

colour

L=650 ø 24

hole foro ø188 ø 188

300

contropiastra fixing plate

code

600

1000

350 50

300

400x90

L=500 ø 24

hole foro ø188 ø 188

440

100

440 50

1000

L=500 ø 24

hole foro ø188 ø 188

150

1000

310x95

1000

350

150

1000

310x95

door key

code colour poles 5200

ø194

3200

ø194

1000

ø120

10000

ø120

length

colour

12800 15 12000

1863 1865

(colour 04 on request)

The poles featured in the tables are suitable for fixing on I, F and E. For other countries, add the specific fixing systems featured in the table. * **

DIN guide for D and CH Marine grade plywood support for terminal board for GB

Poles with plate are suitable for the F and E markets

115

Cut-Off System poles for pole-top design iGuzzini

iGuzzini

• Made of EN10025-S235JR (codes 1518-1519-1521-1524-15561558-1559) or EN10025-S355JR (codes 1520-1522-1523-1528-1555), 70 micron hot galvanized steel as UNI EN ISO 146 (EN40-5). • Powder-coating paint surface finish. • Cylindrical shape with ø 102 mm and end part with ø 76 (code 1518); cylindrical shape with ø 120 mm with end part with ø 102mm (codes 1519-1520-1521-1522-15231524-1528-1555); made of two soldered cylindrical sections with ø 159-102 mm with end part with ø 76 mm (codes 1556-1558-1559). • 3 mm thickness (poles 1523-1555 with 4 mm thickness). • Cable access slot 150x50 mm. • Anchoring plate made of 70 micron hot galvanized steel, with 4 slots. • Plate and fixing bolts (to be ordered separately). • Raised inspection lid IP54 and 186x45 mm dimensions (1518/1519/1520), flush lid with IP44 410x95 mm (1521/1522/1523/1524/ 1528/1555), flush lid with IP44 310x95 mm dimensions (1556/ 1558/1559), all made of die-cast aluminium with seal gasket. • 4-pole terminal block with three connections for each pole and single or double integrated fuse; designed for 16 mm2 feed cables and 2,5 mm2 exit cables. • Versions (codes 1521-1522-1523), with plate are suitable for Italian, French, Spanish, German and German/Swiss terminal blocks (with DIN bar to be ordered separately; poles with codes 1524-1528-1555 suitable for German/Swiss terminal blocks (with DIN bar to be ordered separately); poles with codes 1556-1558-1559 suitable for English terminal blocks (with wooden adapter to be ordered separately). • External (codes 1518-1519-1520) or internal (all other codes) earthing system with cable lug, steel insert and stainless steel screw. • Terminal block: IP43 IK08 (1862-1865), Terminal block: IP44 IK08 (1863).

Customised poles for each European market

116

Available in buried versions or with plate with following heights: 6 m, 7 m, 8 m, 9 m, 10 m e 12 m. • Made of EN10025- S235JR (codes 1542-1543-1597-1598-1599) or EN10025-S355JR (codes 15441545-1546-1547-1548-1552-1554), 70 micron hot galvanized steel as UNI EN ISO 1461 (EN 40-5). • Powder-coating paint surface finish. • Cylindrical shape with ø 102 mm (codes 1542-1543); composed of two soldered cylindrical sections with ø 127-102 mm (code 1544); made of two soldered cylindrical sections with ø159-102 mm (codes 1597-1598-1599), made of two soldered cylindrical sections with ø194-120 mm (codes 15451546-1547-1548-1552-1554). • The upper part of the pole is provided with four through holes and stainless steel threaded inserts for tie rod fixing. • 3-4 mm thickness. • Cable access slot 150x50 mm. • Anchoring plate made of 70 micron hot galvanized steel, with 4 slots. • Plate and fixing bolts (to be ordered separately). • Flush inspection lid 310x95 mm (for poles with codes 1545-1546-15471548-1552-1554-1597-1598-1599) or raised inspection lid 186x45 mm (for poles with codes 1542-15431544) made of cast aluminium with seal gasket. • 4-pole terminal block with three connections for each pole and single or double integrated fuse; designed for 16 mm2 feed cables and 2,5 mm2 exit cables. • Versions with h=9/10/12 m and 6/7/8 with plate are suitable for Italian, French, Spanish and English terminal blocks (with wooden adapter to be ordered separately) and German/Swiss (with DIN bar to be ordered separately). • Internal earthing system (for poles with h=9/10/12 m) or external earthing system (for poles with h=6/7/8 m) with earthing lug, steel insert and stainless steel screw. • Inspection lid: IP44 (for poles with h=9/10/12 m and 6/7/8 with plate), IP54 IK10 (for poles with h=6/7/8 m). • Terminal block: IP44 IK08 (for poles with h=9/10/12 m), IP43 IK08 (for poles with h=6/7/8 m).

Cut-Off System poles for arms design iGuzzini

iGuzzini

• Made of EN10025-S235JR (codes 1542-1597-1598-1561-15621565) or EN10025-S355JR (codes 1543-1544), 70 micron hot galvanized steel as UNI EN ISO 1461 (EN40-5). • Powder-coating paint surface finish. • The pole has a cylindrical crosssection with a 102mm diameter (1542-1543); it is either formed with two cylindrical joints with 127mm and 102mm cross sections, welded together (1544) or it is formed with two cylindrical joints with 1159mm and 102mm cross sections (codes 1597-1598-1599-1561-1562-1565). • The upper part of the pole is provided with six through holes and stainless steel threaded inserts for arm fixing with tie rod. • 4 mm thick (1542/1543/1544/ 1599/1565); 3 mm thick (1597/1598/1561/1562). • Cable access slot 150x50 mm. • Anchoring plate is made of 70 micron hot galvanized steel, and has 4 slots. • Anchor bolts and plate (to be ordered separately). • Raised inspection lid IP54 186x45 mm (codes 1542-1543-1544) or flush inspection IP44 310x95 mm (1597-1598-1599-1561-1562-1565) • 4-pole terminal block with three connections for each pole and single or double integrated fuse; designed for 16mm2 feed cables and 2,5mm2 exit cables. • Poles (1597-1598-1599) suitable for Italian, French and Spanish terminal blocks, poles (1561-1562-1565) suitable for German/Swiss and English terminal blocks (with wooden adapter and DIN bar to be ordered separately); poles (1542-1543-1544) suitable for Italian terminal blocks. • Internal grounding system (1597-1598-1599-1561-1562-1565) or external grounding system (1542-1543-1544) with grounding lug, steel insert, and stainless steel screw. • Terminal block: IP43 IK08 (1862/1865), Terminal block: IP44 IK08 (1863).

Available in buried versions or with plate with following heights: 9 m, 10 m e 12m. • Made of EN10025-S355JR (codes 1545-1546-1547-1548-1552-1554), 70 micron hot galvanized steel as UNI EN ISO 1461 (EN 40-5). • Powder-coating paint surface finish. • Made of two cylindrical sections with ø194-120 mm (codes 1545-15461547-1548-1552-1554). • The upper part of the pole is provided with six through holes and stainless steel threaded inserts for arm fixing with tie rod. • 3-4 mm thickness. • 150x50 mm slot for cable entrance. • Anchoring plate made of hot galvanized steel with 70 micron thickness, with 4 slots. • Anchoring plate and bolts (to be ordered separately). • Flush inspection lid 310x95 mm (for poles with codes 1545-15461547-1548-1597-1598-1599) and flush inspection lid 400x90 mm (1552-1554) made of cast aluminium with seal gasket. • 4-pole terminal block with three connections for each pole and single or double integrated fuse; designed for 16mm2 feed cables and 2,5mm2 exit cables. • Versions with h=9/10/12 m with plate are suitable for Italian, French, Spanish and English terminal blocks (with wooden adapter to be ordered separately) and German/Swiss (with DIN bar to be ordered separately). • Internal earthing system (for poles h=9/10/12 m) with earthing lug, steel insert and stainless steel screw. • Inspection lid: IP44 (for poles with=9/10/12 m). • Terminal block: IP44 IK08 (for poles with=9/10/12 m.

Customised poles for each European market

117

Argo span-wire installation

Adjustability and retention system Cord

Driver

118

Replaceable LED unit

Spike protection

• Wiring suspended luminaire with direct emission for LEDs with street optic. • Suspended installation. • Made up of optical assembly and fixing system. • Optical assembly and inspection lid made of die-cast aluminium, with hemispherical shape, subjected to chromatization, double primer, passivation at 120° C, liquid (texturized black) paint, baking at 150°C; opening with clips without tools, lid fixed with hinge. Diffuser sealed with silicone to PMMA body with 3 mm thickness; 50 Shore black silicone seal. • Optical assembly complete with decompression valve. • +15°/-15% orientation with respect to horizontal axis; 360° orientation with respect to vertical axis. • Monochromatic LED version with 48-power LED circuit, in Cool White (6000K) and Neutral White (4200K) colour temperature, optics with plastic lens. • LED average life at 25°C RT: L70>90000 h. • Electronics average life at 25°C RT =100000 h. • Pull-out control gear and optical assembly connected with fastcoupling connectors for quick independent operation. • 220-240Vac 50/60 Hz built-in selv electronic ballast.

PROTOCOL

Versions with DALI electronics (for remote management of each single light point) available on demand.

DIRECT LIGHTING SYSTEMS FOR URBAN AREAS

iGuzzini

design iGuzzini

Versions with electronics for Ta up to -40°C available on demand.

• Driver with internal temperature automatic control system. • Product operation at 100% for Room Temperature from -20 °C to + 40°C, at higher RT values the system reduces the intensity of power supply current of the LEDs to allow for correct operation. • Version for -40°C RT on demand. • Driver with 4 predefined operation profiles selected with dip switches, possibility of personalised operation cycles with dedicated software via USB flash drive. • Protection system against mains spike up to 4Kv. • Terminal block with 4 AT fuse. • Stainless-steel external screws. • Die-cast aluminium fixing system with anchoring system to AISI 304 stainless steel wire. • Attached on cables/wires with diam. from 6 to 12mm. • Stainless steel anti-fall safety system. • No light flow emission in upper hemisphere in horizontal position (in compliance with the strictest regulations against light pollution). • The technical characteristics of the fitting comply with EN60598-1 standard. • IP66 • F seal • ENEC approval • Class of Insulation II

Argo span-wire installation Registered Design Patent Pending

code

lamp

optic

The products are suitable for operation at -20Â°C. ,PD[ FG

Optical assembly with monochromatic LED 7010 48x1 W cool white ST BF06 48x1 W neutral white ST IP66

Q/ /$

Â&#x192; 635($' QDUURZ

7+52: LQWHUPHGLDWH 6/, &(1 * '

Cool white = 6000K Neutral white = 4000K [ : 1HXWUDO

Kg. 9,5

& J Â&#x192; &,( Â&#x192;

Â&#x192;

391

DIRECT LIGHTING SYSTEMS FOR URBAN AREAS

iGuzzini

design iGuzzini

Ă¸ 370

/('

Â&#x192;

/X[ K P D Â&#x192;

/(' [ :

Available on demand: â&#x20AC;˘ electronic DALI versions â&#x20AC;˘ versions for ambient temperature up to -40Â°C

accessories code

code

Software BZ39

Interface USB BZ38

Available in colour 00

Available in colour 04

119

Delo

Argo Installation with double pole-top

120

Delo - Argo design iGuzzini - Devine

iGuzzini

Argo

The various types of optics enable a uniform, non-glare spread of light, avoiding the useless emission of light into the sky. This system is particularly useful for lighting streets with moderate traffic and residential areas. No upward emission of light flow

W-Saving: automatic flow regulator

Height: 10000 mm Link roads, squares, avenues with intense traffic, crossroads. Height: 8000 mm Squares, avenues and moderate traffic, crossroads.

Height: 5000 mm Pedestrian areas, residential streeets, parks, car parks

scale 1:200

121

Delo - Argo design iGuzzini - Devine

iGuzzini

Road Optic (ST) Allows for greater centre-to-centre distance between the poles in compliance with the lighting requirements for motor traffic.

HST 250 W E40 h

29,60 0,40

0,67

2,32

0,38

0,66

1,48

0,18

10 m 37,00

0,5 m 1 m

0,40

Lmed TI%

h Uo UL 7m

Asymmetrical Optic (A) Fixtures with this type of optical assembly, which is especially suitable for lighting squares, can be mounted on walls. The flow of light directed over the surrounding spaces produces a discreet lighting. The excellent screening of these fixtures ensures glare is kept to a minimum.

HIT 250 W E40 a

ill. ab. L1xL2

Emax

Emed

5 m 8x10 m 100 lux

48 lux

10 m

8 m 10x16 m 45 lux

25 lux

16 m

10 m 12x20 m 27 lux

18 lux

20 m

L1 L2

Optic II Ideal for lighting bicycle paths and walkways. This optic ensures elevated average lighting values and therefore contributes to bicycle and pedestrian safety. This reflector allows for an elevated spacing between poles, thus obtaining improved energy savings all the while guaranteeing elevated average lighting values in compliance with class S1 of the EN 13201-2 norm.

HST 100 W E40 a

ill. ab. L1xL2

Emax

Emed

6 m 3x29 m 55,4 lux 19,7 lux

a 29 m

Optic II Suitable for streets, this optical assembly ensures a high level of luminance for the road, making it safer for traffic. Its asymmetry prevents the light from reaching the neighbouring buildings, at the same time bathing the pavements in a discreet light. This particular reflector enables a wider spacing between poles. The lower number of fixtures reduces energy costs whilst guaranteeing the same level of lighting.

HIT 250 W E40

ill. ab. L1xL2

Emax

Emed

5 m 7x8 m

180 lux

91 lux

8 m 10x13 m 130 lux

65 lux

13 m

10 m 13x17 m 85 lux

44 lux

17 m

L1 L2

Uo= Average uniformity of zone examined UL= Longitudinal uniformity Lmed= Average luminance in cd/m2 h= Installation height a= Distance between poles TI= Physiological glare Emed = verage lighting in the area Emax = max lighting in the area

122

Delo - Argo design iGuzzini - Devine

iGuzzini

The optical assembly is available in cylindrical or hemispherical versions. The arms adapt to the different shapes of the optical assembly.

In the wall-mounted version the arm can be either fixed or adjustable. As for the pole system, the optical assembly is available in a cylindrical and hemispherical form.

sales order

The commercial order should be completed based on the elements making up the system.

palo pole

braccio arm

vanoassembly ottico optical

The pole is available in two versions, with fixing plate or for burying.

123

Delo - Argo design iGuzzini - Devine

Photo: Giuseppe Saluzzi

iGuzzini

London - Great Britain: Fenchurch Place

124

Delo - Argo design iGuzzini - Devine

DIRECT LIGHTING SYSTEMS FOR URBAN AREAS WALL SYSTEMS FOR URBAN AREAS

iGuzzini

Photo: Giuseppe Saluzzi

micron, secured with stainless steel screws. The lamp holder is secured to the reflector with an aluminium support. The lamp has an antiloosening device. • Pull-out aluminium control gear plate; power supply with a non-explosive power factor correction capacitor, quick-connecting terminals. • There is no light dispersion into the upper hemisphere above this luminaire. • All screws are A2 stainless steel. • The pole’s arm and the adjustable wall-mounted model are made of extruded aluminium. The wallmounted version can be adjusted to an orientation of 3°, 7,5° and 12°. • The technical characteristics of the fitting comply with EN60598-1 standard. • IP66 IK08 • F seal • ENEC approval • Class of Insulation II

Porto Recanati (Mc) - Italy: Promenade Scossicci

Delo

• Direct lighting system, for use with metal halide and sodium discharge lamps. • Fixture can be installed on a pole or wall-mounted. • Fitting has an optical assembly, arm (single or double) and pole. • Aluminium optical assembly, with dual phosphorus-chromium plating of the base metal, followed by passivation heat treatment at 120° C, painting, and curing at 150° C. It has a square shape (Delphi model), a cylindrical shape (Delo model) or hemispheric shape (Argo model), that is sealed in the lower section by a tempered sodium-calcium sealing glass, 4 mm thick, and transparent. Spiral retention cable made of galvanized steel, 1,2 mm diameter, 49 wires. Expanded silicone rubber gasket, with a post-curing (in oven) time of 4 hours at 200° C. 99,9% ultrapure aluminium sheet reflector (thickness of 1,5 mm) double process anodized thickness of 5÷6

Argo

Adjustability in the wall-mounted version

Spread of optical assembly 1/4 turn

Removable plate

125

Delo design iGuzzini - Devine

DIRECT LIGHTING SYSTEMS FOR URBAN AREAS WALL SYSTEMS FOR URBAN AREAS

iGuzzini 03

For the post or wall mounting methods, see page 130. lamp ,PD[ FG .OP

IP66 IK08 :

Â&#x192;

Â&#x192; ,PD[ FG .OP

HST

Â&#x192;

& J Â&#x192; &,( Â&#x192;

+67 (

Road Optic 7876 250 W

Â&#x192; ,PD[ FG .OP

HIT

Â&#x192;

& J Â&#x192; &,( Â&#x192;

+,7 (

Road Optic B159 100 W HST 100 W HIT (CDO-TT)

Â&#x192; ,PD[ FG .OP & J Â&#x192; &,(

IP66 IK08 :

Â&#x192;

7662

Â&#x192;

IP66 IK08

Â&#x192;

: +67 (

126

& J Â&#x192; &,( Â&#x192;

Q/ /$

Â&#x192; 635($' EURDG

7+52: LQWHUPHGLDWH 6/, ',1 .% &(1 * '

Â&#x192; ,PD[ FG .OP

IP66 IK08

Q/ /$

Â&#x192; 635($' EURDG

7+52: LQWHUPHGLDWH 6/, ',1 .% &(1 * '

+,7 (

100 W HST 100 W HIT (CDO-TT)

& J Â&#x192; &,( Â&#x192;

Â&#x192; ,PD[ FG .OP

Optic II B160

7+52: VKRUW 6/, ',1 .% &(1 * '

+67 (

Q/ /$

Â&#x192; 635($' QDUURZ

Â&#x192; ,PD[ FG .OP

150 W HST 150 W HIT (CDO-TT) 250 W HST 250 W HIT

Â&#x192;

+67 (

Optic II 7661

Q/ /$

Â&#x192; 635($' QDUURZ 7+52: VKRUW 6/, ',1 .% &(1 * '

IP66 IK08 :

Q/ /$

Â&#x192; 635($' QDUURZ 7+52: VKRUW 6/, ',1 .% &(1 * '

IP66 IK08 :

Q/ /$

Â&#x192; 635($' QDUURZ 7+52: VKRUW 6/, ',1 .% &(1 * '

+67 (

Road Optic 7857 250 W

& J Â&#x192; &,( Â&#x192;

Q/ /$

Â&#x192; 635($' EURDG

7+52: LQWHUPHGLDWH 6/, ',1 .% &(1 * '

Â&#x192;

254

Road Optic 7856 150 W HST 150 W HIT (CDO-TT)

Ă¸ 457

code

Argo design iGuzzini - Devine

DIRECT LIGHTING SYSTEMS FOR URBAN AREAS WALL SYSTEMS FOR URBAN AREAS

iGuzzini 03

For the post or wall mounting methods, see page 130. lamp

Road Optic 7860 150 W HST 150 W HIT (CDO-TT)

,PD[ FG .OP

IP66 IK08 :

Â&#x192;

Â&#x192; ,PD[ FG .OP

HST

Â&#x192;

& J Â&#x192; &,( Â&#x192;

+67 (

Road Optic 7877 250 W

Â&#x192; ,PD[ FG .OP

HIT

Â&#x192;

& J Â&#x192; &,( Â&#x192;

+,7 (

Road Optic B161 100 W HST 100 W HIT (CDO-TT)

Â&#x192; ,PD[ FG .OP & J Â&#x192; &,(

IP66 IK08 :

Â&#x192;

7671

Â&#x192;

IP66 IK07

Â&#x192;

: +67 (

& J Â&#x192; &,( Â&#x192;

Q/ /$

Â&#x192; 635($' EURDG

7+52: LQWHUPHGLDWH 6/, ',1 .% &(1 * '

Â&#x192; ,PD[ FG .OP

IP66 IK07

Q/ /$

Â&#x192; 635($' EURDG

7+52: LQWHUPHGLDWH 6/, ',1 .% &(1 * '

+,7 (

100 W HST 100 W HIT (CDO-TT)

& J Â&#x192; &,( Â&#x192;

Â&#x192; ,PD[ FG .OP

Optic II B162

7+52: VKRUW 6/, ',1 .% &(1 * '

+67 (

Q/ /$

Â&#x192; 635($' QDUURZ

Â&#x192; ,PD[ FG .OP

150 W HST 150 W HIT (CDO-TT) 250 W HST 250 W HIT

Â&#x192;

+67 (

Optic II 7670

Q/ /$

Â&#x192; 635($' QDUURZ 7+52: VKRUW 6/, ',1 .% &(1 * '

IP66 IK08 :

Q/ /$

Â&#x192; 635($' QDUURZ 7+52: VKRUW 6/, ',1 .% &(1 * '

IP66 IK08 :

Q/ /$

Â&#x192; 635($' QDUURZ 7+52: VKRUW 6/, ',1 .% &(1 * '

+67 (

Road Optic 7861 250 W

& J Â&#x192; &,( Â&#x192;

330

code

Ă¸ 457

& J Â&#x192; &,( Â&#x192;

Q/ /$

Â&#x192; 635($' EURDG

7+52: LQWHUPHGLDWH 6/, ',1 .% &(1 * '

Â&#x192;

127

Delo - Argo design iGuzzini - Devine

DIRECT LIGHTING SYSTEMS FOR URBAN AREAS WALL SYSTEMS FOR URBAN AREAS

iGuzzini

7853-7857-7861

7852-7856-7860 /X[ K P D Â&#x192;

/X[ K P D Â&#x192;

+67 ( :

B157-B159-B161

7875-7876-7877 /X[ K P D Â&#x192;

/X[ K P D Â&#x192;

+,7 ( :

+67 ( :

7641-7661-7670 /X[ K P D Â&#x192;

7642-7662-7671 /X[ K P D Â&#x192;

+67 ( :

+,7 ( :

B158-B160-B162 /X[ K P D Â&#x192;

7322 /X[ K P D Â&#x192;

+67 ( :

7324 /X[ K P D Â&#x192;

+,7 ( :

128

+67 ( :

Delo - Argo poles iGuzzini

• External 186x45 mm access cover (for pole with a 102 mm diameter) or flush 310x95 mm access cover (for poles with120/160 mm diameters) made of cast aluminium and equipped with watertight gasket. • 4-pole terminal block with three connections for each pole and single (for pole with a 102 mm diameter) or double (for poles with 102/160 mm diameters) integrated fuse; designed for 16mm2 feed cables and 2,5mm2 exit cables. • External grounding system (for pole with a 102 mm diameter) or internal grounding system (for poles with 102/160 mm diameters), with grounding lug, steel insert and stainless steel screw. • Polycarbonate top end cap. • Access cover: IP54 IK10 (for pole with a 102 mm diameter), IP44 (for poles with 102/160 mm diameters). • Terminal block: IP43 IK08 (for pole with a 102 mm diameter), IP44 IK08 (for poles with 102/160 mm diameters).

Tapered pole

Protruding inspection lid IP54

Photo: A. Rubio & Asociados

• Supplied in flange or root mounted versions. H=3,5 m, 5 m, 7 m, 8 m and 10 m models available. • Made of EN10025-S235JR 70 micron hot galvanized steel as UNI EN ISO 1461 (EN 40-5) standards. • Texturised acrylic power-coating paint surface finish. • Cylindrical cross-section with a diameter of 102 mm (for the h=3,5/5/7 m pole); 120 mm (for the h=5 m pole) or 160 mm (for the h=8 m pole); formed with two cylindrical cross-sections with diameters of 194-120 mm, and a joint with 12 M12 bolts (for the h=10 m pole). • 3/4 mm thick. • The pole that is cemented into the ground has a slot for feed cables. • Anti-corrosion reinforcing ring welded to the pole with completely sealed weld bead (for the 102/160 mm diameter poles). • Anchoring plate made of 70 micron hot galvanized steel. • Anchor bolts and plate available in different sizes to fit the different poles.

Fuengirola - Spain: Promenade

design iGuzzini

Flush inspection lid IP44

Strengthening collar

129

10000

8000

5000

All compositions illustrated can be obtained by combining the single elements presented in the tables scale 1:100 scala 1:100

1344

712

Arm for fixed wall-mounted unit

140

155

ø160 1347

(Delo)

ø102 1333

ø120 1392

ø160 1349

(Argo)

ø102

1397

1832

(Delo)

1399

1834

(Argo)

(Argo) 5000

ø120 1388

ø102

7000

ø102 1331

752

Arm for adjustable wall-mounted unit

140

arms for pole

1286

170

562

186x45

0227

1366 1378 1379 1382 1383

1863

lamp

100 150 250

1064 1000

600 60 220

310 200 fixing plate contropiastra

0246 Poles* for single optical assembly

code

BG42 BG43 + + BZC1 BZC1

160

BG43 + BZG0

194

BG42 + BZG1

1205 1344

colour

length 8000

1209

W-Saving ø pole 230 V 220 V 120

HST

130

L=400 ø 18

hole foro øø 70

100

1238 1239 1205 1209 1344

1862 1865

colour 1000

code

1064

code colour poles

102

04 15

5600 5000

Fixing plate with anchoring bolts code 1168 for pole code 1344

code

colour

size 122

W-Saving: maximum nominal power of the lamp up to 250 W. The components that are necessary for the operation of the fittings must be ordered separately. They are presented on page 262.

door key

terminal box

base for pole

1850 ø 420

04 15

*The poles are supplied without holes for arms

Delo - Argo design iGuzzini - Devine

DIRECT LIGHTING SYSTEMS FOR URBAN AREAS WALL SYSTEMS FOR URBAN AREAS

iGuzzini

ø120

1304

694

712

1344 ø160

ø120

8000

10000

ø120

5000

6200

ø194

310x95 310x95

04 15

1238 1239

code

*The poles are supplied without holes for arms

base for pole

04 15

1000 150 350

4200 100

440

1200

1350

code

length 9000

1379

04 15

6200

160 1383

8000

Poles* for two optical assemblies and single optical assembly

colour

code

length

colour

04 15

1366

120 194

11200

04 15

Fixing plate with anchoring bolts code 1165 for pole code 1383

code

colour

size

ø 420

1000 150 350

100

7000

1841

Poles* for two optical assemblies and single optical assembly

colour

120

colour 122

base for pole

ø 420

length

Fixing plate with anchoring bolts code 0453 for pole code 1239

size

1841

122

Fixing plate with anchoring bolts code 1168 for pole code 1382

code

310

code

04 15

colour

size 184

5000

Poles* for two optical assemblies and single optical assembly

colour

300 fixing plate contropiastra

base for pole

120 1382

800

100

310

200 fixing plate contropiastra

length

L=500 ø 24

hole foro ø ø 80 80

200

5600

1378

L=500 ø 18

hole foro ø 80 80

fixing plate contropiastra

Poles* for two optical assemblies and single optical assembly

1000

1000 600 150 350

L=400 ø 18

hole foro øø 80

code

310x95

186x45

1842 ø 620

04 15 131

132

Salaria System design iGuzzini

iGuzzini

Objects, places, crossroads, relationships, paths, and patterns... it is Light that brings out the details of human beings, our activities, and our world. Within cities, light must have the ability to be flexible for the purposes of maintenance, style, wellness, and the reduction of glare and of light pollution. For all of these issues, Salaria is the answer.

