Rietberg Behälter Produktkatalog 2017 (EN) by seitenweise online/offline

PRODUCT CATALOGUE 2017 RIETBERG CONTAINERS

Collection . Storage . Transportation

SEPPELER â&#x20AC;&#x201C; WE MAKE IT WORK.

RIETBERG CONTAINERS 2017

STATIONARY FUEL SYSTEMS

›› PAGE

Diesel on-site filling station

›› PAGE

Petrol on-site filling station

K AP ECO

›› PAGE

K AP GIRO

›› PAGE

MOBILE FUEL SYSTEMS

›› PAGE

Double-walled mobile diesel fuel systems

QUADRO-CV

›› PAGE

QUADRO-C

›› PAGE

QUADRO-C blue

›› PAGE

TRAILER

›› PAGE

KC-K

›› PAGE

KC-S

›› PAGE

KC 2900

›› PAGE

KC 995

›› PAGE

QUADRO-C-E

›› PAGE

Single-walled mobile diesel fuel systems

CONT Y-ECO

›› PAGE

CONT Y-B

Double-walled mobile petrol fuel systems

QUADRO-CV 330

›› PAGE

Single-walled mobile petrol fuel systems

CONT Y-B 330

›› PAGE

CONT Y 250

SUPPLY OF POWER UNITS AND HEATERS

QUADRO-AG

›› PAGE

QUADRO-TA 700

›› PAGE

KC-AG 5500

›› PAGE

QUADRO-C OEL

RIETBERG CONTAINERS 2017

STORAGE CONTAINERS

›› PAGE

LT-se

Storage tanks

›› PAGE

100

LT-elh

›› PAGE

102

LT-elh

104

›› PAGE

Storage tanks

Multi-tanks

›› PAGE

COLLECTION CONTAINERS

›› PAGE

Multi-collectors

Waste oil collectors

AS-T-se

›› PAGE

113

AS-TP-se

›› PAGE

114

›› PAGE

116

MS-TP-elh

›› PAGE

118

124

GD-D-elh

›› PAGE

126

›› PAGE

126

MOBILUS ECO blue ›› PAGE

142

›› PAGE

134

›› PAGE

153

Hazardous substance depots

Hazardous substance collectors

MS-T-se

GS-TP-elh

120

GS-TP-elh

›› PAGE

122

›› PAGE

120

›› PAGE

136

GD-TP-elh

FUEL EXTRACTION AND FUELLING SYSTEMS

›› PAGE

AUS 32 (ADBLUE®) DELIVERY EQUIPMENT

135

MOBILUS 100

MOBILUS blue

›› PAGE

140

CUSTOMER-SPECIFIC SOLUTIONS

KC 995 TDE

New product Motor, gearbox and lubrication oils

›› PAGE

146

›› PAGE

149

CC 200

›› PAGE

151

Diesel

AUS 32 (AdBlue®)

Stationary containers

Supply

Petrol

Kerosene

Mobile containers

Disposal

K A 7500

›› PAGE

se fluid (fireresistant, flash point > 55°) elh fluid (flammable, extremely flammable, highly flammable, flash point < 55°)

MOBILUS por table

›› PAGE

RIETBERG CONTAINERS 2017

TABLE OF CONTENTS

STATIONARY FUEL SYSTEMS Diesel on-site filling stations › KA › KAP ECO › KAP GIRO

PAGE

Petrol fuel system › KA

PAGE

MOBILE FUEL SYSTEMS Double-walled diesel mobile fuel systems › QUADRO-CV › QUADRO-C › QUADRO-C blue › Rietberg trailer › KC-K › KC-S › KC 2900 › KC 995 Single-walled diesel mobile fuel systems › CONTY-ECO › CONTY-B › QUADRO-C-E Double-walled petrol mobile fuel systems › QUADRO-CV 330 Single-walled petrol mobile fuel systems › CONTY-B 330 › CONTY 250

14 16 22 23

FUEL CONTAINER FOR UNITS AND HEATERS › QUADRO-AG › QUADRO-C Kaskade › QUADRO-TA 700 › KC-AG 5500 › QUADRO-C oel

PAGE

34 36 38 42 45 46 47 48 49 54

54 56 58 PAGE

61 PAGE

64 66

POWER

76 81 82 84 86

RIETBERG CONTAINERS 2017

STORAGE CONTAINERS FOR SUPPLY AND DISPOSAL 96 96 PAGE 100 100 102 PAGE

Multi-tank › MT Storage tank › LT-se › LT-elh

PAGE

135

135 PAGE

136

AUS 32 (ADBLUE®) DELIVERY EQUIPMENT Fuelling systems › Mobilus Blue › Mobilus ECO Blue › KS Blue

PAGE

FUEL EXTRACTION AND FUELLING EQUIPMENT Refilling equipment › Mobilus portable Extraction and fuelling equipment › Mobilus 100

PAGE

113 113 114 116 116 118 120 120 122 124 124 126

PAGE

140 140 142 143

CUSTOMER-SPECIFIC SOLUTIONS Special models

PAGE

146

Keyword index

PAGE

154

PAGE

Waste oil collector › AS-T-se › AS-Tp-se Multi-collector › MS-T-se › MS-TP-elh Hazardous substance collector › GS-TP-elh › GS-TP-elh Hazardous substance depot › GD-TP-elh › GD-D-elh

COLLECTION CONTAINERS FOR DISPOSAL

PREFACE

RIETBERG CONTAINERS 2017

PREFACE

RIETBERG CONTAINERS. CONTINUITY IN THE CHANGE For more than 80 years, Rietbergwerke has been developing and manufacturing innovative solutions relating to containers. Small-scale fuel tank, waste oil depots, double-walled cubic storage containers, mobile fuel systems and fuel extraction equipment are just a few examples of practical products that have set trends. Double-walled containers with vacuum leakage monitoring stand for high standards in quality and safety. For decades, Rietbergwerke has been a leading manufacturer of containers. Following our motto "Seppeler we make it work", we offer a wide range of services: Product innovation › Quick solutions for new requirements Consulting competence with trained and creative staff › Legal security. According to legal requirements and standards Customer-specific solutions › Tailored to individual requirements Production and inspection of IBC › Certified and approved for production and inspection/testing of intermediate bulk containers (IBC) Specialised company according to the German Federal Water Act › Certified for carrying out work on systems to handle substances hazardous to water Competence and certification › Development and production "Made in Germany" › Certified manufacturer of structural steel components according to DIN EN 1090-2 to EXC3 › Recognised welding specialist according to 18800-7:2008-11 › Certified company for production of pressure vessels and components according to AD 2000 datasheet HP0 › Quality assurance of production and services using a certified management system according to DIN EN ISO 9001:2008 › Energy management system according to DIN EN ISO 50001:2011 › Environmental management system according to DIN EN ISO 14001:2009 › Neutral RAL quality supervision Durability guarantee › 10 year guarantee on hot-dip galvanised containers in appropriate applications according to intended use

DIVISION MANAGER Dipl.-Ing. Matthias Limberg Registered manager

CONTACTS

RIETBERG CONTAINERS 2017

RIETBERGWERKE CONTACTS TECHNOLOGY AND QUALITY ASSURANCE

QUALIT Y ASSURANCE Dipl.-Ing./IWE Reinhard Hübner +49 5244 983-262 reinhard.huebner@seppeler.de

CONSTRUCTION Dipl.-Ing./IWE Adalbert Burmeister +49 5244 983-257 adalbert.burmeister@seppeler.de

PRODUCTION MANAGER Thorsten Martinschledde +49 5244 983-447 thorsten.martinschledde@seppeler.de

CONSTRUCTION State certified technician Eugen Illarionow +49 5244 983-255 eugen.illarionow@seppeler.de

CONSTRUCTION Simone Bartels +49 5244 983-256 simone.bartels@seppeler.de

CONSTRUCTION State certified business technician Manuel Albrecht +49 5244 983-241 manuel.albrecht@seppeler.de

PURCHASE

PURCHASE Heinz-Jürgen Bergmeier +49 5244 983-242 · Fax +49 5244 983-444 heinz-juergen.bergmeier@seppeler.de

RIETBERG CONTAINERS 2017

CONTACTS

SALES

BUSINESS DEVELOPMENT NORTH EUROPE/GERMANY Dipl.-Ing. (FH) Guido Rรถttgers +49 5244 983-250 guido.roettgers@seppeler.de

AREA SALES MANAGER SOUTH/WEST EUROPE/GERMANY Bernhard Niedermeyer +49 5244 983-264 bernhard.niedermeyer@seppeler.de

AREA SALES MANAGER NORTH/WEST GERMANY Robert Bee +49 5244 983-346 robert.bee@seppeler.de

AREA SALES MANAGER SOUTH GERMANY State certified business economist Roman Nerenberg +49 5244 983-252 roman.nerenberg@seppeler.de

MARKETING & SALES Bachelor of Economics Liliana Junghรถlter +49 5244 983-244 liliana.junghoelter@seppeler.de

MARKETING & SALES State certified business economist Helene Hoppe +49 5244 983-261 helene.hoppe@seppeler.de

DEPUT Y DIVISION MANAGER Rainer Tielking +49 5244 983-254 rainer.tielking@seppeler.de

SALES Sevim Basak +49 5244 983-240 sevim.basak@seppeler.de

01 STATIONARY FUEL SYSTEMS

STATIONARY FUEL SYSTEMS

RIETBERG CONTAINERS 2017

ON-SITE FILLING STATIONS Many companies can benefit from the installation of an on-site filling station. It helps to save money and time as these systems enable fuelling at any time without the need for public gas stations. Additionally, price fluctuations may be better taken advantage of by purchasing larger fuel volumes for even more benefits.

Rietberg fuel supply systems are designed according to DIN and are therefore approved as regulated construction products for above-ground storage of fuels and mineral oils like petrol, diesel and fuel oil.

Diesel on-site filling station KA 5000 & KAP GIRO with folding cover

Petrol filling station KA 400

STATIONARY FUEL SYSTEMS

RIETBERG CONTAINERS 2017

Their benefits

Ready to plug in

Vacuum leakage indicator

All required ﬁttings and ordered pieces of equipment are already mounted. The system is immediately ready for operation.

› Permanent closed leakage monitoring system at both walls with approval for outdoor installation › Environmentally friendly, oﬀ-grid, durable

Double-walled

Hot-dip galvanised

› Both walls are made of steel, high durability, long service life 1 › Vacuum-tight welding › No additional costs for a collection tray 2

Hot-dip galvanised on the inside and outside: The components of Rietberg containers are individually hot-dip galvanised on the inside and outside. They receive a zinc coating of at least 55 μm according to DIN EN ISO 1461. As in Germany annual zinc abrasion of approx. 1 μm is taken into account according to DIN EN ISO 14713-1, the products are corrosion-protected for decades. Hot dip galvanisation provides the surface with cathodic self-protection against corrosion in case of minor damage and is extremely abrasion-resistant.

STATIONARY FUEL SYSTEMS FOR DIESEL

RIETBERG CONTAINERS 2017

FUEL STATION FOR INTERNAL USE KA [DIESEL]

3 3 2 2

Their benefits › Manufactured according to DIN 6624/DIN 6616 with German approval for storage of diesel/fuel oil or other fire-resistant fluids, i.e. media with a flash point above 55 °C, and other water-polluting fluids of all water hazard classes › Installation in buildings and outdoors › Double-walled design for installation of several tanks next to each other without any gaps. No storage space for collection of fluids is required › Full steel design for extreme durability and long service life › The containers are hot-dip galvanised on the inside and outside for optimum protection against corrosion. The containers are optionally available raw on the inside and coated on the outside (RAL 7035, light grey) › By default, the containers are equipped with all required ports and fittings › If required, empty containers may also be transported by crane

Technical characteristics › Hot-dip galvanised on the inside and outside or raw inside and coated outside › Double-walled; permanent off-grid vacuum leakage monitoring on both walls 1 › Suction line with pump port › Continuous filling level indicator › Filler line with lockable 2/2½" safety screw fitting › Ventilation line › Fill limit indicator › One 1" and one 2" reserve sleeve each › Dome lid with upward lips at the side for containing spillages 5 › 2 lifting brackets for empty transport, safe crane lifting acc. to BGI 556 1

2 Signal red is the special edition

RIETBERGWERKE GMBH & CO. KG

DIN 6624

STATIONARY FUEL SYSTEMS FOR DIESEL

RIETBERG CONTAINERS 2017

Available models Dimensions (mm) Type / content

KA 1000 KA 1500

1400

1000

1400

Hot-dip galvanised

Coated

Weight (kg)

Approval

Art. no.

Price (€)

Art. no.

Price (€)

350

DIN 6624

83329

2,238.-

83556

2,162.-

2100

1000

1400

380

DIN 6624

83549

2,855.-

83557

2,639.-

2800

1000

1400

460

DIN 6624

83332

3,260.-

83558

2,940.-

KA 2900

2100

1400

1900

660

07-PÜZ 8104581324

77444

4,526.-

77467

4,173.-

KA 3000-100

4050

1000

1400

580

DIN 6624

83550

4,055.-

83559

3,642.-

KA 3000-125

2750

1250

1700

620

DIN 6624

83551

4,055.-

83560

3,642.-

KA 3500

3100

1250

1700

680

DIN 6624

83552

4,254.-

83561

3,847.-

KA 2000

KA 5000-125

KA 5000-140

4350

1250

1700

820

DIN 6624

83334

5,098.-

83562

4,627.-

3660

1400

1900

950

07-PÜZ 8104581324

73249

5,698.-

74485

5,256.-

KA 5000-160

2690

1600

2100

1200

07-PÜZ 8105638697

77991

6,384.-

77998

5,718.-

KA 7500-140

5240

1400

1900

1650

07-PÜZ 8105638697

77989

7,180.-

77996

6,427.-

KA 7500-160 KA 10000-140

4000

1600

2100

1580

07-PÜZ 8105638697

77992

7,582.-

77999

6,791.-

6800

1400

1900

1920

07-PÜZ 8105638697

77990

8,443.-

77997

7,559.-

KA 10000-160

5350

1600

2100

1900

07-PÜZ 8105638697

77993

8,903.-

78000

7,965.-

11,113.-

78001

9,943.-

KA 13000

7000

1600

2100

2480

07-PÜZ 8105638697

77994

KA 16000

8600

1600

2100

2940

07-PÜZ 8105638697

77995 12,992.-

78002 11,570.-

Accessories Type

Swing door cabinet Ladder Panel

Description 4

Dimensions (L x W x H): 650 x 650 x 800 mm, weight: 35 kg 6 Lateral access ladder with extra large top step for containers with Ø 1400 mm and 1600 mm For discharge equipment of lying diesel fuel systems. Tank Ø 1000 – 1400 mm For discharge equipment of lying diesel fuel systems including piping with siphon protection valve between container and discharge equipment

Cleaning dome III Without suction line

For containers for ﬁre-resistant ﬂuids, plain cover, screw-connected to the dome Price reduction

1) Height without swing door cabinet

Art. no.

Price (€)

81990 98012

424.457.-

21717

290.-

Tank Ø 1000 – 1250 mm

33222

881.-

Tank Ø 1400 mm

89385

941.-

Tank Ø 1600 mm Ø 500 mm

73641 88942

941.469.-

86282

36.-

STATIONARY FUEL SYSTEMS FOR DIESEL

RIETBERG CONTAINERS 2017

VANE PUMPS

Dry, self-priming, good price-performance ratio, bypass valve for protection against pump damage Scope of delivery: Motor pump, 4.0 m discharge hose, angular swivel joint, automatic discharge nozzle with axial swivel joint, connection cable with plug, adapter for mounting on Rietberg containers, mounted on ordered Rietberg container

Rated pumping capacity1) (l/min)

Type

R50 230 R50 230 TP

Voltage (V)

Hose

Price (€)

NW19 NW19

96349 96350

443.860.-

NW19

96351

1,020.-

NW25

96353

622.-

R80 230 R120 230 R200 230

AC 230 AC 230

– –

NW25

96478

956.-

140

NW25

97981

1,885.-

200

AC 230

–

NW32

97441

2,759.-

NW19

39785

169.-

Art. no.

Price (€)

120

Biodiesel

AC 230 AC 230

– Electric pump combined with manual pump Electric pump combined with manual pump and ﬂow meter –

Art. no.

50 45 (0.35 l/stroke) 40 (0.35 l/stroke) 80

R50 230 TPZ

AC 230 AC 230

Special features

4.0 m hose kit, for discharge of biodiesel

FLOW METERS, NOT CALIBRATABLE, NOT FOR CUSTODY TRANSFER Flow rate (l/min) Type / content

Description

Min.

Max.

PZ300

Mechanical roller ﬂow meter

120

96359

147.-

EZ24

2Digital turbine ﬂow meter

K700

Mechanical oval wheel ﬂow meter for pump R200 230

7 20

120 220

96479 97799

177.561.-

GEAR PUMP

Dry, self-priming, high durability and long service life, incl. bypass valve for protection against pump damage Scope of delivery: Motor pump, 4.0 m discharge hose, angular swivel joint, automatic discharge nozzle with axial swivel joint, connection cable with plug, adapter for mounting on Rietberg containers, mounted on ordered Rietberg container 3 Rated pumping capacity1) (l/min)

Type

R25/20 W R25/20 WZ

Voltage (V)

AC 230

Special features

– With ﬂow meter

Hose

Art. no.

Price (€)

NW19

96541

1,446.-

NW19

96542

1,643.-

1) The rating speciﬁed by the manufacturer applies to a free outlet and can be reduced by installing components like discharge nozzles, discharge hoses and ﬂow meters

STATIONARY FUEL SYSTEMS FOR DIESEL

RIETBERG CONTAINERS 2017

High-quality and durable version for delivery of lower fuel volumes, independent from power sources. Scope of delivery: Manual pump, 2.5 m discharge hose, safety spout, connection adapter for mounting at Rietberg containers; mounted at ordered Rietberg container 4 Rated pumping capacity1) (l/stroke)

Type 4

TP 3 TP 3 Z300

Special features

Art. no.

Price (€)

NW19

31908

440.-

With ﬂow meter, not calibratable, not for custody transfer NW19

31909

587.-

0.35 0.35

–

Hose

PUMPS WITH FUEL DATA RECORDING 5

Type

R60 ECO Box

Description 5

R80 ECO Box Transponder tag Float switch Cube 70-MC Complete set

User keys

Scope of delivery: Vane pump, self-priming, 230 V AC motor, oval wheel flow meter with LCD display and pulse generator, not calibratable, not for custody transfer, 4.0 discharge hose, automatic discharge nozzle, discharge nozzle bracket with on/off switch, fuel data recording, PC software for analysis, mounted on ordered Rietberg container. For type-specific information, please refer to the table below.

Pumping capacity of max. 55 l/min, DN19 discharge hose; automatic fuel terminal/ fuel data recording for up to 2,000 users; internal memory for max. 10,000 fuelling processes; user identification via transponder technology; including USB interface for data retrieval; German, English, French and Spanish user interface (additional languages can be loaded); all components are integrated in a durable steel housing As R60 Eco Box, however, with a pumping capacity of max. 75 l/min, DN 25 discharge hose For R60/R80 ECO Box. For contact-free user identification For R60/R80 ECO Box. For pump deactivation in case of insufficient diesel Pumping capacity of max. 70 l/min, DN25 discharge hose, automatic fuel terminal/ fuel data recording for up to 50 users; internal memory for max. 255 fuelling processes, user identification and data retrieval via magnetic key, including 1 manager key for system management and 10 user keys, German user interface (other languages optional); all components are integrated in a durable steel housing For the extension of the Cube 70-MC system; for contact-free user identification (set of 10)

Art. no.

Price (€)

96615

2,703.-

96616

3,121.-

96617

17.-

96618 97140

147.2,033.-

41972

121.-

Art. no.

Price (€)

45972

212.-

41832

667.-

FILLING LEVEL INDICATOR / REMOTE INDICATION Type

SmartBox® Mini

SmartBox® 3

Description

Electronic remote filling level indicator, consisting of a mechanical filling level indicator (measuring accuracy +/- 2 %, for installation at the container) and a digital indicator unit; indication optionally in litres or percent and/or filling height in centimetres; 10 m connection cable (max. distance between container and digital indicator unit: 50 m); power supply: 3 type AA batteries. Protection type IP30 Electronic remote filling level indicator including hydrostatic measuring probe (measuring range 250 mbar, measuring accuracy 1 %, for installation at the container) and a digital indicator unit; indication optionally in litres or percent; with optical/acoustic warning; 6 m connection cable (max. distance between container and digital indicator unit: 200 m); supply voltage 230 V, 50 Hz, protection type IP 30

MANUAL PUMPS

STATIONARY FUEL SYSTEMS FOR DIESEL

RIETBERG CONTAINERS 2017

DISCHARGE NOZZLES Flow rate (l/min)

Type

Art. no.

Price (€)

ZVA 19

With axial swivel joint

NW19

44535

139.-

ZVA 19 Slimline

With axial swivel joint

NW19

34435

241.-

120

With axial swivel joint

NW25

39642

265.-

ZVA 25 Slimline

140

With axial swivel joint

NW25

37347

393.-

ZVA 32 Slimline

200

With axial swivel joint

NW32

45244

673.-

ZVA 25

Special features

Outlet

OTHER

Type / content

Description

Discharge hose NW19

Adapter Fuel ﬁlter

Replacement cartridge

Price (€)

39731

50.-

39732

59.-

45232

79.-

45375

97.-

97143

86.-

97144

95.-

97145

114.-

10 Diesel NW19 x 10 m; hose drum with spring return and outlet window; incl. mounting material and pump connection hose Diesel NW19 x 14 m; hose drum with spring return and outlet window; incl. mounting material and pump connection hose Diesel NW25 x 10 m; hose drum with spring return and outlet window; incl. mounting material and pump connection hose. Diesel NW25 x 15 m; hose drum with spring return and outlet window; incl. mounting material and pump connection hose Steel, hot-dip galvanised, for secure mounting of a hose drum or other additional equipment on a KA diesel storage container Adapter for mounting of customer pumps (please define on order) or mounting of pumps on older Rietberg containers (1965 – 1995) Mounted on the pressure side of a pump for protection against contamination and water, filter mesh 30 μm, max. 65 l/min flow; the flow is decreased with increasing saturation; the flow is blocked if the filter cartridge is fully saturated Replacement filter cartridge for the fuel filter

97146 98047

133.539.-

98046

560.-

98045

585.-

98044

798.-

97982

301.-

86349

70.-

73165

132.-

39759

70.-

Integration 1" IT on one side / 1" OT on the other

Hose drum 5 (for panel mounting, art. no. 97982)

Panel

Art. no.

