Steps for Canon Pixma TS3122 Printer Troubleshooting
Brother printers are known for their good printing quality. You can use them as a part of a office setup or at your home. They are compatible with all the devices. But there are instances when Brother printer won’t print due to some error. It can be troublesome if you are trying to print something and it gets stuck. This can hamper your work. Let’s have a look at some of the reasons for why the Brother printer is not making prints. There can be an issue with the wiring, the plugs may not be connected properly or with the wireless printing. The connection between the devices maybe lost. If your printer has a paper jam, it would stop printing. The printer driver might be outdated. If there is not enough ink or toner in the printer. The printer may be set to offline mode because of which it is unable to print. Another reason for why won’t my Brother printer print is if there is not connection between the device or the internet is not working properly.
Steps to setup Canon printer: On the modem, press the WPS button for a few seconds. Your printer will automatically find the network and get connected to it. If the network is password protected. Press the WPS button till the light is stable and enter your password.
Now, let’s see how to configure the settings on the Wi-Fi. Go to settings and then press, “Network settings”. Select ‘Wireless setup Wizard’ after this the printer will start finding networks. Chose your Wi-Fi network name and enter your password. Your printer is now connected to Wi-Fi
Most of our data and documents are on the phone these days. You can also connect your phone to the printer and directly run commands for printing. This is how to connect Canon TS3122 printer to phone. Start your mobile application and tap on the settings icon. Go to printer settings. Select the printer, which is already connected to the Wi-Fi from the list. Tap on your printer name and t will be linked to your device.
If you have connected your devices but still the printer shows some kind of error, you can go through the troubleshooting ways to fix those errors.
Troubleshooting ways to fix errors in printer: Check for any new updates on your software. You can check if the printer is working on any other device and if it is working there. Keep the printer on and cut its power cable. If there are any other cables attached to the printer remove them too. Press and hold the power button for 15-20 seconds. Make sure that your printer is directly connected to the main source and not through any other cables or device. When you reconnect the printer, it should turn on automatically. If not so, switch it back on manually. Download and install the HP Print and Scan doctor software, if you are facing an issue with printer drives.
Follow the steps mentioned about and check the internet connection. All the devices should be connected properly.
Reference Links https://www.joinarticles.com/steps-for-canon-pixmats3122-printer-troubleshooting/ http://www.cross.tv/profile/757512? go=blogs&action=show&id=226426&backpage=1