Salaria is a special system for city lighting based on the quality of light flow and on its formal integration within context. These fittings, designed for use with energy saving lamps, offer the possibility of installing symmetrical, asymmetrical or road optics. They have a reduced esthetical impact and, thus, eliminate glare phenomena as well as energy and flow dispersion.

No upward emission of light flow

W-Saving: automatic flow regulator

7000 mm

5000 mm

scale 1:200

133

Salaria System design iGuzzini

iGuzzini

The different areas illustrated on this page find their most suitable lighting solution with Sistema Salaria. Each application complies with the requirements of European lighting standards (EN 13201-2).

Moreover, this urban furniture system fully meets the new legislation on the reduction of lighting pollution: Luminous flux upwards = 0.

Road Optic (ST) Applications in urban roads with ME3c lighting class.

HIT (CDO-TT) 150 W E40 a

33 m

0,43

0,82

Lmed TI% 1,04

0,5 m 1 m

Uo UL 7,5 m

Road Optic (ST) Applications in urban areas, such as streets in retail or pedestrian areas with CE3 lighting class.

HIT (CDO-TT) 70 W E27 a

ill. ab. Emax Emed L1xL2

7 m 40x6 m 31 lux 17 lux

0,4 22 m

L1 L2

Road Optic (ST) Applications in bicycle lanes with and without W-Saving luminous flux regulator. The use of one 70W light source without W-Saving meets the requirements of S2 lighting class. The use of W-Saving allows for reducing the power of the lamp to 50W while meeting the requirements of S3 lighting class.

HST 70 W E27 a

Emed

Emin

13 lux

4,3 lux

32 m

0,33

Cycle lane S2, EN 13201 Standard

HST 70 W E27 h

Emed

Emin

10 lux

2,1 lux

32 m

0,21

Cycle lane S3, EN 13201 Standard Uo= Average uniformity of zone examined UL= Longitudinal uniformity h= Installation height a= Distance between poles TI= Physiological glare g1= Illuminance uniformity Emed = average lighting in the area Emax = max lighting in the area

134

Salaria System design iGuzzini

iGuzzini

Comparing the luminous efficiency The replacement of Public optical assembly with Salaria upgrades the installation to standards, without having to intervene directly on the system and always guaranteeing maximum luminous efficiency.

By simulating the operation of a theoretical installation with 4 columns, we can compare the use of Public and Salaria optical assemblies with the following results: â&#x20AC;˘ Wattage reduction - 30% Illuminance value + 60% CO2 reduction per year - 216 Kg

Public

Salaria HST 100 W E40

ill. ab. L1xL2

Emax

Emed

HST 70 W E40 g1

5 m 10 m 15x15 m 27,9 lux 17,8 lux 0,51

ill. ab. L1xL2

Emax

Emed

5 m 10 m 15x15 m 48 lux 28,2 lux 0,33

L2 L1

System configuration with replaceable parts

Replace optical assembly

Public

Down-light version

Up-light version

Version with short arm

Replace optical assembly and rotate arm

Replace optical assembly + arm and add flange

AgorĂ

Replace optical assembly

Possible rotation of optic according to arm position with respect to the road

135

The Salaria system is made up of pole, arm, flanges and optical assembly. The use of Public optical assembly with arm allows for upgrading old installations with globe diffusers in compliance with the standards.

Salaria optical assembly

Public optical assembly

Salaria arm Ă¸ 48 mm

Public arm Ă¸ 60 mm

The great range of combinations available with this system derives from the diecast aluminium flanges. The flanges create an extremely strong support between the pole and the arms which support the light fittings. The fixtures used to bolt the fitting to its support must conform to European regulations.

The pole is available in the version with buried base

136

Version with intermediate arm

Salaria System design iGuzzini

iGuzzini

The Salaria System can be wall mounted too.

The set of two flanges allows for wall installation of the Salaria system

sales order

The commercial order should be completed based on the elements making up the system.

palo pole

braccio arm

flange flange

vano assembly ottico optical

137

Salaria System design iGuzzini

DIRECT LIGHTING SYSTEMS FOR URBAN AREAS WALL SYSTEMS FOR URBAN AREAS

iGuzzini

Naples - Italy: Residential area

Photo: Enrico Lattanzi

• Direct lighting system, for use with metal halide and sodium discharge lamps. • Fixture can be installed on a pole or wall-mounted. • Fitting has an optical assembly, arm (single or double) and pole. • Optical assembly shaped like a hemisphere, in machined aluminium sheet (thickness of 2 mm), with dual phosphorus-chromium plating of the base metal, followed by passivation heat treatment at 120° C, liquid acrylic paint surface finish, curing at 150° C. Steel retention cable, 1,2 mm diameter, with contoured heads. Tempered glass safety screen and black silk-screening, 6 mm thick, transparent. Anti-stain black silicone 50 Shore A gasket, with a post-curing (in oven) time of 6÷10 hours at 200° C. 99,9% ultrapure aluminium reflector with a high-bright finish; EPDM 65±5 Shore A black cable clamp. Porcelain lamp holder. The lamp has an anti-loosening device. • Pull-out control gear plate in 99,5% UNI 9001/2 H14 1/2 raw pure aluminium; spacers and captive screws; power supply with a double disconnect power factor correction capacitor, quick-connecting terminals. • There is no light dispersed into the upper hemisphere above the system. • All screws are A2 stainless steel. • Galvanized EN10025-S235JR steel arm (48 mm diameter), subjected to polyester powder-coating paint surface finish, mounting flanges for fastening to the pole made of die-cast aluminium alloy EN1706AC 46100LF, powder-coating paint treatment. Two steel M6x20 mm screws with anti-loosening system lock the arm onto the pole. • The technical characteristics of the fitting comply with EN60598-1 standard. • IP65 IK08 • F seal • ENEC approval • Class of Insulation II

Adjustment of the flatness of the bowl

138

Spread of optical assembly 1/4 turn

Removable plate

Salaria System design iGuzzini

DIRECT LIGHTING SYSTEMS FOR URBAN AREAS WALL SYSTEMS FOR URBAN AREAS

iGuzzini 03

lamp

optics

Optical assembly for arm code 1057 B261 70 W HST ST 70 W HIT (CDO-TT) B262 100 W HST ST 100 W HIT (CDO-TT) B263 150 W HST ST 150 W HIT (CDO-TT)

,PD[ FG .OP

& J Â&#x192; &,(

Q/ /$

Â&#x192;

7+52: VKRUW 6/, ',1 .% &(1 * '

Ă¸ 43

Â&#x192; 635($' QDUURZ

+,7 &'2 77 (

364

code

Ă¸ 464

Â&#x192; ,PD[ FG .OP & J Â&#x192; &,(

IP65 IK08

Q/ /$

Â&#x192;

Â&#x192; 635($' QDUURZ 7+52: VKRUW 6/, ',1 .% &(1 * '

: +,7 &'2 77 (

Â&#x192; ,PD[ FG .OP & J Â&#x192; &,(

Q/ /$

Â&#x192;

Â&#x192; 635($' QDUURZ 7+52: VKRUW 6/, ',1 .% &(1 * '

: +,7 &'2 77 (

Â&#x192;

Optical assembly for arm code 1050 B208 70 W HST ST 70 W HIT (CDO-TT) B209 100 W HST ST 100 W HIT (CDO-TT) B210 150 W HST ST 150 W HIT (CDO-TT)

364

Ă¸ 54

Ă¸ 464

IP65 IK08

Part numbers B208-B209-B210 can be installed on an arm, model number 1050 positioned downwards. They can be used as substitutes for attachments with globes (Public System) that are already installed, in order to comply with even the strictest laws against light pollution.

B261

B262

/X[ K P D Â&#x192;

+,7 &'2 77 ( :

B263 /X[ K P D Â&#x192;

+,7 &'2 77 ( :

139

7000

5000

scale 1:100

1083

code

flange for poles

135

arm

code

flanges for wall-mounted version

code

1040

Ă¸48

1057

960

1056

170

1050 335

Ă¸60

135

1041

150

135

708

405

Public System

2030

270

954

Salaria System

2030

720

terminal box 1042

code

colour

1205 1209 1273

0227

365

1862 1865 Two flanges must be ordered to fix the arm on column or wall

140

door key

code colour poles 00

The terminal blocks have four polarities with three ways for pole and are fitted for bridge wiring. They are made with insulation class II. Code 1862 is equipped with a fuse holder for dim. 8,5x31,5 - 380 V - max 20A. Suitable for power cables with cross-section 16 mm2 on input and 2.5 mm2 on output to hook up with the light source. Code 1865 is equipped with two fuse holders for dim. 8,5 x 31,5 - 380 V - max 20 A. Suitable for power cables with cross-section 16 mm2 on input and 2.5 mm2 on output to hook up with the light source.

Salaria System design iGuzzini

DIRECT LIGHTING SYSTEMS FOR URBAN AREAS WALL SYSTEMS FOR URBAN AREAS

iGuzzini

1083

2030

1042

1820 ø102

ø102

7000

ø102

5000

ø127

250

1000 62

1000

600 62 250

1000

186x45

1064

186x45

1064

186x45

lamp

ø pole

W-Saving 220 V

code

length

colour

code

length

colour

code

length

colour

HST

70/100 150

127

BG43 + BZC1

1205

102

5600

1209

102

8000

1273

102 127

8000

W-Saving: maximum nominal power of the lamp up to 250 W. The components that are necessary for the operation of the fittings must be ordered separately. They are presented on page 262.

For single and double compositions

For single compositions

For double and triple compositions

141

Salaria System poles design iGuzzini

iGuzzini

• External 186x45 mm access cover (for h = 5 or 7m poles) made of cast aluminium and equipped with watertight gasket. • 4-pole terminal block with three connections for each pole and single integrated fuse; designed for 16mm2 feed cables and 2,5mm2 exit cables. • External grounding system with grounding lug, steel insert, and A2 M8x17stainless steel screw. • Polycarbonate top end cap. • Access cover: IP54 IK10 • Terminal block: IP43 IK08

Pregnana Milanese (Mi) - Italy: city ways

Photo: Giuseppe Saluzzi

• Available only in root mounted versions. H= 5 m and 7 m models available. • Made of EN10025-S235JR 70 micron hot galvanized steel as UNI EN ISO 1461 (EN 40-5) standards. • Texturised acrylic powder-coating paint surface finish. • The pole has a cylindrical cross-section with a 102mm diameter (for the h= 5/7 m poles) or it can be tapered with cross-sections of 127-102 mm (for the h=7 m pole). • 3 mm thick (pole code 1273, 4 mm thick). • The pole is cemented into the ground and has a slot for feed cables that is 62x42 mm.

Protruding inspection lid IP54

142

Architectural Lighting

Photo: Michael Pickerill

iGuzzini

Brisbane, Australia Kurilpa Park and bridge Lighting project: Arup Architectural project: Cox Rayner

143

iRoad fittings for street and residential lighting can be described many ways: uniform light, no glare, no upward dispersion, in full compliance with the standards that govern against light pollution, a strong and technical image but with great design and dĂŠcor. iRoad can also be installed in parks and other landscaped areas, and parking lots. iRoad means city lighting isn't only something that's functional, but something that communicates a look and feel.

144

Optic with silk-screened glass

Upward emission of light flow = 0

W-Saving: automatic flow regulator

iRoad design J. M. Wilmotte

iGuzzini

The product has been awarded the following prize: - iF Design Award 2006

Height: 10000 mm

Height: 8000 mm Link roads, squares, avenues with intense traffic, crossroads. Height: 6000 mm Squares, avenues and moderate traffic, crossroads.

scale 1:200

145

iRoad design J. M. Wilmotte

iGuzzini

These fittings have professional, road or flood asymmetric optics; arms that extend horizontally; and a range of discharge lamps that allow one to choose the most appropriate chromatic yield for each context. These topperformance fittings were especially

designed for lighting roads and large open areas for public and private use. The iRoad optics have undergone a special treatment making them resistant to atmospheric agents while maintaining their operations capabilities.

Road Optics (ST) The Road optics make it possible to obtain a greater distance between the posts, consequently with fewer fixtures, less visual impact, lower purchase, maintenance and power costs.

HST-DE 150 W Rx7s a

36,7

0,40

0,66

Lmed TI% 1,01

0,18

0,5 m 1 m

h Uo UL 8,3 m

HST-DE 70 W Rx7s a

22,2

0,43

0,80

Lmed TI% 1,01

0,12

0,5 m 1 m

Uo UL

4,4 m

Asymmetric Optic (A45째) The Asymmetric optic allows glare and light pollution to be drastically reduced and and also curbs stray light falling onto facades of buildings.

HST-DE 150 W Rx7s a

ill. ab. L1xL2

Emax

Emed

10 m 19x19 m 48,77 lux 23,67 lux

a 19 m

L1 L2

HST-DE 70 W Rx7s a

ill. ab. L1xL2

Emax

Emed

8 m 15x15 m 48,92 lux 27,81 lux

a 15 m

L1 L2

146

iRoad design J. M. Wilmotte

iGuzzini

Application of the various types of poles/arms, in single, double, wallmounted, and intermediate versions. The mechanical resistance of the entire system is guaranteed only by original iGuzzini components.

sales order

The commercial order should be completed based on the elements making up the system.

pole with arm

optical assembly

The pole is available in two versions, with fixing plate or for burying. 147

iRoad

Optical assembly opens easily

Removable plate

Decompression valve

DIRECT LIGHTING SYSTEMS FOR URBAN AREAS WALL SYSTEMS FOR URBAN AREAS

iGuzzini

• Direct lighting system, for use with metal and sodium halide lamps. • Installed on a pole or wall-mounted. • The fixture has the following major components: optical assembly, pole, overhanging arm (single or double), intermediate arm, and wall-mount attachment. • Optical assembly and frame in aluminium alloy, with dual chromium plating, followed by passivation heat treatment at 120° C, acrylic RAL 9007 paint finish. Sodiumcalcium tempered sealing glass with customized silk-screening. The frame is fastened to the optical assembly with two stainless steel captive screws and a hinge system that allows it to be easily opened. 99,5% ultrapure aluminium reflector, 5-6 micron double high-bright finish, with an anodizing treatment. Vertical orientation with a graduated scale. Reflector group secured with captive screws. Porcelain lamp holder secured with anodized aluminium supports and cables with quick-connecting terminals. The lamp is equipped with an anti-loosening device. • When opening the optical assembly the decompression valve eliminates the internal depression. • Pull-out control gear plate made of

anodized aluminium. Power supply with ballast, non-explosive power factor correction capacitor, quick-connecting terminals. A disconnecting switch with fuse is available upon request. Versions with CPO-TW lamp complete with electronic power supplies. • Double insulation and ready for Class I grounding. • Thanks to the adjustability of the optical assembly, there is no light dispersion into the upper hemisphere above this luminaire. • All external screws are stainless steel AISI 304. • Pole is equipped with a single or a double arm. To be ordered separately. • Arms for wall-mounting, or for intermediate installation on poles with D=159mm, made of die-cast aluminium and galvanized steel sheet, with a liquid RAL 9007 acrylic paint treatment. • The technical characteristics of the fitting comply with EN60598-1 standard. • IP66 IK08 • F seal • ENEC approval • Class of Insulation II (with provisions for Class I upon request) Photo: José Hevia

design J. M. Wilmotte

Two entries for cables

Class II,Class II, with provisions for Class I (upon request)

148

Andorra La Vella - Andorra: City street

Disconnecting switch and fuse upon request

iRoad design J. M. Wilmotte

DIRECT LIGHTING SYSTEMS FOR URBAN AREAS WALL SYSTEMS FOR URBAN AREAS

iGuzzini Registered Design

optic

Q/ /$

Â&#x192; 635($' QDUURZ 7+52: VKRUW 6/, ',1 .% &(1 * '

+,7 '( 5[ V

Â&#x192; ,PD[ FG .OP

& J Â&#x192; &,( Â&#x192;

Â&#x192;

Â&#x192; ,PD[ FG .OP

& J Â&#x192; &,( Â&#x192;

Â&#x192;

,PD[ FG .OP

& J Â&#x192; Â&#x192;

Â&#x192;

313

585 214

A45Â° A45Â° A45Â° A45Â° A45Â° A45Â°

Q/ /$

Â&#x192; 635($' QDUURZ 7+52: VKRUW 6/, ',1 .% &(1 * '

+,7 &'0 7 *

Asymmetrical optic 45Â° B407 70 W HIT-DE 70 W HST-DE B408 150 W HIT-DE 150 W HST-DE B410* 140 W HIT (CPO-TW) B409 250 W HIT (G12)

Q/ /$

Â&#x192; 635($' QDUURZ 7+52: VKRUW 6/, ',1 .% &(1 * '

&32 7: 3*=

129

& J Â&#x192; &,( Â&#x192;

Â&#x192;

* Complete with electronic power supply :

Â&#x192; ,PD[ FG .OP

585 313

7+52: VKRUW 6/, &(1 * '

+67 '( 5[ V

IP66 IK08

Q/ /$

Â&#x192; 635($' QDUURZ

129

& J Â&#x192; &,( Â&#x192;

Â&#x192;

183

214

,PD[ FG .OP

ST ST ST ST ST ST

lamp

183

code

Road Optic B403 70 W HIT-DE 70 W HST-DE B404 150 W HIT-DE 150 W HST-DE B406* 140 W HIT (CPO-TW) B405 250 W HIT (G12)

Â&#x192; +,7 '( 5[ V

Â&#x192; Â&#x192;

,PD[ FG .OP

IP66 IK08

* Complete with electronic power supply

& J Â&#x192; Â&#x192;

Â&#x192;

Â&#x192; +67 '( 5[ V

Â&#x192; Â&#x192;

,PD[ FG .OP

& J Â&#x192; Â&#x192;

Â&#x192;

Â&#x192; &32 7: 3*=

'XPP\ Â&#x192;

,PD[ FG .OP

& J Â&#x192; Â&#x192;

Â&#x192;

Â&#x192; +,7 &'0 7 *

Â&#x192; Â&#x192;

149

10000

8000

6000

All compositions illustrated can be obtained by combining the single elements presented in the tables.

380

313

scalescala 1:100 1:100

2100

1450

2800

ø160

colour

0246

1200

door key code

1000

310x95

150 350

L=500 ø 18

hole foro ø 153

310

100

terminal box code colour poles 1530 1531 1532 1533 1534 1535 1863 00 1536 1537 1538 1539 1540 1541

800

6000

620

200 fixing plate contropiastra

160

BG42 BG43 + + BZG0 BZG0

W-Saving: maximum nominal power of the lamp up to 250 W. The components that are necessary for the operation of the fittings must be ordered separately. They are presented on page 262.

code wall mounting

127

code

colour

code

colour

1128

1129

length

160

code

74 6000

length

colour

6800

1536 160 1539

colour

6800

1530 1533

The intermediate arm is suitable for installation on all poles.

150

single

intermediate arm

double

70/150

W-Saving ø pole 230 V 220 V

197

HST-DE

197

lamp

74 6000

Fixing plate with anchoring bolts code 0453 for poles code 1533-1539

iRoad design J. M. Wilmotte

313

DIRECT LIGHTING SYSTEMS FOR URBAN AREAS WALL SYSTEMS FOR URBAN AREAS

iGuzzini

2800

1450

2800

620

1200

ø160

1200

ø160

8000

D - CH

10000

accessories for European poles code h pole 6000 B943* 8000 10000

The poles featured in the tables are suitable for fixing on I, F and E. For other countries, add the specific fixing systems featured in the table. * **

1000

code

74 8000

1534 ø

length

160 1540

colour 74

8000

Fixing plate with anchoring bolts code 1165 for poles code 1534-1540.

length

160

code

74 10000

length

colour

11000

1538 160 1541

colour

11000

1535

9000

1537

1532

code

size

colour 184

160

code

colour

9000

base for pole

length

single

The base for pole is suitable for installation on all poles.

300 fixing plate contropiastra

double

single

code 1531

100

440

440 50

300 fixing plate contropiastra

6000 B944** 8000 10000

L=500 ø 24

hole foro ø 151 ø 151

100

1000

150 350

1000 150 350

1000

L=500 ø 24

hole foro ø 153 ø 153

double

310x95

DIN guide for D and CH Marine grade plywood support for terminal board for GB

1842

ø 620

For installations with plates, outer anchoring plates and anchors are available and can be ordered separately.

10000

Fixing plate with anchoring bolts code 1165 for poles code 1535-1541.

151

iRoad design J. M. Wilmotte

DIRECT LIGHTING SYSTEMS FOR URBAN AREAS WALL SYSTEMS FOR URBAN AREAS

iGuzzini

B404

B403 /X[ K P D Â&#x192;

/X[ K P D Â&#x192;

+67 '( 5[ V :

+,7 '( 5[ V :

B405

B406 /X[ K P D Â&#x192;

/X[ K P D Â&#x192;

&32 7: 3*= :

+,7 &'0 7 * :

B408

B407 /X[ K P D Â&#x192;

/X[ K P D Â&#x192;

+,7 '( 5[ V :

+67 '( 5[ V :

B409

B410 /X[ K P D Â&#x192;

/X[ K P D Â&#x192;

&32 7: 3*= :

+,7 &'0 7 * :

152

iRoad poles iGuzzini

• Flush 310x95mm access cover made of aluminium alloy and has a watertight gasket. • 4-pole terminal block with three connections for each pole and double integrated fuse; designed for 16mm2 feed cables and 2,5mm2 exit cables that connect the lamp. • Suitable for terminal blocks that are Italian, French, Spanish (only small), and English (with B944 marine grade plywood adapter that can be ordered separately), and German/Swiss (with B943 DIN guide that can be ordered separately). • Internal grounding system with grounding lug, steel insert, and stainless steel screw. • Equipped with single or double arm, with respective lengths of 1450 mm and 2800 mm. The vertical part of the arm is made of 100x20mm steel profile. The horizontal part of the arm is made of steel sheet with hot galvanized cover. Texturized RAL 9007 acrylic paint surface treatment. • Arms secured to pole via 4 M10 UNI5931 AISI 304 stainless steel screws. • IP44

Flush inspection lid IP44 suitable for terminal boards UK-F-CH-E-I

Plate with slot

Photo: Giuseppe Saluzzi

• Supplied in versions with a baseplate and for cementing directly into the ground. Available in the following lengths 6 m, 8 m and 10 m (length includes arm). • Poles made of EN10025-S235JR hot galvanized 70 micron steel in compliance with UNI EN ISO 1461 (EN 40-5) standards. • Texturised RAL 9005 powder-coating paint surface finish. • The pole has a cylindrical cross section with a 159 mm diameter • A metallic galvanized steel plate is secured to the upper portion of the pole. It has holes for the fastening of the arms. At about 4 m above ground, there are two perforations and stainless steel inserts that secure the intermediate arm. • The h=6/8m above the ground is 3m thick; the 10m above the ground pole is 4 mm thick • The model that can be cemented into the ground has a cable slot that is 150x50mm. • Anchoring plate is made of 70 micron hot galvanized steel, and has 4 slots. The plate has tie rods that secure it to the ground (to be ordered separately).

Pescara - Italy: Piazza della Rinascita

design J. M. Wilmotte

Arm connected flush with pole

153

Flaminia B

Flaminia A

154

Flaminia System design Jan Wickelgren

iGuzzini

Flaminia A

The Flaminia project is characterised by the combination of different cultures and experiences. Flaminia was designed for public and urban illumination. The project was developed based on the idea of two families of fittings Flaminia A and Flaminia B having the same design concept, but different functions and possible applications. The depth of the range, in association with column personalisation and essential design, allows for

developing application projects that are consistent for the style of the luminaires, but different for the quality of lighting performance. The louvre and accessories increase visual comfort and eliminate light dispersion. Street, symmetrical and asymmetrical optics guarantee the highest confluence between performance and aesthetic requirements.

Decorative headpiece - down version

Opaline diffuser available upon request

Glass cone

W-Saving: automatic flow regulator

155

Flaminia System design Jan Wickelgren

Road Optic (ST) The road optic allows for a greater centre-to-centre distance between the poles and therefore a reduction in the number of fittings, less visual impact, and a decrease in purchase costs. Further advantages in the use of street optics are less maintenance and more energy saving. The optics available in the versions with polemounted collar and with arm - can be installed upward and downward.

iGuzzini

HIT-DE 150 W Rx7s a

0,5 m 1 m

Lmed TI%

0,45

0,50

1,56

2,00

0,49

0,45

1,18

1,00

Uo UL 8m

Symmetrical Optic (S) Symmetrical optics permit distributions in all directions with highly uniform lighting values.

HIT-DE 70 W Rx7s h

ill. ab. L1xL2

Emax

Emed

4,5 m 20x10 m 40 lux

19 lux

10 m

6 m 24x12 m 27 lux

16 lux

12 m

7 m 30x15 m 20 lux

11 lux

14 m

L1 L2

Asymmetrical Optic (A) Asymmetrical optics permit directing the light flow along precise reference directrixes.

HIT-DE 70 W Rx7s a

ill. ab. L1xL2

Emax

Emed

8 m 19x19 m 85 lux

26 lux

12,6 m

L1 L2

Louvre The variable-geometry louvre against lighting pollution was born out of the need for visual comfort and energy saving.

HIT (CDO-TT) 100 W E40 a

ill. ab. L1xL2

Emax

Emed

4,5 m 10x10 m 25 lux

16 lux

10 m

6 m 10x10 m 14 lux

11 lux

10 m

L1 L2

Glass cone The use of the glass cone with a stripe RAL9007 in the middle allows for soft and diffused lighting performance and eliminates any direct glare from the light source.

HIT (CDO-TT) 150 W E40 a

ill. ab. L1xL2

Emax

Emed

4,5 m 10x10 m 28 lux

21 lux

10 m

6 m 12x12 m 18 lux

14 lux

12 m

L1 L2

156

Flaminia System iGuzzini

Photo: Hans Schlupp

design Jan Wickelgren

Tang Shan City - China: Tang Shan Eartquake Monument Square Architectural project: Simon Kwan & Associates Ltd. Beijing Hua Te Architecture Desig & Consultant C

157

The optical assembly of the Flaminia system can be applied either to the top of the pole or by means of a single/double/intermediate arm.

The pole is available in two versions, with fixing plate or for burying.

158

Flaminia System design Jan Wickelgren

iGuzzini

The pole-top application is possible on poles with terminals Ă¸ 60 mm. For poles Ă¸ 76 and Ă¸ 102 mm adapters are available for the application.

The optical assembly of the Flaminia system can be wall mounted on arms L=600 mm and L=900 mm

sales order The commercial order should be completed based on the elements making up the system.

palo pole

braccio arm

vanoassembly ottico optical

159

Flaminia A

DIRECT LIGHTING SYSTEMS FOR URBAN AREAS WALL SYSTEMS FOR URBAN AREAS

iGuzzini

• Direct lighting system, for use with metal halide and sodium discharge lamps. • Fixture can be installed on a pole or wall-mounted. • Fitting has an optical assembly, arm (single or double) and pole. • Optical assembly in EN1706AC 46100LF aluminium alloy, with dual phosphorus-chromium plating of the base metal, followed by passivation heat treatment at 120° C, RAL 9007 liquid painting, curing at 150° C; silicone gasket subjected to a postcuring. 99.9% pure aluminium sheet reflector subjected to double process high-bright finish of 5 –6 micron; tear-resistant cable clamp; sodium-calcium tempered sealing glass, 4 mm thick, and transparent. Injection-moulded polycarbonate (D=340 mm H=663 mm) diffuser with bump-guarding edges, stabilized for UV resistance. Steel captive screws; extruded aluminium interior rod for cables. The lamp holder is secured with captive screws. Optical assembly can be installed as a pole top on a 60 mm diameter pole. Adapters are available for poles of other diameters and can be ordered separately.