Integration 1" IT on one side / 1" OT on the other

Discharge hose NW25

Hose length (m)

STATIONARY FUEL SYSTEMS FOR DIESEL

FUELLING AREAS In many sectors like agriculture, construction, industry or transport, in-house filling stations offer practical advantages. Trips to public gas stations are no longer required. This saves time and purchasing large quantities saves money. Rietberg fuel filling stations provide a secure area for fuelling of vehicles and storage containers in compliance with all applicable legal regulations. The general technical approval Z-38.5155 enables outdoor and indoor installation. Oil separators are not required. Rietberg fuel filling stations are available in different versions and offers numerous options for setting up the fuel system according to individual requirements. For further information, please refer to the following pages. In combination with an approved storage tank, (e.g. Rietberg storage tanks, KA series, refer to page 16), these products offer a fully approved on-site filling station for diesel. Of course, already existing storage containers can be easily combined with a fuel filling area. The system can be set-up on any level surface with sufficient load-bearing capacity. Construction measures are generally not required. If required, e.g. for repositioning, the system can be easily disassembled.

RIETBERG CONTAINERS 2017

KAP GIRO outdoor installation

KAP ECO indoor installation

STATIONARY FUEL SYSTEMS FOR DIESEL

RIETBERG CONTAINERS 2017

FUEL FILLING STATION KAP ECO [DIESEL] 3 3

2 2

Their benefits › Manufactured on the basis of the general technical approval no. Z-38.5-155 of DIBt Berlin with German approval as secure area for fuelling of vehicles and machinery with diesel fuel and filling of storage containers from a tank vehicle. › Indoor or outdoor installation according to individual requirements › Practically no construction measures are required for installation; a level surface with sufficient load-bearing capacity is sufficient › Easy assembly and disassembly, e.g. for repositioning › Full hot-dip galvanised steel design for extreme durability and long service life › Oil separators are not required and related costs for installation, sewage connection and annual maintenance are prevented Technical characteristics › Modular design › 2 trays with ramps, full corrugated plate design › Depending on the installation, the system can be equipped with a splash protection wall or folding covers › Collection capacity of 150 l per tray › Maximum admissible wheel load 10 t › Fully hot-dip galvanised

GENERAL TECHNICAL APPROVAL, DIBT, BERLIN

Z-38.5-155

Available models Dimensions (mm) Type / content

KAP ECO

Description 1 2 trays incl. ramps

Weight (kg)

Hot-dip galvanised Art. no.

Price (€)

680

72737

3,420.-

–

1060

105

74205

844.-

2500

590/ 2600

170

74920

3,420.-

5200

2600

ACCESSORIES

Splash protection 2 In case of indoor installation for limitation of the 5000 wall eﬀective range incl. discharge hose bracket 3 In case of outdoor installation, for limitation of the 5000 Folding cover access area and for covering the area if no fuelling is carried out; 2 covers (aluminium on hot-dip galvanised steel frame) each with 1 gas pressure spring as lifting aid; hose connection on the outside; 1.5 m NW 19 discharge hose with automatic discharge nozzle on the inside

Cover closed/ open

STATIONARY FUEL SYSTEMS FOR DIESEL

RIETBERG CONTAINERS 2017

FUEL FILLING STATION KAP GIRO [DIESEL] 3

Their benefits › Manufactured on the basis of the general technical approval no. Z-38.5-155 of DIBt Berlin with German approval as secure area for fuelling of vehicles and machinery with diesel fuel and filling of storage containers from a tank vehicle › Indoor or outdoor installation according to individual requirements › The surface is covered with grating. Leaked fuel can be easily detected and contact with the vehicle is prevented › Practically no construction measures are required for installation; a level surface with sufficient load-bearing capacity is sufficient › Easy assembly and disassembly, e.g. for repositioning › Full hot-dip galvanised steel design for extreme durability and long service life › Oil separators are not required and related costs for installation, sewage connection and annual maintenance are prevented

2 1

GENERAL TECHNICAL APPROVAL, DIBT, BERLIN

Z-38.5-155

Technical characteristics › Modular design › 4 steel trays, each covered with 2 heavy-duty gratings › Depending on the installation, the system can be equipped with access ramps and a splash protection wall or folding covers › Collection capacity of 210 l per tray › Maximum admissible wheel load 6.5 t › Maximum admissible vehicle weight 40 t › Fully hot-dip galvanised

Available models Dimensions (mm) Type / content

KAP GIRO

Description 1

4 steel trays with 2 heavy-duty gratings Dimensions with access ramps (accessory art. no. 73134)

Weight (kg)

5000

2500

1100

5550

2780

1242

Hot-dip galvanised Art. no.

Price (€)

74910

4,433.-

73134

877.-

73335

137.-

73318

844.-

75093

3,420.-

73475

1,559.-

ACCESSORIES

Access ramps

Splash protection 2 wall Folding cover 3

Assembly kit including hot-dip galvanised corrugated sheet for the front longitudinal side and the accessible area of the two sides End proﬁles (set of 2) for the rear area of the front faces

142

In case of indoor installation for limitation of the 5000 – 1060 105 eﬀective range incl. discharge hose bracket 5000 2500 590/ In case of outdoor installation, for limitation of the 170 2600 access area and for covering the area if no fuelling is Cover carried out; 2 covers (aluminium on hot-dip closed/ galvanised steel frame) each with 1 gas pressure open spring as lifting aid; hose connection on the outside; 1.5 m NW 19 discharge hose with automatic discharge nozzle on the inside KAP GIRO for tracked Accessory kit consisting of 12 perforated pressure plates made of wood for protection 5 of the gratings as well as wood drive-up ramps on the longitudinal side and the two vehicles front sides

STATIONARY FUEL SYSTEMS FOR DIESEL

RIETBERG CONTAINERS 2017

Accessories for KAP ECO and KAP GIRO fuel ﬁlling stations Type

Description

ASS ﬁttings

Consisting of an insulated TW filling fitting with connection board, a special fill limit indicator for installation into the storage container and a fill limit indicator connector routed into the KAP folding cover; with the ASS fittings, the TW pump is deactivated without delay in case of emergency and only low amounts of fuel leak out and can be securely collected by the KAP 2 Preassembled component with automatically opening/closing cover for assembly in a KAP folding cover 2 For extension of the filler line of a Rietberg storage container to the fuel filling station; assembly kit including a 2" pipe section and 30° pipe bend 1

Filler line bushing Filler line extension

For containers with a diameter of 1000 mm For containers with a diameter of 1250/1400 mm Height guiding for discharge hose

EZ24

Discharge nozzle switch Hose sheathing

Pump panel

Pegs

Heavy-duty anchors

A vertical sliding rail at the KAP folding cover extending the discharge hose for reaching higher vehicle tanks; the horizontal hose length remains the same at 1.5 m A vertical sliding rail at the KAP splash protection wall extending the discharge hose for reaching higher vehicle tanks; the horizontal hose length remains the same at 1.5 m Digital turbine ﬂow meter, not calibratable, not for custody transfer, for direct mounting at the discharge nozzle Discharge nozzle bracket with integrated on/oﬀ switch for the dispensing pump; connection on-site The diesel hose between dispensing pump on the storage container and the hose connection at the KAP folding cover is guided in an additional protective PU hose. In case of leakage, the leaking diesel is collected by the protective hose and safely directed into a tray of the KAP. For mounting of a dispensing pump directly on the KAP splash protection wall; connection between pump and storage container on-site Steel, hot-dip galvanised, 500 mm long, 12 mm diameter, for KAP attachment on compacted gravel (only KAP GIRO) or paved surfaces; set of 10 M 10, for KAP attachment on concrete or asphalt surfaces; set of 10

Art. no.

Price (€)

73132

746.-

74007

232.-

73145

59.-

73146

59.-

73399

261.-

77398

261.-

96479

177.-

79591

322.-

73821

651.-

74637

148.-

73671

135.-

41281

42.-

RIETBERG CONTAINERS 2017

STATIONARY FUEL SYSTEMS FOR DIESEL

Installation examples for fuel filling stations

0,6 x h 0,6 x h

KAP ECO with splash protection wall and panel-mounted dispensing pump set up under an all-open roof. The roof overhang depends on the height of the roof.

Indoor installation of KAP GIRO with splash protection wall and panel-mounted dispensing pump. Due to the restricted room depth, the storage container was positioned next to the KAP.

Outdoor installation of KAP GIRO with folding covers

Outdoor installation of KAP ECO with folding covers

Indoor installation of KAP GIRO with splash protection wall The trays are installed flush with the floor.

Outdoor installation of KAP GIRO for tracked vehicles.

STATIONARY FUEL SYSTEMS FOR DIESEL

RIETBERG CONTAINERS 2017

REQUIREMENTS FOR DIESEL ON-SITE FILLING STATIONS ACCORDING TO TRWS 781 (GERMANY) Meaning and components On-site filling stations are not accessible to the public and are intended for fuelling of company vehicles and equipment like agricultural machinery with low storage volume and annual throughput. They are only operated by the operator or personnel instructed by the operator. The definition of "low consumption" is to be taken from the applicable national and state regulations (North RhineWestphalia in Germany, max. capacity 10 m³). On-site filling stations consist of an above-ground storage container, a discharge unit and a filling area – e.g., the Rietberg fuel filling station for indoor and outdoor installation.

Components STORAGE CONTAINERS

FILLING STATION

2.5 m

min. 1 m

Size of the filling station: › For discharge, the size of the filling station is defined by the effective range. This is calculated from the max. hose length including discharge nozzle plus 1 m. › Effective ranges can be reduced by splash protection walls. › A splash protection wall with a minimum height of 1 m and sufficient width is required. › The effective range for filling storage tanks covers the horizontal hose guide line between the connections at the tanker and the connection fitting of the storage container plus 2.5 m in all directions. Retention capacity: › The retention capacity for discharge units is calculated from the fuel volume that can be discharged at maximum flow within 3 minutes. For example, if a fuel pump has a rated pumping capacity of 50 litres/minute, a retention capacity of 150 litres is required. › For filling of the storage container, the retention capacity is defined by the fuel volume that may be discharged at maximum flow within the time until automatic activation of safety equipment. If a filling hose protection mechanism (ASS) is applied, a retention capacity of 100 litres is required. However, if equipment with attention button and emergency off switch (ANA) is applied, a retention capacity of 900 litres is required.

* For fuel systems with up to 1,000 litres, simpliﬁed conditions apply!

› Regulated construction products, e.g. container according to DIN, containers with compliance certificate or general technical approval › Approval for outdoor installation › Double-walled or with collection tray › Collision buffer › Overfill protection, e.g. fill limit indicator* › Filling with fixed connection*

DISCHARGE UNIT

› Automatic discharge nozzle › Emergency oﬀ switch › Siphon protection valve

RIETBERG CONTAINERS 2017

STATIONARY FUEL SYSTEMS FOR DIESEL

2.5 m

min. 1 m

Hose length range – 1.5 m

Obligations of the operator (example of North Rhine-Westphalia in Germany) › Reporting requirement for systems with a capacity of 1,000 up to 5,000 litres › Building application for systems with a capacity of more than 5,000 litres (1,000 litres in some German states) › Equipment: Fire extinguisher, oil binding agent › Posting of the operating instructions › Inspection prior to commissioning › Exception: Installation by qualiﬁed company Please note that the requirements may vary between diﬀerent states!

Eﬀective range – 2.5 m

Discharge hose starting point

STATIONARY FUEL SYSTEMS FOR PETROL

RIETBERG CONTAINERS 2017

FUEL STATION FOR INTERNAL USE KA [PETROL] Their benefits › Manufactured according to DIN 6623, with German approval for storage of petrol and other flammable fluids of all types as well as other water-polluting fluids of all water hazard classes up to a density of 1.9 kg/l › Installation in buildings and outdoors › Double-walled so that no storage space for collection is required › Full steel design for extreme durability and long service life › The containers are hot-dip galvanised on the inside and outside for optimum corrosion protection. Optionally, the containers are available raw on the inside and coated on the outside (RAL 7035, light grey) › By default, the containers are equipped with all required ports and fittings › If required, empty containers may also be transported by crane › The containers are explosion blast proof and thus withstand even explosions on the inside and may therefore be operated without flame arresters; however, deviating regulations apply for models for bioethanol.

3 2

7 8

Technical characteristics › Hot-dip galvanised on the inside and outside or raw inside and coated outside › Double-walled permanent oﬀ-grid vacuum leakage monitoring at both walls 1 › Suction line with pump port 4 › Dipstick 5 › Filler line with lockable 2/2½" safety screw ﬁtting 6 › Ventilation line, ends 4.0 m above ground level › Gas balance line port 7 › Fill limit indicator 8 › 2 lifting brackets for empty transport, safe crane lifting acc. to BGI 556

1 5 6

RIETBERGWERKE GMBH & CO. KG

DIN 6623

STATIONARY FUEL SYSTEMS FOR PETROL

RIETBERG CONTAINERS 2017

Available models Dimensions (mm) Type / content

KA 400 KA 600 KA 995 KA 995-E85 for bioethanol

Hot-dip galvanised

Coated

Weight (kg)

Approval

Art. no.

Price (€)

Art. no.

Price (€)

160

DIN 6623

71108

2,409.-

71109

2,198.-

1000

1150

190

DIN 6623

71110

2,487.-

71111

2,290.-

1250 1250

250 250

DIN 6623 DIN 6623

71112 –

2,778.–

71113 96585

2,583.3,480.-

Art. no.

Price (€)

85971 96589

298.1,650.-

41646

1,252.-

900

Accessories Type

Swing door cabinet

Description 3

Flame arrester Ventilation hood

Dimensions (L x W x H): 520 x 475 x 700 mm, weight: 23 kg Explosion blast proof; for ﬁller line protection; only required for KA 995-E85 for bioethanol Explosion blast proof; for ventilation line protection; only required for KA 995-E85 for bioethanol

VANE PUMPS

Dry, self-priming. Good price-performance ratio. Bypass valve for protection against pump damage. Scope of delivery: Explosion blast proof motor pump, 4.0 m discharge hose, electrically conductive, angular swivel joint, automatic discharge nozzle with axial swivel joint, without connection cable without connector, adapter for mounting on Rietberg containers, mounted on ordered Rietberg container

Rated pumping capacity2) (l/min)

Type 9 R50 ex 2303) Connector for R50 ex 230

Voltage (V)

Special features

Hose

50 AC 230 – NW19 Schuko plug for the use outside of the Ex-zone, including 10 m cable, fully assembled Ex-plug for the use within Ex-zone 1; make: steel, series 8570, including 6 m cable, fully assembled Ex-coupling for the use within Ex-zone 1; make: steel, series 8570, ready for connection on site

Art. no.

Price (€)

97148 99396

810.25.-

99397

221.-

99398

510.-

Art. no.

Price (€)

97149

241.-

FLOW METERS Flow rate (l/min) Type / content

PZ300-ex

Description 10 Mechanical roller ﬂow meter, ex-proof, not calibratable,

Min.

Max.

120

not for custody transfer

1) Height without swing door cabinet 2) The rating specified by the manufacturer applies to a free outlet and can be reduced by installing components like discharge nozzles, discharge hoses and flow meters 3) The pump is suitable for flammable fluids and has a corresponding explosion protection. The offered plugs may only be used in the respective applicable areas. The Ex-zones must be stipulated by the operator (see Industrial Safety Regulations). If, in the area of the power supply point, Ex-zones can occur, explosion protected plugs and coupling systems must be used.

STATIONARY FUEL SYSTEMS FOR PETROL

RIETBERG CONTAINERS 2017

MANUAL PUMPS

High-quality and durable version for delivery of lower fuel volumes, independent from power sources Scope of delivery: Manual pump, 2.5 m discharge hose, safety spout, connection adapter for mounting at Rietberg containers; mounted at ordered Rietberg container

Type

Rated pumping capacity2) (l/stroke)

Special features

0.35

–

TP 3 TP 3 Z300-ex

0.35

Hose

With ﬂow meter

Art. no.

Price (€)

NW16

31908

440.-

NW16

99483

681.-

Petrol pump accessories DISCHARGE NOZZLES Flow rate (l/min)

Type

Art. no.

Price (€)

ZVA 19 Petrol

With axial swivel joint

Special features

NW16

Outlet

50615

241.-

ZVA 19 Bioethanol

With axial swivel joint and breakaway coupling

NW16

42307

494.-

DISCHARGE HOSES & HOSE DRUM NW19 Type / content

Discharge hose

Description

Art. no.

Price (€)

Art. no.

Price (€)

31829

54.-

83679

84.-

21.- 83679-1 539.–

28.–

301.-

98117

301.-

Description

Art. no.

Price (€)

Adapter for mounting customer pumps (please define on order) or for mounting pumps on older Rietberg containers (1965 – 1995) Mounted on the pressure side of a pump for protection against contamination and water, filter mesh 30 μm, max. 65 l/min flow; the flow is decreased with increasing saturation; the flow is blocked when the filter cartridge is fully saturated Replacement filter cartridge for the fuel filter

86349

70.-

73165

132.-

39759

70.-

With fabric lining, electrically conductive, connection threads 1" IT on both sides The ﬁrst metre (includes the screw ﬁttings) Each additional metre

Hose drum

Panel

NW25

Hose drum, ex-proof, 10.0 m NW 19 hose, with spring return and roller outlet window, incl. connection hose to the pump Steel, hot-dip galvanised, for secure mounting of a hose drum or other additional equipment on a KA 400 – 995 petrol storage container

31829-1 98048

98117

PUMP ADAPTERS & FILTERS Type

Adapter Fuel ﬁlter

Replacement cartridge

1) The rating speciﬁed by the manufacturer applies to a free outlet and can be reduced by installing components such as discharge nozzles, discharge hoses and ﬂow meters.

STATIONARY FUEL SYSTEMS FOR PETROL

REQUIREMENTS FOR PETROL ON-SITE FILLING STATIONS ACCORDING TO TRWS 781 (GERMANY) Meaning and components On-site filling stations are not accessible to the public and are intended for fuelling of company vehicles and equipment like agricultural machinery with low storage volume and annual throughput. They are only operated by the operator or personnel instructed by the operator. The definition of "low consumption" is to be taken from the applicable national and state regulations. On-site filling stations consist of an above-ground storage container, a discharge unit and a filling area.

Components FILLING STATION

STORAGE CONTAINERS

Size of the filling area: › For discharge, the size of the filling station is defined by the effective range. This is calculated from the max. hose length including discharge nozzle plus 1 m. › Effective ranges can be reduced by splash protection walls. › A splash protection wall with a minimum height of 1 m and sufficient width is required. › The effective range for filling of storage tanks covers the horizontal hose guide line between the connections at the tanker and the connection fitting of the storage container plus 2.5 m in all directions. Retention capacity: › The retention capacity for discharge units is calculated from the fuel volume that can be discharged at maximum flow within 3 minutes. For example, if a fuel pump has a rated pumping capacity of 50 litres/minute, a retention capacity of 150 litres is required. › For filling of the storage container, the retention capacity is defined by the fuel volume that may be discharged at maximum flow within the time until automatic activation of safety equipment. If a filling hose protection mechanism (ASS) is applied, a retention capacity of 100 litres is required. However, if equipment with attention button and emergency off switch (ANA) is applied, a retention capacity of 900 litres is required.

DISCHARGE UNIT

› Automatic discharge nozzle › Emergency oﬀ switch › Siphon protection valve

Obligations of the operator › Apply for permission › Apply for building approval › Equipment: Fire extinguisher, oil binding agent › Posting of the operating instructions › Inspection prior to commissioning and repeated inspection every 5 years › Preparation of ex-proof certiﬁcate

RIETBERG CONTAINERS 2017

MOBILE FUEL SYSTEMS FOR DIESEL

RIETBERG CONTAINERS 2017

02 MOBILE FUEL SYSTEMS

MOBILE FUEL SYSTEMS FOR DIESEL

RIETBERG CONTAINERS 2017

MOBILE FUEL SYSTEMS

RIETBERG CONTAINERS 2017

MOBILE FUEL SYSTEMS FUELLING EVERYWHERE AND AT ANY TIME! Mobile fuel systems are essentials for the fuelling of machinery and power units. Independent of the location: whether on construction sites, during forestry work, on fields or in stone pits, fuelling of machinery and equipment should be possible quickly and safely on site. Rietberg steel fuel containers offer the best possible levels of safety and flexibility for this purpose and thus contribute to the minimization of standstill times. This saves time and money.

conditions" according to ADR 1.1.3.6. Therefore, a maximum of 1000 litres of diesel or of 333 litres of petrol can be transported without the driver holding an ADR certiﬁcate. For the vehicle, no labelling of the hazardous goods transport is required and no hazardous goods equipment is to be kept on board. For typetested IBC and steel packages, additionally, there is no time limitation for use. Furthermore, Rietberg fuel containers are also approved for the storage of fuel.

All Rietberg fuel containers are type-tested and approved as IBC or packaging for the hazardous goods transport with all transport modes. Thus, they can be transported under "simpliﬁed

A speciﬁc beneﬁt of packaging is that, for such containers, no repeated testing is necessary. Thus, no subsequent costs are incurred.

Diﬀerent options exist for fuelling construction machinery and equipment directly on site. The tanks oﬀered for this purpose are either › made of steel like all Rietberg fuel containers and type tested and have a UN approval as IBC (code: UN 31A...) or packaging (code UN 1A1 or 1A2...), i.e. transport containers for hazardous goods and can therefore be used universally and without any time limits. OR

› they are type-tested and UN approved plastic IBC (code: UN 31H) or combination IBC(steel sheet with internal plastic container, code: UN 31HZ), i.e. transport containers for hazardous goods and can therefore also be used universally but with a time limit of a maximum of 5 years. OR › they are used based on the ADR exceptional regulation 1.1.3.1c, also known as so-called “craftsman regulation”, but are not type-tested and do not comprise any approval and may therefore only be used to a very limited extent.

Rietberg fuel containers with approval as IBC or packaging can be universally utilised and may therefore be used for all operations which might be necessary for mobile fuelling. Neither the supply of multiple construction sites nor the drive to the next

service station to get new fuel are a problem any more. Typetested and approved containers are always secure from a technical and legal aspect and always guarantee “free transit”.

