Step-by-Step Peel Application Step 1
Cleanse the eye area with the Enhancing Eye Makeup Remover applied to a damp cotton pad. Hold pad on the eye area to dissolve makeup and gently wipe inward to remove.
Step 2
To remove facial makeup, apply the Enhancing Creamy Cleanser to the skin and massage in upward circular motions. Remove with damp cotton or micro fiber mitts.
Step 3
Apply the corrective Clarifying Cleanser to the entire face and massage in upward circular motions with wet palms to deep cleanse the skin. Remove with damp cotton or micro fiber mitts.
Step 4
De-grease the skin with Peel Prep Solution on a dry cotton pad buffing the skin using light pressure, a section at a time, counting the number of passes for preparation. Six passes over an area is usually enough abrasion to sufficiently remove all superficial oil that may prevent penetration.
Optional: Micro Crystal Polish for greater exfoliation and peel penetration.
Step 5
Optional: Dermaplane to remove superfluous hair and exfoliate layers of dead skin cells increasing penetration and absorption of the peel solution. Clean skin with a damp cotton pad.
Step 6
Pour approximately 1 tablespoon of the selected peel solution into a glass bowl. Apply the solution beginning with the forehead in vertical and horizontal strokes from the eyebrow to the hairline making sure the solution is evenly distributed. Methodically move around the face, as shown in the diagram below.
Step 7
For acid and chemical peels cool the skin with a motorized fan. TCA solution may be cooled with either a fan or ice water compresses. Cooling the skin creates client comfort while the peel activates and processes. After approximately 10 minutes, the chemical solution will begin to self neutralize.
Step 8
Apply the Bio-Derm Nutri Gel for oily skin and Bio-Derm Nutri Oil for dry skin. Layer a generous amount of Protective Cream and Brightening Moisturizer post peel.