• Pull-out control gear plate, made with hot galvanized EN10142 DX 51D+Z(ZF) steel sheet, degreased; power supply with a non-explosive power factor correction capacitor, starter, quick-connecting terminals. A disconnecting switch with fuse is available upon request. • All screws are A2 stainless steel. • EN1706AC 43100SF Aluminium alloy arm (single or double), with a texturised powder-coating paint surface finish, available in different lengths. Secured to the pole with 4 mounting positions. • The technical characteristics of the fitting comply with EN60598-1 standard. • IP66 IK08 • F seal • ENEC approval • Class of Insulation II

No upward emission of light flow

Removable plate with disconnecting switch and fuse

Recanati (Mc) - Italy: Road and street lighting

Photo: Giuseppe Saluzzi

design Jan Wickelgren

160

Optical assembly with captive screws

Anti-vandalism diffuser

Flaminia A design Jan Wickelgren

DIRECT LIGHTING SYSTEMS FOR URBAN AREAS WALL SYSTEMS FOR URBAN AREAS

iGuzzini Registered Design

lamp

optic ,PD[ FG .OP & J Â&#x192; &,(

Â&#x192;

7+52: VKRUW 6/, ',1 .% &(1 * '

ST :

IP66 IK08

+,7 '( 5[ V

Q/ /$

Ă¸ 340

Â&#x192; 635($' QDUURZ

663

code

Optical assembly - up B045 70 W HIT-DE 70 W HST-DE B048 150 W HIT-DE 150 W HST-DE

Â&#x192; ,PD[ FG .OP & J Â&#x192; &,( Â&#x192;

Â&#x192;

Optical assembly - up B046 70 W HIT-DE 70 W HST-DE B049 150 W HIT-DE 150 W HST-DE

Â&#x192; ,PD[ FG .OP

Â&#x192;

& J Â&#x192; &,( Â&#x192;

Â&#x192; ,PD[ FG .OP Â&#x192;

& J Â&#x192; &,( Â&#x192;

+,7 '( 5[ V

Â&#x192; ,PD[ FG .OP Â&#x192;

: +,7 '( 5[ V

/$ 635($' DYHUDJH

Â&#x192; 7+52: VKRUW 6/, ',1 .% &(1 * '

A :

Q/ /$

Â&#x192; 635($' QDUURZ 7+52: VKRUW 6/, ',1 .% &(1 * '

+,7 '( 5[ V

Q/ /$

Â&#x192; 635($' QDUURZ 7+52: VKRUW 6/, ',1 .% &(1 * '

+,7 '( 5[ V

,PD[ FG .OP

IP66 IK08

& J Â&#x192; &,( Â&#x192;

IP66 IK08

Optical assembly - up B047 70 W HIT-DE 70 W HST-DE B050 150 W HIT-DE 150 W HST-DE

7+52: VKRUW 6/, ',1 .% &(1 * '

+,7 '( 5[ V

Q/ /$

Â&#x192; 635($' QDUURZ

& J Â&#x192; &,( Â&#x192;

/$ 635($' DYHUDJH

Â&#x192; 7+52: VKRUW 6/, ',1 .% &(1 * '

Â&#x192;

161

Flaminia A design Jan Wickelgren

DIRECT LIGHTING SYSTEMS FOR URBAN AREAS WALL SYSTEMS FOR URBAN AREAS

iGuzzini Registered Design

lamp

optic ,PD[ FG .OP & J Â&#x192; &,(

Â&#x192;

7+52: VKRUW 6/, ',1 .% &(1 * '

ST :

IP66 IK08

+,7 '( 5[ V

Q/ /$

Â&#x192; 635($' QDUURZ

Â&#x192; ,PD[ FG .OP & J Â&#x192; &,(

Â&#x192;

Â&#x192; ,PD[ FG .OP

Â&#x192;

& J Â&#x192; &,( Â&#x192;

Â&#x192;

/$ 635($' DYHUDJH

Â&#x192; 7+52: VKRUW 6/, ',1 .% &(1 * '

+,7 '( 5[ V

,PD[ FG .OP

162

7+52: VKRUW 6/, ',1 .% &(1 * '

+,7 '( 5[ V

Q/ /$

Â&#x192; 635($' QDUURZ

Â&#x192; ,PD[ FG .OP

IP66 IK08

& J Â&#x192; &,( Â&#x192;

+,7 '( 5[ V

Q/ /$

Â&#x192; 635($' QDUURZ 7+52: VKRUW 6/, ',1 .% &(1 * '

+,7 '( 5[ V

,PD[ FG .OP

Optical assembly - down B053 70 W HIT-DE 70 W HST-DE B056 150 W HIT-DE 150 W HST-DE

& J Â&#x192; &,( Â&#x192;

IP66 IK08

Q/ /$

Â&#x192; 635($' QDUURZ 7+52: VKRUW 6/, ',1 .% &(1 * '

+,7 '( 5[ V

Optical assembly - down B052 70 W HIT-DE 70 W HST-DE B055 150 W HIT-DE 150 W HST-DE

Â&#x192;

& J Â&#x192; &,( Â&#x192;

/$ 635($' DYHUDJH

Â&#x192; 7+52: VKRUW 6/, ',1 .% &(1 * '

Â&#x192;

663

code

Optical assembly - down B051 70 W HIT-DE 70 W HST-DE B054 150 W HIT-DE 150 W HST-DE

Ă¸ 340

Flaminia A design Jan Wickelgren

DIRECT LIGHTING SYSTEMS FOR URBAN AREAS WALL SYSTEMS FOR URBAN AREAS

iGuzzini

B045

B048

/X[ K P D Â&#x192;

+,7 '( 5[ V :

B046

B049

/X[ K P D Â&#x192;

+,7 '( 5[ V :

B050

B047 /X[ K P D Â&#x192;

/X[ K P D Â&#x192;

+,7 '( 5[ V :

B051

B054

/X[ K P D Â&#x192;

+,7 '( 5[ V :

B052

B055

/X[ K P D Â&#x192;

+,7 '( 5[ V :

B056

B053 /X[ K P D Â&#x192;

/X[ K P D Â&#x192;

+,7 '( 5[ V :

163

7000

6000

4500

All compositions illustrated can be obtained by combining the single elements presented in the tables.

scale 1:100

2142

1754 poles optical assembly

663

down

663

ø 340

600

code

code colour

1297

1293

ø 102 h 5100

ø 102 h 4500

1298

1294 ø 102 h 6000

1299

1295

ø 102 h 7800

ø 102 h 7000

1297

1293

ø 102 h 5100

ø 102 h 4500

1298

1294

ø 102 h 6800

ø 102 h 6000

1299

1295

ø 102 h 7800

ø 102 h 7000

2744 adapter

arms

with buried plate

ø 102 h 6800

2136

600

900

1500

code

B116

B122

B125

B117

B123

B116

B122

B125

B117

B123

B126

B119

B116

B125

B117

B119

B116

B122

B125

B117

B123

B116

B122

B125

B117

B123

B126

B119

B116

B125

B117

B126

B119

colour code colour

1536 arms for wall luminaire 600

900

code

colour

B130

B127

B128

B127

B128

Pole-top installation is possible with poles with ø 60 mm end part. Adapters code B130 are available on demand for ø 102 mm poles. Adapters code B129 and arms are available on demand for ø 76 mm poles.

optical assembly optic ST

optic A

B046

B047

B045

optic S

B048

B052

B050 B053

down

B051

B049

B054

164

B055

B056

lamp 70 W

HIT-DE

70 W

HST-DE

150 W

HIT-DE

150 W

HST-DE

70 W

HIT-DE

70 W

HST-DE

150 W

HIT-DE

150 W

HST-DE

socket

intermediate colour colour Anti-glare cylinder* colour cap**

B956 Rx7s

15 B928

* The cylindrical accessory increases the level of visual comfort perceived in the observation of the diffuser. ** To be used only with the optical assembly pointing downwards

Flaminia A design Jan Wickelgren

2136

terminal box

door key

code colour poles*

1293 1294 1295 1297 1298 1299

code

0246

1007

1152

HST-DE

70/150

BG42 BG43 + + BZG0 BZG0

140

ø102

W-Saving: maximum nominal power of the lamp up to 250 W. The components that are necessary for the operation of the fittings must be ordered separately. They are presented on page 262.

ø102

4500

1016

W-Saving ø pole 230 V 220 V

lamp

colour

340

1734

6000

1754

7000

1863

DIRECT LIGHTING SYSTEMS FOR URBAN AREAS WALL SYSTEMS FOR URBAN AREAS

iGuzzini

120x400

1105 800

310

ø 100

hole foro øø125 125

ø 100

800

600

310

ø 100

hole foro ø125 ø 125

L=500 ø 18

200

contropiastra fixing plate

length

colour

code

length

colour

code

length

colour

7000

1297

102

5100

1298

102

6800

1299

102

7800

4500

1293

102

4500

1294

102

6000

1295

102

7000

6000

code

colour

poles

0453 0000

1293

code

colour

poles

0453 0000

1294

fixing platewith anchoring bolts

code

7000 * **

L=500 ø 18

6000

fixing platewith anchoring bolts

D - CH GB

B945**

L=500 ø 18

hole foro øø125 125

h pole (Above the ground)

4500 B943*

1105

640

The poles featured in the tables are suitable for fixing on I, F and E. For other countries, add the specific fixing systems featured in the table.

code

120x400

code

colour

poles

0453 0000

1295

DIN guide for D and CH Marine-wood support for terminal board for GB

165

Flaminia B design Jan Wickelgren

DIRECT LIGHTING SYSTEMS FOR URBAN AREAS WALL SYSTEMS FOR URBAN AREAS

iGuzzini

Pieve di Soligo (Tv) - Italy: Via Garibaldi

Photo: Giuseppe Saluzzi

• Diffused lighting system, for use with metal halide and sodium discharge lamps. • Fixture can be installed on a pole or wall-mounted. • Fitting has an optical assembly, arm (single or double) and pole. • Optical assembly in aluminium alloy EN1706AC 46100LF, with dual phosphorus-chromium plating of the base metal, followed by passivation heat treatment at 120° C, liquid painting RAL 9007, curing at 150° C; silicone gasket subjected to postcuring; louvered pre-anodized aluminium diffuser, pre-painted black; tear-resistant cable clamp. Injection- moulded polycarbonate diffuser (D=340 mm H=663 mm) with bump-guard stabilized to resist UV rays. Steel captive screws. Lamp holder secured with captive screws. Optical assembly can be installed as a pole top on a 60 mm diameter pole. Adapters are available for poles of other diameters and can be ordered separately. • Pull-out control gear plate, made of hot galvanized steel EN10142 DX 51D+Z(ZF), and degreased; power supply with a non-explosive power factor correction capacitor, starter, and quick-connecting terminals. A disconnecting switch with fuse is available upon request. • All screws are A2 stainless steel. • Arm (single or double) made of aluminium alloy EN1706AC 43100SF, texturised powder-coating paint surface finish, available in different lengths, secured to the pole with 4 mounting positions. • The technical characteristics of the fitting comply with EN60598-1 standard. • IP66 IK08 • F seal • ENEC approval • Class of Insulation II

Louvre designed to limit upward light flow < 3%

166

Removable plate with disconnecting switch and fuse on request

Anti-vandalism diffuser

Flaminia B design Jan Wickelgren

DIRECT LIGHTING SYSTEMS FOR URBAN AREAS WALL SYSTEMS FOR URBAN AREAS

iGuzzini Registered Design

Photometric data refers to optical assembly in association with louver to be ordered separately optic ,PD[ FG .OP Â&#x192; Â&#x192;

IP66 IK08

Â&#x192; ,PD[ FG .OP Â&#x192; Â&#x192;

',1 .% &(1 * '

Â&#x192; ,PD[ FG .OP Â&#x192; Â&#x192;

7+52: VKRUW 6/, ',1 .% &(1 * '

Â&#x192; ,PD[ FG .OP Â&#x192; Â&#x192;

',1 .% &(1 * '

Â&#x192; ,PD[ FG .OP Â&#x192; Â&#x192;

&,( /$ 635($' QDUURZ

Â&#x192; 7+52: VKRUW ',1 .% &(1 * '

+67 (

Ă¸ 340 Â&#x192;

,PD[ FG .OP Â&#x192; Â&#x192;

IP66 IK08

&,( /$ 635($' EURDG

Â&#x192; 7+52: VKRUW

+,( &'2 (7 (

Optical assembly - down B065 70 W HST 70 W HIT (CDO-TT) 70 W HSE 70 W HIE (CDO-ET) B067 100 W HST 100 W HIT (CDO-TT) 100 W HSE 100 W HIE (CDO-ET) B072 150 W HST 150 W HIT (CDO-TT) 150 W HSE 150 W HIE (CDO-ET)

&,( Q/ /$

Â&#x192; 635($' EURDG

+6( (

&,( /$ 635($' EURDG

Â&#x192; 7+52: VKRUW

+,7 &'2 77 (

Ă¸ 340

',1 .% &(1 * '

+67 (

&,( /$ 635($' EURDG

Â&#x192; 7+52: VKRUW

663

lamp

Optical assembly - up B065 70 W HST 70 W HIT (CDO-TT) 70 W HSE 70 W HIE (CDO-ET) B067 100 W HST 100 W HIT (CDO-TT) 100 W HSE 100 W HIE (CDO-ET) B072 150 W HST 150 W HIT (CDO-TT) 150 W HSE 150 W HIE (CDO-ET)

663

code

7+52: VKRUW ',1 .% &(1 * '

+,7 &'2 77 (

Â&#x192; ,PD[ FG .OP Â&#x192; Â&#x192;

&,( Q/ /$

Â&#x192; 635($' QDUURZ

7+52: VKRUW ',1 .% &(1 * '

+6( (

&,( Q/ /$

Â&#x192; 635($' QDUURZ

Â&#x192; ,PD[ FG .OP Â&#x192; Â&#x192;

&,( /$ 635($' QDUURZ

Â&#x192; 7+52: VKRUW ',1 .% &(1 * '

: +,( &'2 (7 (

Â&#x192;

167

6000

4500

3500

All compositions illustrated can be obtained by combining the single elements presented in the tables.

scale 1:100

891

340

2136

824

poles optical assembly

663

down

663

ø 340

600

code

code colour

1296

1250

ø 60 h 4100

ø 60 h 3500

1297

1293

ø 102 h 5100

ø 102 h 4500

1298

1294 ø 102 h 6000

1296

1250

ø 60 h 4100

ø 60 h 3500

1297

1293

ø 102 h 5100

ø 102 h 4500

1298

1294

ø 102 h 6800

ø 102 h 6000

979

arms

with buried plate

ø 102 h 6800

2142

600

900

adapter 900

900

1500

900

code

colour

B127

code

colour code colour

B114

B120

B116

B122

B125

B117

B123

B125

B117

B123

B126

B119

B114

B120

B116

B122

B125

B117

B123

B125

B117

B123

B126

B119

B130

arms for wall luminaire 600

code

1152

symmetrical baffle

optical assembly

code

lamp

B065

70 W HST / HIT (CDO-TT) / HSE / HIE (CDO-ET)

B067

100 W HST / HIT (CDO-TT) / HSE / HIE (CDO-ET)

B072

150 W HST / HIT (CDO-TT) / HSE / HIE (CDO-ET)

up/down

glass cone

aluminium intermediate protection screen*** cap**

socket colour code E27 E40

code colour code

B924 B925 B6

Use only opaque diffusing lamps with the baffle. * To be used with the baffle ** To be used only with the optical assembly pointing downwards *** To be used if the product is installed without any accessories (cone and baffle) in the UP position

168

asymmetrical screen *

B939 B940

code colour code colour code colour code colour

B931 B933 40

B932

B934 -

B929 -

B928

B935

Flaminia B design Jan Wickelgren

1152

824

terminal box

door key

code colour poles

1152

1250 1293 1294 1296 1297 1298

code

0246

1842

736

HST HSE

70/100 150

BG42 BG43 + + BZG0 BZG0

140

W-Saving: maximum nominal power of the lamp up to 250 W. The components that are necessary for the operation of the fittings must be ordered separately. They are presented on page 262.

ø102

ø60

3500

4500

2136

W-Saving ø pole 230 V 220 V

lamp

colour

2744

6000

1863

DIRECT LIGHTING SYSTEMS FOR URBAN AREAS WALL SYSTEMS FOR URBAN AREAS

iGuzzini

120x400

6000 * **

800

ø 100

600

310

ø 100

hole foro ø125 ø 125

200

contropiastra fixing plate

code

length

colour

code

length

colour

code

length

colour

1296

4100

1297

102

5100

1298

102

6800

1250

3500

1293

102

4500

1294

102

6000

code

colour

poles

1168 0000

1250

code

colour

poles

0453 0000

1293

fixing platewith anchoring bolts

4500 B945**

fixing platewith anchoring bolts

3500

L=500 ø 18

fixing plate contropiastra

fixing platewith anchoring bolts

D - CH

4500 6000

B944**

ø 100

(Above the ground)

L=500 ø 18

hole foro øø125 125

310

575 600

h pole 3500

B943*

L=400 ø 18

hole foro 93,6 øø93,6

310

code

640

100x300

The poles featured in the tables are suitable for fixing on I, F and E. For other countries, add the specific fixing systems featured in the table.

1105

120x400

code

colour

poles

0453 0000

1294

DIN guide for D and CH Marine-wood support for terminal board for GB

169

Flaminia B design Jan Wickelgren

DIRECT LIGHTING SYSTEMS FOR URBAN AREAS WALL SYSTEMS FOR URBAN AREAS

iGuzzini

B072 (HIT) + B939

B072 (HST) + B939 /X[ K P D Â&#x192;

/X[ K P D Â&#x192;

+67 ( :

+,7 &'2 77 ( :

/X[ K P D Â&#x192;

+6( ( :

+,( &'2 (7 ( :

B072 (HIT) + B940

B072 (HST) + B940 /X[ K P D Â&#x192;

/X[ K P D Â&#x192;

+67 ( :

+,7 &'2 77 ( :

B072 (HIE) + B940

B072 (HSE) + B940 /X[ K P D Â&#x192;

/X[ K P D Â&#x192;

+6( ( :

170

B072 (HIE) + B939

B072 (HSE) + B939 /X[ K P D Â&#x192;

+,( &'2 (7 ( :

Flaminia System poles iGuzzini

• Anchor bolts and plate (to be ordered separately) available in different sizes to fit the different sized poles. • Flush 400x120 or 300x100 mm access cover (for h = 3,5 m pole). • 4-pole terminal block with three connections for each pole and double integrated fuse; suitable for Italian/French/Spanish, English (with wood adapter that can be ordered separately), and German/Swiss (with DIN guide that can be ordered separately). Designed for 16mm2 feed cables and 2,5mm2 exit cables • Internal grounding system with grounding lug, steel insert, and M8x12stainless steel screw. • Access cover: IP30 • Terminal block: IP44 IK08

Photo: Giuseppe Saluzzi

• Supplied in flange or root mounted versions. H=3,5 m, 4,5 m, 6 m and 7 m models available. • Made of EN10025-S235JR, 70 micron hot galvanized steel as UNI EN ISO 1461 (EN 40-5) standards. • Texturised powder-coating paint surface finish. • The pole has a customized cylindrical cross-section with a 102 mm or a 60 mm diameter (for the h=3,5 m). • 4 mm thick. • The model that can be cemented into the ground has cable slot that is 150x50 mm. • The 280x280 mm anchoring plate is made of 70 micron hot galvanized steel.

Matera - Italy: Parco Castello Tramontano

design Jan Wickelgren

Installation of the arms with no holes

Flush inspection lid suitable for terminal board UK - F - CH - E

171

MultiWoody multiple supports page 203

FrameWoody page 195

Public spaces increasingly require lighting able to satisfy lighting needs while respecting the visual and design-based values of the relevant spaces and architecture. With the integration of 2010 news, “Compact” body and new arms for “CityWoody” and “MultiWoody” applications, Sistema Maxiwoody guarantees high project flexibility to meet any type of lighting requirements. In addition to multiple applications, this range offers a wide selection of optics, accessories, screens, as well as innovative light sources.

Large

Monochromatic LED version

172

Light management systems

W-Saving: automatic flow regulator

The very good emission quality, long lamp life, considerable energy saving and reduced CO2 emission of the CDM Elite MW lamp make MaxiWoody the ideal product to valorise building façades, monuments, parks, squares, retail areas and public spaces. LED sources with RGB, neutral white and warm white temperatures, create fascinating lighting directions; CPOTW lamps with street optic permit greater spacing between the posts, while CDM-T lamps with G12 socket offer bright emission and high chromatic rendering.

Medium

Small

Adjustable barn doors

Compact

Coloured filters

Large range of louvre

MaxiWoody System design Mario Cucinella

iGuzzini

The product has been awarded the following prize: - iF Design Award 2003

MultiWoody horizontal arms page 203

CityWoody page 189

MultiWoody page 203

173

MaxiWoody System design Mario Cucinella

Superspot Optic (SS) The use of this optic makes it possible to optimise definition of architectural features, eliminating stray light. It is ideal for long distance applications and highlighting features of reduced dimensions. • Highlighting of pilaster strips and columns by means of flat trajectory light. • Highlighting of architectural features by means of distanced positioning of projectors.

iGuzzini

HIT 70 W G12

ill. ab. ø

Emax

Emed

30 m

380 lux

290 lux

45 m

170 lux

125 lux

60 m

4,2 m

100 lux

72 lux

ill. ab. ø

Emax

Emed

150

210

ill. ab. ø

Emax

Emed

12 m

4,2 m

460 lux

350 lux

Spot Optic (S) Very high luminous intensity and super visual comfort. The spot optic is the ideal solution to illuminate and exalt structural sections. It ensures a better lighting performance than traditional solutions with tubular lamps. • It shows arches and structural elements of buildings and public areas from long distances.

HIT (CDM-T) 250 W G12

Medium Optic (M) It permits lighting of high façades from above, down or up, doubling the luminous intensity value on pedestrian areas from the top of the surrounding buildings with the same light cone. • Valorisation of towers and bell towers. • Valorisation of squares.

HIT (CDM-T) 150 W G12 ø

16 m

5,6 m

265 lux

200 lux

24 m

8,4 m

115 lux

95 lux

ill. ab. ø

Emax

Emed

Flood Optic (F) - WideFlood (WF) Optic designed to ensure the wide distribution of the luminous flow on the surface with very high glare control. The innovative spill-rings guarantee total visual comfort in the settings where it is used, without impairing luminous efficiency. • Valorisation of large façades of buildings near public areas or streets.

HIT (CDM-T) 250 W G12 ø

Emed = average lighting in the area Emax = imax lighting in the area

174

MaxiWoody System design Mario Cucinella

iGuzzini

Light Sliver Optic (L) The optic can be used to illuminate vertical architectural features. • Narrow lanes and streets. • Particularly high, narrow towers or bell towers. • Horizontal surfaces with accent lighting.

HIT (CDM-T) 150 W G12

ill. ab. L1xL2

Emax

Emed

12 m

12 x 2 m

500 lux

330 lux

16 m

16 x 3 m

280 lux

190 lux

24 m

24 x 4 m

126 lux

90 lux

ill. ab. L1xL2

Emax

Emed

12 m

14 x 6 m

170 lux

110 lux

16 m

19 x 8 m

100 lux

70 lux

24 m 28 x 11 m

43 lux

30 lux

Elliptical Optic (E) This optic combines the characteristics of the light sliver optic with those of the medium optic, and is suitable for illuminating both horizontal and vertical surfaces. • Squares and pedestrian areas in general. • Horizontal and vertical surfaces with soft lighting.

HIT (CDM-T) 150 W G12

Road Optic (ST) The street optics of the systems CityWoody and FrameWoody make it possible to have a greater distance between the poles, thus reducing the number of fittings needed and the visual impact, as well as purchase, maintenance and energy costs.

HST-DE 150 W Rx7s a

27 m

0,40

0,78

Lmed TI% 1,62

2,00

1 m 0,5 m

h Uo UL 6m

Road Optic (ST) This light source CPO-TW is especially studied for street optics and allows for larger spacing between poles, with a lower number of fittings, 20% luminance increase and 15% spacing increase.