IBC OR PACKAGING

RIETBERG CONTAINERS 2017

MOBILE FUEL SYSTEMS

containers. This only applies to the direct route between the depot and the construction site(s). Any travel to the next service station is prohibited.

The containers corresponding to the so-called “craftsman regulation” may be exclusively used for carrying (with the machine) for direct utilization. Therefore, machine to be reﬁlled must always be “on board” if fuel is to be transported in these types of

CRAFTSMANSHIP CONTAINER

Without the machine which is to be ﬁled, fuel transports in containers in accordance with the so-called “craftsman regulation”, i.e. supply travel to one or several machines on one or diﬀerent

construction sites and also drives to the next service station, are generally inadmissible.

CRAFTSMANSHIP CONTAINER

MOBILE FUELLING IS NOT DIFFICULT IF DONE RIGHT!

Additional legal framework conditions for mobile fuel systems can be - found on the catalogue pages 68 – 71.

MOBILE FUEL SYSTEMS FOR DIESEL

RIETBERG CONTAINERS 2017

FUEL CONTAINERS QUADRO-CV [DIESEL]

Their benefits › Certification for road, railway, inland shipping and maritime transport as well as air freight for an unlimited time › UN approval as hazardous substance packaging and therefore no costs for repeated inspection. › Transport under simplified conditions without ADR certificate and without hazardous substance marking › German general technical approval as storage container. Storage without additional collection tray › Outdoor installation › Application in water protection areas › Stackable 3-high › Full steel design for extreme durability › The storage space can also be accessed after rigging of the container

3 2 2

Technical characteristics › Hot-dip galvanised on the inside and outside or raw inside and coated outside › Double-walled permanent off-grid vacuum leakage monitoring at both walls 1 › Continuous mechanical filling level indicator › Ventilation line with shut-off ball valve 4 › Lockable suction line 5 › Filler neck with safety screw fitting, lockable 6 › Lateral opening for hose lines or cables 7 › Base construction for secure lifting by forklift truck › 4 lifting brackets, safe crane lifting acc. to BGI 556 › Lockable, spring-mounted cover with 3-point locking and safety locking cylinder 8 › Discharge nozzle bracket with lockable return line for drip volumes › Self-priming pump, readily mounted on the container, including hose and ZVA/outlet valve

APPROVAL 1A2W/Y/...14374 GENERAL TECHNICAL APPROVAL, DIBT, BERLIN

Z-38.12-230

Technical data Dimensions (mm) Type / content

Weight (kg)

QUADRO-CV 330

1215

815

760

217

QUADRO-CV 450

1215

815

895

234

Approval

D/BAM 14970/1A2W Z-38.12-230 D/BAM 14970/1A2W Z-38.12-230

MOBILE FUEL SYSTEMS FOR DIESEL

RIETBERG CONTAINERS 2017

Available models

QUADRO-CV 330-TP

Pump

Manual

QUADRO-CV 330-230

AC 230

QUADRO-CV 330-12

DC 12

QUADRO-CV 330-24 QUADRO-CV 330-12/24

DC 24 DC 12/24

QUADRO-CV 450-TP

Manual

QUADRO-CV 450-230

AC 230

QUADRO-CV 450-12

DC 12

QUADRO-CV 450-24 QUADRO-CV 450-12/24

DC 24 DC 12/24

0.35 l/ stroke 45

Hot-dip galvanised Hose (m)

Discharge nozzle

2.5 AV 20

Coated

Special features

Art. no.

Price (€)

Art. no.

Price (€)

–

99264

2,329.-

99375

2,329.-

4.0 ZVA

–

99261

2,332.-

99376

2,332.-

4.0 ZVA

–

99258

2,312.-

99377

2,312.-

45 35/45

4.0 ZVA 4.0 ZVA

99259 99260

2,312.2,392.-

99378 99379

2,312.2,392.-

99272

2,442.-

99380

2,442.-

– Can be operated with 12 V as well as 24 V direct current

0.35 l/ stroke 45

2.5 AV 20

–

4.0 ZVA

–

99269

2,445.-

99381

2,445.-

4.0 ZVA

–

99266

2,425.-

99382

2,425.-

45 35/45

4.0 ZVA 4.0 ZVA

99267 99268

2,425.2,505.-

99383 99384

2,425.2,505.-

Art. no.

Price (€)

– Can be operated with 12 V as well as 24 V direct current

Flow meters Flow rate (l/min) Type / content

PZ300 EZ24

Description

Mechanical roller ﬂow meter Digital turbine ﬂow meter, not calibratable, not for custody transfer

Min.

Max.

120

96359

147.-

120

96479

177.-

Type

Nominal carrying capacity1) (l/min)

MOBILE FUEL SYSTEMS FOR DIESEL

RIETBERG CONTAINERS 2017

FUEL CONTAINERS QUADRO-C [DIESEL]

Their benefits › UN approval as transport container (IBC) for road (ADR), railway (RID), inland shipping (ADN) and maritime (IMDG code) transport of hazardous substances for an unlimited time › German general technical approval as storage container. Storage without additional collection tray › Outdoor installation › Application in water protection areas › Transport under simpliﬁed conditions without ADR certiﬁcate and without hazardous substance marking up to a capacity of 1000 litres › Stackable 3-high, container for up to 1,000 litres; Stackable 2-high, container for 2000 – 3000 litres › Full steel design for extreme durability

2.1 2 2

Technical characteristics › Hot-dip galvanised on the inside and outside or raw inside and coated outside › Double-walled permanent off-grid vacuum leakage monitoring at both walls 1 › Continuous mechanical filling level indicator › Ventilation line with shut-off ball valve 5 › Lockable suction line 6 › Filler neck with safety screw fitting, lockable 7 › Lateral opening for hose lines or cables 9 › Base construction for secure lifting by forklift truck › 4 lifting brackets, safe crane lifting acc. to BGI 556 › Lockable, spring-mounted cover with 3-point locking and safety locking cylinder 10 › Discharge nozzle bracket with lockable return line for drip volumes (diesel)

8 6

10 1

APPROVAL 31A/Y...13081 GENERAL TECHNICAL APPROVAL, DIBT, BERLIN

Z-38.12-230

2.1 Special edition QUADRO-C 1000 stainless steel

MOBILE FUEL SYSTEMS FOR DIESEL

RIETBERG CONTAINERS 2017

Available models STANDARD

QUADRO-C 700

1215

815

1160

Weight (kg)

Hot-dip galvanised Approval

270

D/BAM/13080/31A Z-38.12-230 QUADRO-C 1000 1215 1000 1290 316 D/BAM/13081/31A 2 Z-38.12-230 Complete package Equipped with motor pump R50 12/24 (DC), with 6 m hose, QUADRO-C 1000 12/24 automatic discharge nozzle, flow meter PZ300 and fill limit indicator QUADRO 2000 2215 815 1620 629 D/BAM/14552/31A 3 Z-38.12-223 QUADRO 2000 without corner fittings 4 QUADRO 3000 2390 1190 1510 838 D/BAM/12180/31A Z-38.12-223

Coated

Art. no.

Price (€)

Art. no.

Price (€)

79568

2,249.-

96406

2,272.-

79171

2,596.-

96407

2,596.-

98244

3,207.-

98145

4,389.-

98174

4,389.-

– 77150

3,917.6,305.-

– 77446

– 6,305.-

Art. no.

Price (€)

74146

73.-

97719

686.-

98043

126.-

45747

417.-

98042

151.-

–

Accessories Type

Description

Fill limit indicator

Complete battery

Battery bracket1)

12 V / 85 Ah battery 1) 13

Charger 14

To prevent overfilling of containers from a tanker with fixed line coupling; standard equipment of QUADRO 2000, 3000 Including battery bracket (art. no. 98043), 12 V / 85 Ah battery (art. no. 45747) and charger (art. no. 98042) Full steel, hot-dip galvanised, for secure mounting of the battery at QUADRO-C, maximum battery dimensions L x W x H = 350 x 180 x 236 mm High power 12 V/85 Ah (20h) gel battery, maintenance-free, watt hours: 950 Wh, cold start current (EN): 450 A, flashback and leakage-proof, internal gas return line, low self-discharge, long service life, temperature-resistant, high vibration resistance and safety against tilting; L x W x H: 330 x 171 x 236 mm, weight: 30 kg Automatic charger including mounting material, micro processor-controlled reverse voltage protection, short-circuit-proof, LED display, insulation: IP 65; voltage: 12 V/5A

12 9 13

14 11 1) Cannot be combined with the integrated hose drum

Dimensions (mm) Type / content

MOBILE FUEL SYSTEMS FOR DIESEL

RIETBERG CONTAINERS 2017

Type

Integrated hose drum 1)

Description

Art. no.

Price (â&#x201A;Ź)

97721

617.-

98047

539.-

98046

560.-

98045

585.-

98044

798.-

97995

271.-

79555

400.-

45529

35.-

2 lashing straps, 2-part, length 4 m, long pressure ratchet, belt width 35 mm; max. admissible traction 2000 daN 2 pieces; strength 8 mm, dimensions 1000 x 250 mm

47993

27.-

47994

29.-

Plastic protectors as modular system, mounted on the perimeter of the container

98374

600.-

Diesel NW19 x 8 m; steel hose drum with protective cover and outlet window; automatic spring return, horizontally mounted and ready for operation in the loading space of QUADRO-C 2 Diesel NW19 x 10 m; hose drum with spring return and outlet window; Hose drum (for panel mounting, art. incl. mounting material and pump connection hose no. 97995) Diesel NW19 x 14 m; hose drum with spring return and outlet window; incl. mounting material and pump connection hose Diesel NW25 x 10 m; hose drum with spring return and outlet window; incl. mounting material and pump connection hose. Diesel NW25 x 15 m; hose drum with spring return and outlet window; incl. mounting material and pump connection hose Panel 3 Full steel panel, hot-dip galvanised, for secure mounting of hose drums, pumps and additional equipment; for mounting at QUADRO-C for up to 1,000 litres; screw-connected to the container 4 Folding steel bracket for attachment with forwarder; for QUADRO-C for up to Forwarder bracket 1,000 l Fire extinguisher 2 kg ABC powder acc. to ADR 8.1.4.2 1

Lashing straps Non-slip mats Collision protection

NEW

For additional accessories including pumps, please refer to pages 50 to 53.

1) Cannot be combined with the integrated battery

MOBILE FUEL SYSTEMS FOR DIESEL

RIETBERG CONTAINERS 2017

Special models For optimum response to customer requests, QUADRO-C oﬀers various optional special models: SURFACE MODELS 7

Surface designation

Hot-dip galvanised

Inner wall

Outer wall

6 hot-dip galvanised hot-dip galvanised

Coated

Raw

Coated

Coated stainless steel

stainless steel

Coated

Hot-dip galvanised with hot-dip galvanised hot-dip galvanised 7 additional coating and coated stainless steel stainless steel 8 stainless steel STORAGE BOX

245 – 490 mm

The storage box oﬀers a standard clearance height of 245 mm. The storage box is also available in heights 330, 410 and 490 mm for a surcharge. Openings can be positioned as required. Type

Description

Storage box 330 Inner height 330 mm; for QUADRO-C 700 Inner height 330 mm; for QUADRO-C 1000 Storage box 410 Inner height 410 mm; for QUADRO-C 700 Inner height 410 mm; for QUADRO-C 1000 Storage box 490 Inner height 490 mm; for QUADRO-C 700 Inner height 490 mm; for QUADRO-C 1000

Art. no.

Price (€)

98054

259.-

98057

259.-

98055

429.-

98058

429.-

98056

487.-

98059

487.-

Art. no.

Price (€)

98036

74.-

SLEEVES Type

Additional sleeve

Description

Up to 2''; for installation of additional ﬁttings (max. 6), not for QUADRO-CV 330 and 450

BASE DESIGN

Inclination and double-walled sump tray optionally available for optimum residual discharge. Type

Sump tray

Description

Art. no.

Price (€)

98049

523.-

98050

122.-

98051

149.-

For QUADRO 2000

98052

192.-

For QUADRO 3000

98053

260.-

Double-walled sump tray ø 150 mm

Inner base with For QUADRO-C 700 inclination For QUADRO-C 1000

RIETBERG TRAILER

The Rietberg TRAILER (refer to page 45) can be adjusted to individual requirements and optionally equipped with various accessories. It consists of a hot-dip galvanised steel frame construction. It oﬀers high durability, a long service life and particularly smooth running characteristics. Its dimensions can be adjusted lengthwise to individual requirements.

RIETBERG CONTAINERS 2017

MOBILE FUEL SYSTEMS FOR DIESEL

FUEL CONTAINERS QUADRO-C BLUE [DIESEL & AUS 32 (AdBlue®)]

Their benefits › UN approval as transport container (IBC) for road (ADR), railway (RID), inland shipping (ADN) and maritime (IMDG code) transport of hazardous substances for an unlimited time › German general technical approval as storage container. Storage without additional collection tray › Outdoor installation › Application in water protection areas › Transport under simpliﬁed conditions without ADR certiﬁcate and without hazardous substance marking › Stackable 3-high › :Completely equipped AUS 32 (AdBlue®) tank, protected and safely integrated

Technical characteristics DIESEL CONTAINER QUADRO-C

3 4

APPROVAL 31A/Y...13081 1

› Hot-dip galvanised on the inside and outside or raw inside and coated outside › Double-walled permanent off-grid vacuum leakage monitoring at both walls 1 › Full steel design for extreme durability › Continuous mechanical filling level indicator › Lockable ventilation and suction lines › Filler neck with safety screw fitting, lockable › Base construction for secure lifting by forklift truck › 4 lifting brackets, safe crane lifting acc. to BGI 556 › Lockable, spring-mounted cover with 3-point locking and safety locking cylinder › Diesel dispensing pump, 50 l/min (rating), voltage selectable 12 or 24 V, discharge hose 4 m long with automatic discharge nozzle, connection cable with terminal clamps › Discharge nozzle bracket with lockable return line for drip volumes

GENERAL TECHNICAL APPROVAL, DIBT, BERLIN

AUS 32 (ADBLUE®) TANK

Z-38.12-230

› › › › ›

GERMAN PATENT

DE 10 2012 112 241

PE tank, single-walled 125 litres capacity Filler neck DN 100 Ventilation with pressure discharge Dispensing pump approx. 30 l/min, voltage selectable 12 or 24 V, discharge hose 4 m long with automatic discharge nozzle, connection cable with terminal clamps

AdBlue® is a registered trademark of the German Association of the Automotive Industry (VDA)

MOBILE FUEL SYSTEMS FOR DIESEL

RIETBERG CONTAINERS 2017

Available models STANDARD Dimensions (mm) Type / content

QUADRO-C 700-12V blue

1215

1000

1290

341

1215

1000

1290

341

QUADRO-C 700-24V blue

Hot-dip galvanised

Weight (kg)

Approval

Coated

Art. no.

Price (€)

Art. no.

Price (€)

98130

3,794.-

98129

3,794.-

98149

3,877.-

98148

3,877.-

74146

73.-

D/BAM/13081/31A Z-38.12-230 D/BAM/13081/31A Z-38.12-230

ACCESSORIES

Fill limit indicator

To prevent overfilling of containers from a tanker with fixed line coupling.

Optional accessories for diesel container QUADRO-C Flow rate (l/min) Type / content

EZ24

Description 3

PZ300

Min.

Digital turbine flow meter, not calibratable, not for custody transfer Mechanical roller flow meter

Art. no.

Price (€)

Max.

120

96479

177.-

120

96359

147.-

Art. no.

Price (€)

98137

133.-

Optional accessories for AUS 32 (AdBlue®) tank FLOW METERS Flow rate (l/min) Type / content

EZ24 AdBlue®

Description 4

Min.

Digital turbine flow meter, not calibratable, not for custody transfer, for AUS 32 (AdBlue®)

Max.

100

DISCHARGE NOZZLES & ZVA ACCESSORIES Type / content

ZVA AdBlue® ZVA AdBlue® stainless steel ZVA AdBlue® SB 325

Description

Automatic discharge nozzle, plastic/stainless steel 6 Automatic discharge nozzle, compl. stainless steel 5

With breakaway system

ZVA AdBlue® SB 325 Z 8 With elec. flow meter and breakaway system Outlet tube 1 Outlet tube 2 Magnet adapter

Outlet

Flow rate (l/min)

Art. no.

Price (€)

NW19 NW19

40 40

46672 43968

92.187.-

NW19

46109

192.-

NW19

46110

313.-

46114 46115

21.45.-

46116

16.-

For discharge nozzle type SB For discharge nozzle type SB, with magnet switch and adapter. Opened by the magnet adapter in the integrated AUS 32 (AdBlue®) tank For outlet tube 2. For opening the safety in the outlet tube, e.g. for canister filling 5 7

BREAK-AWAY SYSTEM AdBlue® is a registered trademark of the German Association of the Automotive Industry (VDA)

MOBILE FUEL SYSTEMS FOR DIESEL

RIETBERG CONTAINERS 2017

MOBILE FUEL SYSTEMS FOR DIESEL

RIETBERG CONTAINERS 2017

Technical characteristics › Externally running wheels › Stable, hot-dip galvanised tube profile frame › Floor made of aluminium corrugated sheet as bracket for the container › Wheel cases made of aluminium sheet › Maintenance-free rubber spring axle › Tyres 185 R 14C › Support wheel, automatically foldable › Coupling height, approx. 450 mm OK ball › Light system according to STZVO 12 V › Overrun brake › Fixture for containers from 300 to 1000 litres › Supporting legs › Approval up to 100 km/h

The fuel container series fitting to the TRAILER can be found from page 36 onwards

Available models Loading platform (mm) Type / content

Rietberg TRAILER-1 Rietberg TRAILER-2

Admissible total weight (kg)

Description

1800

1200

1500

1-axle

2500

1200

2000

2-axle

2500

1200

3500

2-axle with tarpaulin

Rietberg TRAILER-2PL Container assembly

Fixture of a cubic Rietberg tank on the TRAILER

Wheel cases 3 accessible Toolbox on towing bar

Wheel cases reinforced with corrugated sheet

Fire extinguisher with 4 bracket

6 kg fire extinguisher with box and bracket

Art. no.

Lockable aluminium box screwed onto V drawbar

Rietberg TRAILER 1-axle with QUADRO-C 330

Rietberg TRAILER 2-axle with QUADRO-C 1000 Fire extinguisher and toolbox

Price (€)

99365 Upon request 99366 Upon request 99367 Upon request 99368 Upon request 99369 Upon request 99370 Upon request 99371 Upon request

4 1 2

RIETBERG TRAILER

MOBILE FUEL SYSTEMS FOR DIESEL

RIETBERG CONTAINERS 2017

FUEL CONTAINERS KC-K [DIESEL]

Their benefits › UN approval as transport container (IBC) for road (ADR), railway (RID), inland shipping (ADN) and maritime (IMDG code) transport of hazardous substances for an unlimited time › German general technical approval as storage container. Storage without additional collection tray › Outdoor installation › Application in water protection areas › Full steel design for extreme durability › Transport under simplified conditions without ADR certificate and without hazardous substance marking › Central and safe arrangement of ports and fittings in a liquid-proof storage box welded to the container including lockable folding cover

2 2

Technical characteristics › Hot-dip galvanised on the inside and outside or raw inside and coated outside › Double-walled permanent off-grid vacuum leakage monitoring at both walls 1 › Explosion blast proof › Continuous mechanical filling level indicator › Lockable ventilation and suction lines › Filler neck with safety screw fitting, lockable › Base construction for secure lifting by forklift truck › 2 lifting brackets, safe crane lifting acc. to BGI 556 3 KC 1000-K, equipment, R50 230 pump, fill limit indicator

APPROVAL

31A/Y...5639 GENERAL TECHNICAL APPROVAL, DIBT, BERLIN

Z-38.12-51

Available models Dimensions (mm) Type / content

Hot-dip galvanised

Weight (kg)

Approval

Art. no.

Price (€)

KC 500-K

1300

770

1400

225

D/BAM/0489/31A

81780

2,187.-

KC 1000-K

1440

1020

1700

310

D/BAM/5639/31A \\ Z-38.12-51

84710

2,562.-

Accessories Type

Art. no.

Price (€)

Fill limit indicator

To prevent overﬁlling of containers from a tanker with ﬁxed line coupling

Description

97157

73.-

Forwarder bracket

Folding steel bracket over the storage box for attachment of the fuel container with forwarder

84636

257.-

For additional accessories including pumps, please refer to page 50.

MOBILE FUEL SYSTEMS FOR DIESEL

RIETBERG CONTAINERS 2017

FUEL CONTAINERS KC-S

Their benefits › UN approval as transport container (IBC) for road (ADR), railway (RID), inland shipping (ADN) and maritime (IMDG code) transport of hazardous substances for an unlimited time › German general technical approval as storage container. Storage without additional collection tray › Outdoor installation › Application in water protection areas › Full steel design for extreme durability › Transport under simplified conditions without ADR certificate and without hazardous substance marking › Central arrangement of ports and fittings within a protection ring, on which a lockable swing door cabinet 3 (L500 x W455 x H722 mm; weight: 23 kg) is mounted

2 2

Technical characteristics › Hot-dip galvanised on the inside and outside or raw inside and coated outside › Double-walled permanent off-grid vacuum leakage monitoring at both walls 1 › Explosion blast proof › Continuous mechanical filling level indicator › Lockable ventilation and suction lines › Filler neck with safety screw fitting, lockable › Base construction for secure lifting by forklift truck › Central lifting bracket, safe crane lifting acc. to BGI 556 KC 1000-S without swing door cabinet

APPROVAL

31A/Y...5639 GENERAL TECHNICAL APPROVAL, DIBT, BERLIN

Z-38.12-51

Available models Dimensions (mm) Type / content

KC 1000-S Fortfall swing door cabinet

Hot-dip galvanised

Weight (kg)

Approval

Art. no.

1300

770

1610

248

D/BAM/0489/31A

81778 + 85971

2,168.-

1440

1020

1920

333

D/BAM/5639/31A \\ Z-38.12-51

84700 + 85971

2,442.-

KC 500-S

Price reduction

–

Price (€)

298.-

Accessories Type

Fill limit indicator

Description

To prevent overﬁlling of containers from a tanker with ﬁxed line coupling

1) Height including swing door cabinet

Additional accessories, e.g. pumps, can be found on pages 50 to 53

Art. no.

