ES420 Corner Rounder
CORNER ROUNDER
An inexpensive invaluable tool to meet the demand for a quick corner rounding facility for plastic/metal labels and front panels. The table is effectively split into two halves, each containing 90 degree stops, in the angle of each is a hardened radius of either 6mm or 4mm. The punch has been ground to simultaneously marry both of these rounds when driven down by the cam actioned handle. The material to be rounded is slid from the left or right hand side positively into the stops, to leave an overhang which is sheared through by the punch to leave a clean corner of either 6mm or 4mm radius. It should be noted that material originally cut out of square will result in an unbalanced round being removed. The table support column is mounted on a 5" Ă— 5" steel plate with screw holes for bench fixing, although this will probably be unnecessary for most users. Overall height with handle upright 8" (205mm) and weight 1.2Kg.
Order Code 700-007
SMALL PCB DRILLING MACHINE
Price ES420 Corner Rounder
DM403 - High Speed PCB Drill A 240v AC drill ideal for drilling PCBs with a variable speed control for speeds between 10,000 - 33,000 rpm. It features a sturdy shatter proof nylon housing and a dependable sleeve bearing 125 Watt motor and ball bearing driven shaft. A 1/8th" collet is fitted. Weight 450g.
Economical Drilling System
DM405D Drill Stand A drill stand to fit the Dremel drill. It has a robust arm containing an adjustable aperture in which the drill is held vertically. The arm slides against springs on two pillars fixed rigidly to a base plate of 230 Ă— 150mm. Drill pillars can be switched to offer right or left handed use.
DM410 Dremel Drilling Station
Dremel Drilling Station
A complete drilling station consisting of a DM403 variable speed Dremel drill, a Dremel Drill Stand and three tungsten carbide drill bits. Order Code
26
Price
700-014
DM403 Variable Speed Dremel
700-305
DM405D Dremel Drill Stand
700-307
DM410 Dremel Drilling Station