CPO-TW a

140 W

9 m 36,5 m 0,41

0,51

Lmed TI% 1,20

8,00

1 m 0,5 m

h Uo UL 7m

175

MaxiWoody design Mario Cucinella

Direct dim (for RGB version)

Position locking and graduated scale

FLOODLIGHTS iGuzzini

Double cable clamp

Decompression valve

Siracusa - Italy: Hotel Minareto, Sicily

Photo: Gianfranco Guccione

• Direct LED lighting luminaire for use with metal halide, sodium discharge, and mercury discharge lamps. • The fixture is installed into the ground, wall-mounted (with a fisher) and for application on pole systems. • The fixture has an optical assembly (compact, small, medium or large) and support. • Optical assembly and frame in aluminium alloy; acrylic liquid paint surface finish which has a high resistance to atmospheric agents and UV sun rays; sodium-calcium tempered sealing glass, transparent colourless, 4 mm thick; secured with captive screws; stainless steel retention cable; 50-60 Shore A silicone gasket. • Superpure aluminium reflector. • Pull-out control gear plate, made of hot galvanized; aluminium alloy box and cover; spacers and captive screws; power supply with a non-explosive power factor correction capacitor, ballast, starter, and quick-connecting terminals. A disconnecting switch with fuse is available upon request. • Monochromatic LED version with 24/36-LED circuit, optics with plastic lenses, glass with customised serigraphy, and 100-265Vac 50/60Hz built-in electronic control gear. • RGB LED version with 36 multicolour LED circuit, DALI electronic control board, optics with plastic lenses, glass with customised serigraphy with electronic power supply

100-120/220-240Vac 50/60Hz. Retention cable

176

Slots allowing rainwater to run off

Accessory combination

Removable plate and captive screws

• DALI RGB LED versions are provided with RGB DIRECT DIM for dimming with standard button with the following functions: Soft ON/OFF, colour change, last colour memory, default dynamic sequence. • Available optics: Medium (M), Flood (F), WideFlood (WF), Elliptical (E), Spot (S), Superspot (SS), Asymmetrical longitudinal (AL), Blade of light (LL), Street (ST) and cycle path (ALo). • The floodlight can be adjusted vertically ±115° by means of a painted steel bracket with 10-step graduated scale and mechanical locking devices to guarantee the stability of the luminous flow and horizontally ±120° by means of a hot galvanised painted plate for ground installation. • Ready for pass-through cables with M24x1.5 double cable clamp made of nickel-plated brass (for cables with 7÷16mm diameter). • Stainless-steel external screws. • The technical characteristics of the fitting comply with EN60598-1 standard. • IP67 IK08 • F seal • ENEC approval • Class of Insulation II

MaxiWoody compact design Mario Cucinella

FLOODLIGHTS

iGuzzini Registered Design

optic ,PD[ FG

/X[ Â&#x192;

Â&#x192;

: :DUP

Â&#x192; /('

Â&#x192;

,PD[ FG

IP67 IK08

Neutral white = 4200K Warm white = 3100K

Complete of electronic power supply * On request available version

Â&#x192;

: :DUP

Â&#x192; /('

Â&#x192;

,PD[ FG

Â&#x192;

: :DUP

Â&#x192; /('

Floodlight complete with fixing bracket 6136 35 W HIT (G12) 6140 70 W HIT (G12)

Â&#x192; Â&#x192;

,PD[ FG .OP Â&#x192;

Â&#x192;

Â&#x192; +,7 &'0 7 * D Â&#x192;

Floodlight complete with fixing bracket 6137 35 W HIT (G12) 6141 70 W HIT (G12)

,PD[ FG .OP Â&#x192;

Â&#x192;

Â&#x192; +,7 &'0 7 * D Â&#x192;

Floodlight complete with fixing bracket 6138 35 W HIT (G12) 6142 70 W HIT (G12)

,PD[ FG .OP Â&#x192;

WF WF :

IP67 IK08

Â&#x192; +,7 &'0 7 * D Â&#x192;

Floodlight complete with fixing bracket 6139 35 W HIT (G12) 6143 70 W HIT (G12)

Â&#x192;

AL AL :

IP67 IK08

Â&#x192; +&, 7 *

Â&#x192; Â&#x192;

Â&#x192;

WF :

IP67 IK08

Â&#x192; 3/ 5 *5 T

Â&#x192;

,PD[ FG .OP Â&#x192;

TC-TEL TC-TEL TC-TEL

270

(PD[

G (P (PD[

(PD[

Â&#x192; 7& 7(/ *; T D Â&#x192;

G (P (PD[

(PD[

/X[ .OP Â&#x192;

IP67 IK08

/X[ .OP

,PD[ FG .OP

Floodlight complete with fixing bracket 6145 26 W 32 W 42 W

,PD[ FG .OP & J Â&#x192; /X[ .OP

Floodlight complete with fixing bracket 6144 14 W TC-TEL (PL-R) 17 W TC-TEL (PL-R)

/X[ .OP Â&#x192;

Â&#x192;

/X[ .OP Â&#x192;

M M

IP67 IK08

(PD[

/X[ .OP Â&#x192;

SS SS

IP67 IK08

& J Â&#x192; /X[ Â&#x192;

Â&#x192;

/X[ Â&#x192;

Â&#x192;

296

lamp

Floodlight with monochromatic LED complete with fixing bracket 6146* 24x1,2 W neutral white SS 6147 24x1,2 W warm white SS 6148* 24x1,2 W neutral white F 6149 24x1,2 W warm white F 6150* 24x1,2 W neutral white ALo 6151 24x1,2 W warm white ALo

Ă¸ 260

code

Â&#x192;

177

MaxiWoody compact design Mario Cucinella

FLOODLIGHTS

iGuzzini

accessories and installation systems code

code

Refractor for elliptical distribution of the light flow BZD8 for 6136-6137-6138-6139-6140-6141 6142-6143-6144 (14W)-6145 (26W)

Lamellar louvre BZE4 for 6136-6137-6138-6140-6141-6142 Available in colour 04

Available in colour 24 Glass diffuser BZD6 for 6136-6137-6138-6139-6140-6141 6142-6143-6144 (14W)-6145 (26W) Available in colour 65

Coloured filters BZD7 for 6136-6137-6138-6139-6140-6141 6142-6143-6144 (14W)-6145 (26W)

Cross-bladed louvre BZE5 for 6136-6137-6138-6140-6141-6142 Available in colour 04

Protection grid BZE6 Available in colour 78

Available in colours 05-06-09

Visor BZE9 for 6136-6137-6138-6140-6141-6142 6144-6145-6146-6147-6148 6149 6150-6151

Multiple support for two floodlights 6014 Available in colour 15

Available in colour 15 Cylindrical screen BZE7 for 6136-6140

Multiple support for three floodlights 6015 Available in colour 15

Available in colour 74

Single directional flap BZE8 for 6136-6137-6138-6140-6141-6142 6144-6145-6146-6147-6148 6149 6150-6151

Ground anchoring plate 5951 Available in colour 15

Available in colour 04 Circular louvre Cut-Off 45째 BZD9 for 6136-6140 BZE0 for 6137-6141 BZG7 for 6138-6142

Ground fixing system BZF0

Available in colour 04

Accessory retention cable BZF1

Circular louvre Full Comfort BZE3 for 6136-6137-6138-6140-6141-6142 Available in colour 04

178

Available in colour 00

MaxiWoody small body design Mario Cucinella

FLOODLIGHTS

iGuzzini Registered Design

optic

IP67 IK08

Neutral white = 4200K Warm white = 3100K

,PD[ FG

/X[ Â&#x192;

Â&#x192;

[ : 1HXWUDO

Â&#x192; /('

Â&#x192;

,PD[ FG Â&#x192;

[ : 1HXWUDO

Â&#x192; /('

Â&#x192;

,PD[ FG

Floodlight with LED with dynamic colour changes RGB DALI complete with fixing bracket BB32 72 W max 36 LED F

: /(' 5*%

IP67 IK08

Â&#x192;

Complete with electronic power supply and electronic DALI control card. Occupies 3 DALI addresses

Block diagram of Colour Quick system

Remote units

/('

(PD[

319

Transmission coefficient (K)

/X[ Â&#x192;

Â&#x192;

/X[ Â&#x192;

Â&#x192;

Complete with electronic power supply

358

lamp

Floodlight with monochromatic LED complete with fixing bracket BB28 36x1 W neutral white S BB29 36x1 W warm white S BB30 36x1 W neutral white F BB31 36x1 W warm white F

Ă¸ 315

code

Â&#x192;

Colour

White 6000K Cyan Orange Magenta Yellow Green Red Blue

1 0,41 1,09 0,78 1,03 0,88 1,26 0,15

Data refers to 6000K white light

Main unit

Components

Lighting luminaires

Colour Quick

Electronic power supply designed to mount on a DIN standard profile 220Ăˇ240V 24Vdc

MaxiWoody LED RGB is also compatible with other light control systems of the iGuzzini range illustrated in this catalogue.

code 9730 Available in colours 01 and 15

code 9908

max 64 (DALI loads) For the system definition, refer to the instructions

Remote control

MaxiWoody LED RGB (1 load/3 addresses DALI

code 9731 Available in colour 01

max 64

accessories and installation systems code

code

Visor 5940

Ground anchoring plate 5951

Available in colour 15

Single directional flap 5937

Accessory retention cable 5949

Available in colour 04

Available in colour 00

Protection grid 5943 Available in colour 78

179

MaxiWoody small body design Mario Cucinella

FLOODLIGHTS

iGuzzini Registered Design

optic Â&#x192;

Â&#x192;

/X[ .OP Â&#x192;

SS SS :

SS SS

Â&#x192; +,7 *

Â&#x192;

,PD[ FG .OP Â&#x192;

Â&#x192;

IP67 IK08

Â&#x192;

Â&#x192; +,7 &'0 7 * D Â&#x192;

,PD[ FG .OP Â&#x192;

Â&#x192;

(PD[

/X[ .OP Â&#x192;

Â&#x192; +,7 &'0 7 * D Â&#x192;

(PD[

IP67 IK08

Floodlight complete with fixing bracket 5652 70 W HIE/C 70 W HIE/M Floodlight without bracket for application on pole systems 5677 70 W HIE/C 70 W HIE/M

,PD[ FG .OP Â&#x192;

Â&#x192;

/X[ .OP Â&#x192;

SS M :

SS M

Â&#x192; +,( & (

Â&#x192;

,PD[ FG .OP Â&#x192;

Â&#x192;

IP67 IK08

Â&#x192;

Floodlight complete with fixing bracket 5653 70 W HST 70 W HIT (CDO-TT) Floodlight without bracket for application on pole systems 5678 70 W HST 70 W HIT (CDO-TT)

Â&#x192;

,PD[ FG .OP Â&#x192;

Â&#x192;

S SS

Â&#x192; D

Â&#x192;

,PD[ FG .OP Â&#x192;

Â&#x192;

IP67 IK08

Â&#x192; +,7 &'2 77 ( D Â&#x192;

,PD[ FG .OP Â&#x192;

Â&#x192;

F S

Â&#x192; D

Â&#x192;

,PD[ FG .OP Â&#x192;

IP67 IK08

Â&#x192;

Â&#x192; +,( &'2 (7 ( D Â&#x192;

,PD[ FG .OP Â&#x192;

Â&#x192; +,7 &'0 7 * D Â&#x192;

IP67 IK08

180

(PD[

/X[ .OP Â&#x192;

WF WF

/X[ .OP Â&#x192;

Floodlight complete with fixing bracket 5614 70 W HIT (CDM-T) Floodlight without bracket for application on pole systems 5615 70 W HIT (CDM-T)

(PD[

/X[ .OP Â&#x192;

F S

+6( (

/X[ .OP Â&#x192;

Floodlight complete with fixing bracket 5654 70 W HSE 70 W HIE (CDO-ET) Floodlight without bracket for application on pole systems 5679 70 W HSE 70 W HIE (CDO-ET)

/X[ .OP Â&#x192;

S SS

+67 (

/X[ .OP Â&#x192;

+,( 0 (

319

/X[ .OP

Floodlight complete with fixing bracket 5651 70 W HIT (CDM-T) Floodlight without bracket for application on pole systems 5676 70 W HIT (CDM-T)

Â&#x192;

319

358

,PD[ FG .OP

Ă¸ 315

lamp

Floodlight complete with fixing bracket 5650 70 W HIT 70 W HIT (CDM-T) Floodlight without bracket for application on pole systems 5675 70 W HIT 70 W HIT (CDM-T)

Ă¸ 315

code

MaxiWoody small body design Mario Cucinella

FLOODLIGHTS

iGuzzini Registered Design

optic ,PD[ FG .OP & J Â&#x192; &,(

Q/ /$

Â&#x192;

Â&#x192; 635($' QDUURZ 7+52: VKRUW 6/, ',1 .% &(1 * '

ST ST

: &32 7: 3*=

358

lamp

Floodlight complete with fixing bracket 5616* 60 W HST (CPO-TW) Floodlight without bracket for application on pole systems 5617 60 W HST (CPO-TW)

Ă¸ 315

code

319

Â&#x192;

IP67 IK08

Floodlight complete with fixing bracket 5684* 70 W HIT-DE 70 W HST-DE Floodlight without bracket for application on pole systems 5685 70 W HIT-DE 70 W HST-DE

Ă¸ 315

* To be applied to square FrameWoody luminaires and MultiWoody ,PD[ FG .OP

& J Â&#x192; &,(

Q/ /$

Â&#x192;

Â&#x192; 635($' QDUURZ

ST ST

+,7 '( 5[ V

Â&#x192; ,PD[ FG .OP

IP67 IK08

319

7+52: VKRUW 6/, ',1 .% &(1 * '

& J Â&#x192; &,(

Q/ /$

Â&#x192;

Â&#x192; 635($' DYHUDJH 7+52: VKRUW 6/, ',1 .%

* To be applied to square FrameWoody luminaires and MultiWoody

: +67 '( 5[ V

Â&#x192;

5616-5617

5684-5685 (HIT-DE)

/X[ K P D Â&#x192;

&32 7: 3*= :

+,7 '( 5[ V :

5684-5685 (HST-DE) /X[ K P D Â&#x192;

+67 '( 5[ V :

181

MaxiWoody small body design Mario Cucinella

FLOODLIGHTS

iGuzzini

accessories and installation systems code

code

Refractor for elliptical distribution of the light flow 1195 for 5614-5615-5650-5651-5652-5653 5654-5675-5676-5677-5678-5679

Lamellar louvre BZ23 for 5614-5615 Available in colour 04

Available in colour 24 Diffusing glass 1158 for 5614-5615-5650-5651-5652-5653 5654-5675-5676-5677-5678-5679

Cross-bladed louvre BZ24 per 5614-5615 Available in colour 04

Available in colour 65

Coloured filters 1158 for 5614-5615-5650-5651-5652-5653 5654-5675-5676-5677-5678-5679

Protection grid 5943 Available in colour 78

Available in colours 05-06-09

Visor 5940 for 5614-5615-5650-5651-5652-5653 5654-5675-5676-5677-5678-5679

Multiple support for two floodlights 6014 for floodlights complete with fixing bracket

Available in colour 15

Single directional flap 5937 for 5614-5615-5650-5651-5652-5653 5654-5675-5676-5677-5678-5679

Multiple support for three floodlights 6015 for floodlights complete with fixing bracket

Available in colour 04

Available in colour 15

Circular louvre 5952 for 5614-5615-5650-5651-5652-5653 5654-5675-5676-5677-5678-5679

Ground anchoring plate 5951 for 5614-5650-5651-5652-5653-5654

Available in colour 04

Circular louvre Cut-Off 60째 BZ09 for 5614-5615 Available in colour 04

Circular louvre Full Comfort BZ08 for 5614-5615 Available in colour 04

182

Available in colour 15

Accessory retention cable 5949 Available in colour 00

MaxiWoody medium body design Mario Cucinella

FLOODLIGHTS

iGuzzini Registered Design

optic Â&#x192;

Â&#x192;

/X[ .OP Â&#x192;

SS SS :

SS SS

Â&#x192; +,7 *

Â&#x192;

(PD[

Ă¸ 380

,PD[ FG .OP

427

lamp

Floodlight complete with fixing bracket 5658 150 W HIT 150 W HIT (CDM-T) Floodlight without bracket for application on pole systems 5680 150 W HIT 150 W HIT (CDM-T)

352 ,PD[ FG .OP Â&#x192;

Â&#x192;

IP67 IK08

/X[ .OP Â&#x192;

Â&#x192; +,7 &'0 7 * D Â&#x192;

(PD[

Ă¸ 380

code

352

Floodlight complete with fixing bracket 5659 150 W HIT (CDM-T) Floodlight without bracket for application on pole systems 5681 150 W HIT (CDM-T)

,PD[ FG .OP Â&#x192;

Â&#x192;

/X[ .OP Â&#x192;

Â&#x192; +,7 &'0 7 * D Â&#x192;

IP67 IK08

Floodlight complete with fixing bracket 5660 150 W HIE/C 150 W HIE/M Floodlight without bracket for application on pole systems 5682 150 W HIE/C 150 W HIE/M

,PD[ FG .OP Â&#x192;

Â&#x192;

/X[ .OP Â&#x192;

S M :

S M

Â&#x192; +,( & (

Â&#x192;

,PD[ FG .OP Â&#x192;

Â&#x192;

IP67 IK08

Â&#x192;

Floodlight complete with fixing bracket 5661 100 W HST (SDW-T)

Â&#x192;

,PD[ FG .OP Â&#x192;

Â&#x192;

Â&#x192; +67 3*

Floodlight complete with fixing bracket 5662 100 W HST (SDW-T)

Â&#x192;

,PD[ FG .OP Â&#x192;

Â&#x192;

Â&#x192; +67 3*

Floodlight complete with fixing bracket 5618 150 W HIT Floodlight without bracket for application on pole systems 5619 150 W HIT

Â&#x192;

,PD[ FG .OP

Â&#x192; +&, 7 *

Â&#x192;

(PD[

/X[ .OP Â&#x192;

Â&#x192;

(PD[

/X[ .OP Â&#x192;

IP67 IK08

/X[ .OP Â&#x192;

IP67 IK08

/X[ .OP Â&#x192;

+,( 0 (

Â&#x192;

IP67 IK08

183

MaxiWoody medium body design Mario Cucinella

FLOODLIGHTS

iGuzzini Registered Design

optic ,PD[ FG .OP

& J Â&#x192; &,(

Q/ /$

Â&#x192;

Â&#x192; 635($' QDUURZ 7+52: VKRUW 6/, ',1 .% &(1 * '

ST ST

: &32 7: 3*=

Ă¸ 380

lamp

Floodlight complete with fixing bracket 5620* 140 W HST (CPO-TW) Floodlight without bracket for application on pole systems 5621 140 W HST (CPO-TW)

Â&#x192;

IP67 IK08

352

Floodlight complete with fixing bracket 5666* 150 W HIT-DE 150 W HST-DE Floodlight without bracket for application on pole systems 5683 150 W HIT-DE 150 W HST-DE

,PD[ FG .OP

& J Â&#x192; &,(

Â&#x192; 635($' QDUURZ 7+52: VKRUW 6/, ',1 .% &(1 * '

ST ST

+,7 '( 5[ V

352

Â&#x192; ,PD[ FG .OP

IP67 IK08

& J Â&#x192; &,(

Q/ /$

Â&#x192;

Â&#x192; 635($' QDUURZ 7+52: VKRUW 6/, &(1 * '

* To be applied to square FrameWoody luminaires and MultiWoody

: +67 '( 5[ V

Â&#x192;

5620-5621

5666-5683 (HIT-DE)

/X[ K P D Â&#x192;

&32 7: 3*= :

5666-5683 (HST-DE)

+67 '( 5[ V :

+,7 '( 5[ V :

/X[ K P D Â&#x192;

184

Q/ /$

Â&#x192;

Ă¸ 380

* To be applied to square FrameWoody luminaires and MultiWoody

427

code

MaxiWoody medium body design Mario Cucinella

FLOODLIGHTS

iGuzzini

accessories and installation systems code

code

Refractor for elliptical distribution of the light flow 1196 for 5618-5619-5658-5659-5660-5661 5662-5680-5681-5682

Lamellar louvre BZ27 for 5618-5619 Available in colour 04

Available in colour 24 Diffusing glass 1159 for 5618-5619-5658-5659-5660-5661 5662-5680-5681-5682

Cross-bladed louvre BZ28 for 5618-5619 Available in colour 04

Available in colour 65

Coloured filters 1159 for 5618-5619-5658-5659-5660-5661 5662-5680-5681-5682

Protection grid 5944 Available in colour 78

Available in colours 05-06-09

Visor 5941 for 5618-5619-5658-5659-5660-5661 5662-5680-5681-5682

Multiple support for two floodlights 6014 for floodlights complete with fixing bracket

Available in colour 15

Single directional flap 5938 for 5618-5619-5658-5659-5660-5661 5662-5680-5681-5682

Multiple support for three floodlights 6015 for floodlights complete with fixing bracket

Available in colour 04

Available in colour 15

Circular louvre 5953 for 5618-5619-5658-5659-5660-5661 5662-5680-5681-5682

Ground anchoring plate 5951 for 5618-5658-5659-5660-5661-5662 Available in colour 15

Available in colour 04 Circular louvre Cut-Off 60째 BZ26 for 5618-5619 Available in colour 04

Accessory retention cable 5949 Available in colour 00

Circular louvre Full Comfort BZ25 for 5618-5619 Available in colour 04

185

MaxiWoody large body design Mario Cucinella

FLOODLIGHTS

iGuzzini Registered Design

optic ,PD[ FG .OP Â&#x192;

Â&#x192;

HIT

/X[ .OP Â&#x192;

IP67 IK08 :

Â&#x192; +,7 (

Floodlight complete with fixing bracket 5668 250 W

Â&#x192;

,PD[ FG .OP Â&#x192;

Â&#x192;

HIT

Â&#x192; +,7 (

Floodlight complete with fixing bracket 5669 250 W 250 W 250 W

Â&#x192;

,PD[ FG .OP Â&#x192;

Â&#x192;

HIE HSE HCI

F F F :

Â&#x192;

IP67 IK08

Â&#x192;

,PD[ FG .OP Â&#x192;

Â&#x192;

Â&#x192; D

Â&#x192;

,PD[ FG .OP Â&#x192;

Â&#x192;

Â&#x192; +,( +&, ( 3 ( D Â&#x192;

,PD[ FG .OP Â&#x192;

Â&#x192;

HST

Â&#x192; +67 (

Floodlight complete with fixing bracket 5622 250 W HIT (CDM-T)

Â&#x192;

,PD[ FG .OP Â&#x192;

Â&#x192;

Â&#x192; +,7 &'0 7 * D Â&#x192;

Floodlight complete with fixing bracket 5623 250 W HIT (CDM-T)

,PD[ FG .OP Â&#x192;

Â&#x192;

Â&#x192; +,7 &'0 7 * D Â&#x192;

,PD[ FG .OP

Floodlight complete with fixing bracket 5624 250 W HIT (CDM-T) WF

Â&#x192;

Â&#x192; +,7 &'0 7 * D Â&#x192; Â&#x192;

186

(PD[

& /X[ .OP Â&#x192;

IP67 IK08

/X[ .OP Â&#x192;

IP67 IK08

/X[ .OP Â&#x192;

IP67 IK08

/X[ .OP Â&#x192;

IP67 IK08

/X[ .OP Â&#x192;

Floodlight complete with fixing bracket 5670 250 W

(PD[

/X[ .OP Â&#x192;

+6( (

/X[ .OP Â&#x192;

+,( (

/X[ .OP Â&#x192;

IP67 IK08

Â&#x192;

G (P (PD[

Ă¸ 484

lamp

Floodlight complete with fixing bracket 5667 250 W

521

534

code

MaxiWoody large body design Mario Cucinella

FLOODLIGHTS

iGuzzini Registered Design

optic ,PD[ FG .OP Â&#x192;

Â&#x192;

HIT

/X[ .OP Â&#x192;

IP67 IK08 :

Â&#x192; +,7 (

Floodlight complete with fixing bracket 5672 400 W 400 W

Â&#x192;

,PD[ FG .OP Â&#x192;

Â&#x192;

HIT HST

Â&#x192; +,7 (

Â&#x192;

,PD[ FG .OP Â&#x192;

Â&#x192;

Floodlight complete with fixing bracket 5673 400 W

Â&#x192;

,PD[ FG .OP Â&#x192;

Â&#x192;

HIT

Â&#x192; +,7 (

Floodlight complete with fixing bracket 5674 400 W 400 W

Â&#x192;

,PD[ FG .OP Â&#x192;

Â&#x192;

HIE HSE

F F :

Â&#x192; +,( (

Â&#x192;

,PD[ FG .OP

Â&#x192; +6( (

Â&#x192;

(PD[

521

(PD[

/X[ .OP Â&#x192;

Â&#x192;

/X[ .OP Â&#x192;

IP67 IK08

(PD[

/X[ .OP Â&#x192;

IP67 IK08

/X[ .OP Â&#x192;

+67 (

/X[ .OP Â&#x192;

S SS

IP67 IK08

Ă¸ 484

lamp

Floodlight complete with fixing bracket 5671 400 W

534

code

Â&#x192;

187

MaxiWoody large body design Mario Cucinella

FLOODLIGHTS

iGuzzini

accessories and installation systems code

code

Refractor for elliptical distribution of the light flow 1197 for 5622-5623-5624-5667-5668-5669 5670-5671-5672-5673-5674

Circular louvre Cut-Off 60째 BZ30 for 5622-5623-5624 Available in colour 04

Available in colour 24 Diffusing glass 1160 for 5667-5668-5669-5670-5671-56725673-5674

Circular louvre Full Comfort BZ29 for 5622-5623-5624 Available in colour 04

Available in colour 65

Coloured filters 1160 for 5667-5668-5669-5670

Lamellar louvre BZ31 for 5622-5623-5624

Available in colours 05-06-09

Available in colour 04

Coloured filters available upon request code 1163 (for 5671-5672-5673-5674) Visor 5942 Available in colour 15

Cross-bladed louvre BZ32 for 5622-5623-5624 Available in colour 04

Single directional flap 5939

Protection grid 5945

Available in colour 04

Available in colour 78

Circular louvre 5954 for 5622-5623-5624-5667-5668-5669 5670-5671-5672-5673-5674

Ground anchoring plate 5951 Available in colour 15

Available in colour 04

Accessory retention cable 5949 Available in colour 00

188

CityWoody

LIGHTING PROJECTOR SYSTEMS FOR URBAN AREAS WALL SYSTEMS FOR URBAN AREAS

iGuzzini

• (Conical) poles are made of hot galvanized steel with 70 micron thickness painted with texturized powder paint, available in two heights: 4 and 7 metres off ground. • All external screws are made of A2 stainless steel. • The technical characteristics of the fitting comply with EN60598-1 standard. • IP67 IK08 • F seal • ENEC approval (except for LED versions) • Class of Insulation II

No upward emission of light flow

Rotation of the optical assembly (MaxiWoody small and medium body)

Photo: Giuseppe Saluzzi

• Poles and wall-mounted system for one or two MaxyWoody floodlights (Compact, Small and Medium body) for discharge lamps and LEDs. • The support arms are made of hot galvanised steel with 70 micron thickness with texturized liquid paint surface treatment. Pole-top versions are complete with stainless steel tie rods. • Various lengths available in pole and wall-mounted version; possibility to install one or two floodlights on poles. • The arms are fixed to the pole by means of a painted aluminium flange, the fixing system does not require pole drilling. • The floodlights can be tilted towards the street side and towards the sidewalk side.

Marina di Ravenna - Italy: Dock

design Mario Cucinella

Rotation of the optical assembly (MaxiWoody compact)

189

The possibility of combining arms, poles, flanges, projectors and accessories is the key to the great flexibility and adaptability of the system.

Compact body

Small body

Medium body

Applications with the various types of arms in single and double versions.

The system is available in three different sizes for the floodlight MaxiWoody without bracket

The intermediate arm, thanks to the adjustable angle of the projector, guarantees proper illumination of walkways in proximity to roads. The pole is available in two versions, with fixing plate or for burying.

190

CityWoody design Mario Cucinella

iGuzzini

Wall mounted installation, thanks to three different available lengths of arm, is the ideal solution in those areas where the use of poles is not possible.

sales order

The commercial order should be completed based on the elements making up the system.

pole

arm

floodlight

191

7200

4200

All compositions illustrated can be obtained by combining the single elements presented in the tables.

scale 1:100

799

1220

2086

724

793

CityWoody system can install optical assemblies with compact body, small body without bracket and medium body without bracket, also in LED versions. Floodlights are shown on page 176.

arms

6107

6108 920

6109 460

for MaxiWoody small body

460

6110 460

double

single

code

wall- mounting Intermediate

double wall- mounting Intermediate

for MaxiWoody compact body

single

arms

code

pole 7000

for MaxiWoody medium body

Circular louvre

Accessory retention cable

5981

5982 1000

5983* 500

Accessories compatible with CityWoody. The codes can be found on page 176.

5984 500

5985

5987 1200

5989 2400

5990 1800

wallmounting

Coloured filters

500

600

192

Elliptical light flow refractor

5994 600

*For installation on columns with code 1281-1283 (At a height of 4 m off the ground)

CityWoody design Mario Cucinella

LIGHTING PROJECTOR SYSTEMS FOR URBAN AREAS WALL SYSTEMS FOR URBAN AREAS

iGuzzini Registered Design

ø60

ø60 7000

W-Saving: maximum nominal power of the lamp up to 250 W. The components that are necessary for the operation of the fittings must be ordered separately. They are presented on page 262.