Price (€)

97157

73.-

[DIESEL]

MOBILE FUEL SYSTEMS FOR DIESEL

RIETBERG CONTAINERS 2017

FUEL CONTAINERS KC 2900 [DIESEL]

Their benefits › UN approval as transport container (IBC) for road (ADR), railway (RID), inland shipping (ADN) and maritime (IMDG code) transport of hazardous substances for an unlimited time › Outdoor installation › Application in water protection areas › Full steel design for extreme durability › Transport under simplified conditions without ADR certificate if the container is filled with no more than 1,000 litres of diesel › Central and safe arrangement of ports and fittings in a liquid-proof storage box welded to the container including lockable folding cover 2

Technical characteristics › Hot-dip galvanised on the inside and outside › Double-walled permanent off-grid vacuum leakage monitoring at both walls 1 › Continuous mechanical filling level indicator › Lockable ventilation and suction lines › Fill limit indicator › Filler neck with safety screw fitting, lockable › Base construction for secure lifting by forklift truck › Lateral access ladder with extra large top step › Central lifting bracket, safe crane lifting acc. to BGI 556 2 KC 2900, equipment: R50 230 pump, flow meter, fill limit indicator

APPROVAL

31A/Y...0441

Available models Dimensions (mm) Type / content

KC 2900

2100

1400

1900

Weight (kg)

880

Additional accessories, e.g. pumps, can be found on pages 50 to 53

Hot-dip galvanised Approval

Art. no.

Price (€)

D/BAM/0441/31A

82585

5,914.-

MOBILE FUEL SYSTEMS FOR DIESEL

RIETBERG CONTAINERS 2017

FUEL CONTAINERS KC 995

Their benefits › UN approval as transport container (IBC) for road (ADR), railway (RID), inland shipping (ADN) and maritime (IMDG code) transport of hazardous substances for an unlimited time › Storage containers nationally approved according to DIN 6623 › Storage without additional collection tray › Outdoor installation › Application in water protection areas › Full steel design for extreme durability › Transport under simplified conditions without ADR certificate and without hazardous substance marking › Central arrangement of ports and fittings within a protection ring, on which a lockable swing door cabinet 3 (dimensions L500 x W455 x H722 mm; weight: 23 kg) is mounted

Technical characteristics › Hot-dip galvanised on the inside and outside › Double-walled permanent off-grid vacuum leakage monitoring at both walls 1 › Explosion blast proof › Dipstick › Lockable ventilation and suction lines › Filler neck with safety screw fitting, lockable › Base construction for secure lifting by forklift truck › Lifting brackets, safe crane lifting acc. to BGI 556 › Rollover bar for protection of fittings

2 KC 995 without cabinet

KC 995, equipment: R50 230 pump, ﬂow meter, cabinet, ﬁll limit indicator

APPROVAL

31A/Y...0249 RIETBERGWERKE GMBH & CO. KG

DIN 6623

Available models Dimensions (mm) Type / content

KC 995

2 3

Fortfall cabinet

1270

2122

Hot-dip galvanised

Weight (kg)

Approval

365 D/BAM/0249/31A \\ 07-PÜZ8108351733

Price reduction

Art. no.

Price (€)

73350 + 85971

2,697.-

–

298.-

Accessories Type

Fill limit indicator

Description

To prevent overﬁlling of containers from a tanker with ﬁxed line coupling

1) Height including swing door cabinet

Additional accessories, e.g. pumps, can be found on pages 50 to 53

Art. no.

Price (€)

97157

73.-

[DIESEL]

MOBILE FUEL SYSTEMS FOR DIESEL

RIETBERG CONTAINERS 2017

2 5 1

DIES FUEL CONTAINER EQUIPMENT Vane pumps for diesel Dry, self-priming, good price-performance ratio, bypass valve for protection against pump damage Scope of delivery: Motor pump, 4.0 m discharge hose, angular swivel joint, automatic discharge nozzle with axial swivel joint, connection cable with plug and/or battery clips, adapter for mounting on Rietberg containers, mounted on ordered Rietberg container Rated pumping capacity1) (l/min)

Type

R50 12 R50 24

R50 12/24

50 30/45

R50 230 R75 12

50 75

R300 230

Special features

Hose

–

DC 24 – DC 12/24 Can be operated with 12 V as well as with 24 V direct current AC 230 – DC 12 –

Art. no.

Price (€)

NW19

96347

423.-

NW19 NW19

96348 96352

423.503.-

NW19

96349

443.-

NW25

96354

692.-

DC 24

–

NW25

96355

692.-

AC 230

–

NW25

96353

622.-

120

AC 230

–

NW25

96478

956.-

180 140

DC 24 – AC 230 For QUADRO-C 1000

NW32 NW25

97442 97981

2,834.1,885.-

200

AC 230 For QUADRO-C 1000

NW32

97441

2,759.-

300

AC 230 For QUADRO-C up to 1,000 litres and KC 1000-K

NW32

98826

2,759.-

Art. no.

Price (€)

96359

147.-

R120 230 R180 24 R200 230

DC 12

R75 24 R80 230

Voltage (V)

Flow meters, not calibratable, not for custody transfer Flow rate (l/min) Type

PZ300

Description 5 Mechanical roller flow meter

Min.

Max.

120

EZ24

Digital turbine flow meter

120

96479

177.-

K700

Mechanical oval wheel flow meter for pump R200 230

220

97799

561.-

K900

Electronic oval wheel flow meter for R300 230 pump

500

98828

1,413.-

1) The rating specified by the manufacturer applies to a free outlet and can be reduced by installing components like discharge nozzles, discharge hoses and flow meters

MOBILE FUEL SYSTEMS FOR DIESEL

RIETBERG CONTAINERS 2017

Fuel data recording Scope of delivery: Fuel data recording with LCD display and keypad, oval wheel ﬂow meter with pulse generator, not calibratable, not for custody transfer, PC software, mounted at ordered Rietberg container 6

Type

TDE-DC

Transponder tag

Description 6 This fuel data recording system can be operated with 12 V as well as 24 V direct

current and combined with respective dispensing pumps with up to 30 A. The system consists of: Automatic fuel terminal with oval wheel flow meter incl. pulse generator, not calibratable, not for custody transfer, for max. 2,000 users; internal memory for max. 10,000 fuelling processes; integrated transponder reader; user identification and fuel release via coded transponder; automatic recording of the dispensed fuel volume; LCD display, manual input of vehicle or machine data via protected keypad; integrated USB-interface protected against unauthorized access for data retrieval; 6.0 m connection cable, incl. terminal clamps; 10 transponders, freely codeable, for operation/release of the automatic fuel terminal; PC software for management and analysis of fuel data for up to 200 units For TDE-DC; for contact-free user identification

Art. no.

Price (€)

98287

2,566.-

96617

17.-

MOBILE FUEL SYSTEMS FOR DIESEL

RIETBERG CONTAINERS 2017

Gear pumps for diesel Dry, self-priming, high durability and long service life, incl. bypass valve for protection against pump damage Scope of delivery: Motor pump, 4 m hose kit with kink protection, angular swivel joint, automatic discharge nozzle with axial swivel joint, connection cable with plug and/or battery clips, adapter for mounting at Rietberg containers, mounted at ordered Rietberg container

Rated pumping capacity1) (l/min)

Type

R 25/20 G

36/56

R 25/20 GZ

36/56

R25/20 W

R25/20 WZ

Voltage (V)

Special features

Hose

DC 12/24 Can be operated with 12 V as well as NW19 24 V direct current NW19 DC 12/24 With ﬂow meter, not calibratable, not for custody transfer. Can be operated with 12 V as well as 24 V direct current AC 230 – NW19 AC 230

With ﬂow meter, not calibratable, not for custody transfer

NW19

Art. no.

Price (€)

96539

2,234.-

96540

2,442.-

96541

1,446.-

96542

1,643.-

Diesel manual pumps 1

Rated pumping capacity1) (l/stroke)

Type

TP 3 TP 3 Z300

High-quality and durable version for delivery of lower fuel volumes independently from energy sources Scope of delivery: Manual pump, 2,5 m discharge hose, safety spout, connection adapter for mounting at Rietberg containers, mounted at ordered Rietberg container

1 2

0.35 0.35

Special features

Hose

– With roller ﬂow meter, not calibratable, not for custody transfer

NW19 NW19

Art. no.

Price (€)

31908 31909

440.587.-

Pump accessories DISCHARGE HOSES

Type / content

Discharge hose

Description

Integration 1" IT / 1" OT

Hose length (m)

NW19

NW25

Art. no.

Price (€)

Art. no.

Price (€)

39731

50.-

97143

86.-

39732

59.-

97144

95.-

45232

79.-

97145

114.-

45375

97.-

97146

133.-

1) The rating speciﬁed by the manufacturer applies to a free outlet and can be reduced by installing components like discharge nozzles, discharge hoses and ﬂow meters

MOBILE FUEL SYSTEMS FOR DIESEL

RIETBERG CONTAINERS 2017

DISCHARGE NOZZLES 4

Flow rate (l/min)

Type

ZVA 19

ZVA 19 Slimline

Special features

With axial swivel joint

Outlet

Art. no.

Price (€)

NW19

44535

139.-

With axial swivel joint

NW19

34435

241.-

120

With axial swivel joint

NW25

39642

265.-

140

With axial swivel joint

NW25

37347

393.-

200

With axial swivel joint

NW32

45244

673.-

Art. no.

Price (€)

46319

12.-

46673

15.-

46674

16.-

44338

201.-

Description

Art. no.

Price (€)

Adapter for mounting of customer pumps (please define on order) or mounting of pumps on older Rietberg containers (1965 – 1995) Mounted on the pressure side of a pump for protection against contamination and water, filter mesh 30 μm, max. 65 l/min flow; the flow is decreased with increasing saturation of the filter cartridge; the flow is blocked if the filter cartridge is fully saturated Replacement filter cartridge for the fuel filter

86349

70.-

73165

132.-

39759

70.-

ZVA 25 ZVA 25 Slimline ZVA 32 Slimline

DIRECT CURRENT CONNECTIONS (ONLY IN CONNECTION WITH DIESEL PUMPS) 6

9 7

Type

GSV I

Description

2 high-current plugs (plug=socket) for pump and vehicle mounting; rated for up to 50 A/24 V 7 3-pin plastic socket according to DIN 9680, voltage of 6 – 24 V, max. 25 A, protection class IP54 8 3-pin plastic plug according to DIN 9680, voltage of 6 – 24 V, max. 25 A, protection class IP54 9 2-pin NATO special plug according to VDA 72593A, voltage 12 – 42 V, rating 300 A, short-term 1,000 A, metal housing with hard rubber cable protection, including 5 m cable H07RN-F 2x6 mm2 6

GSV socket GSV plug NATO

PUMP ADAPTERS & FILTERS Type

Adapter Fuel ﬁlter

Replacement cartridge

MOBILE FUEL SYSTEMS FOR DIESEL

RIETBERG CONTAINERS 2017

FUEL CONTAINERS CONTY-ECO [DIESEL]

Their benefits › Dimensions adapted for the transport on a pickup truck › Certification for road, railway, inland shipping and maritime transport as well as air freight for an unlimited time › UN approval as hazardous substance packaging and therefore no costs for repeated inspection. › Transport under simplified conditions without ADR certificate and without hazardous substance marking › Full steel design, therefore extremely durable › Approved as storage container according to the building rules list for flammable and water-polluting fluids › Uncomplicated and secure rigging › The storage space can also be accessed after rigging of the container › Stackable 2-high

1 2

Technical characteristics › Raw on the inside and coated on the outside (container: light grey RAL 7035, cover: sapphire blue RAL 5003) › Single-walled › The fittings and the pump are safely mounted in a protected location, in a storage compartment with lockable cover › Discharge nozzle bracket 3 › Lockable suction line 4 › Lockable ventilation line 5 › Continuous mechanical filling level indicator 6 › Filler neck with safely and tightly lockable fitting 7 › Base construction for secure lifting by forklift truck › 4 lifting brackets for safe crane lifting, according to BGI 556 › Self-priming pump, readily mounted on the container, including hose and ZVA/outlet valve

7 4

APPROVAL 1A1W/Y/...14969 DIBT, BERLIN RULES LIST A

BUILDING

PART 1, 15.19

Technical data Dimensions (mm) W

CONTY-ECO 200

Type / content 1

1080

800

530

Weight kg)

D/BAM14969/1A1W

Approval

CONTY-ECO 440

1080

800

840

110

D/BAM14969/1A1W

MOBILE FUEL SYSTEMS FOR DIESEL

RIETBERG CONTAINERS 2017

Rated pumping capacity1) (l/min)

Type / content

Pump

CONTY-ECO 200-TP

Manual

0.35 l/stroke

CONTY-ECO 200-230

AC 230

CONTY-ECO 200-12

DC 12

CONTY-ECO 200-24 CONTY-ECO 200-12/24

DC 24 DC 12/24

CONTY-ECO 440-TP

Manual

Hose length Discharge (m) nozzle

Special features

Art. no.

Price (€)

2.5 AV 20

–

99204

1,366.-

4.0 ZVA

–

99203

1,306.-

4.0 ZVA

–

45 35/45

4.0 ZVA 4.0 ZVA

0.35 l/stroke

2.5 AV 20

– Can be operated with 12 V and 24 V direct current –

99018

1,286.-

99201 99202

1,286.1,366.-

99208

1,437.-

CONTY-ECO 440-230

AC 230

4.0 ZVA

–

99207

1,377.-

CONTY-ECO 440-12

DC 12

4.0 ZVA

–

99019

1,357.-

CONTY-ECO 440-24 CONTY-ECO 440-12/24

DC 24 DC 12/24

45 35/45

4.0 ZVA 4.0 ZVA

99206 99074

1,357.1,437.-

Art. no.

Price (€)

96479

177.-

– Can be operated with 12 V and 24 V direct current

Accessories Flow rate (l/min) Type

EZ24

Description

Digital turbine ﬂow meter, not calibratable, not for custody transfer

Min.

Max.

120

CONTY-ECO 200 in a pickup truck

1) The rating speciﬁed by the manufacturer applies to a free outlet and can be reduced by installing components such as discharge nozzles, discharge hoses and ﬂow meters.

Available models

MOBILE FUEL SYSTEMS FOR DIESEL

RIETBERG CONTAINERS 2017

FUEL CONTAINERS CONTY-B [DIESEL] 2

Their benefits › Certification for road, railway, inland shipping and maritime transport as well as air freight for an unlimited time › UN approval as hazardous substance packaging and therefore no costs for repeated inspection. › Transport under simplified conditions without ADR certificate and without hazardous substance marking › Full hot-dip galvanised steel design for extreme durability › Approved as storage container according to the building rules list for flammable and water-polluting fluids › Uncomplicated and secure rigging › The storage space can also be accessed after rigging of the container › Stackable 2-high

Technical characteristics › Hot-dip galvanised on the inside and outside › Single-walled › Fittings and pump mounted in a securely lockable storage compartment › Lockable, spring-mounted cover › Discharge nozzle bracket › Lockable suction line 3 › Lockable ventilation line 4 › Continuous mechanical filling level indicator 5 › Filler neck with safely and tightly lockable fitting 6 › Base construction for secure lifting by forklift or pallet truck › 4 lifting brackets for safe crane lifting acc. to BGI 556 › Self-priming pump with adapter, readily mounted on the container, including hose and ZVA/outlet valve

6 7

APPROVAL 1A2W/Y/...14374 DIBT, BERLIN BUILDING RULES LIST A

PART 1, 15.19

Technical data Dimensions (mm) L

CONTY-B 330

Type / content 1

800

950

Weight (kg)

110

D/BAM/14374/1A2W

Approval

CONTY-B 450

800

1150

120

D/BAM/14374/1A2W

MOBILE FUEL SYSTEMS FOR DIESEL

RIETBERG CONTAINERS 2017

Type / content

Pump

Rated pumping capacity1) (l/min)

CONTY-B 330-TP

Manual

0.35 l/stroke

CONTY-B 330-230

AC 230

CONTY-B 330-12

DC 12

CONTY-B 330-24 CONTY-B 330-12/24

DC 24 DC 12/24

CONTY-B 450-TP

Manual

Hose length (m)

Discharge nozzle

Art. no.

Price (€)

2.5 AV 20

–

99257

1,570.-

4.0 ZVA

–

99254

1,510.-

–

99200

1,490.-

99205 99209

1,490.1,570.-

99190

1,610.-

4.0 ZVA

45 35/45

4.0 ZVA 4.0 ZVA

0.35 l/stroke

Special features

2.5 AV 20

– Can be operated with 12 V and 24 V direct current –

CONTY-B 450-230

AC 230

4.0 ZVA

–

99193

1,550.-

CONTY-B 450-12

DC 12

4.0 ZVA

–

98942

1,530.-

CONTY-B 450-24 CONTY-B 450-12/24

DC 24 DC 12/24

45 35/45

4.0 ZVA 4.0 ZVA

99191 99192

1,530.1,610.-

Art. no.

Price (€)

– Can be operated with 12 V and 24 V direct current

Accessories Flow rate (l/min) Type

PZ300 EZ24

Description 7

Mechanical roller ﬂow meter Digital turbine ﬂow meter, not calibratable, not for custody transfer

Min.

Max.

120

96359

147.-

120

96479

177.-

1) The rating speciﬁed by the manufacturer applies to a free outlet and can be reduced by installing components such as discharge nozzles, discharge hoses and ﬂow meters.

Available models

MOBILE FUEL SYSTEMS FOR DIESEL

RIETBERG CONTAINERS 2017

FUEL CONTAINERS QUADRO-C-E [DIESEL]

Their beneﬁts › Temporarily unlimited approval as transport container (IBC) for road (ADR), railway (RID), inland shipping (ADN) and maritime (IMDG code) transport of hazardous substances. › Approved as storage container according to the building rules list for flammable and water-polluting fluids › Transport under simplified conditions without ADR certificate and without hazardous substance marking › Full hot-dip galvanised steel design for extreme durability › Uncomplicated and secure rigging › The storage space can also be accessed after rigging of the container › Compact, space-saving › Stackable 2-high

Technical characteristics › Hot-dip galvanised on the inside and outside or raw inside and coated outside › Single-walled › Lockable suction line 2 › Lockable ventilation line 3 › Discharge nozzle bracket 4 › Continuous mechanical filling level indicator › Filler neck with safely and tightly lockable fitting 5 › Lockable, spring-mounted cover › Base construction for secure lifting by forklift or pallet truck › 4 lifting brackets for safe crane lifting acc. to BGI 556

Equipment: R50 230 pump, fill limit indicator

APPROVAL 31A/Y/...13081 DIBT, BERLIN BUILDING RULES LIST A

PART 1, 15.19

Available models Dimensions (mm) Type / content

QUADRO-C-E 1000

Art. no.

Price (€)

Art. no.

Price (€)

1000

1025

235

D/BAM/13081/31A

99324

1,617.-

99339

1,617.-

1215

1000

1280

263

D/BAM/13081/31A

99323

1,809.-

99338

1,809.-

Weight (kg)

Approval

Coated

1215

QUADRO-C-E 700

Hot-dip galvanised

We oﬀer manual or motor pumps in all performance ranges and designs (refer to accessories on page 50).

MOBILE FUEL SYSTEMS FOR PETROL

RIETBERG CONTAINERS 2017

MOBILE FUEL SYSTEMS FOR PETROL

RIETBERG CONTAINERS 2017

FLASHBACK ARRESTOR According to the German Industrial Safety Regulations, the operator is responsible for the safe operation of a system. The Technical Regulations on Industrial Safety (TRBS) offer suitable measures against the existing safety risks. When applying these measures, the operator can assert the assumption of the compliance with the regulations. With respect to the hazards from explosive atmospheres, TRBS 2152, part 4, chapter 7.1 defines the following: “When opening system components in which a hazardous explosive atmosphere is present and which are not designed with sufficient explosion protection, the necessity of a protection of the system parts against the risk of explosion is to be checked.”

This can be necessary e.g. with aeration and ventilation devices, filling level indicator, filling and discharge lines but also with connection lines to other system components.

The Rietberg QUADRO-CV and CONTY-B 330 fuel containers for petrol are equipped with protective gear, i.e. a filling tube with flame arrester (approval PTB Ex 12-42028) and a deflagration arrester for the ventilation line (approval IBExU08ATEX) for your protection.

MOBILE FUEL SYSTEMS FOR PETROL

RIETBERG CONTAINERS 2017

FUEL CONTAINERS QUADRO-CV 330

Their benefits › Certification for road, railway, inland shipping and maritime transport as well as air freight for an unlimited time › UN approval as hazardous substance packaging and therefore no costs for repeated inspection. › Transport under simplified conditions without ADR certificate and without hazardous substance marking › German general technical approval as storage container. Storage without additional collection tray › Outdoor installation › Application in water protection areas › Stackable 3-high › Full steel design for extreme durability

Technical characteristics › Hot-dip galvanised on the inside and outside or raw inside and coated outside › Double-walled permanent off-grid vacuum leakage monitoring at both walls 1 › Continuous mechanical filling level indicator 2 › Ventilation line with shut-off ball valve 3 and deflagration arrester (IBExU08ATEX2122x) 4 › Lockable suction line 5 › Filling nozzle with lockable safety screw-fitting 6 and flame arrester (PTB Ex 12-42028) › Lateral opening for hose lines or cables › Base construction for secure lifting by forklift truck › 4 lifting brackets, safe crane lifting acc. to BGI 556 › Lockable, spring-mounted cover with 3-point locking and safety locking cylinder › Discharge nozzle bracket › Ground connection › Self-priming pump with adapter, readily mounted on the container, including hose and ZVA/outlet valve

4 1 3 6

5 2

APPROVAL

1A2W/Y/...14374 GENERAL TECHNICAL APPROVAL, DIBT, BERLIN

Z-38.12-230

Technical data Dimensions (mm) Type / content

QUADRO-CV 330

1215

Weight (kg)

815

760

Approval

217

D/BAM 14970/1A2W \\ Z-38.12-230

Available models

Pump

Nominal carrying capacity1) (l/min)

QUADRO-CV 330-TPex

Manual

0.35 l/stroke

2.5 AV 20

ex-proof

99265

2,718.-

99372

2,718.-

QUADRO-CV 330-230ex

AC 230

4.0 ZVA

ex-proof

99263

3,090.-

99373

3,090.-

QUADRO-CV 330-12ex

DC 12

4.0 ZVA

ex-proof

99262

3,070.-

99374

3,070.-

Type

Hot-dip galvanised Hose (m)

Discharge nozzle

Special features

Art. no.

