MODEL
DEFENDER TRALYX TRALYX SLIM TRALYX XL SINTRYX
AGON OPTICAL CLIP SHOCK ABSORBER KIT (INCLUDED) 6 pcs. AC 56 00 33
RYDON
The FR70 RX Optical Insert comes now standard with 3 pairs of proprietary shock absorber stickers; made out of a special polymer they will minimize scratches and vibrations resulting from the insert/ correction lenses against the inner surface of the sun/plano lenses. To be mounted on the far edge of each prescription lens of the insert.
RYDON SLIM FOTONYK
STRATOFLY
ZYON
GUARDYAN FR 52 00 00
FR 39 00 00
FR 49 00 00
FR 70 00 00
Patented Quick Insert Technology on Adapter
RX OPTICAL INSERT
RX DIRECT CLIPS
RX INSERTS
Rudy Project has created RX inserts that can be snapped in behind the polycarbonate Rudy Project lenses. Thanks to our patented ‘easy-in easy-out’ system, our Clip-ons can be inserted or removed with ease. This is particularly useful when you want to wear your contact lenses or when cleaning. 1. When the template is not available, use the demo (or plano lens) as reference to cut the ophthalmic lenses. 2. The clip must be properly shaped according to the model of the glasses which should be applied before installation. Once set, you can determine fit parameters (PD and H), and deduct final considerations when mounting progressive lenses. 3. Before removing the clip to fit ophthalmic lenses, remember to take your references for the true horizontal axis. 4. The vertex distance is reduced when using an Optical RX insert: this should be taken into consideration before mounting ophthalmic lenses. 5. The winding angle of the RX Optical Insert may change according to the design and geometry of the eyewear on which it is mounted, and it is always much higher than the one found on a regular dress eyewear. This induces an horizontal prismatic deviation which will increase with the power of the lenses. Rudy Project recommends, as a general rule, to apply an horizontal shift of the lens in this way: +1.00 mm per eye in case of negative correction / -1.00 mm per eye in case of positive correction 6. If the value of the spherical lens is more than +/- 3:00 diopters and given the high wrap of the Rudy Project frames, it is necessary to make the due considerations on the required horizontal prismatic compensation and to the reduced vertex distance. 7. Before mounting ophthalmic lenses, it is always recommended to check the centering of the lenses on the clip once housed in the frame; do not mount any prescription on a clip without frame. 8. For the best result when mounting lenses on the clip, Rudy Project suggests to refer to the regular dress eyewear of the patient: in this way the adaptation to the new device will be faster and easier. 9. Rudy Project recommends the fitting of ophthalmic lenses with spherical geometry. For best results, consider to mount lenses with optical design specific for wraparound frames. 10. The RX Insert is not compatible with ImpactX® Polarized lenses.
QUICK OPTICAL GUIDE OPTICAL DOCK
RX / OPTICAL
OPTICAL INSERTS
FR 52 00 00 A 57 / B 37 DBL 13 BASE 6
FR 39 00 00
ONLY FOR TRALYX XL INSET WITH IMPACTRX
A 50 / B 33 DBL 13 BASE 5
FR 49 00 00 A 49 / B 34 DBL 22 BASE 5
FR 70 00 00
FR 29 00 02
A 45 / B 33 DBL 20 BASE 6
A 59 / B 37 DBL 18 BASE 8
FR 70 00 00
FR 80 00 02 A
FR 79 OD --
A 45 / B 33 DBL 20 BASE 6
A 61 / B 38 DBL 20 BASE 8
A 54 / B 34 DBL 20 BASE 4
FR 70 00 00
FP 54 OD --
A 45 / B 33 DBL 20 BASE 6
A 54 / B 34 DBL 20 BASE 4
FR 70 00 00
FR 45 OD --
A 45 / B 33 DBL 20 BASE 6
A 54 / B 35 DBL 20 BASE 4
FR 70 00 00
FR 23 00 02
FR 45 OD --
A 45 / B 33 DBL 20 BASE 6
A 58 / B 40 DBL 18 BASE 8
A 54 / B 35 DBL 20 BASE 4
FR 70 00 00 A 45 / B 33 DBL 20 BASE 6
FR 16 00 00 A 50 / B 29 DBL 24 BASE 6
FR 16 00 00 SPINAIR 56
SPINAIR 57
SPINAIR 58
124
125