ø60

186x45

ø138

200 fixing plate contropiastra

code

length

1275

60-106

4600

1278

60-100

4000

code

ø 420

Fixing plate with anchoring bolts code 1168 for pole code 1278

colour 15

size

1870

200 fixing plate contropiastra

colour 15

code

length

1281

60-138

7800

1283

60-130

7000

code

size

1871

colour 15

colour 122

ø106

L=500 ø 18

hole foro ø 80 80

ø 100

L=400 ø 18

hole foro ø 80 80

1000

186x45

310

BG43 + BZC1

1000

The terminal blocks have four polarities with three ways for pole and are fitted for bridge wiring. They are made with class II insulation. Code 1862 is equipped with two fuse holders for dim. 8,5 x 31,5 - 380 V - max 20 A. Suitable for power cables with cross-section 16 mm2 on input and 2.5 mm2 on output to hook up with the light source. Code 1865 is equipped with two fuse holders for dim. 8,5 x 31,5 - 380 V - max 20 A. Suitable for power cables with cross-section 16 mm2 on input and 2.5 mm2 on output to hook up with the light source. Code 1864 is equipped with two fuse holders for dim. 5x20- 450 V - max 10 A. Suitable for power cables with cross-section 16 mm2 on input and 2.5 mm2 on output to hook up with the light source.

HSE

138

800

** Terminal block code 1865 can be supplied upon reques

base for pole

* The lids are of the protruding variety.

HST

122

70/150

ø60

800

0227

HST-DE

W-Saving 220 V

310

colour

ø pole

600

4000

1864

code

800

1862**

1281 1283 1275 1278

lamp

600

code colour poles*

door key

1180

2180

base for pole

terminal box

924

ø 100

2780

ø 420

Fixing plate with anchoring bolts code 0453 for pole code 1283

193

MaxiWoody System design Mario Cucinella

Photo: SHRPA - Peter Ehlers, Ole Mikael Sørensen

iGuzzini

Aalborg, Denmark Lights on the Aalborg waterfront Lighting project ÅF - Hansen & Henneberg Architectural and landscape project: C.F Møller Architects

194

FrameWoody design Mario Cucinella

LIGHTING PROJECTOR SYSTEMS FOR URBAN AREAS WALL SYSTEMS FOR URBAN AREAS

Caltagirone (Ca) - IItaly: Viale Mario Milazzo

Photo: Giuseppe Saluzzi

iGuzzini

50°

20°

α=15° α=15° 50°

30° 35°

• A direct lighting system of straight and cubical structures, which can be grouped together, for use with metal halide, sodium discharge and mercury discharge lamps. • Fixture can be installed on a pole or wall-mounted. • FrameWoody has an optical assembly (MaxiWoody small or medium version), a structure (straight or square) and a mounting pole. • Optical assembly and frame made of EN1706AC 46100LF aluminium alloy, with dual phosphorus-chromium plating of the base metal, followed by passivation heat treatment at 120° C, acrylic liquid paint surface finish which has a high resistance to atmospheric agents and UV sun rays, curing at 150° C. Sodium-calcium tempered sealing glass, transparent and colourless, 4 mm thick, secured with captive screws; Stainless steel retention cable, 1,2 mm diameter, 49 wires, with a natural finish; 50-60 Shore A silicone gasket, with a postcuring (in oven) time of 4 - 6 hours at 200° C. 99,98 % annealed ultrapure aluminium sheet reflector, subjected to degreasing, high-bright finish, and anodic treatment of 2-4 micron with nickel-salt bath; the lamp holder support is made of aluminium. The frame has slots for rainwater drainage. Double nickel-plated (M24x1,5) brass cable clamp; pressure reducing valve. Pressure reducing valve. • Pull-out control gear plate, made of hot galvanized EN10142 DX 51D+Z (ZF) steel sheet, degreased; painted EN1706AC 46100LF aluminium alloy box and cover. Spacers and captive screws; power supply with a non-explosive power factor correction capacitor, ballast, starter, and quick-connecting terminals. A disconnecting switch with fuse is available upon request. • All screws are A2 stainless steel. • Made of S235JR UNI 10025 hot galvanized 70 micron steel, with a polyester powder-coating paint surface finish, sustained by stainless steel tie rods hooked to the pole with die-cast aluminium flanges with a phosphorus-chromium plating. Available in a square version to hold spotlights equipped with support and a straight version for spotlights without rods; longitudinal adjustment (+50°/-20°), transversal (+35°/-30°) adjustment of the spotlights; 15° inclination in relation to the horizontal plane. • The technical characteristics of the fitting comply with EN60598-1 standard. • IP67 IK08 • F seal • ENEC approval • Class of Insulation II

20°

Rotations on linear supports

Rotations on square supports

Rotations on square support

195

The possibility of combining the structures with poles, optical assemblies and accessories makes for a highly flexible system.

Small body

Medium body

Applications with various combinations of elements available in the system. The mechanical resistance of the entire system is guaranteed only by the use of original iGuzzini components.

The system is available in two different sizes of the MaxiWoody floodlight

The pole is available in two versions, with fixing plate or for burying.

196

FrameWoody design Mario Cucinella

iGuzzini

Wall mounted installation enables the lighting designer to illuminate those outdoor areas where the use of poles is not possible.

sales order

The commercial order should be completed based on the elements making up the system.

pole

structure

floodlights

197

9000

7000

All compositions illustrated can be obtained by combining the single elements presented in the tables.

scale 1:100 scala 1:100

5675

5651

5676

5652

5677

5653

ø 315

5654

5679

5614

5615

5616

5617

5684

5658

5685

5659

5681

5660

5682

352 427

ø 380

70W HIT (CDM-T)

70W HIE/C (Osram)

70W HIE/M (Osram)

70W HIT (CDO-TT) 70W HSE

S SS F

70W HIE (CDO-ET)

70W HIT (CDM-T)

60W HST (CPO-TW)

70W HIT-DE

70W HST-DE

150W HIT (Osram)

150W HIT (CDM-T)

150W HIE/C (Sylvania)

150W HIE/M (Sylvania)

code

5661

100W HST (SDW-T)

5662

100W HST (SDW-T)

5618

5619

150W HIT (CDM-T)

5620

5621

140W HST (CPO-TW)

150W HIT-DE

5666

5683 150W HST-DE

structure

code

5956

5960

5958

5963

5959

5964

5680

ø 380

352

MaxyWoody medium body

5678

70W HST

structure

optic

code

5965

5966

5968

5973 5970

5978

5974 5971 5976

5972

5979

5980 5977

Codes with a grey background refer to floodlights without fixing brackets and are designed for linear versions. Floodlights are shown on pages 176. The system is compatible with MaxiWoody LED floodlights that can be only installed on square structures with code 5956 and 5965, presented on page 176

198

structure

small body - wall-mounting

5650

lamp 70W HIT (Osram)

2291 2600

3624

medium body - wall-mounting

ø 315 358

code

1145 1300

medium body - pole 9000

319

code

319

MaxyWoody small body

floodlights

1520 1752

small body - pole 7000

small piccolo medium medio

FrameWoody design Mario Cucinella

LIGHTING PROJECTOR SYSTEMS FOR URBAN AREAS WALL SYSTEMS FOR URBAN AREAS

iGuzzini Registered Design

926 1086

1580 1812

1145 1300

2291 2600

1856 2088 ø120

Elliptical light flow refractor

1085 1240

ø120

Coloured filters

ø120

9000 7000

9000

Accessory retention cable

Circular louvre

Accessories compatible with FrameWoody. The codes can be found on page 176.

ø 194

HSE

1289 0000 194

BG42 + BZG1

W-Saving: maximum nominal power of the lamp up to 250 W. The components that are necessary for the operation of the fittings must be ordered separately. They are presented on page 262.

code

0000 8000

120 00-000

7000 0000 size

1841 0000

1000

length

440

code

colour

0000 1288

colour 15

ø 420

code

colour

poles

0453 0000

1289

0000 1290 code

length

120 194

0000 10000 9000 0000 size

1843 0000

colour

code

length

colour

0000 1274

120

10000

colour 184

70/100

300 contropiastra fixing plate

base for pole

HST

code 1287 0000

122

70/150

W-Saving 220 V

base for pole

HST-DE

ø pole

ø194

200

186x45

L=500 ø 24

hole foro øø 80

contropiastra fixing plate

fixing platewith anchoring bolts

310x95

ø 100

*The poles are supplied without holes for the cable outlets.

lamp

L=500 ø 18

hole foro ø 80

1000

0246

fixing platewith anchoring bolts

310x95

310

1863

colour

ø 100

0227

1274 1287 1288 1289 1290

1000

code

1862

1000

code colour poles*

3200

door key

1000

terminal box

ø 620

code

colour

poles

1165 0000

1290 199

FrameWoody pendant design Mario Cucinella

Rotations on linear supports

Rotations on square supports (up light)

Rotations on square support (down light)

20° 50°

30°

Alx (Alicante) - Spain: El Corte Inglés Elx

Photo: José Hevia

20° 50°

200

LIGHTING PROJECTOR SYSTEMS FOR URBAN AREAS

iGuzzini

35°

• Direct lighting system, for use with metal halide, sodium discharge, and mercury discharge lamps. • Fixtures are installed as pendants. • The fixture has an optical assembly (MaxyWoody small or medium version) and structure (linear or cubical). • Optical assembly and frame in aluminium alloy EN1706AC 46100LF, with dual phosphorus-chromium plating of the base metal, followed by passivation heat treatment at 120° C, acrylic liquid paint surface finish which has a high resistance to atmospheric agents and UV sun rays, curing at 150° C; sodiumcalcium tempered sealing glass, transparent and colourless, 4 mm thick. Secured with captive screws. Stainless steel retention cable,49 wires, with a natural finish. 50-60 Shore A silicone gasket, with a post-curing (in oven) time of 4-6 hours at 200° C. 99,98 % ultrapure annealed aluminium sheet reflector, subjected to degreasing, high-bright finish, and anodic treatment of 2-4 micron with nickel-salt bath; Aluminium lamp holder support. The frame has slots for rainwater drainage. Double PG11 cable clamp in EPDM for pass-through cable. Pressure reducing valve.

• Pull-out control gear plate, made of hot galvanized steel sheet EN10142 DX 51D+Z (ZF), degreased; painted EN1706AC 46100LF aluminium alloy box and cover; spacers and captive screws; power supply with a non-explosive power factor correction capacitor, ballast, starter, and quick-connecting terminals A disconnecting switch with fuse is available upon request. • All screws are A2 stainless steel. • Steel structure made with hot 70 micron galvanized S235JR UNI 10025 steel with a texturised polyester powder-coating paint surface finish. Available in two versions: cubical for spotlights with individual supports, or linear for spotlights without individual supports. Longitudinal orientation (+50°/-20°) and transverse (+35°/30°) adjustments of the spotlights, suspended with 4 stainless steel length adjustable cables (diameter of 3 mm and length of 4 m). • The technical characteristics of the fitting comply with EN60598-1 standard. • IP67 IK08 • F seal • ENEC approval • Class of Insulation II

FrameWoody pendant design Mario Cucinella

LIGHTING PROJECTOR SYSTEMS FOR URBAN AREAS

iGuzzini Registered Design

The system has various applications. It can illuminate pedestrian areas and passageways, and highlight objects with a strong architectural value such as large internal environments, commercial and preservation spaces.

5678

70W HIE/M (Osram)

70W HST

70W HIT (CDO-TT) 70W HSE

SS F

5679

70W HIE (CDO-ET)

5614

5615

70W HIT (CDM-T)

5616

5617

60W HST (CPO-TW)

5684

5685

70W HIT-DE

70W HST-DE

5658

5680 5681

5660

5682

352

5659

5661 352

ø 380

70W HIE/C (Osram)

5654

ø 380 427

150W HIT (Osram)

150W HIT (CDM-T)

150W HIE/C (Sylvania)

150W HIE/M (Sylvania)

100W HST (SDW-T)

5662

100W HST (SDW-T)

5618

5619

150W HIT (CDM-T)

5620

5621

140W HST (CPO-TW)

150W HIT-DE

150W HST-DE

5666

926

code

Directional flap

Elliptical light flow refractor

Circular louvre

Coloured filters

B039

920

219

5653

5677

70W HIT (CDM-T)

B038

1370

219

5676

70W HIT (CDM-T)

B037

920

1086

5651

70W HIT (Osram)

Accessory retention cable

Accessory codes are shown on page 176.

B042

1080

231

5675

structure

optic

B041

1610

231

5650

lamp

small body

code

medium body

319 ø 315 358

ø 315

MaxyWoody medium body

code

5652

319

MaxyWoody small body

floodlights

B040

1080

5683

Codes with a grey background refer to floodlights without fixing brackets and are designed for linear versions. Floodlights are presented on page 176. The system is compatible with MaxiWoody LED floodlights that can be only installed on square structure with code B039, presented on page 176.

The units come with suspension cables.

201

MaxiWoody System design Mario Cucinella

Photo: Lv Hengzhong

iGuzzini

Beijing - China: The Linked Hybrid project Lighting project Lâ&#x20AC;&#x2122;Observatoire International Architectural project Steven Holl

202

MultiWoody

LIGHTING PROJECTOR SYSTEMS FOR URBAN AREAS WALL SYSTEMS FOR URBAN AREAS

iGuzzini

• The poles made of hot galvanized steel with 70 micron thickness treated with texturized powder paint are available in different heights: some versions (5, 7 and 9m off ground, diam. 120m) are complete with holes and membrane cabling sheath for power cables. • The maximum number of floodlights permitted on pole (see instructions sheet) depends on installation conditions (wind thrust, ground type, etc.). iGuzzini can provide stability calculations for all installation conditions. • Multiwoody can be installed on wall, floor and ceiling with a series of steel/aluminium multiple supports suitable for installation of two or three floodlights. • All external screws are made of A2 stainless steel. • The technical characteristics of the fitting comply with EN60598-1 standard. • IP67 IK08 • F seal • ENEC approval (except for LED versions) • Class of Insulation II

Photo: Enrique Padron

• System of flanges, horizontal arms and multiple supports used to fit Maxiwoody floodlights (Compact, Small and Medium body) on pole, wall, ceiling and ground. • Flanges for pole installation made of die-cast aluminium for single or double floodlight. The flanges can be installed on all poles with 120mm or 102 diam. without drilling holes for mechanical fixing. • Horizontal arms are made of diecast aluminium flanges and hot galvanized steel sheet sections. Available in single or double version to house one or two Maxiwoody floodlights (max. four products). Arms are suitable for installation of iPro floodlight (large size) fitted either in the upper or lower part of the arm. • The floodlight can be rotated and tilted in various configurations, also with the use of accessories (for horizontal arms). • Flanges and horizontal arms for pole installation are treated with texturized liquid paint with high resistance to weather agents and UV radiation.

The Havana - Cuba: Casa Pedroso and Parque Maceo

design Mario Cucinella

115°

60°

115°

Projector-bracket rotation

60°

Bracket rotation by 60° steps

203

MultiWoody flanges design Mario Cucinella

iGuzzini

Compact body

Small body

Medium body

The possible combination of poles, projectors and accessories ensures the high flexibility of the system.

The system is available in three different sizes for the floodlight.

Flanges for pole mounting are available for single or double composition.

The pole is available in two versions, with fixing plate or for burying.

204

MultiWoody wall-mounted design Mario Cucinella

iGuzzini

The wall application - thanks to the two different lengths of the multiple supports - is the ideal solution when no pole installation is possible.

The multiple wall supports are available for the application of two or three projectors.

For permitted rotations see the instructions sheet

sales order

The commercial order should be completed based on the elements making up the system.

Pole version palo pole

Wall-mounted version flangia flange

proiettore floodlight

supporto multiplo multiple support

proiettori floodlight

205

MultiWoody horizontal arms design Mario Cucinella

iGuzzini

MaxiWoody floodlights (medium, small, compact) can only be installed on top and therefore max. two floodlights for double arm and one floodlight for single arm can be installed. Moreover, only one MaxiWoody medium body can be installed for each arm on flange side towards the pole. For the correct installation of the luminaires, always refer to the instructions with product and columns. For different applications the maximum number of floodlights permitted on pole depends on installation conditions (wind thrust, ground type, etc.). iGuzzini can provide stability calculations for all installation conditions.

Accessory for complete rotation of floodlight on horizontal plane.

For permitted rotations see the instructions sheet

sales order

The pole is available in two versions, with fixing plate or for burying.

The commercial order should be completed based on the elements making up the system.

palo pole

braccio orizzontale horizontal arms

+ oppure or +

206

proiettore floodlight

MultiWoody

Photo: James Newton

iGuzzini

Farnborough - United Kingdom: Farnborough Business Park Lighting project: Light Bureau Architectural project: Bruce Gilbreth Architects

207

9000

7000

5000

All compositions illustrated are purely indicative; the maximum number of projectors depends on the conditions of the installation point and should be verified as the need arises. For the correct installation of the luminaires, always consult the instruction with product and poles.

scale 1:100 scala 1:100

MultiWoody System can install the optical assemblies with compact, small and medium body. Can also house iPro large body (page 240). In case of installation of iPro floodlight on horizontal arms the number of floodlights can be doubled. IThe system is compatible with MaxiWoody LED floodlights (compact and small body) presented on page 299

6117 L=785

for 2 floodlights

6115 L=178

102

6118 L=160

6119*

* Allows for complete rotation of floodlight on horizontal arm

W-Saving: maximum nominal power of the lamp up to 250 W. The components that are necessary for the operation of the fittings must be ordered separately. They are presented on page 262.

208

Accessory retention cable

lamp

HST-DE

70/150

HST

70/100

HSE

6013 156x180

102

6112 126x165

Directional flap

ø 60

counter flange adapter disk

120

ø pole

W-Saving 220 V

194

BG42 + BZG1

Elliptical light flow refractor

1560

102 L

6111 119x165

6014

6015

228

146

6114 L=795

102

code

228

Coloured filters

Visor

Circular louvre

Accessory codes are shown on page 176.

base for poles code

poles colour

size

1841 ø 420

base for poles code 1842

1292

poles colour

size 184

120

6012 149x180

Multiple support for three floodlights

960

6116 L=390

120

Multiple support for two floodlights

146

102 L

code

122

6113 L=400

ø pole

120

Flanges

code

for 1 floodlight

ø pole

for 2 floodlights

for 1 floodlight

Horizontal arm

1597 1598 1599

ø 620

1843

1547

MultiWoody design Mario Cucinella

LIGHTING PROJECTOR SYSTEMS FOR URBAN AREAS WALL SYSTEMS FOR URBAN AREAS

iGuzzini Registered Design

ø102

ø120

7000

6000

5000

310x95

length

102

5600

1291 1292

colour

5000

code

length

102

6800

1561

102 159

6800

1597

ø159

310x95

1544 102-127

9000

1565

9000

1599

102 159

350

1292

1165

1597-1598 1599-1547

440

350

2000

1000 1000 150 350

440

102 159

1598

terminal box code colour poles 1862 1865

1862 1865

1205 1542 1561 1543 1544 1597 1562 1598 1565 1599 1545 1547 1291 1292 1597 1287 1598 1599 1288 1545 1547

colour

8000 15 7000

door key code

colour

0227

0246 00

0246

300

1545 1547

colour

Branch box for multiple wiring fitted on a pole

120 194

10000

code

1880

9000

accessories for terminal block

accessories for terminal block code

colour

length 10000

1288

D - CH

1168

8000

100

150

code

colour

8000

poles

1562

length

fixing plate contropiastra

fixing plate with anchoring bolts code

120

L=500 ø 24

300

length

8000

310x95

hole foro 188 ø 188

100

440

300

code

1863

fixing plate contropiastra

code

102

1000 L=500 ø 24

hole foro ø 151 151 ø

1543

colour

ø194

310x95

1000

350

1000

150

1000 350

150

length

ø120

ø194

186x45

3000

186x45

ø194

1287

3200

ø159

code

6000

ø120

L=500 ø 24

hole foro ø 151 ø 151

ø102

8000

ø127

310x95

fixing plate contropiastra

colour

9000

ø102

300

1542

ø120

ø102

ø159

310x95

fixing plate contropiastra

5600

120

1000

2000 440 50

B943

code

poles

1542-1543-1544-1545 1547-1561-1562-1565 1597-1598-1599

code 1205

L=500 ø 24

hole foro ø ø 151 151

fixing plate contropiastra

ø159 186x45

150

350 50

200

1000 150 350

ø 100

310

1000

L=400 ø 18

hole foro ø 80

150

600

600 62 250

1000

186x45

310x95

100

ø159

310x95

1000

186x45

ø159

1000

310x95

100

310x95

1000

ø102

7000

ø120

ø102

ø120

poles

B944

1542-1543-1544-1561-1562 1565-1597-1598-1599

B972

1545-1547

The poles featured in the tables are suitable for fixing on I, F and E. For other countries, add the specific fixing systems featured in the table. * DIN guide for D and CH **Marine grade plywood support for terminal board for GB

Poles with plate are suitable for the F and E markets

209

MultiWoody - FrameWoody poles design Mario Cucinella

iGuzzini

• Made of EN10025-S235JR (codes 1542-1561-1562-1565) or EN10025-S355JR (codes 15431544), 70 micron hot galvanized steel as UNI EN ISO 1461 (EN40-5) standards. • Powder-coating paint surface finish. • The pole has a cylindrical crosssection with a ø 102 mm (1542-1543); it is either formed with two cylindrical joints with ø 127-102 mm, cross sections, welded together (1544); or it is formed with two cylindrical joints with ø159-102 mm (codes 15971598-1599- 1561-1562-1565) • The upper part of the pole is provided with six through holes and stainless steel threaded inserts for arm fixing with tie rod. • 4 mm thickness (poles 1542-15431544-1599-1565 3 mm thickness (1597-1598-1561-1562). • Cable access slot 150x50 mm. • Anchoring plate is made of 70 micron hot galvanized steel, and has 4 slots. • Anchor bolts and plate (to be ordered separately). • Raised inspection lid IP54 and 186x45 mm dimensions (1542-1543-1544), flush lid with IP44 310x95 mm (1597-1598-15991561-1562-1565). • 4-pole terminal block with three connections for each pole and single or double integrated fuse; designed for 16 mm2 feed cables and 2,5mm2 exit cables. • Poles (1597-1598-1599) suitable for Italian, French and Spanish terminal blocks, poles (1561-1562-1565) suitable for German/Swiss and English terminal blocks (with wooden adapter and DIN bar to be ordered separately); poles (1542-1543-1544) suitable for Italian terminal blocks. • Internal grounding system (1597-1598-1599-1561-1562-1565) or external grounding system (1542-1543-1544) with grounding lug, steel insert, and stainless steel screw. • Terminal block: IP43 IK0 (1862/1865).

Flush inspection lid IP44

210

Protruding inspection lid IP54

Available in buried versions or with plate with following heights: 9 m, 10 m and 12m. • Made of EN10025-S355JR (codes 1545-1546-15471548-1552-1554),70 micron hot galvanized steel as UNI EN ISO 1461(EN 40-5). • Powder-coating paint surface finish. • Composed of two cylindrical sections with ø 194-120 mm (code 1545-1547) welded together. • The upper part of the pole is provided with six through holes and stainless steel threaded inserts for arm fixing with tie rod. • 3-4 mm thickness. • Cable access slot 150x50 mm. • Anchoring plate made of 70 micron hot galvanized steel, with 4 slots. • Anchor bolts and plate (to be ordered separately). • Flush inspection lid 310x95 mm (for poles with codes 1545-15471597-1598-1599-1287-1291). • 4-pole terminal block with three connections for each pole and single or double integrated fuse; designed for 16mm2 feed cables and 2,5mm2 exit cables. • Versions with h=9/10/12 m and 6/7/8 with plate are suitable for Italian, French, Spanish and English terminal blocks (with wooden adapter to be ordered separately) and German/Swiss (with DIN bar to be ordered separately). • Internal earthing system (for poles with h=9/10/12 m) with grounding lug, steel insert, and stainless steel screw. • Inspection lid: IP44 (for poles with h=9/10/12 m) • Terminal block: IP44 IK08 for poles with h=9/10/12 m.

CityWoody poles iGuzzini

• CityWoody has 400x18 mm anchor bolts (for poles that are h=4 m) or 500x18 mm anchor bolts (for poles that are h=7 m). • External 186x45 mm access cover made of cast aluminium and equipped with watertight gasket. • 4-pole terminal block with three connections for each pole and single or double integrated fuse; designed for 16mm2 feed cables and 2,5mm2 exit cables. • Grounding system with grounding lug, weather protected steel cable, and A2 M8x16 stainless steel screw. • Access cover: IP54 IK10 • Terminal block: IP43 IK08

Photo: Giuseppe Saluzzi

• Supplied in flange or root mounted versions: H=4 m and 7 m models available. • Made of EN10025-S235JR 70 micron hot galvanized steel as UNI EN ISO 1461 (EN 40-5) standards. • Acrylic powder-coating paint surface finish. • The pole has a conical cross section with an upper diameter of 60 mm. • 3 mm thick. • The pole that is cemented into the ground has a slot for feed cables that is 150x50 mm. • The 260x260x15 mm anchoring plate is made of EN 10025-S235JR 70 micron hot galvanized steel

Cagliari - Italy: Elmas airport

design Mario Cucinella

Protruding inspection lid IP54

211

Floodlight page 218

Single version with arm on poles ø 102 design Rafael de Cáceres and Antoni Rosellò

page 236

LED version

212

RGB version

Light management systems

W-Saving: automatic flow regulator

Wide range of accessories

Platea System design P. Castiglioni - M. Cucinella

iGuzzini

Double version with long arm on conical poles page 227

Through an articulated range of steel posts and arms, the Platea floodlights become a true lighting system for urban and residential areas. The large variety of solutions provide multiple scenographic applications: from individual or double arms, in two

shapes, to models with flange for application of one floodlight along the post, including wall-mounted versions. The use of LED's guarantees high luminous efficiency, total energy saving and suggestive light and colour scenes.

Height: 8000 mm Height: 7000 mm Height: 6000 mm Height: 5000 mm

Height: 3500 mm

scale 1:200

213

Platea System LED design P. Castiglioni - M. Cucinella

ALo Optic The innovative ALo optic, especially studied for the Platea system, is the ideal lighting solution for cycle lanes and pathways. It ensures high average illuminance values increasing safety of cycle and pedestrian traffic. The special reflector allows for large spacing between poles to guarantee high energy saving.

iGuzzini

LED 36x1W (BC45) a

Emax Emin

4 m 2,5 m 18,5 m 7,6 lux 1,5 lux

0,2

Cycle lane S3, EN 13201 Standard

Flood Optic (F) Wide uniform luminous flow used to illuminate green areas, squares, transit spaces and common areas, with a strong focus on energy saving and easy maintenance.

LED 36x1W (BC46)

ill.ab. h Emax Emed L1xL2

7 m 6x14m 84 lux 27 lux

20°

9 m 10x18m 50 lux 12 lux 10 m

20°

L1 L2

Spot Optic (S) Wall-mounted application on building façades for exact clear valorisation of objects, statues and architectural details. It gives excellent results to light sculptures at very large distances.

LED 36x1W (BC44) ill.ab. L1xL2

Emax

Emed

12 m 3x3 m

24 lux

16 lux

24 m

3x3 m

90 lux

50 lux

15 m

ill.ab. L1xL2

h d

Transversal Light Sliver Optic (LT) Elliptical flow especially suitable to illuminate horizontal surfaces. It concentrates the light on the object to illuminate with high energy saving.