Price (€)

Coated Art. no.

Price (€)

1) The rating speciﬁed by the manufacturer applies to a free outlet and can be reduced by assemblies like discharge nozzles, discharge hoses and ﬂow meters

[PETROL]

MOBILE FUEL SYSTEMS FOR PETROL

RIETBERG CONTAINERS 2017

Accessories Type / content

Fill limit indicator

Description

Art. no.

Price (€)

74146

73.-

Art. no.

Price (€)

99399

25.-

99400

340.-

99401

1,115.-

99396

25.-

99397

221.-

99398

510.-

To prevent overfilling of containers from a tanker with fixed line coupling

PUMP ACCESSORIES

11 2

Type

Connector for R50 ex 12

Connector for R50 ex 230

Description

Battery clips for the use outside of the Ex-zone only, including 10 m cable, fully assembled Ex plug for the use within Ex zone 1, make: steel, series 8571, including 6 m cable, fully assembled Ex-coupling for the use within Ex-zone 1, make: steel, series 8571, ready for connection on site Schuko plug for the use outside of the Ex-zone only, including 10 m cable, fully assembled Ex-plug for the use within Ex-zone 1; make: steel, series 8570, including 6 m cable, fully assembled Ex-coupling for the use within Ex-zone 1; make: steel, series 8570, ready for connection on site

The pumps mentioned on page 61 are suitable for flammable fluids and comprise a corresponding explosion protection. The plugs and battery clips offered may only be used in the respective applicable areas. The Ex-zones must be stipulated by the operator (see Industrial Safety Regulations). If, in the area of the power supply point, Ex-zones can occur, explosion protected plugs and coupling systems must be used.

MOBILE FUEL SYSTEMS FOR PETROL

RIETBERG CONTAINERS 2017

6 7

FLOW METERS, NOT CALIBRATABLE, NOT FOR CUSTODY TRANSFER Flow rate (l/min) Type / content

Description

Min.

PZ300-ex

5 Mechanical roller ﬂow meter, ex-proof

EZ24-ex

6 Digital turbine ﬂow meter, ex-proof

Max.

Art. no.

Price (€)

120

97149

241.-

120

46026

245.-

FILTER Type

Description

Fuel ﬁlter

7 Mounted on the pressure side of a pump for protection against contamination and

Replacement cartridge

water, filter mesh 30 μm, max. 65 l/min flow; the flow is decreased with increasing saturation of the filter cartridge; the flow is blocked if the filter cartridge is fully saturated Replacement filter cartridge for the fuel filter

QUADRO-CV 330, on Rietberg TRAILER, 1-axle, see page 45

Art. no.

Price (€)

73165

132.-

39759

70.-

MOBILE FUEL SYSTEMS FOR PETROL

RIETBERG CONTAINERS 2017

FUEL CONTAINERS CONTY-B 330 [PETROL]

Their benefits › Certification for road, railway, inland shipping and maritime transport as well as air freight for an unlimited time › UN approval as hazardous substance packaging and therefore no costs for repeated inspection. › Transport under simplified conditions without ADR certificate and without hazardous substance marking › Full hot-dip galvanised steel design for extreme durability › Approved as storage container according to the building rules list for flammable and water-polluting fluids › Uncomplicated and secure rigging › The storage space can also be accessed after rigging of the container › Stackable 2-high

Technical characteristics › Hot-dip galvanised on the inside and outside › Single-walled › Pump mounted in a securely lockable storage space › Lockable, spring-mounted cover › Discharge nozzle bracket › Lockable suction line › Ventilation line with shut-off ball valve and deflagration arrester (IBExU08ATEX2122x) 1 › Continuous mechanical filling level indicator › Filling nozzle with securely and tightly lockable screw-fitting and flame arrester (PTB Ex 12-42028) 2 › Ground connection › Base construction for secure lifting by forklift or pallet truck › 4 lifting brackets for safe crane lifting acc. to BGI 556 › Self-priming pump, readily mounted on the container, including hose and ZVA/outlet valve

APPROVAL 1A2W/Y/...14374 DIBT, BERLIN BUILDING RULES LIST A

PART 1, 15.19

Technical data Dimensions (mm) Type / content

CONTY-B 330

800

950

Weight (kg)

Approval

110

D/BAM14374/1A2W

Available models Rated pumping capacity1) (l/min)

Type / content

Pump

CONTY-B 330-TPex

Manual

0.35 l/stroke

AC 230 DC 12

CONTY-B 330-230ex CONTY-B 330-12ex2)

Hose length (m)

Discharge nozzle

Art. no.

Price (€)

2.5 AV 20

ex-proof

Special features

99073

1,920.-

4.0 ZVA

ex-proof

99256

2,290.-

4.0 ZVA

ex-proof

99255

2,278.-

1) The rating speciﬁed by the manufacturer applies to a free outlet and can be reduced by installing components like discharge nozzles, discharge hoses and ﬂow meters

RIETBERG CONTAINERS 2017

MOBILE FUEL SYSTEMS FOR PETROL

Accessories

PUMP ACCESSORIES

11 4

Type

Description

Art. no.

Price (€)

Connector for R50 ex 12

Battery clips for the use outside of the Ex-zone only, including 10 m cable, readily mounted 3 Ex plug for the use within Ex zone 1, make: steel, series 8571, including 6 m cable, fully assembled 4 Ex-coupling for the use within Ex-zone 1, make: steel, series 8571, ready for connection on site Schuko plug for the use outside of the Ex-zone only, including 10 m cable, fully assembled 5 Ex-plug for the use within Ex-zone 1; make: steel, series 8570, including 6 m cable, fully assembled 6 Ex coupling for the use within Ex zone 1; make: steel, series 8570, ready for connection on site

99399

25.-

99400

340.-

99401

1,115.-

99396

25.-

99397

221.-

99398

510.-

Connector for R50 ex 230

The pumps mentioned on page 64 are suitable for flammable fluids and comprise a corresponding explosion protection. The plugs and battery clips offered may only be used in the respective applicable areas. The Ex-zones must be stipulated by the operator (see Industrial Safety Regulations). If, in the area of the power supply point, Ex-zones can occur, explosion protected plugs and coupling systems must be used.

FLOW METERS, NOT CALIBRATABLE, NOT FOR CUSTODY TRANSFER Flow rate (l/min) Type / content

Description

PZ300-ex

Mechanical roller flow meter, ex-proof

EZ24-ex

Digital turbine flow meter, ex-proof

Min.

Art. no.

Price (€)

Max.

120

97149

241.-

120

46026

245.-

MOBILE FUEL SYSTEMS FOR PETROL

RIETBERG CONTAINERS 2017

FUEL CONTAINERS CONTY 250 [PETROL]

Their benefits › Certification for road, railway, inland shipping and maritime transport as well as air freight for an unlimited time. › UN approval as hazardous substance packaging and therefore no costs for repeated inspection. › Transport under simplified conditions without ADR certificate and without hazardous substance marking › Full steel design for extreme durability › Approved as storage container according to the building rules list for flammable and water-polluting fluids › Uncomplicated and secure rigging › The storage space can also be accessed after rigging of the container › Explosion blast proof; therefore, no flame arresters are required › Self-priming pump with adapter, readily mounted on the container, including hose with ZVA/outlet valve

Technical characteristics › High-quality RAL 5003 (sapphire blue) coating on the outside, raw on the inside. Hot-dip galvanised cover. Special colours available on request › Single-walled › Filler neck with safely and tightly lockable fitting › Pump mounted in a securely lockable storage space › Discharge nozzle bracket › Lockable suction line › Lockable ventilation line › Continuous mechanical filling level indicator › Ground connection › Base construction for secure lifting by forklift or pallet truck › 2 lifting brackets for safe crane lifting acc. to BGI 556 2 › Self-priming pump with adapter, readily mounted on the container, including hose and ZVA/outlet valve

APPROVAL

1A1/X/...14373 DIBT, BERLIN BUILDING RULES LIST A

PART 1, 15.19

Technical data Dimensions (mm) Type / content

CONTY 250

800

1270

Weight (kg)

Approval

D/BAM/14373/1A1

RIETBERG CONTAINERS 2017

MOBILE FUEL SYSTEMS FOR PETROL

Available models

Pump

Rated pumping capacity1) (l/min)

Manual

0.35 l/stroke

DC 12 4

AC 230

Type

CONTY 250-TP 2)

CONTY 250-12ex

CONTY 250-230ex2)

Hose (m)

Discharge nozzle

Special features

Art. no.

Price (€)

97280

1,464.-

2.5 AV 20

ex-proof

4.0 ZVA

ex-proof

97285

1,782.-

4.0 ZVA

ex-proof

97286

1,804.-

The pumps mentioned above are suitable for flammable fluids and comprise a corresponding explosion protection. The plugs and battery clips offered may only be used in the respective applicable areas. The Ex-zones must be stipulated by the operator (see Industrial Safety Regulations). If, in the area of the power supply point, Ex-zones can occur, explosion protected plugs and coupling systems must be used.

Accessories PUMP ACCESSORIES Type

Description

Art. no.

Price (€)

Connector for R50 ex 12

Battery clips for the use outside of the Ex-zone only, including 10 m cable, readily mounted Ex plug for the use within Ex zone 1, make: steel, series 8571, including 6 m cable, fully assembled Ex-coupling for the use within Ex-zone 1, make: steel, series 8571, ready for connection on site Schuko plug for the use outside of the Ex-zone only, including 10 m cable, fully assembled Ex-plug for the use within Ex-zone 1; make: steel, series 8570, including 6 m cable, fully assembled Ex-coupling for the use within Ex-zone 1; make: steel, series 8570, ready for connection on site

99399

25.-

99400

340.-

99401

1,115.-

99396

25.-

99397

221.-

99398

510.-

Art. no.

Price (€)

Connector for R50 ex 230

FLOW METERS, NOT CALIBRATABLE, NOT FOR CUSTODY TRANSFER Flow rate (l/min) Type / content

Description

PZ300-ex

Mechanical roller flow meter, ex-proof

EZ24-ex

Digital turbine flow meter, ex-proof

Min.

Max.

120

97149

241.-

120

46026

245.-

1) The rating specified by the manufacturer applies to a free outlet and can be reduced by installing components like discharge nozzles, discharge hoses and flow meters

MOBILE FUEL SYSTEMS FOR DIESEL

RIETBERG CONTAINERS 2017

IMPORTANT LEGAL REGULATIONS FOR MOBILE FUEL SYSTEMS Transport of hazardous substances, e.g. petrol or diesel, is generally subject to comprehensive national and international regulations. National: GGVSEB GGVSee

Ordinance on the transport of dangerous goods by road, rail, and inland waterways Ordinance on the transport of dangerous goods by maritime shipping

International: ADR International agreement on transport of dangerous goods by road RID International agreement on transport of dangerous goods by railway ADN International agreement on transport of dangerous goods by inland shipping IMDG code International agreement on transport of dangerous goods by seagoing vessels

For transport of hazardous substances, type-tested and approved containers like tankers, tank containers and packaging including intermediate bulk containers (IBCs) are generally required. Rietbergwerke manufacture tank containers, IBCs and packaging. In terms of their capacity, tank containers are theoretically unlimited; IBCs have a maximum capacity of 3,000 litres and packaging is restricted to a capacity of 450 litres. As mentioned, the speciďŹ ed regulations are generally applicable. However, there are diďŹ&#x20AC;erences in application depending on the approval of the container and exceptions. Please note that the conditions for safe transport and universal application are only met by approved containers. To ensure better readability, the term ADR is used in the following to refer to all regulations on transport of hazardous substances.

RIETBERG CONTAINERS 2017

MOBILE FUEL SYSTEMS FOR DIESEL

Approval and type testing Whether a container is approved packaging or an approved IBC can be identified clearly by its code.

Example for packaging coding of a Rietberg CONTY 250: UN 1A1 / 1 1

/ 250 / 15 / D / BAM 14373-rietberg

Manufactured, tested and approved according to UN packaging regulations Steel barrel with fixed cover Approved for substances of packaging groups I, II and III Test pressure in kPa Manufacturing year Country of approval Approving institution, approval number and manufacturer

RIETBERG KRAFTSTOFFCONTAINER Art. Nr. 38378

2 3 4 5 6 7

Marking Packaging and IBCs are to be marked as follows according to ADR chapter 5.2: › The UN no. of the transported substance (e.g. diesel: UN 1202) › The mark for environmentally hazardous substances (fish and tree, black on white surface) › Hazard label (e.g. diesel: no. 3, flame, black or white on red surface) The specified markings have to be attached on two opposite sides of IBCs with a capacity of more than 450 litres and on one side of smaller packaging. Additionally, the containers are to be labelled with substancerelated hazard warnings according to GHS. In addition to the container, we provide a set of adhesive labels for initial marking. Additionally, a pictogram on the ICB specifies whether the container is stackable or not. The following illustration is an example for marking of an IBC for diesel.

DOPPELWANDIGE AUSFÜHRUNG

XXXX kg max

www.rietberg-behaelter.de

UN 1202

Front view

1 2 3 4 5

1 2 3

Side view Example for IBC coding of a Rietberg QUADRO-C 1000: UN 31A / Y / 01.15 / D / BAM 13081-rietberg / 9800 / 1506 1 1 2 3 4 5 6 7 8

Manufactured, tested and approved according to UN packaging regulations Steel IBC for fluids Approved for substances of packaging groups II and III Manufacturing month and year Country of approval Approving institution, approval number and manufacturer Test load of the stacking pressure test in kg. "0" is specified if the IBC is not stackable Maximum admissible gross weight in kg

No.

Quantity

Type

UN 1202

Description

Transported substance diesel Hazard label

Environmentally hazardous substances

Safety information

not stackable

XXXX kg max

stackable (admissible stacking load is specified!)

PACKAGING AND IBCS

RIETBERG CONTAINERS 2017

MOBILE FUEL SYSTEMS FOR DIESEL

Inspection and testing All IBCs are subject to mandatory repeated inspection and testing in intervals of 2 ½ years as of the date of the first (factory) inspection: Inspection after 2 ½ years by qualified professionals according to BAM-GGR 002, no. 5.3 › Inspection of the external condition › Inspection of marking › Inspection of the function of the control equipment, i.e. all fittings of the container › Leakage test with air with an overpressure of 0.2 bar Inspection after 5 years by qualified professionals or inspection bodies according to BAM-GGR 002, no. 5.1 or 5.2 To be carried out in addition to the inspection after 2 ½ years: » Checking of compliance with the type testing certificate » Inspection on the inside For packaging, no repeated inspection and testing is required.

Simplified transport Under defined conditions, ADR section 1.1.3.6 enables transport of hazardous substances under simplified conditions (without ADR certificate or vehicle marking, etc.) if the specified maximum capacity per transport unit, for example, Pack. size

Transp. cat.

Petrol

Medium

333 litres

Max. capacity

Diesel

III

1,000 litres

is not exceeded. If goods with different transport categories are transported in the same unit, the 1000 points rule applies. For determination of the total score, the volumes of transport category 2 are multiplied by a factor of 3 and the volumes of transport category 3 by a factor of 1. For simplified transport, the total score of 1,000 points must not be exceeded. For example: › Petrol, II, 2: 150 litres x 3 = 450 points › Diesel, III, 3: 500 litres x 1 = 500 points › Total: 950 points Even though numerous ADR regulations do not need to be taken into account for simplified transport, a few rules still have to be observed: › Marking and labelling (ADR chapter 5.2) must be complete and readable › A 2 kg fire extinguisher (ADR section 8.1.4.1 (a)) must be carried. › A shipping document (ADR section 5.4.1) must be carried. Of course, it is also generally required that the container: › is technically intact › is tightly sealed during transport and, as applicable, that repeated inspection and testing have been carried out.

CRAFTSMAN REGULATION This refers to containers which are used based on the exceptional regulation according to ADR 1.1.3.1 c), the so-called “craftsman regulation”. ADR defines various exemptions and exceptional regulations, among others those in connection with the type of transport. For instance, according to subsection 1.1.3.1 c), the provisions of ADR do not apply to “transports which are carried out by companies in connection with their main task”. At the same time, however, direct “internal or external supply operations” are excluded from this exemption. What does that mean? The implementing directives for hazardous goods (RSEB) provide annotations on the ADR and the following definition on subsection 1.1.3.1 c): Section 1-6.1 Exempted are transports for direct use, e.g. › Paint in the vehicle of a painter › Oxygen or acetylene cylinders in the vehicle of a welder › Fuel for filling lawn mowers in the vehicle of a municipal employee Section 1-6.2 Intermediate supplies for fuel systems do not directly fall under the exemption regulation of subsection 1.1.3.1 c). Therefore, one precondition for making use of the so-called “craftsman regulation” is that the fuel (together with the machine) is transported directly in order to be consumed directly, while only residual quantities are transported back again. The “craftsman regulation” does not include transports for distribution purposes, i.e. the supply of multiple machines on different construction sites (supply operations) as well as drives to the next service station (intermediate supplies), for instance. However, the “craftsman regulation” also indicates that containers can be used which are neither type-tested nor comprise a UN approval. Notes on the use of the different container types can be found on page 34 f.

RIETBERG CONTAINERS 2017

MOBILE FUEL SYSTEMS FOR DIESEL

TANK CONTAINER Type testing and approval Whether containers are approved tank containers can be clearly identiﬁed according to the approval number. For example: /

1 1 2 3

4 5

BAM

12345

Front view

5 6 7 8

Country of approval Approving institution Only for older approvals: Marking for the transport carrier the container is approved for. (e.g. 17 = road) This is no longer speciﬁed for newer approvals Approval serial number Tank container

The following illustration is an example for marking of a KC-AG 5500 for diesel.

6 7 8 30 1202

Side view Marking The approval number of a tank container is also attached on two opposite sides at the height of the centre of the container. The tank coding is also speciﬁed at two opposite sides. For example:

1 2 3 4

Tank for ﬂuids Calculation pressure: 4 bar Tank with top openings without openings under the ﬁlling level Air-tight tank

Additionally, the official designation of the (currently) transported substance is to be specified according to ADR paragraph 6.8.2.5.2 as well as the name of the owner and the operator, the capacity and the net weight with the admissible maximum weight. According to ADR subsection 5.3.1.2, large signs (size: 250 x 250 mm, example for diesel: no. 3, flame, black or white on red surface) have to be attached to both sides. According to ADR section 5.3.6, large signs (250 x 250 mm) with the mark for environmentally hazardous substances must be attached on both sides. According to ADR section 5.3.2, orange marking is to be applied. This may be a warning sign or an adhesive label [size: 400 x 300 mm, example for diesel: top 30 (substance-specific number for hazard marking), bottom 1202 (UN number for diesel)]. Together with the container, we provide everything required for initial marking.

L4DH D/BAM/17 12345/TC

7 3

No.

Quantity

Type

30 1202

L4DH D/BAM/17 12345/TC

Description

Warning sign. 400 x 300 mm Approval number Hazard label. 250 x 250 mm

Environmentally hazardous substances. 250 x 250 mm

Inspection and testing All tank containers are subject to mandatory repeated inspection and testing according to EN 12972 by a qualified professional in intervals of 2½ years as of the date of the first (factory) inspection. This generally includes: › Water pressure leakage testing with an overpressure according to the approval › Inspection on the inside › Function check of all equipment components Transport For transport of tank containers, all applicable ADR rules and regulations must be observed. An ADR certificate for tankers is required. Transport under simplified conditions like for IBCs and packaging is not possible for tank containers.

FUEL CONTAINERS FOR POWER UNITS AND HEATERS

RIETBERG CONTAINERS 2017

FUEL CONTAINERS FOR POWER UNITS AND HEATERS

03 FUEL CONTAINERS FOR POWER UNITS AND HEATERS

FUEL CONTAINERS FOR POWER UNITS AND HEATERS

RIETBERG CONTAINERS 2017

FUEL CONTAINERS FOR POWER UNITS AND HEATERS

Whether on construction sites in winter, in festival tents or in industrial operations, power units or heaters are essential for maintaining the power supply or for ventilating or dehumidifying storage and production facilities. However, these power units or heaters must be supplied with diesel or fuel oil in order to function. Rietberg QUADRO-AG fuel containers are specially designed for professional fuel supply directly at the location of use. They are approved as intermediate bulk containers (IBC) and enable transport under "simplified conditions" according to ADR 1.1.3.6 including supply operations. Utilisation is not restricted as is the case for other standard mobile fuel systems. For type-tested plastic IBCs or composite IBCs (steel with interior plastic container), the duration of use is limited to 5 years. For transport of up to 1,000 litres of diesel, no ADR certificate and no hazardous substance marking of vehicles and equipment is required. This product can be used for decades without any problems. Even for the storage of fuels like diesel and fuel oil, Rietberg fuel containers are the perfect choice of storage containers thanks to their general technical approval. QUADRO-AG containers are also suitable for application outdoors and in water protection areas. Example applications: In the construction industry › Heating of construction sites in winter › Construction drying › Power supply In industry, agriculture and events › Heating of halls › Heating of tents at events, trade fairs, exhibitions › Emergency power supply for renovation/construction

FUEL CONTAINERS FOR POWER UNITS AND HEATERS

RIETBERG CONTAINERS 2017

FUEL CONTAINERS QUADRO-AG [DIESEL]

3 2

Their benefits › Timely unlimited UN approval as transport container (IBC) for road (ADR), railway (RID), inland shipping (ADN) and maritime (IMDG code) transport of hazardous substances › German general technical approval as storage container for storage without additional collection tray › Outdoor installation › Application in water protection areas › Transport under simplified conditions without ADR certificate and without hazardous substance marking up to a capacity of 1000 litres › Central and safe arrangement of ports and fittings in a storage box including lockable folding cover › Up to QUADRO-AG 1000, stackable 3-high;

4 2 3

Technical characteristics › Hot-dip galvanised on the inside and outside › Double-walled permanent off-grid vacuum leakage monitoring at both walls 1 › Continuous mechanical filling level indicator › Ventilation line with shut-off ball valve › Return line port › Ports for intake and return line, 1/2” external thread (with QUADRO-AG 3000 1” external thread) › Base construction for secure lifting by forklift truck › 2 lifting brackets (up to QUADRO-AG 1000); 1 central lifting bracket (QUADRO-AG 2000); 4 lifting brackets (QUADRO-AG 3000), safe crane lifting according to BGI 556

APPROVAL 31A/Y...13081 GENERAL TECHNICAL APPROVAL, DIBT, BERLIN

Z-38.12-230

FUEL CONTAINERS FOR POWER UNITS AND HEATERS

RIETBERG CONTAINERS 2017

Available models Dimensions (mm) Type / content

Hot-dip galvanised

Weight (kg)

Approval

Art. no.

Price (â&#x201A;¬)

98591

1,785.-

96800

1,887.-

79397

6,209.-

97743

3,483.-

98192

3,956.-

98193

3,917.-

98194

4,090.-

98195

4,395.-

STANDARD MODELS

QUADRO-AG 450

3 6

1215

815

800

200

QUADRO-AG 1000

2 7

1215

1000

1200

285

QUADRO-AG 3000

5 9

2390

1190

1510

838

D/BAM/12180/31A Z-38.12-230 D/BAM/13081/31A Z-38.12-230 D/BAM/12180/31A Z-38.12-223

QUADRO-AG 2000-1

10 8

2215

815

1580

565

QUADRO-AG 2000-2

11 8

2215

815

1620

586

QUADRO-AG 2000-3

12 8

2215

815

1620

608

QUADRO-AG 2000-4

13 4 8

2215

815

1620

629

QUADRO-AG 2000-5

14 8

2215

815

1620

651

QUADRO-AG 2000-1 Container with protective fitting bracket, not stackable

QUADRO-AG 2000-4 Container with 1 x storage box and 1 x corner fittings, stackable

D/BAM/14552/31A Z-38.12-223 D/BAM/14552/31A Z-38.12-223 D/BAM/14552/31A Z-38.12-223 D/BAM/14552/31A Z-38.12-223 D/BAM/14552/31A Z-38.12-223

QUADRO-AG 2000-2 Container with protective fitting bracket and 1 x corner fittings, stackable

QUADRO-AG 2000-5 Container with 2 x storage boxes, stackable

QUADRO-AG 2000-3 Container with 1 x storage box, not stackable

QUADRO-AG 2000, MODULAR BUILD-UP

FUEL CONTAINERS FOR POWER UNITS AND HEATERS

RIETBERG CONTAINERS 2017

Accessories Type

Description

Fill limit indicator

15 Fill limit indicator for Diesel QUADRO-AG 450 and 1000; to prevent overfilling of containers from a tanker with fixed line coupling; already included in the scope of delivery of QUADRO-AG 2000 and 3000 Q-AG 450 heater Screw-in heater with fixed heating element; control head with automatic 8 – 12 °C temperature control and 45 °C overheat protection; Voltage 230 V / 50 Hz, power 500 W Q-AG 1000 heater 16 Screw-in heater with fixed heating element; control head with automatic 8 – 12 °C temperature control and 45 °C overheat protection; Voltage 230 V / 50 Hz, power 500 W Q-AG 2000 heater Screw-in heater with fixed heating element; control head with automatic 8 – 12 °C temperature control and 45 °C overheat protection. Voltage 230 V / 50 Hz, power 500 W Q-AG 3000 heater Screw-in heater with fixed heating element; control head with automatic 8 – 12 °C temperature control and 45 °C overheat protection. Voltage 230 V / 50 Hz, power 500 W ⅜" siphon 17 Adjustable siphon protection valve, 0.05 - 0.4 bar, ⅜"; maximum flow rate 220 protection valve l/h. It prevents the unintended discharge of the container; max. installation height 4 m above floor level ½" siphon protection valve Firmly set siphon protection valve, 0.15 bar, ½”; prevents the unintended discharge of the container; maximum installation height 1.5 m above floor level Suction line Additional suction line with shut-off ball valve, ½” external thread

Return line

QUADRO-AG 450

Additional return line port, ½” external thread

Art. no.

Price (€)

97068

73.-

47041

385.-

45370

393.-

46049

409.-

45148

393.-

97612

83.-

97636

71.-

97872

79.-

97871

25.-

FUEL CONTAINERS FOR POWER UNITS AND HEATERS

RIETBERG CONTAINERS 2017

Hose line kits Type

NW 8 hose package

NW 8 hose package "any length"

½" coupling set "RECTUS" NW 13 hose package

NW 13 hose package "any length"

½" coupling set non-drip

Description 18 Consisting of a 5.0 m hose DN 8x4, metal mesh-coated, with

coupling sleeve on one end and a coupling plug (½", NW 7,4, Rectus 26 – compatible) on the other end Consisting of a hose DN 8x4, metal mesh-coated, with coupling sleeve on one end and coupling plug (½", NW 7,4, Rectus 26 – compatible) on the other end 19 Consisting of each 1 coupling sleeve and coupling plug ½", NW 7,4,

Rectus 26 – compatible each 20 Consisting of 5.0 m “Gelbring” high pressure hose DN 13x4.5 with a coupling sleeve on one end and a coupling plug (½", NW 12.5, non-drip) on the other end Consisting of a “Gelbring” high pressure hose DN 13x4.5 with a coupling sleeve on one end and a coupling plug (½", NW 12.5, non-drip) on the other end 21 Consisting of each 1 coupling sleeve and ½", NW 12.5, non-drip

coupling plug

Length (m)

Art. no.

Price (€)

98788

125.-

1. metre

98790

72.-

each additional metre –

98790-1

13.-

98792

34.-

98789

243.-

1. metre

98791

137.-

each additional metre –

98791-1

27.-

98793

69.-

FUEL CONTAINERS FOR POWER UNITS AND HEATERS

RIETBERG CONTAINERS 2017

CASCADING SYSTEM The Rietberg cascading system is the ideal solution for systems with high flow rates and/or long operating times. This system enables combination of multiple tanks into a major unit via one centralised master tank. The central component is a master tank that looks like a conventional tank from the outside 1 . Its storage box securely holds a durable dispensing pump with intelligent control filling this tank from the other tanks. This offers the special feature of free selection of the sizes and models of the connected tanks. Up to 4 units can be connected in parallel. This allows for numerous combinations for individual applications. On connection of a power unit 2 , the master tank can be practically positioned close to the consumer. Due to the required feed and return lines, this distance is usually to be minimised to protect the diesel pump of the motor. The downstream tanks may be positioned at a greater distance, e.g. for convenient access with tankers.

Sufficient diesel cooling is ensured by the relatively even filling level in the master tank. The respective switching points can be provided with a password for access by the user and easily adjusted to the individual conditions. The supply tanks 3 (any type, e.g. QUADRO-AG series, page 66, or KA, page 16) are discharged by the master tank via intelligent control to ensure sufficient supply to the consumer. If the downstream tanks are emptied increasingly, a signal is available which provides the operator with a sufficient, adjustable time window for punctual refilling. The Rietberg cascading system does not require complex filling level monitoring of the individual supply tanks and is particularly fail-safe. Additional protection mechanisms and control settings ensure smooth operation. This way, minor faults in a tank may be compensated by the master tank without failure of the system to be supplied. The respective tank is requested with a delay to ensure that the capacity of the available tanks is fully used.

INTEGRATED PUMP AND CONTROL UNIT

Fig. installation and connection layout

FUEL CONTAINERS FOR POWER UNITS AND HEATERS

RIETBERG CONTAINERS 2017

FUEL CONTAINERS QUADRO-C KASKADE

Their benefits › Timely unlimited UN approval as transport container (IBC) for road (ADR), railway (RID), inland shipping (ADN) and maritime (IMDG code) transport of hazardous substances › German general technical approval as storage container. Storage without additional collection tray › Outdoor installation › Application in water protection areas › Transport under simplified conditions without ADR certificate and without hazardous substance marking up to a capacity of 1000 litres › Central and safe arrangement of ports and fittings in a storage box including lockable folding cover › Stackable 3-high

Technical characteristics › Hot-dip galvanised on the inside and outside › Double-walled permanent oﬀ-grid vacuum leakage monitoring at both walls 1 › Continuous mechanical ﬁlling level indicator › Lockable ventilation and suction lines › Ports for feed and return line › Base construction for secure lifting by forklift truck › 4 lifting brackets for safe crane lifting acc. to BGI 556 › Integrated pump with control for connection of up to 4 tanks

APPROVAL

31A/Y...13081 GENERAL TECHNICAL APPROVAL, DIBT, BERLIN

Z-38.12-230

Available models Dimensions (mm) Type / content

QUADRO-C 1000 Kaskade, master tank

1215

1000

1290

Weight (kg)

316

Hot-dip galvanised Approval

D/BAM/13081/31A Z-38.12-230

Art. no.

Price (€)

97684 10,557.-

[DIESEL]

FUEL CONTAINERS FOR POWER UNITS AND HEATERS

RIETBERG CONTAINERS 2017

FUEL CONTAINERS QUADRO-TA 700 [DIESEL & PETROL]

APPROVAL 31A/Y...11336 1 GENERAL TECHNICAL APPROVAL, DIBT, BERLIN

Z-38.12-199

Their benefits › Designed for use in extreme conditions › UN approval as transport container (IBC) for road (ADR), railway (RID), inland shipping (ADN) and maritime (IMDG code) transport of hazardous substances for an unlimited time › German general technical approval as storage container for flammable fluids of all types and other water polluting fluids › Installation in buildings and outdoors. Including water protection areas › Full steel design for extreme durability and long service life › The containers are hot-dip galvanised on the inside and outside for optimum protection against corrosion; different models available › Individual equipment options offer practical solutions for individual requirements › Stackable 3-high › Transport under simplified conditions without ADR certificate and without hazardous substance marking. Up to 1,000 litres of diesel, 330 litres petrol per vehicle Technical characteristics › Hot-dip galvanised on the inside and outside. On request with additional coating on the hot-dip galvanised outside surface or raw on the inside and coated on the outside with priming › Double-walled permanent off-grid vacuum leakage monitoring at both walls 1 › Scaled dipstick › Ventilation line with shut-off ball valve › Liquid-proof protective box for fittings including divided equipment compartment and lockable, spring-mounted cover. 1 document pocket integrated in the cover › Folding storage compartment in the clearance on the front of the container 2 › 2 suction lines DN 10 with shut-off ball valve 3 and foot valve directed into a sump in the lower base of the container. The lines are directed to the front of the container and equipped with plug connections › Filler line with 2x2½" safety screw fitting, lockable › 2 reserve sleeves 2" closed with plugs › Cleaning opening with a diameter of 500 mm and cover with arrangement of all inlet ports and lines into the container 4 › Base construction for secure lifting by forklift or pallet truck › Each with 4 corner fittings, lifting and rigging brackets › Safe crane lifting acc. to BGI 556 › Earthing at the base frame

FUEL CONTAINERS FOR POWER UNITS AND HEATERS

RIETBERG CONTAINERS 2017

Available models Dimensions (mm) Type / content

QUADRO-TA 700

Hot-dip galvanised

Weight (kg)

Approval

Art. no.

Price (€)

D/BAM 11336/31A Z-38.12-199

98783

4,568.-

Description

Art. no.

Price (€)

Consisting of filling tube with flame arrester (approval no. PTB Ex 12-42028) and deflagration arrester (approval no. IBExU08ATEX2122 X) for the ventilation line; required for use as storage container for media with a flash point below 55 °C Heater for suspension into the container, voltage 230 V/50 Hz, power 25 W, 1-pin controller, approx. 8 °C limiter, 1-pin 45 °C, steel housing, 1.4571 stainless steel tubular heater, 10 m connection cable with plug 1 x 5.0 m hose, NW 8x4, metal mesh-coated, with a coupling on one end and plug on the other end (½", NW 7.4, RECTUS 26 – compatible) 1 x 5.0 m hose, high-pressure hose, NW 13x4.5, with coupling on one end and plug on the other end, NW 12.5, non-drip (connection ½") Consisting of 2 hoses with 9.0 m each, NW 8x2, metal mesh-coated, with coupling on one end and plug connection on the other end, NW 9, non-drip (FIRG 38, ⅜“ port), including dust protection caps Fully mounted with the necessary connection lines and couplings or plug connections for application in combination with hose line kit, art. no. 74705 For secure storage of 1 hose of the hose line kit art. no. 74705 and the fuel oil bleeder art. no.: 74709 Water absorber including screen cylinder for the absorber pad, suspension chain and sealing plug, 10 water absorber pads, PE bag for disposal; Environmental protection kit including 2 oil binding agent cloths with PE bag for disposal Complete coating on the outside (scope: whetting, 1 x adhesive primer, 1 x top coat) of the container on the hot-dip galvanised surface, RAL colour as required; corrosion protection rating C4, protection period M Complete coating on the outside (scope: whetting, 1 x adhesive primer, 2 x top coat) of the container on the hot-dip galvanised surface, RAL colour as required; corrosion protection rating C5, protection period M Complete coating on the outside of the tank on the hot-dip galvanised surface; scope and applied materials according to customer requirements

98784

545.-

74704

418.-

98788

125.-

98789

243.-

74705

290.-

74709

173.-

42015

83.-

98799

536.-

98785

622.-

98787

867.-

1200

800

1300

400

Minimum order quantity: 25

Type

Flashback arrestor

Tank heating

NW 8 hose line NW 13 hose line NW 8 hose line

Fuel oil bleeder Transport bag Water absorber/ environmental protection kit Coating

Accessories

98786 Upon request

FUEL CONTAINERS FOR POWER UNITS AND HEATERS

RIETBERG CONTAINERS 2017

FUEL CONTAINERS KC-AG 5500 [DIESEL] Their benefits › UN approval as transport container (tank container) for road (ADR) transport of hazardous substances for an unlimited time › Operating pressure: 2.65 bar › Full steel design for extreme durability and long service life › Corner ﬁtting according to the surface area of a 10’ ISO container for secure mounting on the vehicle 6 › Application in water protection areas › Individual equipment options with pumps and additional accessories oﬀer practical solutions for individual requirements

Technical characteristics › Hot-dip galvanised on the inside and outside. On request with additional coating on the hot-dip galvanised outside surface or raw on the inside and coated on the outside with priming › Double-walled permanent off-grid vacuum leakage monitoring at both walls 1 › Dome with a diameter of 500 mm 5 › Mounted on the dome cover: » Continuous mechanical filling level indicator » Ventilation line with certified shut-off ball valve » Suction line with certified shut-off ball valve » Return line » Filler neck with safety screw fitting, lockable » Fill limit indicator » Safety valve › All fittings in a liquid-proof storage box with lockable cover 5 › Base construction for secure lifting by forklift truck › Central lifting bracket, safe crane lifting acc. to BGI 556 7 › Top protective frame designed and suitable for 1-high stacking of empty containers 2 7 › Access ladder › Pedestal next to the storage box 2

APPROVAL D/BAM/1710/TC

FUEL CONTAINERS FOR POWER UNITS AND HEATERS

RIETBERG CONTAINERS 2017

Available models Dimensions (mm) Type / content

KC-AG 5500-1 KC-AG 5500-2 KC-AG 5500-3

Description 4 Not stackable, ladder on the

side 3 Not stackable, ladder on the side, ISO corner ﬁttings 2 Stackable, top protective frame with integral ladder and platform, ISO corner ﬁttings

Weight (kg)

Hot-dip galvanised Approval

2940

1900

2120

1600 D/BAM/1710/TC

2991

2438

2210

1900 D/BAM/1710/TC

2991

2438

2360

2300 D/BAM/1710/TC

Art. no.

Price (€)

77660 Upon request 77661 Upon request 97841 Upon request

Type

KC-AG 5500 heater

⅜" siphon protection valve 1¼" siphon protection valve

KC-AG 5500-2

Description

Screw-in heater with fixed heating element; control head with automatic 8 – 12 °C temperature control and 45 °C overheat protection; Voltage 230 V/50 Hz, power 1000 W Adjustable 0.05 – 0.4 bar siphon protection valve, ⅜"; max. flow 220 l/h. Prevents unintended discharge of the container; max. installation height 4 m above floor level Adjustable 0.15 to 0.30 bar siphon protection valve, 1¼" port; prevents unintended discharge of the container; max. installation height 3 m above floor level

Art. no.

Price (€)

46051 Upon request 97612 Upon request 50605 Upon request

KC-AG 5500-1 The arrangement of the ladder shown here is a special edition.

Accessories

FUEL CONTAINERS FOR POWER UNITS AND HEATERS

RIETBERG CONTAINERS 2017

LUBRICATION OIL CONTAINER QUADRO-C oel

[OILS]

2 2

Technical characteristics › Raw on the inside and coated on the outside (RAL 7035, light grey) › Feet and lifting brackets hot-dip galvanised and coated › Double-walled permanent off-grid vacuum leakage monitoring at both walls 1 › Continuous mechanical filling level indicator › Ventilation line with shut-off ball valve › Lockable suction line › Filler neck with safety screw fitting, lockable › Lateral opening for hose lines and cables › Base construction for secure lifting by forklift truck › 4 lifting brackets, safe crane lifting acc. to BGI 556 › Lockable, spring-mounted cover, hot-dip galvanised, with 3-point locking and safety locking cylinder

APPROVAL

31A/Y...13081

Additional sizes and versions available on request.

GENERAL TECHNICAL APPROVAL, DIBT, BERLIN

Z-38.12-230

Available models Dimensions (mm) Type / content

QUADRO-C 330 oel QUADRO-C 450 oel QUADRO-C 700 oel QUADRO-C 1000 oel

Weight (kg)

Coated Approval

Art. no.

Price (€)

99402

1,989.-

1215

815

760

217 D/BAM/13080/31A \\ Z-38.12-230

1215

815

895

234 D/BAM/13080/31A \\ Z-38.12-230

99403

2,102.-

1215

815

1160

270 D/BAM/13080/31A \\ Z-38.12-230

99404

2,349.-

1215

1000

1290

316 D/BAM/13081/31A \\ Z-38.12-230

99405

2,670.-

1) The rating specified by the manufacturer applies to a free outlet and can be reduced by installing components like discharge nozzles, discharge hoses, flow meters etc. 2) Cannot be combined with all installations. Similar figure, see page 44

FUEL CONTAINERS FOR POWER UNITS AND HEATERS

RIETBERG CONTAINERS 2017

5 6

12 11

14 8

Equipment GEAR PUMPS

Dry, self-priming, high durability and long service life, incl. bypass valve for protection against pump damage Scope of delivery: Motor pump, 4 m hose kit with kink protection, angular swivel joint, oil discharge nozzle with axial swivel joint, connection cable, adapter for mounting on a Rietberg container, mounting on ordered Rietberg container Rated pumping capacity1) (l/min)

Type

VZ10/12

Maximum viscosity (cSt)

Voltage (V)

Special features

Hose

Art. no.

Price (€)

600

DC 12

–

NW19

99406

509.-

VZ14/230 VZ25/230

2,000

AC 230

–

NW19

99407

635.-

VZ30/400

25 25

1,200 1,200

AC 230 Conveying heights up to 4 m AC 400 Oﬀshore version

NW19 NW19

99408 99409

2,570.2,995.-

VZ50/400

5,000

AC 400 Oﬀshore version

NW25

99410

3,305.-

Art. no.

Price (€)

OTHER Type

Heater Q-C oel

Description

Heater for oils, automatic temperature regulations and overheating protection, voltage 230 V/50 Hz, power 500 W, surface output < 0.4 W/cm2K Thermometer Q-C oel 10 Analogue thermometer with indicator, display from -20 to +60 °C

99411 Upon request 99412 117.-

Overﬁll safeguard 11 Sub-distribution, protection type IP 54 with transducer, mounted in a small housing Q-C oel in the container. Fully connected Frequency converter 12 For regulating the pump output up to 1.5 kW and 230 V Q-C oel Remote control On/oﬀ, corded, for pump switching 13

99413

Collision protection ZVA 25 Slimline

On/oﬀ with speed regulation, corded, for pump switching with frequency converter up to 1.5 kW and 230 V 3 Plastic protectors as plug system, mounted on the perimeter of the container

Automatic discharge nozzle DN25, maximum flow rate 140 l/min., approval for fuel oil and diesel, with axial swivel joint Integrated hose drum 8 m hose; hose drum made of steel, with protective cover and outlet window, Q-C oel automatic spring return; ready for use, mounted in a horizontal position in the container 8 Mechanical roller flow meter, not calibratable, not for custody transfer, flow rate: PZ300 min. 20 l/min, max. 120 l/min, viscosity up to 500 cSt Special coating Coating for maritime operations (corrosion protection class C5M, medium)

901.-

99414 Upon request 99415 Upon 99416 request 98374

600.-

37347

393.-

99417

607.-

96359

147.-

99418

374.-

FUEL CONTAINERS FOR POWER UNITS AND HEATERS

RIETBERG CONTAINERS 2017

Ordinance on the transport of dangerous goods by road, rail, and inland waterways Ordinance on the transport of dangerous goods by maritime shipping

RIETBERG CONTAINERS 2017

FUEL CONTAINERS FOR POWER UNITS AND HEATERS

Approval and type testing Whether a container is approved packaging or an approved IBC can be identified clearly by its code.

Example for packaging coding of a Rietberg CONTY 250: UN 1A1 / 1 1

/ 250 / 15 / D / BAM 14373-rietberg

RIETBERG KRAFTSTOFFCONTAINER Art. Nr. 38378

2 3 4 5 6 7

Marking Packaging and IBCs are to be marked as follows according to ADR chapter 5.2: › The UN no. of the transported substance (e.g. diesel: UN 1202) › The mark for environmentally hazardous substances (fish and tree, black on white surface) › Hazard label (e.g. diesel: no. 3, flame, black or white on red surface) The specified markings have to be attached on two opposite sides of IBCs with a capacity of more than 450 litres and on one side of smaller packaging. Additionally, the containers are to be labelled with substance-related hazard warnings according to GHS. In addition to the container, we provide a set of adhesive labels for initial marking. Additionally, a pictogram on the ICB specifies whether the container is stackable or not. The following illustration is an example for marking of an IBC for diesel.

DOPPELWANDIGE AUSFÜHRUNG

XXXX kg max

www.rietberg-behaelter.de

UN 1202

Front view

1 2 3 4 5

1 2 3

Side view Example for IBC coding of a Rietberg QUADRO-C 1000: UN 31A / Y / 01.15 / D / BAM 13081-rietberg / 9800 / 1506 1 1 2 3 4 5 6 7 8

No.

Quantity

Type

UN 1202

Description

Transported substance diesel Hazard label

Environmentally hazardous substances

Safety information

not stackable

XXXX kg max

stackable (admissible stacking load is specified!)