LED 36x1W (BC48) Emax

Emed

4x2 m 380 lux 110 lux

15°

8x2 m 110 lux

5°

50 lux

Uo= Average uniformity of examined area h= Installation height a= Spacing between poles α= Inclination with respect to horizontal plane Emed = Average illuminance in the area Emin = Minimum illuminance

214

Platea System design P. Castiglioni - M. Cucinella

iGuzzini

Flood Optic (F) Enables large spaces to be illuminated. The Platea floodlight is equipped with accessories such as a baffle and screen to prevent such possible phenomena as glare and dispersal of light in unwanted directions.

HIT-DE 150 W Rx7s L2

ill.ab. L1xL2

Emax

Emed

4x5m 630 lux 177 lux

7x8m 227 lux 62 lux

a 5m 8m

10 m 13x17m 57 lux

22 lux

17 m

15 m 20x25m 25 lux

11 lux

25 m

Asymmetric Optic (A) The Asymmetric optic has its greatest luminosity at 45째. It projects the light flow forwards without any need for the unit to be angled: glare and light pollution are therefore reduced to a minimum.

HIT-DE 150 W Rx7s a

h 3m h

ill.ab. L1xL2

Emax

Emed

10x6m 285 lux 63 lux

a 6m

5 m 10x10m 105 lux 37 lux

10 m

10 m 15x20m 26 lux

11 lux

20 m

15 m 20x30m 12 lux

5 lux

30 m

L1 L2

Transversal Light Sliver Optic (LT) Thanks to the high level of control of the light flow, the Light Sliver Optic can be effectively used in historic centres to light up narrow streets and passages, avoiding stray light and effects of glare on the facades abutting the road.

HIT 150 W G12 a

ill.ab. L1xL2

Emax

Emed

2x5m 640 lux 244 lux 5,5 m

3x9m 250 lux 121 lux

10 m 7x18m 64 lux

25 lux

18 m

15 m 10x26m 29 lux

12 lux

26 m

L1 L2

Asymmetric Light Sliver Optic (LA) Combines the features of Light Sliver and Asymmetric optics, permitting good vertical lighting on the facades of buildings (Light Sliver) besides correct horizontal lighting (Asymmetric optic).

HIT-DE 150 W Rx7s a

h 3m

ill.ab. L1xL2

Emax

Emed

10x6m 286 lux 63 lux

a 6m

5 m 10x10m 86 lux

29 lux

10 m

10 m 15x20m 21 lux

9 lux

20 m

15 m 20x30m 10 lux

4 lux

30 m

L1 L2

Emed = average lighting in the area Emax = imax lighting in the area h= Installation height a= Distance between poles

215

Platea System design P. Castiglioni - M. Cucinella

iGuzzini

Longitudinal Light Sliver Optic (LL) Can be used to illuminate features such as vertical architecture.

HIT 150 W G12

Emed

2x5m 640 lux 244 lux

3x9m 250 lux 121 lux

d L1

ill.ab. L1xL2

Emax

10 m 7x18m 64 lux

25 lux

15 m 10x26m 29 lux

12 lux

Spot Optic (S) Enables the light flow to be concentrated to highlight architectural details, avoiding the dispersal of light into the environment and minimising light pollution.

HIT 150 W G12

ill.ab. ø

Emax

Emed

1519 lux 893 lux

619 lux 136 lux

10 m

155 lux 98 lux

15 m

69 lux

41 lux

Superspot (SS) Platea Superspot provides de signers with new possibilities in terms of urban lighting. In effect, the new optic maximises concentration of the luminous flux, enabling the beam to highlight features and details or architectural interest while minimising light pollution caused by the uncontrolled dispersal of light into the environment. The table illustrates the lighting specifications of the two optics used with this system: 10° and 5°.

HIT 150 W G12 ø

ill.ab. ø

Emax

Emed

0,5 m

15750 lux

9300 lux

10 m

0,9 m

3950 lux

2580 lux

15 m

1,35 m

1750 lux

1150 lux

20 m

1,8 m

980 lux

650 lux

ill.ab. ø

Emax

Emed

0,9m

2140 lux

1600 lux

HST 150 W E40 ø

10 m

1,8m

540 lux

400 lux

15 m

2,7m

240 lux

180 lux

20 m

3,6m

135 lux

100 lux

Emed = average lighting in the area Emax = imax lighting in the area h= Installation height

216

Platea System design P. Castiglioni - M. Cucinella

iGuzzini

Road Optic (ST) Makes it possible to obtain a greater distance between the posts, consequently with fewer fixtures, less visual impact, lower purchase, maintenance and power costs.

HIT-DE 150 W Rx7s a

Lmed TI%

26 m

0,45

0,50

1,55

2,00

10 m 40 m

0,47

0,45

1,00

h Uo UL 8m

Flood Optic (F) The Flood Optic (F) is the ideal choice for lighting large outdoor areas.

Uo= Average uniformity of zone examined UL= Longitudinal uniformity Lmed= Average luminance in cd/m2 h= Installation height a= Distance between poles TI= Physiological glare G= Psychological glare

HIT-DE 150 W Rx7s

Emax

Emed

7x8m 227 lux 62 lux

8 m 10x13m 89 lux

25 lux

13 m

10 m 13x17m 57 lux

20 lux

17 m

5m h

ill.ab. L1xL2

L1 L2

Asymmetric Optic (A) The Asymmetric optic allows glare and light pollution to be drastically reduced and and also curbs stray light falling onto facades of buildings.

HIT-DE 150 W Rx7s

ill.ab. L1xL2

Emax

Emed

8x10m

78 lux

40 lux

10 m

8 m 10x16m 31 lux

16 lux

16 m

10 m 12x20m 20 lux

10 lux

20 m

L1 L2

Transversal Light Sliver Optic (LT) Thanks to the high level of control of luminous flux, the Light Sliver Optic can be effectively used in historic centres to light up narrow streets and passages, avoiding stray light and effects of glare. Furthermore, when correctly angled, this optic can be used to highlight architectural details.

HIT 150 W G12

ill.ab. L1xL2

Emax

Emed

3x9m 250 lux 121 lux

5x14m 98 lux

40 lux

14 m

10 m 7x18m 64 lux

25 lux

18 m

L1 L2

217

Platea design P. Castiglioni - M. Cucinella

FLOODLIGHTS iGuzzini

Alx (Alicante) - Spain: El Corte Inglés Elx

Photo: José Hevia

• Direct lighting fixture for LED’s, metal halide, sodium vapour, halogen and fluorescent lamps. • The fixture is installed into the ground, wall-mounted and on pole. • The fixture has an optical assembly and a mounting pole. • Optical assembly and frame in aluminium alloy, acrylic painting, sodium-calcium tempered sealing glass, transparent, secured with screws and pregalvanized steel and degreased shims. 40±5/50±5 Shore A silicone gasket. • Superpure aluminium reflector. • Control gear plate made of pregalvanized and degreased steel; power supply with a non-explosive power factor correction capacitor, switch, reactor, and quickconnecting terminals. • There is no light dispersion into the upper hemisphere above this luminaire. • Monochromatic LED version with 36-LED circuit, optics with plastic lenses, glass with customised serigraphy or striped glass, and 100-265Vac 50/60Hz built-in electronic control gear. • RGB LED version with 36 multicolour LED circuit, DALI Direct dim (for RGB versions)

218

Adjustable product

Easy installation and maintenance

Double cable clamp

electronic control board, optics with plastic lenses, glass with customised serigraphy or striped glass and 100-120/220-240Vac 50/60Hz built-in control gear. • DALI RGB LED versions are provided with RGB DIRECT DIM for dimming with standard button with the following functions: Soft ON/OFF, colour change, last colour memory, default dynamic sequence. • Optics: Superspot (SS), Spot (S), Flood (F), Asymmetric (A), Asymmetric Light Sliver (LA), Longitudinal asymmetric to LED (ALo), Transversal Light Sliver (LT) Longitudinal Light Sliver (LL), Longitudinal Elliptical (EL), Transversal Elliptical (ET), Road Optic (ST). • Ready for pass-through cables with M24x1.5 double cable clamp made of nickel-plated brass (for cables with 7÷16mm diameter). • Stainless-steel external screws. • The technical characteristics of the fitting comply with EN60598-1 standard. • IP66 IK04/08 • F seal • ENEC approval • Class of Insulation II

Platea

FLOODLIGHTS

design P. Castiglioni - M. Cucinella

iGuzzini

lamp

optic ,PD[ FG

Floodlight with monochromatic LED BA44 36x1 W neutral white S BA45 36x1 W warm white S IP66 IK08

& /X[ Â&#x192;

Â&#x192;

Neutral white = 4200K Warm white = 3100K

Â&#x192;

,PD[ FG

Floodlight with monochromatic LED BA46 36x1 W neutral white F BA47 36x1 W warm white F IP66 IK08

Â&#x192;

[ : 1HXWUDO

Complete with electronic power supply Floodlight with monochromatic LED BA48 36x1 W neutral white LT BA49 36x1 W warm white LT IP66 IK04

Â&#x192; /('

Â&#x192;

,PD[ FG

370 431

(PD[

& J Â&#x192; Â&#x192;

Â&#x192;

Neutral white = 4200K Warm white = 3100K

/X[ Â&#x192;

Â&#x192;

Neutral white = 4200K Warm white = 3100K

G (P (PD[

250

/('

[ : 1HXWUDO

Complete with electronic power supply

146

code

Â&#x192;

[ : 1HXWUDO

Complete with electronic power supply Floodlight with monochromatic LED BA50 36x1 W neutral white LL BA51 36x1 W warm white LL IP66 IK04

Â&#x192; /('

Â&#x192; Â&#x192;

,PD[ FG

& Â&#x192;

Â&#x192;

Neutral white = 4200K Warm white = 3100K

Â&#x192;

[ : 1HXWUDO

Complete with electronic power supply

Â&#x192; /('

,PD[ FG

Floodlight with monochromatic LED BC45 36x1 W cool white ALo BC46* 36x1 W warm white ALo IP66 IK08

Â&#x192; Â&#x192;

& J Â&#x192; Â&#x192;

Â&#x192;

Cool white = 6700K Warm white = 3100K

Â&#x192;

[ : &RRO

* On request available version

Â&#x192; /('

Â&#x192; Â&#x192;

BA48

BA50

/X[ K P D Â&#x192;

/(' :

/('

BC45 /X[ K P D Â&#x192;

/(' :

219

Platea

FLOODLIGHTS

design P. Castiglioni - M. Cucinella

iGuzzini

lamp

optic ,PD[ FG

/X[ Â&#x192;

Â&#x192;

IP66 IK08 : /(' 5*%

Â&#x192; /('

Â&#x192;

,PD[ FG .OP

(PD[

370 431

Â&#x192;

Â&#x192; /('

Transmission coefficient (K)

& /X[ .OP Â&#x192;

Â&#x192;

Complete with electronic power supply, and electronic DALI control card. Occupies 3 DALI addresses

Data refers to 6000K white light

Floodlight with LED with dynamic colour changes RGB DALI BB26 72 W max 36 LED ET BB27 72 W max 36 LED EL IP66 IK04

250

Complete with electronic power supply, and electronic DALI control card. Occupies 3 DALI addresses

146

code

Floodlight with LED with dynamic colour changes RGB DALI BB25 72 W max 36 LED

Â&#x192; Â&#x192;

G (P (PD[

Colour

White 6000K Cyan Orange Magenta Yellow Green Red Blue

1 0,41 1,09 0,78 1,03 0,88 1,26 0,15

Data refers to 6000K white light ,PD[ FG

& /X[ Â&#x192;

Â&#x192;

: /(' 5*%

Â&#x192; /('

Â&#x192; Â&#x192;

Â&#x192;

G (P (PD[

Data refers to 6000K white light

Block diagram of Colour Quick system

Remote units

Main unit

Components

Luminaires

Colour Quick

Electronic power supply designed to mount on a DIN standard profile 220Ăˇ240V 24Vdc

Platea LED RGB is also compatible with other light control systems of the iGuzzini range illustrated in this catalogue.

code 9730 available in colours 01 and 15

code 9908

max 64 (DALI loads) For the system definition, efer to the instructions.

Remote control

Platea LED RGB (1 load/3 addresses DALI)

code 9731 available in colour 01

max 64

accessories

220

code

Wall washer screen 1176 for BA44-BA45-BA46-BA47-BA48 BA49-BB25-BB26-BC45

Baffle 1177 for BA44-BA45-BA46-BA47-BA50 BA51-BB25-BB27-BC45

Available in colour 04

Platea

FLOODLIGHTS

design P. Castiglioni - M. Cucinella

iGuzzini 03

optic

Data refer to Philips CDM-T lamps.

7+52: VKRUW 6/, ',1 .% &(1 * '

+,7 *

& J Â&#x192; &,( Â&#x192;

Â&#x192;

Â&#x192; ,PD[ FG .OP

HIT-DE HST-DE HIT-DE HST-DE

ST ST ST ST

IP66 IK08

& J Â&#x192; &,( Â&#x192;

Â&#x192;

Â&#x192; ,PD[ FG .OP

& J Â&#x192; &,( Â&#x192;

Â&#x192;

Â&#x192; ,PD[ FG .OP

HIT (CDM-T)

& J Â&#x192; &,( Â&#x192;

Â&#x192;

/$ 635($' QDUURZ

Â&#x192; 7+52: VKRUW 6/, ',1 .% &(1 * '

+,7 &'0 7 *

Superspot floodlight 7475 70 W

Q/ /$

Â&#x192; 635($' QDUURZ 7+52: VKRUW 6/, &(1 * '

+67 '( 5[ V

Road Optic 7499 250 W

Q/ /$

Â&#x192; 635($' QDUURZ 7+52: VKRUW 6/, ',1 .% &(1 * '

+,7 '( 5[ V

Q/ /$

Â&#x192; 635($' QDUURZ 7+52: VKRUW 6/, ',1 .% &(1 * '

+,7 &'0 7 *

Road Optic 7698 70 W 70 W 7699 150 W 150 W

Â&#x192; ,PD[ FG .OP

HIT

Â&#x192;

/X[ .OP Â&#x192;

IP66 IK08 :

Data refer to Philips CDM-T lamps.

370 431

Â&#x192; ,PD[ FG .OP

Q/ /$

Â&#x192; 635($' QDUURZ

250

IP66 IK08

& J Â&#x192; &,( Â&#x192;

Â&#x192;

Â&#x192; +,7 &'0 7 * D Â&#x192;

(PD[

370

431

ST ST

146

,PD[ FG .OP

HIT HIT

370

lamp

Road Optic 7444 70 W 7445 150 W

431

code

147

Superspot floodlight 7476 150 W

,PD[ FG .OP

HIT

Â&#x192;

/X[ .OP Â&#x192;

IP66 IK08 :

Data refer to Philips HQI-T Osram lamps. Spot floodlight 7473 150 W HST 150 W HIT (CDO-TT)

Â&#x192; +,7 *

Â&#x192;

,PD[ FG .OP Â&#x192;

Â&#x192;

S S :

Â&#x192; +67 (

(PD[

/X[ .OP Â&#x192;

IP66 IK08

Â&#x192;

(PD[

280

Spot floodlight 7477 250 W

,PD[ FG .OP

HIT

Â&#x192;

IP66 IK08

Only for Osram lamps.

Â&#x192; +,7 (

Â&#x192;

/X[ .OP Â&#x192;

(PD[

221

Platea

FLOODLIGHTS

design P. Castiglioni - M. Cucinella

iGuzzini 03

lamp

optic ,PD[ FG .OP & J Â&#x192; /X[ .OP

HIT HIT

Â&#x192;

S S

Â&#x192;

IP66 IK08 :

Â&#x192; Â&#x192; Â&#x192;

G (P (PD[

370 431

250

+,7 *

146

code

Spot floodlight 7385 70 W 7386 150 W

,PD[ FG .OP & J Â&#x192; /X[ .OP Â&#x192;

Â&#x192;

Â&#x192; +,7 *

Asymmetrical floodlight 7377 70 W HIT-DE 70 W HST-DE 7378 150 W HIT-DE 150 W HST-DE 7395 250 W HIT-DE 7393 300 W QT-DE 12

,PD[ FG .OP

A A A A A A

G (P (PD[

& J Â&#x192; Â&#x192;

Â&#x192;

Â&#x192; Â&#x192;

,PD[ FG .OP

Â&#x192;

Â&#x192; D

Â&#x192;

Â&#x192; Â&#x192;

+67 '( 5[ V

,PD[ FG .OP

IP66 IK08

& J Â&#x192; Â&#x192;

Â&#x192;

Â&#x192; Â&#x192;

,PD[ FG .OP

Â&#x192;

Flood floodlight 7376 2x26 W

47 '( 5[ V

Â&#x192;

IP66 IK08 [ :

Â&#x192; 7& 7 *; G

Flood floodlight 7379 70 W HIT-DE 70 W HST-DE 7380 150 W HIT-DE 150 W HST-DE 7394 250 W HIT-DE 7392 300 W QT-DE 12

Â&#x192; Â&#x192;

,PD[ FG .OP

F F F F F F

Â&#x192;

Â&#x192; +,7 '( 5[ V

Â&#x192; Â&#x192;

,PD[ FG .OP

IP66 IK08

Â&#x192;

Â&#x192; +67 '( 5[ V

Â&#x192; Â&#x192;

Imax=696 cd/Klm

90Â°

750 250 W

0Â° HIT-DE - Fc2

Îą= 72Â°

/ 41Â°

,PD[ FG .OP

Â&#x192; 47 '( 5[ V

222

Â&#x192; Â&#x192;

G (P (PD[

8 11.6

Em Emax 8

16 23.2

24 34.9 17.9

0.9

32 46.5 23.9

0.5

0.7

& /X[ .OP Â&#x192;

Â&#x192;

C0-180 Lux/Klm 180Â°

90Â°

& /X[ .OP Â&#x192;

Â&#x192;

Â&#x192; Â&#x192;

& /X[ .OP Â&#x192;

Â&#x192;

& /X[ .OP Â&#x192;

Â&#x192;

Â&#x192; Â&#x192;

,PD[ FG .OP

TC-T

& J Â&#x192; Â&#x192;

Â&#x192;

: +,7 '( )F

Â&#x192;

: +,7 '( 5[ V

& J Â&#x192; Â&#x192;

Â&#x192;

G (P (PD[

Â&#x192;

Platea

FLOODLIGHTS

design P. Castiglioni - M. Cucinella

iGuzzini 03

lamp

optic ,PD[ FG .OP

& Â&#x192;

Â&#x192;

LT LT

146

code

Transversal light sliver floodlight 7387 70 W HIT 7388 150 W HIT

Â&#x192;

370 431

IP66 IK04 :

Â&#x192; D

Â&#x192; Â&#x192;

250

+,7 *

,PD[ FG .OP

& Â&#x192;

Â&#x192;

Â&#x192; +,7 *

Longitudinal light sliver floodlight 7399 150 W HIT

Â&#x192; Â&#x192;

,PD[ FG .OP

& J Â&#x192; Â&#x192;

Â&#x192;

IP66 IK04 :

Â&#x192; +,7 *

Transversal light sliver asymmetrical floodlight 7396 70 W HIT-DE 7397 150 W HIT-DE 7369 250 W HIT-DE

Â&#x192; Â&#x192;

,PD[ FG .OP

LA LA LA

& J Â&#x192; Â&#x192;

Â&#x192;

IP66 IK04

+,7 '( 5[ V

Â&#x192; Â&#x192;

,PD[ FG .OP

& J Â&#x192; Â&#x192;

Â&#x192;

Â&#x192; +,7 '( 5[ V

Â&#x192; Â&#x192;

,PD[ FG .OP

& J Â&#x192; Â&#x192;

Â&#x192;

Â&#x192; +,7 '( )F

Â&#x192; Â&#x192;

accessories code

code

Spill ring 4452 for 7473-7477 4453 for 7475-7476

Baffle 1177 for 7376-7379-7380-7385-7386-7391 7392-7394

Available in colour 04

Wall washer screen 1176 for 7376-7379-7380-7385-7386-7387 7388-7392-7394 Available in colour 04 223

Platea design P. Castiglioni - M. Cucinella

FLOODLIGHTS iGuzzini

7444

7445

/X[ K P D Â&#x192;

+,7 &'0 7 * :

7698

7699

/X[ K P D Â&#x192;

+,7 '( 5[ V :

+67 '( 5[ V :

7499

7377 Lux h=5 m. Îą =0Â°

/X[ K P D Â&#x192;

+,7 &'0 7 * :

31 21

HIT-DE Rx7s 70W

-1

7378

7395

Lux h=5 m. Îą =0Â°

Lux h=5 m. Îą =0Â° 127

92 64

170

HST-DE Rx7s 150W

123 85

HIT-DE Fc2 250W

-1

7393

7376

Lux h=5 m. Îą =0Â°

/X[ K P D Â&#x192; 42 36

26 17

10 7

7& 7 *; G :

QT-DE 12 Rx7s 300W

-1

224

Platea design P. Castiglioni - M. Cucinella

FLOODLIGHTS iGuzzini

7379

7380

Lux h=5 m. Îą =0Â°

Lux h=7 m. Îą =0Â°

HIT-DE Rx7s 70W

-5

-4

-3

-2

-1

125

39 27 16

HST-DE Rx7s 150W

-5

-4

-3

-2

-1

7394

182 130

44 32

7392 Lux h=5 m. Îą =0Â°

Lux h=9 m. Îą =0Â°

125 154 100 48 33 20

HIT-DE Fc2 250W

-10

-8

-6

-4

-2

66 39 27

QT-DE 12 Rx7s 300W

-5

10 m

-4

-3

-2

-1

7387

7388

/X[ K P D Â&#x192;

+,7 * :

7399

/X[ K P D Â&#x192;

7396

/X[ K P D Â&#x192;

+,7 * :

+,7 '( 5[ V :

7397

7369

Lux h=7 m. Îą =0Â°

/X[ K P D Â&#x192;

10 7

HIT-DE Rx7s 150W

+,7 '( )F :

-10

-8

-6

-4

-2

10 m

225

Platea design P. Castiglioni - M. Cucinella

Photo: Lv Hengzhong

Shanghai - China: Expo Shanghai 2010 “Better City, Better Life” UBPA - Pavilion B3-2 Lighting project: Favero & Milan ingegneria Architectural project: Archea Associati

226

FLOODLIGHTS iGuzzini

Platea System design Mario Cucinella

iGuzzini

LIGHTING PROJECTOR SYSTEMS FOR URBAN AREAS WALL SYSTEMS FOR URBAN AREAS

Cupramarittima - Italy: Promenade Cupramarittima

Photo: Giuseppe Saluzzi

• Direct lighting system, for use with metal halide, sodium discharge, halogen and fluorescent lamps. • Fixture can be installed on a pole or wall-mounted. • Fitting has an optical assembly, arm (single or double) and pole. • Optical assembly and frame in aluminium alloy 1706AC 46100LF, with dual phosphorus-chromium plating of the base metal, followed by passivation heat treatment at 120° C, acrylic paint finish, curing at 150° C; sodium-calcium tempered sealing glass, transparent, secured with screws and pregalvanized steel and degreased shims; 40±5/50±5 Shore A silicone gasket, subjected to a post-curing (in oven) time. Ultrapure aluminium reflector with a high-bright finish. Ready for a double PG11 cable clamp for pass-through cable. • Pre-galvanized steel degreased control gear plate. Power supply with non-explosive power factor correction capacitor, ballast, starter, and quick-connecting terminals. • There is no light dispersed into the upper hemisphere above the system. • All screws are A2 stainless steel. • The arm is made of steel (for the long arm) or 99,5 % UNI 9001/2 H24 1/2 raw pure painted aluminium (short arm). It is secured to the pole with an attachment in die-cast grey-painted aluminium. • The technical characteristics of the fitting comply with EN60598-1 standard. • IP66 IK04/08 • F seal • ENEC approval • IMQ Performance • Class of Insulation II

No upward emission of light flow

Installation of the arms with no holes

227

The facilty of installing arms, poles, flanges, floodlights and accessories in a variety of combinations is the key to the flexibility and adaptability of the system.

The applications with various types of arms, in single and double arm versions and with the use of a flange.

The mechanical resistence of the entire system is guaranteed thanks to the use of original iGuzzini components.

Intermediate arm may be fixed to a pole (h=7 m) at a height of 4 m from the ground

The steel poles are made in versions to be buried or with fixing plates.

228

Platea System design Mario Cucinella

iGuzzini

Thanks to its distance from the wall, the wall-mounted version is the ideal choice for lighting even small areas, as it eliminates the problem of stray light falling onto building facades.

sales order

The commercial order should be completed based on the elements making up the system.

pole

arm

floodlights

229

iGuzzini

9000

7000

4000

All compositions illustrated can be obtained by combining the single elements presented in the tables.

scale 1:100

820

single arms

305

230

980

intermediate arms

270

538

682

1680

820

colour

code

colour

code

colour

1145

1144

1262

HST-DE

337

632

code

colour

code

colour

1148*

1264*

* For installation on columns with code 1281-1283 (at a height of 4 m off the ground)

arms wall luminaire

HST

W-Saving Ă¸ pole 230 V 220 V BG43 + 138 BZC1 70/150 BG42 BG43 + + 158 BZG0 BZG0 BG43 + 138 BZC1 100 BG42 BG43 + + 158 BZG0 BZG0 W

W-Saving: maximum nominal power of the lamp up to 250 W. The components that are necessary for the operation of the fittings must be ordered separately. They are presented on page 262.

230 239

538

460

1057

1285

305

230

980

double arms

1680

lamp

230

880

code

colour

code

colour

code

colour

code

colour

code

colour

1147

1146

1263

1149

1265

The terminal blocks have four polarities with three ways for pole and are fitted for bridge wiring. They are made with class II insulation. Code 1862 is equipped with a fuse holder for dim. 8,5 x 31,5 - 380 V - max 20 A. Suitable for power cables with cross-section 16 mm2 on input and 2.5 mm2 on output to hook up with the light source. Code 1865 is equipped with two fuse holders for dim. 8,5 x 31,5 - 380 V - max 20 A. Suitable for power cables with cross-section 16 mm2 on input and 2.5 mm2 on output to hook up with the light source. Code 1864 is equipped with two fuse holders for dim. 5x20- 450 V - max 10 A. Suitable for power cables with cross-section 6 mm2 on input and 2.5 mm2 on output to hook up with the light source.

230

terminal box code colour poles

1862* 00 1864

1281 1282 1283 1284

door key code

colour

0227

1275 1278

* Terminal block code 1865 can be supplied upon request.

Platea System design Mario Cucinella

LIGHTING PROJECTOR SYSTEMS FOR URBAN AREAS WALL SYSTEMS FOR URBAN AREAS

iGuzzini

994

1085

1874

1910

994

ø60

4000

7000

ø60

9000

ø60

431

L=500 ø 24

100

ø158

440

hole foro ø 80 80

200

300

contropiastra fixing plate

4600

60-100

4000

code

length

1281

60-138

7800

1283

60-130

7000

ø 420

Fixing plate with anchoring bolts code 1168 for pole code 1278.

code

size

colour 122

1870

code

length

1282

60-158

9800

1284

60-150

9000

colour

base for pole

colour 122

size

colour

1871 ø 420

Fixing plate with anchoring bolts code 0453 for pole code 1283.

code

size

colour 184

60-106

1278

colour

base for pole

length

base for pole

1000

1000 100

310

ø138

800

L=500 ø 18

hole foro øø 80

200

1275

code

186x45

1000

1000 100

310

800

L=400 ø 18

hole foro øø 80

ø106

code

186x45

800

600

800

186x45

1872

ø 620

Fixing plate with anchoring bolts code 1165 for pole code 1284.