PACKAGING AND IBCS

RIETBERG CONTAINERS 2017

FUEL CONTAINERS FOR POWER UNITS AND HEATERS

Transp. cat.

Petrol

Medium

333 litres

Max. capacity

Diesel

III

1,000 litres

RIETBERG CONTAINERS 2017

FUEL CONTAINERS FOR POWER UNITS AND HEATERS

TANK CONTAINER Type testing and approval Whether containers are approved tank containers can be clearly identiﬁed according to the approval number. For example: D

4 5

12345

Front view

5 6 7 8

6 7 8 30 1202

1 2 3

BAM

The following illustration is an example for marking of a KC-AG 5500 for diesel.

1 2 3 4

Tank for ﬂuids Calculation pressure: 4 bar Tank with top openings without openings under the ﬁlling level Air-tight tank

L4DH D/BAM/17 12345/TC

7 3

No.

Quantity

Type

30 1202

L4DH D/BAM/17 12345/TC

Description

Warning sign. 400 x 300 mm Approval number Hazard label. 250 x 250 mm

Environmentally hazardous substances. 250 x 250 mm

STORAGE CONTAINERS FOR SUPPLY AND DISPOSAL

RIETBERG CONTAINERS 2017

STORAGE CONTAINERS FOR SUPPLY AND DISPOSAL

04 STORAGE CONTAINERS FOR SUPPLY AND DISPOSAL

STORAGE CONTAINERS FOR SUPPLY AND DISPOSAL

RIETBERG CONTAINERS 2017

STORAGE CONTAINERS FOR SUPPLY AND DISPOSAL

MULTI-TANKS & STORAGE TANKS Depending on the safety objective, e.g. occupational safety, fire and explosion safety or environmental protection, there are regulations for set-up and operation of means of storage for hazardous substances. The regulations are included in various laws, regulations and technical rules that have to be fully observed. Rietberg storage containers have been particularly developed for above-ground collection and storage of all types of water-polluting fluids. They also comply with all regulations applicable for storage of non-flammable, fire-resistant and flammable, easily flammable and highly flammable fluids. Rietberg storage containers enable proper, safe and appropriate collection and storage. Rietberg storage containers feature a double-walled design and

are equipped with off-grid vacuum leakage indicator at both walls to also meet the requirements for installation in water protection areas. They offer low-maintenance and durable leakage monitoring without the need for any power connection. The containers are available in sizes for 400 to 16,000 litres and are suitable for indoor and outdoor installation. Thanks to the double-walled design, the collection space or tray otherwise specified is not required, eliminating the related maintenance costs. The standard models are hot-dip galvanised on the inside and outside according to DIN EN ISO 1461 (only cylindrical containers) for optimum corrosion protection. The tanks are also available with coating or in stainless steel to meet individual requirements of substances to be stored.

Their benefits 2

Double-walled › Both walls are made of steel, high durability, long service life 1 › Vacuum-tight welding › No additional costs for a collection tray 2

Vacuum leakage indicator › Permanent closed leakage monitoring system at both walls with approval for outdoor installation › Environmentally friendly, oﬀ-grid, durable

RIETBERG CONTAINERS 2017

STORAGE CONTAINERS FOR SUPPLY AND DISPOSAL

MULTI-TANK MT [FIRE-RESISTANT AND FLAMMABLE FLUIDS]

2.1

2 2

MT 2400 as diesel fuel system with R50 230 pump, discharge nozzle bracket, ﬁll limit indicator and ﬂow meter type PZ300

GENERAL TECHNICAL APPROVAL, DIBT, BERLIN

Z-38.12-41

Their benefits › German general technical approval as storage container for flammable and other water polluting fluids. For waste oils up to an operating temperature of 95 °C › Indoor and outdoor installation – also in flood areas (for the version, please refer to page 98) › Available as single-chamber container or with 2 or 3 chambers depending on the surface area › As an alternative to the standard height, the containers are also available in variable height for individual adjustment to in-site conditions › Compact and space-saving. Optimum space utilisation thanks to a cubic design › Double-walled design for installation of several tanks next to each other with minimum gaps › Full steel design for extreme durability and long service life › Individual equipment options offer practical solutions for individual requirements › Practically all types of conventional equipment including heavy pumps can be directly installed on the durable dome cover 4 › The containers are coated on the outside in RAL 7035, light grey. Other RAL colours are optionally available. Containers with a capacity of 900 and 1300 litres are also available hot-dip galvanised on the inside and outside › All containers are also available in stainless steel › If required, empty containers may also be transported internally by crane or pallet truck › Containers for fire-resistant fluids are: » approved for media with a flash point above 55 °C like fresh oil or diesel/fuel oil but also waste oil of known origin › Containers for flammable fluids are: » approved for media of all types like petrol or kerosene but also waste oil of unknown origin. These containers are also suitable for storage of fire-resistant fluids » Explosion blast proof and withstand even explosions on the inside

Technical characteristics › Double-walled permanent oﬀ-grid vacuum leakage monitoring at both walls 1 › Mechanical ﬁlling level indicator › Dome with a diameter of 500 mm 3 › Dome cover with 6 free 2" threaded sleeves 3

STORAGE CONTAINERS FOR SUPPLY AND DISPOSAL

RIETBERG CONTAINERS 2017

Available models STANDARD

Dimensions (mm) Type / content

Hot-dip galvanised

Weight (kg)

Approval

Coated RAL 7035 2.1

Art. no.

Price (€)

Art. no.

Price (€)

FIRE-RESISTANT FLUIDS

MT-se 900 MT-se 1300

1200

800

1290

200

Z-38.12-41

82810

2,322.-

82968

1,812.-

1200

800

1750

260

Z-38.12-41

81014

2,557.-

89850

2,011.-

MT-se 2000

1800

800

1750

370

Z-38.12-41

–

89852

2,576.-

MT-se 2400

2200

800

1750

420

Z-38.12-41

–

89853

3,183.-

1200

800

1290

240

Z-38.12-41

84843

3,022.-

81545

2,576.-

MT-elh 1300

1200

800

1750

300

Z-38.12-41

84844

3,182.-

81550

2,794.-

MT-elh 2000

1800

800

1750

410

Z-38.12-41

–

84892

3,354.-

MT-elh 2400

2200

800

1750

460

Z-38.12-41

–

84893

3,967.-

FLAMMABLE FLUIDS

MT-elh 900

SURFACE MODELS Surface designation

Inner wall

Outer wall

2 hot-dip galvanised

Coated

hot-dip galvanised

2.1 Raw

Coated

Coated stainless steel

stainless steel

Coated

Hot-dip galvanised with additional coating stainless steel

hot-dip galvanised

hot-dip galvanised and coated

stainless steel

Hot-dip galvanised

For adjustment to structural conditions like the utilization of recesses, multi-tanks are available with a variable jacket height between 530 and 1500 mm. With a constant surface area, the total height and the capacity of the container are adjusted. The container height up to the upper base is deﬁned by the jacket height +100 mm and the total container height (leakage indicator top edge) by the jacket height +260 mm. For information on the capacity, please refer to the following table.

Mantelhöhe min. 530 mm

Mantelhöhe max. 1500 mm

MULTI-TANK WITH VARIABLE HEIGHT

Dimensions (mm) Type / content

Hot-dip galvanised

Capacity/100 mm Jacket height (litres)

Approval

Coated in RAL 7035

Art. no.

Price (€)

Art. no.

Price (€)

FIRE-RESISTANT FLUIDS

MT-se 1300-vh

1200

800

Z-38.12-41

71304

2,901.-

83980

2,381.-

MT-se 2000-vh

1800

800

140

Z-38.12-41

–

83981

3,009.-

MT-se 2400-vh

2200

800

170

Z-38.12-41

–

83982

3,688.-

MT-elh 1300-vh

1200

800

Z-38.12-41

3,503.-

73874

3,079.-

MT-elh 2000-vh

1800

800

140

Z-38.12-41

–

96598

3,680.-

MT-elh 2400-vh

2200

800

170

Z-38.12-41

–

77318

4,335.-

FLAMMABLE FLUIDS

71706

STORAGE CONTAINERS FOR SUPPLY AND DISPOSAL

RIETBERG CONTAINERS 2017

MULTI-TANK FOR FLOOD AREAS

Multi-tanks may also be installed in flood areas. For this purpose, the containers are equipped with a dipstick instead of a filling level indicator. Especially approved and certified anchor elements are used to secure the containers against the lifting forces in case of flooding. This way, installation is possible up to flooding of 3.0 m above floor level.

Dimensions (mm) Type / content

Hot-dip galvanised Coated in RAL 7035

Weight (kg)

Approval

Art. no.

Price (€)

Art. no.

Price (€)

FIRE-RESISTANT FLUIDS

MT-Ü 900

1200

800

1290

200

Z-38.12-41

96596

2,567.-

72543

2,088.-

MT-Ü 1300

1200

800

1750

260

Z-38.12-41

96597

2,805.-

72544

2,295.-

MT-Ü 2000

1800

800

1750

370

Z-38.12-41

–

72546

2,874.-

MT-Ü 2400

2200

800

1750

420

Z-38.12-41

–

72547

3,501.-

ACCESSORIES

Anchoring element

Basic unit for the ﬁrst container

72516

136.-

72516

136.-

Extension for each additional container

72588

119.-

72588

119.-

MULTI-CHAMBER MULTI-TANK

Multi-tanks with multiple chambers are the perfect solution for storage of diﬀerent ﬂuids in restricted spaces. Depending on the surface area of the container, models with 2 or 3 chambers are available. Each chamber is equipped with a separate dome and respective connection options. The containers feature a standard single-walled partitions. Double-walled partitions are available on request.

Dimensions (mm) Type / content

Weight (kg)

Coated in RAL 7035 Approval

Art. no.

Price (€)

FIRE-RESISTANT FLUIDS

MT 1300-2K

2-chamber multi-tank

1200

800

1750

320

Z-38.12-41

73344

2,953.-

MT 2000-2K

2-chamber multi-tank

1800

800

1750

430

Z-38.12-41

73346

3,572.-

MT 2400-2K

2-chamber multi-tank

2200

800

1750

500

Z-38.12-41

73347

4,108.-

MT 2400-3K

3-chamber multi-tank

2200

800

1750

520

Z-38.12-41

73348

4,843.-

ACCESSORIES

Double-walled partition

600 mm

2-chamber partition MT 1300

A double-walled partition oﬀers additional safety

≥ 700 mm

2-chamber partition MT 2000 – MT 2400

–

≥ 700 mm

3-chamber partition MT 2400

97.-

≥ 700 mm

STORAGE CONTAINERS FOR SUPPLY AND DISPOSAL

RIETBERG CONTAINERS 2017

Additional accessories

Special coating Fitting set for diesel fuel Fitting sets for fresh goods

Fitting set for waste goods Fitting set for gasoline

Pressure sensor - se (ﬁre-resistant) Pressure sensor - elh (ﬂammable)

Approval

Art. no.

Special base construction designed for in-house transport of the filled tank with forklift trucks Coating for outdoor installation (corrosion protection class C3) or in different RAL colours Consisting of a filler line with lockable MS screw fitting, suction line with pump port (SAE flange) and base filter, fill limit indicator, ventilation nozzle with ventilation cap Filler line with 2" external thread port for line connection, 2" ventilation nozzle with cap Filler line with 2/2 ½ MS screw fitting, 2" ventilation nozzle with cap

–

401.-

–

194.-

84074

285.-

82973

102.-

84020

162.-

Filler line with 2/2 ½ MS screw ﬁtting, 2" ventilation nozzle with cap, suction line 4

75700

182.-

with 1" external thread for line connection Filler line with 2" external thread port, suction line with 2" external thread port

82974

102.-

81779

182.-

84075

471.-

76099

471.-

79195

275.-

76539

875.-

Filler line with 2" external thread port, 2" ventilation nozzle with cap, suction line 3 with 2/2 ½ MS screw fitting For MT 900: Filler line with MS screw fitting, suction line with pump port (SAE flange) and base filter, fill limit indicator, ventilation nozzle with ventilation cap, gas balance port For MT 1300 – 2400: Filler line with MS screw fitting, suction line with pump port (SAE flange) and base filter, fill limit indicator, ventilation nozzle with ventilation cap, gas balance port Pressure sensor for remote monitoring of the leakage indicator Pressure sensor for remote monitoring of the leakage indicator with ATEX approval

Price (€)

For additional equipment such as overﬁll protection, please refer to page 107 50 mm

50 mm

Thanks to the double-walled design with vacuum leakage indicator, Rietberg MT multi-tanks may be installed with minimum clearance, e.g. in recesses.

50 mm

Mindestens 400 mm

Type / content

MT mobile

STORAGE CONTAINERS FOR SUPPLY AND DISPOSAL

RIETBERG CONTAINERS 2017

STORAGE TANK LT-SE (FIRE-RESISTANT FLUIDS) Their benefits › Manufactured according to DIN 6624/6616 with German approval for storage of fire-resistant fluids (flash point above 55 °C) and other water-polluting fluids › Installation in buildings and outdoors › Double-walled design for installation of several tanks next to each other without any gaps › No storage space for collection of fluids is required › Full steel design for extreme durability and long service life › The containers are hot-dip galvanised on the inside and outside for optimum protection against corrosion; different models available › Individual equipment options offer practical solutions for individual requirements › Practically all types of conventional equipment including heavy pumps can be directly installed on the durable dome cover 2 › 4 stable container stands ensure secure positioning

Technical characteristics › Double-walled permanent oﬀ-grid vacuum leakage monitoring at both walls 1 › Dome with a diameter of 500 mm 2 › Dome cover 2 with: » Dipstick » Ventilation line » 5 free threaded sleeves (1 x 1" , 4 x 2") 1

RIETBERGWERKE GMBH & CO. KG

DIN 6624

STORAGE CONTAINERS FOR SUPPLY AND DISPOSAL

RIETBERG CONTAINERS 2017

Available models Dimensions (mm) Type / content

Hot-dip galvanised

Weight (kg)

Approval

Art. no.

Price (€)

LT-se 1500

2100

1000

1360

470

DIN 6624

98085

2,692.-

LT-se 2000

2800

1000

1360

560

DIN 6624

98086

3,096.-

LT-se 2900

2100

1400

1800

630

07-PÜZ8104581324

98087

4,348.-

LT-se 3000-100

4050

1000

1400

720

DIN 6624

98088

3,888.-

LT-se 3000-125

2750

1250

1610

720

DIN 6624

98089

3,888.-

LT-se 3500

3100

1250

1610

730

DIN 6624

98090

4,087.-

LT-se 5000-125

4350

1250

1610

960

DIN 6624

98091

4,928.-

LT-se 5000-140

3660

1400

1760

960

07-PÜZ8104581324

98092

5,528.-

LT-se 5000-160

2690

1600

2100

1200

07-PÜZ8105638697

98751

6,220.-

LT-se 7500-140

5240

1400

1760

1750

07-PÜZ8105638697

98093

7,014.-

LT-se 7500-160

4100

1600

2100

1580

07-PÜZ8105638697

98752

7,418.-

LT-se 10000-140

6800

1400

1760

2100

07-PÜZ8105638697

98094

8,057.-

LT-se 10000-160

5350

1600

2100

1930

07-PÜZ8105638697

98753

8,739.-

LT-se 13000

6960

1600

2100

2480

07-PÜZ8105638697

98754 10,950.-

LT-se 16000

8600

1600

2100

2940

07-PÜZ8105638697

98755 12,759.-

Accessories Type

Fitting set Supply Fitting set Disposal DOM III Pressure sensor - se (ﬁre-resistant)

Description

Filler line with 2"/2½ MS safety screw fitting, suction line with port 1" external thread 4 Filler line with 2" internal thread port, extraction line with MS safety screw fitting 2"/2½" 5 Cleaning dome for fire-resistant fluid containers, 500 mm diameter, plain dome cover screw-connected to the dome flange Pressure sensor for remote monitoring of the leakage indicator 3

For additional equipment such as overﬁll protection, please refer to page 107

Art. no.

Price (€)

98096

155.-

98097

155.-

88942

469.-

79195

275.-

100

STORAGE CONTAINERS FOR SUPPLY AND DISPOSAL

RIETBERG CONTAINERS 2017

STORAGE TANK LT-ELH [FLAMMABLE FLUIDS]

2 3

Their benefits › Manufactured according to DIN 6623 with German approval for storage of all types of flammable fluids and other water-polluting fluids › The containers are explosion blast proof, thus withstand even explosions on the inside and may therefore be operated without flame arresters › Installation in buildings and outdoors › Double-walled design for installation of several tanks next to each other without any gaps › No storage space for collection of fluids is required › Full steel design for extreme durability and long service life › The containers are hot-dip galvanised on the inside and outside for optimum protection against corrosion; different models available › Individual equipment options offer practical solutions for individual requirements › Practically all types of conventional equipment including heavy pumps can be directly installed on the container › Base ring with recesses for forklift or pallet truck application. This way, empty containers may be easily transported

Technical characteristics › Double-walled permanent oﬀ-grid vacuum leakage monitoring at both walls 1 › Explosion blast proof › 2 lifting brackets for empty transport, safe crane lifting acc. to BGI 556 5

LT-ELH MODEL 2 4

› Dome with a diameter of 500 mm › Dome cover with: » Dipstick » Ventilation line » 5 free threaded sleeves (1 x 1½", 4 x 2") LT-B-ELH MODEL 3 5

RIETBERGWERKE GMBH & CO. KG

DIN 6623

› All ports are ﬁtted in the upper base of the container: » Inspection opening with a diameter of 120 mm and blind cover » Dipstick » Ventilation line » 1 free pipe socket, 2" external thread port » 2 free threaded sleeves (1 x 1" , 1 x 2")

STORAGE CONTAINERS FOR SUPPLY AND DISPOSAL

RIETBERG CONTAINERS 2017

101

Available models Dimensions (mm) Type / content

hot-dip galvanised

Weight (kg)

Approval

Art. no.

Price (€)

1100

220

DIN 6623

98657

3,539.-

1000

1360

260

DIN 6623

98658

3,610.-

1250

1450

310

DIN 6623

98659

3,723.-

1000

1100

220

DIN 6623

71343

2,253.-

1000

1360

260

DIN 6623

71344

2,366.-

1250

1450

310

DIN 6623

71345

2,657.-

1000

1000 1250

LT-ELH MODEL

LT-elh 400 LT-elh 600 LT-elh 995

LT-B-ELH MODEL

LT-B-elh 400 LT-B-elh 600 LT-B-elh 995

Type

DOM III

Description 7

Additional sleeve 2" I Additional sleeve 2" II LT mobile

Supply fitting set for LT-elh Disposal fitting set for LT-elh Supply fitting set for LT-B-elh Disposal fitting set for LT-B-elh

9 10 11 12

Art. no.

Price (€)

Cleaning dome for flammable fluid containers, 400 mm diameter, domed folding cover secured with 4 eye screws For LT storage containers. For overfill protection installation

85996

1,375.-

83674

74.-

For LT storage containers. With filler line for filling via an additional fixed line.

83673

92.-

–

401.-

98661

155.-

98660

155.-

98853

155.-

98854

155.-

Durable base construction designed for in-house transport of the filled container with forklift equipment. Filler line with 2/2½“ MS safety screw fitting, suction line with port 1“ external thread Filler line with 2" external thread port, suction line with MS safety screw fitting 2/2½“ Filler line with 2/2½“ MS safety screw fitting, suction line with port 1“ external thread Filler line with 2" external thread port, suction line with MS safety screw fitting 2/2½“

For additional equipment like overfill protection, please refer to page 107.

Accessories

102

STORAGE CONTAINERS FOR SUPPLY AND DISPOSAL

RIETBERG CONTAINERS 2017

STORAGE TANK LT-ELH [FLAMMABLE FLUIDS]

3 2

GENERAL TECHNICAL APPROVAL, DIBT, BERLIN

Z-38.12-51

Their benefits › German general technical approval as storage container for flammable fluids of all types and other water polluting fluids › The containers are explosion blast proof and withstand even explosions on the inside › Installation in buildings and outdoors › Double-walled design for installation of several tanks next to each other without any gaps › No storage space for collection of fluids is required › Full steel design for extreme durability and long service life › The containers are hot-dip galvanised on the inside and outside for optimum protection against corrosion; different models available › Individual equipment options offer practical solutions for individual requirements › Practically all types of conventional equipment including heavy pumps can be directly installed on the durable dome cover › Extremely durable base construction connected with the container cylinder via ridge plates

Technical characteristics › Double-walled permanent oﬀ-grid vacuum leakage monitoring at both walls 1 › Explosion blast proof › Dome with a diameter of 500 mm 3 › Dome cover 3 with: » Dipstick » Ventilation line » 5 free threaded sleeves (1 x 1½", 4 x 2") › Lifting brackets for empty transport, safe crane lifting acc. to BGI 556

STORAGE CONTAINERS FOR SUPPLY AND DISPOSAL

RIETBERG CONTAINERS 2017

103

Available models Dimensions (mm) Type / content

hot-dip galvanised

Weight (kg)

Approval

Art. no.

Price (€)

Z-38.12-51

98651

4,220.-

Z-38.12-51

98652

5,497.-

Z-38.12-51

98653

5,843.-

Z-38.12-51

98654

5,843.-

LT-elh 1000

1400

1000

1400

350

LT-elh 1500

2100

1000

1400

550

LT-elh 2000-100

2850

1000

1400

600

LT-elh 2000-125

1950

1250

1650

530

LT-elh 2900

2100

1400

1800

680

Z-38.12-51

98656

6,311.-

LT-elh 3000-100

4050

1000

1400

850

Z-38.12-51

98643

6,415.-

LT-elh 3000-125

2650

1250

1650

750

Z-38.12-51

98644

6,415.-

LT-elh 3500

3100

1250

1650

950

Z-38.12-51

98645

6,896.-

4400

1250

1650

1100

Z-38.12-51

98646

8,723.-

LT-elh 5000-140

3650

1400

1800

1250

Z-38.12-51

98647

8,723.-

LT-elh 6250

4460

1400

1800

1375

Z-38.12-51

98648

9,554.-

LT-elh 7500

5240

1400

1800

1550

Z-38.12-51

98649 10,380.-

LT-elh 8750

6020

1400

1800

1675

Z-38.12-51

98650 10,654.-

LT-elh 10000

6800

1400

1800

Z-38.12-51

98642 10,928.-

LT-elh 5000-125

Type

DOM I Ventilation hood Flame arrester Fitting set Supply for LT-elh Fitting set Disposal for LT-elh

Description

Cleaning dome for flammable fluid containers, 500 mm diameter, plain dome cover screw-connected to the dome flange Explosion blast proof. For protection of the ventilation line of storage containers for flammable fluids with a capacity of more than 1,000 litres Protection of the filler line of storage containers for flammable fluids with a capacity of more than 1,000 litres 5 Filler line with 2/2½" MS safety screw fitting and suction line with 1" external thread port 6 Filler line with 2" external thread port and suction line with 2/2½" MS safety screw fitting 4

Art. no.