231

Platea System poles design Mario Cucinella

iGuzzini

• Anchor bolts and plate available in different sizes to fit the different poles. • Protruding lid 186x45 mm The access covers are made with cast aluminium and equipped with watertight gasket. • 4-pole terminal block with three connections for each pole and single or double integrated fuse; designed for 16 mm2 feed cables and 2,5 mm2 exit cables. • Grounding system with grounding lug, weather-protected steel cable, and A2 M8x16 stainless steel screw. • Access cover: IP54 • Terminal block: IP43 IK08

Delft - Holland: Road and street lighting

Photo: iGuzzini Illuminazione Benelux

• Supplied in flange or root mounted versions. H= 4 m, 7 m and 9 m models available • Made of EN10025-S235JR 70 micron hot galvanized steel as UNI EN ISO 1461 (EN 40-5) standards. • Acrylic powder-coating paint surface finish. • The pole has a conical cross-section with upper diameter of 60 mm. • 3 mm thick. • The pole that is cemented into the ground has a slot for feed cables that is 150x50 mm. • Anchoring plate is made of EN 10025-S235JR 70 micron hot galvanized steel.

Protruding inspection lid IP54

232

Platea System design Mario Cucinella

Photo: Lv Hengzhong

iGuzzini

Changzhou - China Changzhou Olympic Sports Centre Lighting project: Changzhou Tianyu Intelligent System Integration, Ltd. Architectural project: Jiangsu Century Architecture Design Co., Ltd

233

Platea System 102 iGuzzini

design P. Castiglioni - M. Cucinella

The arms can be installed in pair or invidually with flange.

The arms are available in three lengths and in wall-mounted version

sales order

The pole is available in two versions, with fixing plate or for burying.

The commercial order should be completed based on the elements making up the system. pole palo

234

flange flangia

arm braccio

Two arms without flange must be ordered for double compositions.

optical vanoassembly ottico

Installation with flange without drilling the pole

LIGHTING PROJECTOR SYSTEMS FOR URBAN AREAS WALL SYSTEMS FOR URBAN AREAS

• Direct lighting system, for use with metal halide, sodium discharge, halogen and fluorescent lamps. • Installation on pole with ø 102mm or wall-mounted with possible adjustment of floodlight. • Arm installation with flange (design Rafael de Cáceres e Antoni Rosellò) without drilling the pole. • Fitting has an optical assembly, arm (single or double) and pole. • Optical assembly and frame in aluminium alloy 1706AC 46100LF, with dual phosphorus-chromium plating of the base metal, followed by passivation heat treatment at 120° C, acrylic paint finish, curing at 150° C; sodium-calcium tempered sealing glass, transparent, secured with screws and pregalvanized steel and degreased shims; 40±5/50±5 Shore A silicone gasket, subjected to a post-curing (in oven) time. Ultrapure aluminium reflector with a high-bright finish. Ready for a double PG11 cable clamp for pass-through cable.

• Pre-galvanized steel degreased control gear plate. Power supply with non-explosive power factor correction capacitor, ballast, starter, and quick-connecting terminals. Arm and wall-luminaire made of S235JR UNI 10025 hot galvanized 70 micron painted steel. • There is no light dispersed into the upper hemisphere above the system. • All screws are A2 stainless steel. • The technical characteristics of the fitting comply with EN60598-1 standard. • IP66 IK08 • F seal • ENEC approval • Class of Insulation II

Photo: Josè Hevia

Adjustability

iGuzzini

Barcelona - Spain: Tram station

Platea System 102 design P. Castiglioni - M. Cucinella

235

8000

7000

6000

5000

3500

All compositions illustrated can be obtained by combining the single elements presented in the tables.

scale 1:100 scala 1:100

1540

3740

L=1500mm

single arm*

L=700mm

code

colour

code

colour

code

colour

BZ92

BZ93

BZ94

arm wall luminaire*

L=900mm

L=400mm

2040

code

colour

BZ96

flange for single arm*

1070

code

colour

BZ95

* design De Cáceres and Antoni Rosellò

236

code colour poles

1862 1865

1863

1203 1205 1344 1542 1543 1544 1597 1598 1599

door key code

lamp

HST-DE

70/150

colour

0227 00 HST

100

0246

W-Saving ø pole 230 V 220 V BG43 + 127 BZC1 BG42 BG43 + + 158 BZG0 BZG0 BG43 + 138 BZC1 BG42 BG43 + + 158 BZG0 BZG0

Only for 8000 mm pole W-Saving: maximum nominal power of the lamp up to 250 W. The components that are necessary for the operation of the fittings must be ordered separately. They are presented on page 262.

accessories for European poles code h pole D - CH

terminal box

6000 B943* 7000 8000

6000 B972** 7000 8000

The poles featured in the tables are suitable for fixing on I, F and E. For other countries, add the specific fixing systems featured in the table * **

DIN guide for D and CH Marine grade plywood support for terminal board for GB

Platea System 102 design P. Castiglioni - M. Cucinella

LIGHTING PROJECTOR SYSTEMS FOR URBAN AREAS WALL SYSTEMS FOR URBAN AREAS

iGuzzini Registered Design (arms)

3140

770

3140

2640

ø102

7000

6000

ø 420

size

1850

colour 15

ø 420

code

colour

poles

1168

1344

code

colour

6800

1543

102

1598

size

1842

code

6000

3000

350

colour 15

ø 620

code

colour

poles

1165

1597

code

length

300 contropiastra fixing plate

colour

8000

size

1842

code

colour 15

ø 620

code

colour

poles

1165

1598

1544 102 1599 127

7000

100

440

150

1000

1000 100

1000

2000

1000 440

150

350

1000 100

1000

2000

440

102

1597

length

L=500 ø 24

hole foro ø151 ø 151

code

length

colour

9000

8000 size

colour 184

5000

310x95

300

184

1542

base for pole

1850

code

186x45

contropiastra fixing plate

fixing plate with anchoring bolts

colour base for pole

size

colour

5600

L=500 ø 24

hole foro ø151 ø 151

184

102

1344

length

base for pole

310x95

contropiastra fixing plate

fixing plate with anchoring bolts

1205

122

4000

code

fixing plate with anchoring bolts

base for pole

code

colour

122

1203 102

length

L=500 ø 24

300

contropiastra fixing plate

186x45

1000

1000 350

800

200

ø159

310x95

hole foro ø151 ø 151

100

150

1000

L=400 ø 18

hole foro ø ø 70 70

310

1064 600 60 220

186x45

base for pole

5000 3500 1064 500 62 250

186x45

ø159

ø127

ø159 186x45

code

8000

ø102

fixing plate with anchoring bolts

ø102

1842

ø 620

code

colour

poles

1165

1599

237

Platea System 102 poles design P. Castiglioni - M. Cucinella

iGuzzini

• Protruding lid with IP54 and 186x45 mm dimensions (for poles codes 1203-1205-1344-1542-1543-1544), or flush IP44 and 310x95 mm dimensions (for poles codes 15971598-1599), all made of die-cast aluminium with seal gasket. • 4-pole terminal block with three connections for each pole and single or double, integrated fuse; designed for 16 mm2 feed cables and 2,5 mm2 exit cables. • Versions (codes 1597-1598-1599) with plate are suitable for Italian, French, Spanish and German terminal blocks (German/Swiss with DIN bar to be ordered separately). • External earthing system with cable lug, steel insert and stainless steel screw. • Terminal block: 1862 IP43 IK08; 1863 IP44 IK08; 1865 IP43 IK08

Barcelona - Spain: Tram station

Photo: Josè Hevia

• Supplied in versions (3,5-5-6-7-8mt) and with a base-plate (5-6-7-8mt). • Made of EN10025-S235JR (codes 1203-1205-1344-1542-1597-15981599) or EN10025-S355JR (codes 1543-1544), 70 micron hot galvanized steel as UNI EN ISO 1461 (EN 40-5) standards. • Powder-coating paint surface finish. • The pole has a cylindrical crosssection with a 102 mm diameter (codes 1203-1205-1344-1542-1543); it is either formed with two cylindrical joints with 127 mm and 102 mm cross sections (codes 1544), welded together or it is formed with two cylindrical joints with ø159 and 102 mm cross sections, (codes 1597/1598/1599) welded together. • 3-4 mm thick. • Cable access slot 150x50 mm (except for 1344). • Anchoring plate is made of 70 micron hot galvanized steel, and has 4 slots. • Anchor bolts and plate (to be ordered separately).

Customised poles for each European market

238

Architectural Lighting

Photo: Giuseppe Saluzzi

iGuzzini

Imola - Italy: Church of Saint Francis Lighting and architectural project: Luciano Ravaglia

239

A new line of spotlights developed as a discreet, yet flexible answer to multiple lighting needs in urban architecture and residential areas. iPro is available in three sizes (small, medium and large body) and is characterised by a compact, essential design that has been especially studied to simplify installation and maintenance operations with minimum visual impact. Invisible gaskets, flush protection glass, pull-out component-plate, simplified opening with captive screws of lid and front frame,

and hidden adjustable bracket are just a few of the many pluses of this line. The wide selection of accessories, which includes spill rings for all the optics, and the practical adjustability of the body convert iPro in a highly flexible product able to guarantee high performance with maximum visual comfort. The use of the innovative Power LED technology, available for the small and medium body, in warm white and neutral white colour temperatures, creates suggestive atmospheres, delivering excellent light output and high energy saving.

MultiPro multiple supports (large body only) page 253

Large

Spill-ring for visual comfort

240

High-performing optics

Low maintenance (long life of LED) for LED version

LED neutral white (4200K)

Medium

LED warm white (3100K)

Small

Adjustability (+95째 / -5째) with hidden bracket

Modularity of accessories

iPro System design Mario Cucinella

iGuzzini

MultiPro horizontal arms large body only) page 253

Flush glass (no water stagnation)

MultiPro flanges (large body only) page 253

Spike (small body)

241

iPro System design Mario Cucinella

iGuzzini

Superspot Optic (SS) A very narrow, exact light beam highlights architectural details with small dimensions from very large distances, including from one building to another.

HIT 70 W G12 d

ill. ab. ø

Emax

Emed

20 m

251 lux

177 lux

35 m

3,5 m

82 lux

58 lux

50 m

5,2 m

40 lux

28 lux

Spot optic (S) Effective lighting to valorise architectural elements with medium dimensions. Ideal to highlight vertical elements with grazing uplight or downlight emission.

HIT (HCI-TC) 35 W G8,5 d

ill. ab. ø

Emax

Emed

15 m

80 lux

55 lux

20 m

45 lux

32 lux

25 m

5,2 m

28 lux

20 lux

Flood optic (F) It is the best solution to provide wide uniform light on architectural elements and façades with mediumlarge size. The picket application is ideal for wide, uniform light in green and residential areas.

HIT (CDM-Tm) 20 W PGJ5

242

ill. ab. ø

Emax

Emed

2,5 m

136 lux

44 lux

10 m

5,2 m

35 lux

23 lux

15 m

15 lux

10 lux

iPro System design Mario Cucinella

Asymmetrical Longitudinal optic (AL) The elliptical distribution enlarges the light beam laterally. Especially suitable for uniform lighting of pathways and transit areas with considerable distance between products.

iGuzzini

Isolux h=5m α=0° d

HIT HCI-TC G8,5 35W L1 L2

AsymmetricalTransversal optic (AT) Ideal to illuminate large surfaces and façades from the ground with uniform emission. The distribution is characterised by asymmetrical beam with maximum intensity at 60° and wide longitudinal and transversal opening.

-1

1,2 0,8

HST-DE 150 W Rx7s

Combined optics The application of multiple products in different sizes and in combination with different optics delivers mixed lighting to enhance the structural elements of building façades. In the example, the spot optic with refractor for elliptical distribution of the light flux exalts horizontal elements, such as cornices, and minimizes shadows, while the flood optic guarantees large, uniform luminous emission. The use of the floodlight with spot optic and cylinder highlights vertical details and ensures clean luminous distribution.

ill. ab. L1xL2

Emax

Emed

8x10 m

200 lux

70 lux

12x14 m

88 lux

32 lux

16x18 m

50 lux

18 lux

Refractor

Cylindrical screen

243

iPro design Mario Cucinella

iGuzzini

Possible installation of accessories Symmetrical optics

Asymmetric al optics

Spill ring • Mounted inside the body of the fitting. • Reduces direct glare from lamp in certain angles. SS - S

F-M

Prismatic glass diffuser for LED and refractor • Mounted inside the body of the fitting. • Glass diffusers: enlarge the natural light cone of the floodlight. • Glass refractors: create blades of light (with spot cones) or vertical or horizontal ellipses (with flood cones) in certain angles. Accessory-frame • Mounted externally on product frame. • Installation of coloured filters only with frame • Can house max. two flat accessories at the same time (i.e. chromatic filter+refractor). Cylindrical screen • Mounted externally with accessory-frame. • Ensures better focusing and definition of light cone and reduces stray light. • 360° screening of light beam. Individual flap • Mounted externally with accessory-frame. • Reduces dispersion of light flux in four directions independently. • Installation of max. four flaps at the same time.

Protection grid • Glass protection against vandalism (IK09).

Lamellar louvre • Mounted externally on product frame. • For AL optic: Reduces glare in front of floodlight and stray light on wall. • For AT optic: Reduces glares on the sides of floodlight. Visor • Mounted externally on product frame. • Reduces dispersion of light flux in three fixed directions. • Rotation by 90° steps L-shaped bracket for cornices • Allows for installing the floodlight in downlight position when applied on horizontal surfaces (i.e. cornices).

Picket and strap • Picket for ground application and strap for application on branches (small body only).

Installation on pole, wall and floor with MultiPro System. • see page 253

Protection grid

Prismatic glass

Glass refractor

Coloured filters Spill-Ring

244

Glass diffuser

Accessory-frame

Cylindrical screen

Visor Lamellar louvre

Directional flaps

iPro design Mario Cucinella

Retention cable for frame

Relamping without removing the accessories

Removable plate with captive screws and lid retention cable

Baku - Azerbaijan: Square

Simplified aiming with graduated scale

Simplified maintenance and accessory installation with a single tool

Suitable for Decostar 51 ES (Osram) and Masterline ES (Philips) Energy Saver

FLOODLIGHTS WALL-MOUNTED FITTINGS IN-GROUND SPIKE FITTINGS

iGuzzini

Pass-through cable (double cable clamp in all sizes)

Class II, with provisions for Class I (on request) with terminal for through earthing wire

• Luminaire with direct emission for metal halide, sodium vapour, halogen and power LED with neutral white (4200K) and warm white (3100K) colour temperature. • Wall/floor installation and ceiling installation with bracket (with plugs). • Installation in ground and on brackets, for small body, with optional picket and strap. • Available in three sizes with large, medium and small body. • The fitting is composed of optical assembly / component-holding box and adjustable bracket. • Optical assembly and front frame made of die-cast aluminium alloy, with acrylic liquid paint (grey) or texturized liquid paint (white) with high resistance to atmospheric agents and UV rays; hardened transparent sodium-calcium safety glass, 5mm thick, siliconed to frame. The frame is fitted to the optical assembly with two M5 captive screws and galvanized steel retention cable. • Circular and asymmetrical longitudinal reflectors made of 99.93% superpure aluminium subjected to anodic oxidation process and polishing. • Asymmetrical transversal reflector made of 99.85% superpure aluminium subjected to anodic oxidation process. • Optical assembly for LED versions composed of circuit complete with 16 (medium body) and 9 (small body) LEDs and plastic lenses. • Component-holding box composed of control gear fitted on removable plate and fast-coupling terminals; back lid made of painted aluminium alloy fixed with four M5 stainless steel captive screws and galvanized steel retention cable.

• Electronic or electromagnetic control gears fixed on removable plate and complete with fast-coupling terminal block for electrical connection. Protection box made of plastic material for versions in class II. • LED versions with circuit complete with plastic lenses and electronic transformer (Vin 100-240V). Spare parts for LED circuit complete with lenses and electronic control gear available for extraordinary maintenance. • 3-pole terminal block with fast-coupling system for electrical connection; versions with double insulation provided with safety box for terminal block. • Ready for through wiring by means of M24 x 1.5 cable glands for cables with ø 7÷16 mm (large and medium body) and PG11 for ø 6,5÷11 mm (small body) made of nickel-plated brass. • Extruded aluminium bracket with silk-screened graduated scale on both sides (easy aiming). • Internal silicone watertight gaskets. • Various accessories available: spill-ring, lamellar louvre for AT and AL optic, visors, flaps, cylindrical screen, glass refractors, glass diffusers and coloured filters with possible application in pairs. • All screws are A2 stainless steel. • The technical characteristics of the fitting comply with EN60598-1 standard. • IP66 IK07 (IK 09 with protection grid) • F seal • ENEC approval • Class of Insulation II (Class I on demand) for electronic versions • Class of Insulation I for electromagnetic versions

245

iPro small body design Mario Cucinella

Registered Design Patent Pending

lamp

optic ,PD[ FG

Floodlight with monochromatic LED BD34 9x1,2 W neutral white S BD35 9x1,2 W warm white S BD36 9x1,2 W neutral white F BD37 9x1,2 W warm white F IP66 IK07

Neutral white = 4200K Warm white = 3100K

/X[ Â&#x192;

Â&#x192;

: 1HXWUDO

Â&#x192; /('

Complete with electronic power supply

Â&#x192;

,PD[ FG

Â&#x192;

: 1HXWUDO

Â&#x192; /('

Â&#x192;

,PD[ FG

Floodlight with electronic transformer BD38 50 W 12 V QR-CBC 51

Â&#x192;

IP66 IK07

Suitable for Energy Saver lamp (Osram Decostar 51 ES and Philips MASTERline ES)

Â&#x192;

45 &%& *8 D Â&#x192;

On demand PAR 20 version (max 50W), Osram Halopar 20 and Sylvania Hi-Spot 63 (code BD39)

,PD[ FG Â&#x192;

Â&#x192;

45 &%& *8 D Â&#x192;

,PD[ FG Â&#x192;

Â&#x192;

45 &%& *8 D Â&#x192;

,PD[ FG .OP

Floodlight with electronic power supply BD32 20 W HIT (PGJ5) SS BD33 20 W HIT (PGJ5) F

Â&#x192;

Â&#x192; &'0 WP 3*-

Â&#x192;

,PD[ FG .OP Â&#x192;

Â&#x192;

Â&#x192; &'0 WP 3*-

246

Â&#x192;

G (P (PD[

(PD[

/X[ .OP Â&#x192;

IP66 IK07

/X[ Â&#x192;

Â&#x192;

(PD[

/X[ Â&#x192;

Â&#x192;

/X[ Â&#x192;

Â&#x192;

& /X[ Â&#x192;

Â&#x192;

(PD[

/X[ .OP Â&#x192;

140 132

code

170

FLOODLIGHTS WALL-MOUNTED FITTINGS IN-GROUND SPIKE FITTINGS

iGuzzini

iPro small body design Mario Cucinella

FLOODLIGHTS WALL-MOUNTED FITTINGS IN-GROUND SPIKE FITTINGS

iGuzzini

accessories and installation systems code

code

Accessory-frame BZ49

Individual flap BZ58*

Available in colours 01-15

Available in colour 04

Refractor for elliptical distribution of the light flow BZ53*

Protection grid BZ56* Available in colour 13

Available in colour 24

Glass diffuser BZ51* for BD32-BD33-BD38

Spill ring for optic super spot/spot BZ54 for BD32

Available in colour 65

Available in colour 04

Prismatic glass diffuser for LED versions BZ52*

Spill ring for medium/flood optic BZ55 for BD33

Available in colour 24

Available in colour 04

Coloured filters BZ50*

Spike for ground application BZ60

Available in colours 05-06-09

Available in colour 00

Cylindrical screen BZ57* for BD32-BD38

Strap for attaching to branches Section=40÷120 mm BZ61

Available in colours 47-74

Available in colour 00

Visor BZ59

L-shaped bracket for cornices BZ62

Available in colour 04

Available in colour 15 (colour 01 on request)

* Installed with accessory-frame

Possible combinations for installation of accessories coloured filter luminaires

power

optic

20 W HIT (PGJ5)

S/F

50 W QR-CBC 51

S/M/F/WF

9x1,2 W LED

•

installation permitted

•

glass diffuser/refractor

spill ring

spill ring + coloured filter + glass coloured filter + coloured filter + coloured filter diffuser/refractor cylindrical screen no. directional flaps

on accessoryon accessorycoloured filter on on accessoryinside the body inside the body holding frame holding frame accessory-holding frame holding frame

S/F

• • •

on accessoryholding frame

• • •

for S for S

installation not permitted 247

iPro medium body design Mario Cucinella

Registered Design Patent Pending

lamp

optic ,PD[ FG

Floodlight with monochromatic LED BD46 16x1,2 W neutral white S BD47 16x1,2 W warm white S BD48 16x1,2 W neutral white F BD49 16x1,2 W warm white F IP66 IK07

Neutral white = 4200K Warm white = 3100K

/X[ Â&#x192;

Â&#x192;

: 1HXWUDO

Â&#x192; /('

Complete with electronic power supply

Â&#x192;

,PD[ FG Â&#x192;

: 1HXWUDO

Â&#x192; /('

Floodlight with electromagnetic power supply BD44 35 W HIT (G8,5) BD45 35 W HIT (G8,5)

Â&#x192;

,PD[ FG .OP Â&#x192;

Â&#x192;

To be used only with Osram and G.E. lamps

Â&#x192; +,7 &'0 7& * D Â&#x192;

,PD[ FG .OP Â&#x192;

Â&#x192;

Â&#x192; +,7 &'0 7& * D Â&#x192;

,PD[ FG .OP Â&#x192;

Â&#x192;

Â&#x192; +,7 &'0 7& * D Â&#x192;

,PD[ FG .OP Â&#x192;

Â&#x192;

Â&#x192; +,7 &'0 7& * D Â&#x192;

,PD[ FG .OP Â&#x192;

Â&#x192;

Â&#x192; +,7 &'0 7& * D Â&#x192;

,PD[ FG .OP Â&#x192;

(PD[

/X[ .OP

Â&#x192;

IP66 IK07

Floodlight with electronic power supply BD43 35 W HIT (G8,5) AL

/X[ .OP

Â&#x192;

IP66 IK07

Floodlight with electronic power supply BD42 35 W HIT (G8,5) M

& J Â&#x192; Â&#x192;

Â&#x192;

/X[

IP66 IK07

Â&#x192;

On demand PAR 20 version (max 100 W) (code BD50) and TC-TEL (18 W) (code BD51)

248

: +,7 &'0 7& * D Â&#x192; Â&#x192;

Do not use with CMH-GE lamps

165

/X[ .OP

Â&#x192;

IP66 IK07

Floodlight with electronic power supply BD41 35 W HIT (G8,5) S

(PD[

/X[ .OP

Â&#x192;

Floodlight with electronic power supply BD40 35 W HIT (G8,5) SS

/X[ .OP

Â&#x192;

S M

IP66 IK07

/X[ Â&#x192;

Â&#x192;

155

code

198

FLOODLIGHTS WALL-MOUNTED FITTINGS

iGuzzini

iPro medium body design Mario Cucinella

FLOODLIGHTS WALL-MOUNTED FITTINGS

iGuzzini

accessories and installation systems code

code

Accessory-frame BZ63

Individual flap BZ73*

Available in colours 01-15

Available in colour 04

Refractor for elliptical distribution of the light flow BZ67*

Protection grid BZ71* Available in colour 13

Available in colour 24

Glass diffuser BZ65* for BD40-BD41-BD42-BD43-BD44-BD45

Lamellar louvre for asymmetrical longitudinal optic BZ75 for BD43

Available in colour 65 Available in colour 04 Prismatic glass diffuser for LED versions BZ66*

Spill ring for optic Superspot and Spot BZ68 for BD40-BD41-BD44

Available in colour 24

Available in colour 04

Coloured filters BZ64*

Spill ring for Medium and Flood optic BZ69 for BD42-BD45

Available in colours 05-06-09 Available in colour 04

L-shaped bracket for cornices BZ76

Cylindrical screen BZ72* for BD40-BD41-BD44

Available in colour 15 (colour 01 on request )

Available in colours 47-74

* Installed with accessory-frame

Visor BZ74 Available in colour 04

* Installed with accessory-frame

Possible combinations for installation of accessories coloured filter luminaires

power

optic

35 W HIT (G8,5)

SS/M/F/AL

16x1 W LED

S/F

• installation permitted

glass diffuser/refractor

spill ring

spill ring + coloured filter + glass coloured filter + coloured filter + coloured filter diffuser/refractor cylindrical screen no. directional flaps

on accessoryon accessorycoloured filter on on accessoryinside the body inside the body holding frame holding frame accessory-holding frame holding frame

• •

on accessoryholding frame

• •

for SS/S for SS/S

• installation not permitted 249

iPro large body design Mario Cucinella

Registered Design Patent Pending

lamp

optic

Floodlight with electromagnetic power supply BD57 70 W HIT (G12) BD58* 70 W HIT (G12) BD59 150 W HIT (G12) BD61* 150 W HIT (G12) BD62 150 W HIT-DE/HST-DE

,PD[ FG .OP

S F S F AT

/X[ .OP

Â&#x192;

Â&#x192; +,7 &'0 7 * D Â&#x192;

,PD[ FG .OP

IP66 IK07

Â&#x192;

* The Flood optic becomes Medium with HCI-T Powerball (Osram). :

Â&#x192; +,7 &'0 7 * D Â&#x192;

,PD[ FG .OP

& J Â&#x192; Â&#x192;

Â&#x192;

(PD[

Â&#x192;

(PD[

/X[

Â&#x192; +,7 '( 5[ V

Â&#x192; Â&#x192;

,PD[ FG .OP

Floodlight with electronic power supply BD52 70 W HIT (G12) SS

Â&#x192;

IP66 IK07 :

Â&#x192; +,7 &'0 7 * D Â&#x192;

,PD[ FG .OP

Floodlight with electronic power supply BD53 70 W HIT (G12) S

Â&#x192;

IP66 IK07 :

Â&#x192; +,7 &'0 7 * D Â&#x192;

,PD[ FG .OP

Floodlight with electronic power supply BD54 70 W HIT (G12) F

Â&#x192;

IP66 IK07

The Flood optic becomes Medium with HCI-T Powerball (Osram).

Â&#x192; +,7 &'0 7 * D Â&#x192;

,PD[ FG .OP

Floodlight with electronic power supply BD55 70 W HIT-DE AT

& J Â&#x192; Â&#x192;

Â&#x192;

Floodlight with electronic power supply BD56 70 W HIT (G12) AL

Â&#x192; Â&#x192;

(PD[

& J Â&#x192; Â&#x192;

/X[

Â&#x192;

/X[

Â&#x192;

250

IP66 IK07

+,7 &'0 7 *

Â&#x192;

,PD[ FG .OP

: D

IP66 IK07

+,7 '( 5[ V

To be used exclusively with light sources with ceramic burner.

/X[ .OP

Â&#x192;

/X[ .OP

Â&#x192;

/X[ .OP

Â&#x192;

200

/X[ .OP

Â&#x192;

Â&#x192; Â&#x192;

192

code

iPro large body can be applied on columns with Sistema MultiPro horizontal arms

244

FLOODLIGHTS WALL-MOUNTED FITTINGS

iGuzzini

iPro large body design Mario Cucinella

FLOODLIGHTS WALL-MOUNTED FITTINGS

iGuzzini

accessories and installation systems code

code

Accessory-frame BZ77

Protection grid BZ85*

Available in colours 01-15

Available in colour 13

Refractor for elliptical distribution of the light flow BZ80*

Lamellar louvers for asymmetrical transversal optic BZ89 for BD55-BD62

Available in colour 24 Available in colour 04 Glass diffuser BZ79*

Lamellar louvers for asymmetrical longitudinal optic BZ90 for BD56

Available in colour 65

Available in colour 04 Spill ring for optic Superspot and Spot 6879 for BD52-BD53-BD57-BD59

Coloured filters BZ78* Available in colours 05-06-09

Available in colour 04

Cylindrical screen BZ86* for BD52-BD53-BD57-BD59

Spill ring for Medium Flood optic 6881 for BD54-BD58-BD61

Available in colours 47-74

Available in colour 04

Visor BZ88

Spill ring for asymmetrical longitudinal optic BZ84 for BD55-BD62

Available in colour 04

Available in colour 04 Individual flap BZ87*

L-shaped bracket for cornices BZ91

Available in colour 04

Available in colour 15 (colour 01 on request)

* Installed with accessory-frame

Possible combinations for installation of accessories coloured filter luminaires

power

optic

SS/S/F AT/AL S 150 W HIT (G12) F 150 W HIT/HST-DE

•

spill ring

spill ring + coloured filter + glass coloured filter + coloured filter + coloured filter diffuser/refractor cylindrical screen no. directional flaps

on accessoryon accessorycoloured filter on on accessoryinside the body inside the body holding frame holding frame accessory-holding frame holding frame

70 W HIT (G12)

installation permitted

glass diffuser/refractor

AT installation not permitted

• • • • •

• • •* •* •

• • • • •

on accessoryholding frame

• • • • •

* To be used exclusively with light sources with ceramic burner

251

Architectural Lighting

Photo: G端nter Laznia, ARTCOM Architekturfotografie

iGuzzini

Zurigo - Switzerland: Sihlcity Lighting project: Reflexion AG Architectural project: Theo Hotz AG

252

MultiPro design Mario Cucinella

LIGHTING PROJECTOR SYSTEMS FOR URBAN AREAS iGuzzini

• System with direct emission for metal halide, sodium vapour. • Fixture can be installed on a poleor wall-mounted . • Composed of optical assembly (iPro large body). flanges for installation on column and supports for installation in floor, wall and ceiling. • Optical assembly and front frame made of die-cast aluminium alloy, with acrylic liquid paint (grey) or texturized liquid paint (white) with high resistance to atmospheric agents and UV rays; hardened transparent sodium-calcium safety glass, 5mm thick, siliconed to frame. The frame is fitted to the optical assembly with two M5 captive screws and galvanized steel retention cable. • Circular and asymmetrical longitudinal reflectors made of 99.93% superpure aluminium subjected to anodic oxidation process and polishing. • Asymmetrical transversal reflector made of 99.85% superpure aluminium subjected to anodic oxidation process. • Component-holding box composed of control gear fitted on removable plate and fast-coupling terminals; back lid made of painted aluminium alloy fixed with four M5 stainless steel captive screws and galvanized steel retention cable. • Electromagnetic (class) and electronic (class I) control gears.

115

40 115

• 3-pole terminal block with fast-coupling system for electrical connection; versions with double insulation provided with safety box for terminal block. • Ready for through wiring by means of M24 x 1.5 cable glands for cables with ø 7÷16 mm. • Extruded aluminium bracket with silk-screened graduated scale on both sides (easy aiming). • Internal silicone watertight gaskets. • Fixing flanges in painted aluminium alloy for installation of supports without drilling the pole. • All screws are A2 stainless steel. • The technical characteristics of the fitting comply with EN60598-1 standard. • IP66 IK07 (IK 09 with protection grid) • F seal • ENEC approval • Class of Insulation I/II

40 40

Projector-bracket rotation

Bracket rotation by 40° steps

253

MultiPro flanges design Mario Cucinella

iGuzzini

The possible combination of poles, projectors and accessories ensures the high flexibility of the system.

iPro large body

Flanges for pole mounting are available for single or double composition.

The pole is available in two versions, with fixing plate or for burying.

254

MultiPro wall-mounted design Mario Cucinella

iGuzzini

The wall application - thanks to the two different lengths of the multiple supports - is the ideal solution when no pole installation is possible.

iPro large body

The multiple wall supports are available for the application of two or three projectors.

For permitted rotations see the instructions sheet

sales order

The commercial order should be completed based on the elements making up the system.

Pole version palo pole

Wall-mounted version flangia flange

proiettore floodlight

supporto multiplo multiple support

proiettori floodlight

255

MultiPro horizontal arms design Mario Cucinella

iGuzzini

iPro large body

iPro large body can be installed above and below, maximum four floodlights for double arm and two for individual arm. For the correct installation of the luminaires, always consult the instruction sheet provided with product and poles. For different applications the maximum number of floodlights permitted on pole depends on installation conditions (wind thrust, ground type, etc.). iGuzzini can provide stability calculations for all installation conditions.

Accessory for complete rotation of floodlight on horizontal plane. For permitted rotations see the instructions sheet.

The pole is available in two versions, with fixing plate or for burying.

sales order

The commercial order should be completed based on the elements making up the system.

palo pole

braccio orizzontale horizontal arms

+ oppure or +

256

proiettore floodlight

Architectural Lighting

Photo:with kind permission from SLA

iGuzzini

Copenhagen, Denmark: 1001 trees for Copenhagen Architectural project: SLA - Stig L. Andersson, Rasmus Astrup, Friedemann Rüter, Thomas Kock, Salka Kudsk, Signe Høyer Frederiksen, Michelle Nielsen-Dharmaratne, Cecilie Milsted Lind, Simone Maxl and Martin Søberg

257

9000

7000

5000

All compositions illustrated are purely indicative; the maximum number of projectors depends on the conditions of the installation point and should be verified as the need arises.

scale 1:100 scala 1:100

Projectors iPro large body are shown on page 245.

6114 L=795

102

6117 L=785

for 2 floodlights

120

6115 L=178

102

6118 L=160

6119*

6111 119x165

120

6013 156x180

102

6112 126x165

6014

6015

228 228

L ø 60

adapter disk

counter flange

102

code

1560

120

6012 149x180

Multiple support for three floodlights

146

6116 L=390

120

Multiple support for two floodlights

960

102 L

code

146

6113 L=400

ø poles

120

Flange

code

for 1 floodlight

ø pole

for 2 floodlights

for 1 floodlight

Horizontal arm

* Allows for complete rotation of floodlight on horizontal arm

base for poles

ø 420

code 1842

1292

poles colour

size 184

1841

258

poles colour

size 122

code

base for poles

1597 1598 1599

ø 620

1843

1547

MultiPro

LIGHTING PROJECTOR SYSTEMS FOR URBAN AREAS

design Mario Cucinella

iGuzzini

ø102

ø120

7000

6000

5000

310x95

length

102

5600

1291 1292

colour

5000

code

length

102

6800

1561

102 159

6800

1597

ø159

310x95

1544 102-127

9000

1565

9000

1599

102 159

350

1292

1165

1597-1598 1599-1547

440

350

2000

1000 1000 150 350

440

102 159

1598

terminal box code colour poles 1862 1865

1862 1865

1205 1542 1561 1543 1544 1597 1562 1598 1565 1599 1545 1547 1291 1292 1597 1287 1598 1599 1288 1545 1547

colour

8000 15 7000

door key code

colour

0227

0246 00

0246

300

1545 1547

colour

Branch box for multiple wiring fitted on a pole

120 194

10000

code

1880

9000

accessories for terminal block

accessories for terminal block code

colour

length 10000

1288

D - CH

1168

8000

100

150

code

colour

8000

poles

1562

length

fixing plate contropiastra

fixing plate with anchoring bolts code

120

L=500 ø 24

300

length

8000

310x95

hole foro 188 øø188

100

440

300

code

1863

fixing plate contropiastra

code

102

1000 L=500 ø 24

hole foro ø 151 ø 151

1543

colour

ø194

310x95

1000

350

1000

150

1000 350

150

length

ø120

ø194

186x45

3000

186x45

ø194

1287

3200

ø159

code

6000

ø120

L=500 ø 24

hole foro ø 151

ø102

8000

ø127

310x95

fixing plate contropiastra

colour

9000

ø102

300

1542

ø120

ø102

ø159

310x95

fixing plate contropiastra

5600

120

1000

2000 440 50

B943

code

poles 1542-1543-1544-1545 1547-1561-1562-1565 1597-1598-1599

code 1205

L=500 ø 24

hole foro ø 151

fixing plate contropiastra

ø159 186x45

150

350 50

200

1000 150 350

ø 100

310

1000

L=400 ø 18

hole foro ø 80

150

600

600 62 250

1000

186x45

310x95

100

ø159

310x95

1000

186x45

ø159

1000

310x95

100

310x95

1000

ø102

7000

ø120

ø102

ø120

poles

B944

1542-1543-1544-1561-1562 1565-1597-1598-1599

B972

1545-1547

Poles with plate are suitable for the F and E markets

259

MultiPro poles design Mario Cucinella

iGuzzini

• Made of EN10025-S235JR (codes 1542-1561-1562-1565) or EN10025-S355JR (codes 15431544), 70 micron hot galvanized steel as UNI EN ISO 1461 (EN40-5). • Powder-coating paint surface finish. • The pole has a cylindrical crosssection with a 102mm diameter (1542-1543); it is either formed with two cylindrical joints with ø 127 and 102 mm, cross sections, welded together (1544); or it is formed with two cylindrical joints with ø 159-102 mm (codes 15971598-1599- 1561-1562-1565) • The upper part of the pole is provided with six through holes and stainless steel threaded inserts for arm fixing with tie rod. • 4 mm thickness (poles 1542-15431544-1599-1565 with 3 mm thickness (1597-1598-1561-1562) • Cable access slot 150x50 mm. • Anchoring plate made of 70 micron hot galvanized steel, with 4 slots. • Anchor bolts and plate (to be ordered separately). • Raised inspection lid IP54 186x45 mm (codes 1542-1543-1544) or flush inspection IP44 310x95 mm (1597-1598-1599-1561-1562-1565) • 4-pole terminal block with three connections for each pole and single or double integrated fuse; designed for 16 mm2 feed cables and 2,5mm2 exit cables. • Poles (1597-1598-1599) suitable for Italian, French and Spanish terminal blocks, poles (1561-1562-1565) suitable for German/Swiss and English terminal blocks (with wooden adapter and DIN bar to be ordered separately); poles (1542-1543-1544) suitable for Italian terminal blocks. • Internal grounding system (1597-1598-1599-1561-1562-1565) or external grounding system (15421543-1544) with grounding lug, steel insert, and stainless steel screw. • Terminal block: IP43 IK08 (1862/1865).

Flush inspection lid IP44

260

Protruding inspection lid IP54

Available in buried versions or with plate with following heights: 9 m, 10 m and 12m. • Made of EN10025-S355JR (codes 1545-1546-1547-15481552-1554),70 micron hot galvanized steel as UNI EN ISO 1461(EN 40-5). • Powder-coating paint surface finish. • Made of two cylindrical sections with ø 194-120 mm (codes 1545-1547). • The upper part of the pole is provided with six through holes and stainless steel threaded inserts for tie rod fixing. • 3-4 mm thickness. • 150x50 mm slot for cable entrance. • Anchoring plate made of 70 micron hot galvanized steel, with 4 slots. • Anchoring plate and bolts (to be ordered separately). • Flush inspection lid 310x95 mm (for poles with codes 1545-15471597-1598-1599-1287-1291). • 4-pole terminal block with three connections for each pole and single or double integrated fuse; designed for 16mm2 feed cables and 2,5mm2 exit cables. • Versions with h=9/10/12 m and 6/7/8 with plate are suitable for Italian, French, Spanish and English terminal blocks (with wooden adapter to be ordered separately) and German/Swiss (with DIN bar to be ordered separately). • Internal earthing system (for poles h=9/10/12 m) with earthing lug, steel insert and stainless steel screw. • Terminal block: IP44 IK08 (for poles with h=9/10/12 m.

Architectural Lighting

Photo: Josè Hevia

iGuzzini

Barcelona - Spain: Tibidabo Park Lighting project: Pablo Martínez Architectural project: Miàs arquitectes

261

W-Saving design Gitronica

FLOW REGULATOR iGuzzini

• More overall reliability of the system because an anomaly of the single regulator does not compromise power, efficiency, and total energy savings. • The use of components that are technologically simple reduces maintenance procedures to a minimum. • W-Saving is available in the version with full power at the first step (230V), and up to 8% energy savings (220V) in the version that allows for it, at the first step. Installation occurs exclusively with an electromagnetic power supply. • W-Saving has: - Mains voltage 230V +/-10% 50/60Hz - Operations temperature -20°... +35°C - Battery CR2032 - System cable FG70R 3x1,5 mm2 and length of 0,5 m - lamp cable FG70R 3x1,5 mm2 and length of 0,5 m • IP 55 • CE Seal • Compliant with 60730-2-7 standard

Naples - Italy: Corso Novara

Photo: Enrico Lattanzi

Light flow regulator for exterior lighting, for high pressure sodium vapour lamps, high pressure mercury vapour lamps with a maximum power of 250 W. A sophisticated software is coupled with technologically simple components in order to guarantee that each pole has lighting that has top functionality and yield. • Customized programming for every single pole, in order to satisfy the different usage needs and to save energy. Based on the time and the application, an internal calendar, and three different pre-set cycles, the customized programming manages the lamp’s light flow in 5 different levels and in all the programmed phases. • Energy savings up to 40%. According to the programme that is set, the user can modulate the tension guaranteeing always an adequate level of service. • Reduction of environmental impact is guaranteed by energy savings that translates automatically in reduced CO2 emissions. • Powers the fitting of light within the optimal operations phase that is declared by the lamp manufacturers, ensuring longer lamp life and better service quality.

Easy installation

262

W-Saving design Gitronica

Streets with heavy vehicular traffic or Public parking. The local laws for energy savings and street lighting norms require that we adopt minimum lighting levels for automobile traffic during the day, in order to optimize energy savings and reduce environmental pollution. At the same time we are increasing traffic safety. (Default cycle)

iGuzzini

CO2 emission -135 kg for year with a 250W high pressure sodium vapour lamp.

120% 100% 80% 60% 40% 20% 0% 14:24 16:48 19:12 21:36

0:00

2:24

4:48

7:12 9:36

800 700 600 500 400 300 200 100 0 1

Operations cost comparison of a system that uses W-Saving technology (blue line) and a system that uses a traditional lighting system (red line)

Public parks and Historical districts For public park and historical district lighting, energy savings are tied directly to set lighting cycles. Depending upon the time of day and season, lighting needs will differ and energy savings are a result of this. These locations do not have particular norms that govern lighting.

CO2 emission - 42,5 kg for year with a 100W high pressure sodium vapour lamp.

120% 100% 80% 60% 40% 20% 0% 18:00

21:00

0:00

3:00

6:00

9:00

300,0 250,0 200,0 150,0 100,0 50,0 0,0 1

Operations cost comparison of a system that uses W-Saving technology (blue line) and a system that uses a traditional lighting system (red line)

TOURIST AREAS In tourist and resort areas, lighting levels will be subject to variations. They are reduced on large streets, squared, or smaller streets during low traffic times, especially in low season. Lighting levels will be elevated during high season.

CO2 emission - 46 kg for year with a 100W high pressure sodium vapour lamp.

120% 100% 80% 60% 40% 20% 0% 17:00

21:00

0:00

3:00

6:00

9:00

500,0 450,0 400,0 350,0 300,0 250,0 200,0

150,0 100,0 50,0 0,0

Operations cost comparison of a system that uses W-Saving technology (blue line) and a system that uses a traditional lighting system (red line)

263

W-Saving

FLOW REGULATOR

design Gitronica

iGuzzini Registered Design Patented

output voltage

103

Flow regulator BG42 230 V BG43 220 V IP55

code

238 254

Available in colour 00 Serial programming interface + Win Saving 1.0 Software code G886 Default cycle (page 263)

accessories code

code

Fixing spring for flux regulator on poles BZC1 for poles with diam. from 121 to 138 mm

Fixing spring for flux regulator on poles BZG0 for poles with diam. from 139 to 160 mm

Available in colour 00

Fixing spring for flux regulator on poles BZG1 for poles with diam. from 161 to 194 mm

Connector BZG2

Available in colour 00

Win Saving + USB cable G886 Software for the programming and simulation of energy saving for W-Saving - Possibility to select 3 different preset cycles of energy saving - Possibility to create a personalized cycle - Possibility to simulate the real functioning and calculate the energy save obtained Available in colour 00

264

IP68

Available in colour 00

Architectural Lighting

Photo: Ole Ziegler

iGuzzini

Stenmagle, Denmark The new Headquarters of DBI Plastics Lighting and architectural project: Architetto MAA Anders Noehr KHR architecs

265

Pole application

Ground installation

266

Lingotto design Renzo Piano

iGuzzini

Wall application

The design project draws its inspiration from a basic geometric shape: an irregular truncated pyramid made of cast aluminium. All the elements comprising the lamp are highlighted without resorting to purely aesthetic means. In this sense, Lingotto optimises the Large and small optical assembly

Wall-washer screen

link of the image of the product with the various lighting engineering requirements. The fitting comprises two essential parts: the light source fitted with a special reflector and a bar on which the optical assembly can be rotated with a bolt.

Baffle

267

Lingotto design Renzo Piano

iGuzzini

Installation outdoors is possible with two solutions: the floodlight, equipped with three different optics (asymmetrical, flood and medium) designed to adapt themselves to the most varied of spaces and the wall-mounted unit which only uses the flood optic.

A silicon sealing gasket ensures an IP 66 degree of protection. The luminous flux emitted upwards by the Lingotto luminaire pointing downwards with 0 angle is nil.

Asymmetrical Optic (A) Emits its greatest intensity of light at 45째. It is suitable for lighting up urban areas because, in limiting direct glare, it enables large spaces to be illuminated without producing stray light striking the fronts of buildings.

HIT-DE 250 W Fc2 L2

ill. ab. L1xL2

Emax

Emed

5 x 10 m

280 lux

160 lux

7 x 14 m

120 lux

80 lux

9 x 18 m

80 lux

40 lux

ill. ab. L1xL2

Emax

Emed

3,5 x 8 m

340 lux

175 lux

5 x 12 m

155 lux

77 lux

7 x 16 m

88 lux

45 lux

Flood Optic (F) Provides a broad, uniform light which is particularly suitable for illuminating squares, facades and large spaces.

HIT-DE 250 W Fc2

Emed = average lighting in the area Emax = imax lighting in the area

268

Lingotto

FLOODLIGHTS iGuzzini

An optional painted aluminium control gear box is connected to the optical assembly by a armoured braided steel cable. Polymeric grey plastic PG11 cable clamp and brass PG11 on the other end. • Pull-out aluminium control gear plate, subjected to a pre-anodizing and degreasing treatment; power supply with a non-explosive power factor correction capacitor, ballast, starter, and quick-connecting terminals. • There is no light dispersion into the upper hemisphere above this luminaire • All screws are A2 stainless steel. • Rod with wishbone end and grey-painted galvanized steel articulated joint. • The technical characteristics of the fitting comply with EN60598-1 standard. • IP66 IK07 • F seal • ENEC approval • Class of Insulation II

Photo: Giuseppe Saluzzi

• Direct lighting luminaire for use with metal halide, sodium discharge and halogen lamps • The fixture is installed into the ground or wall-mounted. • Lingotto has an optical assembly, a control gear box (for models with discharge lamps), and an arm. • Optical assembly and aluminium glass-holding frame, especially designed for perfect coupling to the chassis, with dual phosphoruschromium plating of the base metal, followed by passivation heat treatment at 120° C, grey painting, curing at 150° C. Sodium-calcium tempered sealing glass, colourless and transparent. An articulated joint is used to adjust the vertical orientation of the cover with 180° range, and the horizontal orientation with 360° range. Steel retention cable, diameter of 1,6 mm, plasticcoated. 50 Shore silicone-coated black gasket; parabolic reflector made of aluminium sheet with a high-bright natural finish.

Ascoli Piceno - Italy: Piazza del Popolo

design Renzo Piano

Adjustable product

269

Lingotto

FLOODLIGHTS

design Renzo Piano

iGuzzini Registered Design

optic ,PD[ FG .OP

& J Â&#x192; /X[ .OP Â&#x192;

Â&#x192;

IP66 IK07 :

Â&#x192; +,7 '( 5[ V

Â&#x192; Â&#x192;

G (P (PD[

240

lamp

Floodlight - Small optical assembly 7027 150 W HIT-DE F 150 W HST-DE F

500

code

147 180

Â&#x192;

Â&#x192; Â&#x192; Â&#x192;

Â&#x192; D

Â&#x192; Â&#x192;

Â&#x192;

Â&#x192; D

Â&#x192; Â&#x192;

,PD[ FG .OP

Floodlight - Large optical assembly 7019 250 W HIT-DE A 250 W HST-DE 7020 400 W HIT-DE A

Â&#x192;

IP66 IK07

Â&#x192; +,7 '( )F

Â&#x192; Â&#x192;

,PD[ FG .OP

Â&#x192;

Â&#x192; +,7 '( )F

Â&#x192; Â&#x192;

,PD[ FG .OP

Floodlight - Small optical assembly 7028 300 W QT-DE F

Â&#x192;

Â&#x192; 47 '( 5[ V

270

Â&#x192; 47 '( 5[ V

Â&#x192; Â&#x192;

230

G (P (PD[

& J Â&#x192; /X[ .OP Â&#x192;

Â&#x192;

IP66 IK07

Complete with electrical wire L=450 mm

Â&#x192; Â&#x192;

,PD[ FG .OP

Floodlight - Small optical assembly 7018 300 W QT-DE A

G (P (PD[

IP66 IK07

Complete with electrical wire L=450 mm

& J Â&#x192; /X[ .OP Â&#x192;

Â&#x192;

& J Â&#x192; /X[ .OP Â&#x192;

Â&#x192;

& J Â&#x192; /X[ .OP Â&#x192;

Â&#x192;

& J Â&#x192; /X[ .OP

: +,7 '( )F

147

,PD[ FG .OP Â&#x192;

350

+,7 '( )F

310

Â&#x192;

IP66 IK07

& J Â&#x192; /X[ .OP Â&#x192;

Â&#x192;

600

,PD[ FG .OP

Floodlight - Large optical assembly 7029 250 W HIT-DE F 250 W HST-DE 7030 400 W HIT-DE F

G (P (PD[

Â&#x192;

240

G (P (PD[

170 215

270

+,7 '( 5[ V

120

IP66 IK07

270

& J Â&#x192; /X[ .OP

120

,PD[ FG .OP

Floodlight - Small optical assembly 7017 150 W HIT-DE A 150 W HST-DE A

Lingotto

FLOODLIGHTS

design Renzo Piano

iGuzzini Registered Design

lamp

optic ,PD[ FG .OP

Floodlight - Small optical assembly 7012 150 W HIT-DE F 150 W HST-DE

& J Â&#x192; /X[ .OP Â&#x192;

Â&#x192;

IP66 IK07 :

The electrical connections between the control gear box and the floodlight are achieved through an armoured cable.

Â&#x192; +,7 '( 5[ V

Â&#x192; Â&#x192;

G (P (PD[

680

code

695

accessories and installation systems code ,PD[ FG .OP

Baffle 1177 for 7012-7017-7018-7027-7028 Available in colour 04 The photometric curve refers to the flood optic.

& J Â&#x192; /X[ .OP Â&#x192;

Â&#x192;

Â&#x192; D

Â&#x192; Â&#x192;

,PD[ FG .OP

Â&#x192;

Wall-washer screen 1175 for 7019-7020-7029-7030 1176 for 7012-7017-7018-7027-7028

Â&#x192; +,7 '( )F

Â&#x192; Â&#x192;

G (P (PD[

& J Â&#x192; /X[ .OP Â&#x192;

Â&#x192;

Available in colour 04 The photometric curve refers to the flood optic.

Â&#x192; Â&#x192;

,PD[ FG .OP

Baffle 1178 for 7019-7020-7029-7030

: D

G (P (PD[

& J Â&#x192; /X[ .OP Â&#x192;

Â&#x192;

47 '( 5[ V

: +,7 '( 5[ V

Â&#x192;

G (P (PD[

Steel plate for fixing to wall 1172 for 7017-7019-7020-7027-7029-7030 Available in colour 00

Available in colour 04 Steel flange for attaching to pole Ă¸ 40 Ă¸ 60 mm 1170 for 7017-7018+1179-7019-7020-7027 7028+1179-7029-7030 Steel flange for attaching to pole Ă¸ 60 Ă¸ 102 mm 1171 for 7017-7018+1179-7019-7020-7027 7028+1179-7029-7030 Available in colour 00

Fixing box with terminal board 1179 for 7018-7028 Available in colour 15 Cast-iron plate for fixing to ground and/or wall 1173 for 7017-7019-7020-7027-7029-7030 Available in colour 15 Bolts with plate for fixing to ground 0456 for 1173 Available in colour 00 271

Lingotto design Renzo Piano

FLOODLIGHTS iGuzzini

7027

7027+1177

Lux h=5 m. α =0°

201 130 62 26 11

125 86 51 35 21 10

HIT-DE Rx7s 150W

-10

-8

-6

-4

-2

10 m

-5

-4

-3

-2

-1

7029

7029+1178

Lux h=5 m. α =0°

284 183 88

HIT-DE Fc2 250W

-10

-8

-6

-4

-2

36 16

198 170143

HIT-DE Fc2 250W

10 m

-5

-4

-3

-2

-1

7030

93 70 49

7019

Lux h=5 m. α =0°

165 106 51

398 256 123 51 23

HIT-DE Fc2 400W

-10

-8

-6

-4

-2

21 10

HIT-DE Fc2 250W

10 m

-10

-8

-6

-4

-2

7020

10 m

7028

Lux h=5 m. α =0°

87 231 149 72

27 20 14

30 13

HIT-DE Fc2 400W

QT-DE 12 Rx7s 300W

-10

-8

-6

-4

-2

10 m

-5

-4

-3

-2

-1

7028+1177

10 m

7012

Lux h=5 m. α =0°

201 130 62 26 11 47

QT-DE 12 Rx7s 300W

-5

-4

-3

-2

-1

38 23

HIT-DE Rx7s 150W

7012+1177 Lux h=5 m. α =0°

106 86 51

HIT-DE Rx7s 150W

-5

272

-4

-3

-2

-1

-10

-8

-6

-4

-2

Architectural Lighting

Photo: Giuseppe Saluzzi

iGuzzini

Baku - Azerbaijan: The Sanctuary of Bibieybat

273