Price (€)

85995

900.-

39186

628.-

98358

838.-

98661

155.-

98660

155.-

For additional equipment like overfill protection, please refer to page 107.

Accessories

104

STORAGE CONTAINERS FOR SUPPLY AND DISPOSAL

RIETBERG CONTAINERS 2017

Example for EX zone classification

OPTION I: Zone 0: Zone 0 is the interior of a storage container including feed and ventilation lines. In this area, dangerous explosive atmospheres occur permanently or frequently. Zone 1: In this area in the vicinity of openings, dangerous explosive atmospheres may occur occasionally during operation.

OPTION II:

IP 54 control cabinet Control cabinet with EEx-d housing Ventilation line

Zone 2: In this area at a larger distance to a container, dangerous explosive atmospheres do not occur or only temporarily.

No EX zone: No flammable vapour/air mixtures

STORAGE CONTAINERS FOR SUPPLY AND DISPOSAL

RIETBERG CONTAINERS 2017

105

OVERFILL PROTECTION If containers are filled in such a way that the filling level cannot be identified (i.e. via a fixed line), it has to be ensured that the container cannot be overfilled. Overfill protection generally includes the following two components: › Level sensor permanently mounted in the container with a PTC thermistor changing its electrical resistance on reaching the admissible filling level › Transducer generating an optical and acoustic signal from this change in resistance and via which the filling process can also be stopped For type-specific differences, please refer to the following table.

Scope of delivery: Level sensor, transducer, mounted at ordered Rietberg container

Type

Description

Art. no.

Price (€)

FIRE-RESISTANT FLUIDS

AIII-K

1 Control cabinet, protection type IP 54, with panel-mounted transducer at the

31195

1,715.-

AIII-K-40

container. Fully connected 2 Transducer, protection type IP 40, with simple bracket mounted at the container. Fully connected

86286

891.-

31303

2,364.-

85974

4,273.-

85998

2,503.-

55958

748.-

FLAMMABLE FLUIDS

AI-K AI-ex-K AI-Cont.

IP 54 control cabinet with transducer for mounting outside of the EX zone of the container. Connection between level sensor and control cabinet on-site Control cabinet with EEx-d housing with transducer, completely panel-mounted on the container and fully connected IP 54 control cabinet with transducer for mounting outside of the Ex-zone of the container, 10 m cable with plug connector for connection of a level sensor; the level sensor is separately enclosed; for on-site mounting in a mobile container Level sensor, 500 mm long, separate

106

STORAGE CONTAINERS FOR SUPPLY AND DISPOSAL

RIETBERG CONTAINERS 2017

STORAGE CONTAINERS FOR SUPPLY AND DISPOSAL

107

LEGAL REQUIREMENTS FOR STORAGE CONTAINERS The requirements for installation of storage containers for water-polluting, non-flammable substances, fire-resistant (formerly technical rules for flammable fluids TRbF AIII) and flammable fluids are defined for Germany in the ordinance on industrial safety and health (BetrSichV) of the technical rules for operating safety (TRBS) and the ordinance on installations for the handling of substances hazardous to water (VAwS). The Vd-TÜV datasheet 967 for fuel systems is regarded as the state of the art and is to be observed. Building and fire protection regulations may also be applicable.

According to the German ordinance on installations for the handling of substances hazardous to water (VAwS) VAwS for North Rhine-Westphalia speciﬁes a reporting requirement for above-ground systems as of hazard level B (may deviate in other states). The hazard level is deﬁned by the water hazard class of the storage medium and the storage capacity (table of VAwS).

Capacity (m3)

Weight (t)

Water hazard class 1

< 0,22

< 0,2

Level A

≤1

Level A

Level B

≤ 10

Level A

Level B

Level C

> 10

≤ 100

Level A

Level C

Level D

> 100

≤ 1,000

Level B

Level D

> 1,000

Level C

Level D

General installation requirements According to VAwS, systems have to prevent leakage of waterpolluting substances. Systems have to be tight, stable and sufficiently resistant against mechanical, thermal and chemical loads to be expected. Any leakage has to be identified quickly and reliably and leaking substances have to be retained. Operating-related occurring drip losses must be collected. The systems have to be installed on a suitably firm surface. A collision buffer is to be provided as necessary. For double-walled containers, no collection trays are required. Otherwise, the following applies: Mixtures potentially containing water-polluting substances leaking in case of damage have to be retained. The collection capacity of the storage space has to correspond to the maximum volume of the substances that may leak in case of malfunctions.

Installation For systems with fire-resistant fluids, no clearances to buildings are required. For systems with flammable fluids, a clearance of 10 m to buildings has to be observed if these are not sufficiently protected against fire (F90 according to DIN 4102). In case of indoor installation, walls, ceilings and doors have to consist of non-flammable materials. Between storage spaces and neighbouring rooms, fire-resistant (F90 according to DIN 4102) partitions are required. Ventilation has to permanently ensure at least 5-fold air exchange. Inspection In North Rhine-Westphalia in Germany, systems of hazard level B outside of water protection areas and all systems in water protection areas require inspection prior to commissioning. Systems for fire-resistant fluids with a capacity of 10 m³ do not need inspection if they are installed by a qualified company with respective certification. Systems for fire-resistant fluids with a capacity of up to 10,000 litres do not require repeated inspection (1 m³ in water protection areas, 5 m³ for fuel oil). Systems for flammable fluids and a capacity of more than 10 m³ (content of all containers) require inspection by a qualified professional in intervals of five years. Local authorities may specify further requirements. In other states, the regulations may deviate. Operation Storage containers may only be filled via a fixed pipeline connection with overfill protection. (Containers with a capacity of up to 1,000 litres are an exception and may also be filled via an automatically closing discharge nozzle). Rietberg collection containers with filling funnel may be intermittently filled with low volumes without overfill protection. Operating-related occurring drip losses must be collected. Obligations of the operator As of a system capacity of more than 1 m³, the operator is required to prepare a system description with monitoring, servicing and alarm schemes for definition of operating instructions specifying all measures required for operation. Rietberg containers do not require maintenance. However, containers and equipment have to be regularly checked for potential damage. The system may only be operated in proper condition. The leakage indicator and potential overfill protection require inspection according to the operating instructions.

Approval According to Germany ordinance on industrial safety and health (BetrSichV) According to the BetrSichV, storage of fluids with a flash point above 55 °C does not require any approval. According to the BetrSichV, an approval is required for storage of more than 450 litres of flammable liquids. Installations for storage of flammable liquids with a total capacity of more than 10,000 litres require monitoring.

108

COLLECTION CONTAINERS FOR DISPOSAL

RIETBERG CONTAINERS 2017

COLLECTION CONTAINERS FOR DISPOSAL

109

05 COLLECTION CONTAINERS FOR DISPOSAL

110

COLLECTION CONTAINERS FOR DISPOSAL

RIETBERG CONTAINERS 2017

MULTI-COLLECTORS, WASTE OIL COLLECTORS, HAZARDOUS SUBSTANCE DEPOT AND HAZARDOUS SUBSTANCE COLLECTOR For safe collection and storage of hazardous substances, containers with appropriate safety functions for effective prevention of emission of these substances are indispensable. During a single working day, considerable volumes of waste fluids may accrue that require practical collection and storage in compliance with regulations. Rietberg storage containers have been particularly developed for above-ground collection and storage of all types of waterpolluting fluids. Depending on the type/version, they comply with all regulations applicable for storage of non-flammable, fire resistant and flammable, easily flammable and highly flammable fluids. Rietberg storage containers enable proper, safe and appropriate collection and storage. Rietberg collection containers feature a double-walled design and are equipped with off-grid vacuum leakage indicator at both walls to also meet the requirements for water protection areas. They offer low-maintenance and durable leakage monitoring without the need for any power connection. The containers are

available in sizes for 250 to 10,000 litres and are suitable for indoor and outdoor installation. Thanks to the double-walled design, the collection space or tray otherwise specified is not required, eliminating the related maintenance costs. The standard models are hot-dip galvanised on the inside and outside according to DIN EN ISO 1461 for optimum corrosion protection. The tanks are also available with coating or in stainless steel to meet individual requirements of substances to be stored. Rietberg collection containers are also available as "mobile" models. These models are specially equipped for in-house transport by forklift truck. This way, the collection tank can be easily positioned where substances to be collected occur. This reduces the risk of spilling of hazardous fluids due to incorrect in-house transport. We also design special systems according to individual demands. We are sure that we can also find the optimum solution for your requirements.

COLLECTION CONTAINERS FOR DISPOSAL

RIETBERG CONTAINERS 2017

111

WASTE OIL COLLECTORS AS-T-SE [FIRE-RESISTANT FLUIDS]

Their benefits › Manufactured according to DIN 6623 with German approval for storage of fire-resistant fluids, i.e. media with a flash point above 55 °C like waste oil of known origin or diesel/fuel oil and other water-polluting fluids of all water hazard classes › Filling via Ø 500 filling funnel with manually operated cover › Installation in buildings and outdoors › Double-walled design for installation of several tanks next to each other without any gaps and without storage space for collection › Full steel design for extreme durability and long service life › The containers are hot-dip galvanised on the inside and outside for optimum protection against corrosion › All containers are also available in stainless steel › If required, empty containers may also be transported by forklift truck, pallet truck or crane

Technical characteristics › Hot-dip galvanised on the inside and outside › Double-walled permanent off-grid vacuum leakage monitoring at both walls 1 › Dipstick › Ventilation line › Drain line with safety screw fitting › Filling funnel, Ø 500 mm, with cover 3 › Hydraulic overfill protection › Base construction designed for occasional in-house transport with forklift trucks when empty › 2 lifting brackets, safe crane lifting acc. to BGI 556 › Operation by qualified professionals

RIETBERGWERKE GMBH & CO. KG

DIN 6623

Available models Dimensions (mm) Type / content

AS-T-se 400 AS-T-se 990

1000

1250

1335

Hot-dip galvanised

Weight (kg)

Approval

Art. no.

Price (€)

155

DIN 6623

72573

1,838.-

235

DIN 6623

72647

1,993.-

Art. no.

Price (€)

Accessories Type

Description

Additional sleeve 2" I

For collection containers type AS / GS / GD; for overﬁll protection installation

83674

74.-

Additional sleeve 2" II

For collection containers type AS / GS / GD; with filler line for filling via an additional fixed line Durable base construction designed for in-house transport of the filled container with forklift equipment

83673

92.-

–

401.-

AS mobile

112

COLLECTION CONTAINERS FOR DISPOSAL

RIETBERG CONTAINERS 2017

WASTE OIL COLLECTORS AS-TP-SE [FIRE-RESISTANT FLUIDS] 2

RIETBERGWERKE GMBH & CO. KG

DIN 6624

Their benefits › Manufactured according to DIN 6624/6616 with German approval for storage of fire-resistant fluids, i.e. media with a flash point above 55 °C like waste oil of known origin or diesel/fuel oil and other water-polluting fluids of all water hazard classes › Filling via Ø 400 filling funnel with cover to be operated by foot pedal and Bowden cable › Complete including control platform with grated tread surfaces; for containers as of Ø 1400 mm with railing › Installation in buildings and outdoors › Double-walled design for installation of several tanks next to each other without any gaps and without storage space for collection › Full steel design for extreme durability and long service life › The containers are hot-dip galvanised on the inside and outside for optimum protection against corrosion › If required, empty containers may also be transported by crane

Technical characteristics › Hot-dip galvanised on the inside and outside › Double-walled permanent off-grid vacuum leakage monitoring at both walls 1 › Filling funnel with coarse screen insert, 400 mm diameter, approx. 30 litres capacity 3 › Foot pedal for operation of the funnel cover › Hydraulic overfill protection › Ventilation line 6 › Dipstick 4 › Extraction line 5 with lockable safety screw fitting › 1 reserve sleeve 2" › Lifting brackets for empty transport, safe crane lifting acc. to BGI 556 › Operation by qualified professionals

COLLECTION CONTAINERS FOR DISPOSAL

RIETBERG CONTAINERS 2017

113

Available models Dimensions (mm) Type / content

AS-TP-se 1500

3110

AS-TP-se 2000 AS-TP-se 2900 AS-TP-se 3000-100 AS-TP-se 3000-125

Hot-dip galvanised

Weight (kg)

Approval

Art. no.

Price (€)

470

DIN 6624

71335

4,217.-

1000

1385

3850

1000

1360

560

DIN 6624

71336

4,648.-

3350

1400

1850

800

07-PÜZ8104581324

77445

6,414.-

5060

1000

1360

720

DIN 6624

71337

5,492.-

3890

1250

1610

720

DIN 6624

71303

5,492.-

AS-TP-se 3500

4300

1250

1610

730

DIN 6624

71338

5,738.-

AS-TP-se 5000-125

5610

1250

1610

960

DIN 6624

71339

6,635.-

AS-TP-se 5000-140

5300

1400

1760

960

07-PÜZ8104581324

73498

7,649.-

AS-TP-se 7500

6715

1400

1760

1750

07-PÜZ8105638697

79174 10,106.-

AS-TP-se 10000

8265

1400

1760

2100

07-PÜZ8105638697

79175 11,295.-

Accessories

Additional sleeve 2" I Additional sleeve 2" II Without foot pedal Without control platform

Description

Art. no.

Price (€)

83674 83673

74.92.-

83675 77468

310.305.-

Price reduction, container diameter of 1250 mm

77469

342.-

Price reduction, container diameter of 1400 mm

77470

707.-

For collection containers type AS / GS / GD; for overfill protection installation For collection containers type AS / GS / GD; with filler line for filling via an additional fixed line Price reduction Price reduction, container diameter of 1000 mm

Waste oil collector installation The illustrated waste oil storage facility was installed at a recognised manufacturer of deep-draw components. It was particularly important that the containers can easily be filled. Additionally, the filling level was to be safely monitored for timely discharge of waste fluids at the manufacturing machinery. The system consists of four containers with a capacity of 5,000 litres each. They are filled via funnels that are easily accessible via a central control platform. Additionally, extraction units used in the facility can be directly connected to the tanks via dry couplings and convey into the tanks. This enables quick and clean draining of extraction units. The filling level is monitored via hydrostatic probes. The filling levels are displayed on indicators on a control panel. If the programmed level is reached, a notification is sent by text message. This way, disposal companies can be notified in time and draining of the containers can be arranged.

Type

114

COLLECTION CONTAINERS FOR DISPOSAL

RIETBERG CONTAINERS 2017

MULTI-COLLECTORS MS-T-SE [FIRE-RESISTANT FLUIDS]

GENERAL TECHNICAL APPROVAL, DIBT, BERLIN

Z-38.12-41

Their benefits › German general technical approval as storage container for fire-resistant fluids, i.e. media with a flash point above 55 °C, like waste oil of known origin or diesel/fuel oil and other water-polluting fluids of all water hazard classes For waste oil up to an operating temperature of 95 °C › Filling via a filling funnel with a diameter of 400 mm and manually operated cover › Installation in buildings and outdoors › As an alternative to the standard height, the containers are also available in variable height for individual adjustment to in-site conditions › Compact and space-saving, optimum space utilisation thanks to a cubic design › Double-walled design for installation of several tanks next to each other without any gaps and without storage space for collection › Full steel design for extreme durability and long service life › The containers are coated on the outside in RAL 7035 4 , light grey, for indoor installation. Other RAL colours are optionally available › Containers with a capacity of 900 and 1,300 litres are also available hot-dip galvanised on the inside and outside › All containers are also available in stainless steel › If required, empty containers may also be transported by forklift truck, pallet truck or crane

Technical characteristics › hot-dip galvanised on the inside and outside 2 or raw inside and coated outside 4 › Double-walled permanent off-grid vacuum leakage monitoring at both walls 1 › Filling funnel with coarse screen insert, 400 mm diameter, approx. 30 litres capacity 5 › Hydraulic overfill protection › Ventilation line › Dipstick › Extraction line with lockable safety screw fitting › 2 lifting brackets for empty transport, safe crane lifting acc. to BGI 556 › Operation by qualified professionals

COLLECTION CONTAINERS FOR DISPOSAL

RIETBERG CONTAINERS 2017

115

Available models STANDARD Dimensions (mm) Type / content

MS-T-se 900 MS-T-se 1300

1200 2

MS-T-se 2000 MS-T-se 2400

800

Hot-dip galvanised Coated in RAL 7035

Weight (kg)

1330

220

Approval

Art. no.

Price (€)

Art. no.

Price (€)

Z-38.12-41

84845

3,063.-

83324

2,444.-

1200

800

1780

260

Z-38.12-41

84729

3,305.-

83323

2,662.-

1800

800

1780

370

Z-38.12-41

–

83671

3,307.-

2200

800

1780

420

Z-38.12-41

–

83672

3,811.-

For adjustment to structural conditions like the utilization of recesses, multi-collectors are available with a variable jacket height between 530 mm and 1500 mm. With a constant surface area, the total height and the capacity of the container are adjusted. The container height up to the upper base is deﬁned by the jacket height +100 mm and the total container height (closed funnel cover top edge) by the jacket height +350 mm. For information on the capacity, please refer to the following table. With the funnel, the actual usable capacity is reduced by approximately 100 to 150 litres.

min. 530 mm

max. 1500 mm

MULTI-COLLECTOR WITH VARIABLE HEIGHT

Dimensions (mm) Type / content

Capacity/100 mm jacket height (litres)

Hot-dip galvanised Coated in RAL 7035 Approval

1200

800

Z-38.12-41

MS-T-se 2000-vh

1800

800

140

Z-38.12-41

MS-T-se 2400-vh

2200

800

170

Z-38.12-41

Art. no.

Price (€)

Art. no.

Price (€)

71329

3,850.-

71324

2,922.-

–

71326

3,589.-

–

71327

4,111.-

Art. no.

Price (€)

72125

148.-

84964

394.-

–

401.-

–

194.-

MS-T-se 1300-vh

Accessories Type

Control platform I Control platform II MS mobile Special coating

Description

One-step control platform for MS 900, full steel design, hot-dip galvanised Dimensions (L x W x H): 600 x 500 x 275 mm Three-step control platform suitable for MS 1300 – 2400, full steel design, hot-dip galvanised; dimensions (L x W x H): 1270 x 810 x 600 mm Durable base construction designed for in-house transport of the ﬁlled container with forklift equipment Coating for outdoor installation (corrosion protection class C3) or in diﬀerent RAL colours

For additional equipment like overfill protection, please refer to pages 127 – 129.

116

COLLECTION CONTAINERS FOR DISPOSAL

RIETBERG CONTAINERS 2017

MULTI-COLLECTORS MS-TP-ELH [FLAMMABLE FLUIDS]

GENERAL TECHNICAL APPROVAL, DIBT, BERLIN

Z-38.12-41

Their benefits › German general technical approval as storage container for all types of flammable fluids, like waste oil of unknown origin and petrol or kerosene as well as other water-polluting fluids of all water hazard classes For waste oil up to an operating temperature of 95 °C › The containers are explosion blast proof and withstand even explosions on the inside › Filling via a filling funnel with a diameter of 400 mm, manually operated shut-off ball valve and self-locking cover operated via foot pedal › Installation in buildings and outdoors › Compact and space-saving. Optimum space utilisation thanks to a cubic design › Double-walled design for installation of several tanks next to each other without any gaps and without storage space for collection › Full steel design for extreme durability and long service life › The containers are coated on the outside in RAL 7035, light grey, for indoor installation. Other RAL colours are optionally available › Containers with a capacity of 900 and 1,300 litres are also available hot-dip galvanised on the inside and outside › If required, empty containers may also be transported by forklift truck, pallet truck or crane

Technical characteristics › Hot-dip galvanised on the inside and outside or raw inside and hot-dip galvanised outside › Double-walled permanent off-grid vacuum leakage monitoring at both walls 1 › Dome with a diameter of 500 mm › Hot-dip galvanised filling funnel with coarse screen insert, diameter 400 mm, approx. 30 litres capacity 4 › Manual shut-off ball valve in the filler line under the funnel 4 › Hydraulic overfill protection › Ventilation line › Dipstick › Extraction line with lockable safety screw fitting › 1 reserve sleeve 2" › 2 lifting brackets for empty transport, safe crane lifting acc. to BGI 556 › Dipstick › Operation by qualified professionals

COLLECTION CONTAINERS FOR DISPOSAL

RIETBERG CONTAINERS 2017

117

Available models Dimensions (mm) Type / content

Weight (kg)

Hot-dip galvanised Coated in RAL 7035 Art. no.

Price (€)

Art. no.

Price (€)

1200

800

1480

200

Z-38.12-41

71713

4,442.-

71705

3,832.-

1200

800

1940

350

Z-38.12-41

71714

4,689.-

71709

4,061.-

MS-TP-elh 2000

1800

800

1940

460

Z-38.12-41

–

71711

4,739.-

MS-TP-elh 2400

2200

800

1940

510

Z-38.12-41

–

71712

5,267.-

Art. no.

Price (€)

72125

148.-

84964

394.-

–

401.-

–

194.-

39186

628.-

MS-TP-elh 900

MS-TP-elh 1300

Approval

Accessories Type

Control platform I Control platform II MS mobile Special coating Ventilation hood

Description 3

For additional equipment like overfill protection, please refer to pages 127 – 129.

118

COLLECTION CONTAINERS FOR DISPOSAL

RIETBERG CONTAINERS 2017

HAZARDOUS SUBSTANCE COLLECTORS GS-TP-ELH [FLAMMABLE FLUIDS]

GENERAL TECHNICAL APPROVAL, DIBT, BERLIN

Z-38.12-59

Their benefits › German general technical approval as storage container for all types of flammable fluids, like waste oil of unknown origin and petrol or kerosene as well as other water-polluting fluids of all water hazard classes › The containers are explosion blast proof and withstand even explosions on the inside for operation without flashback arrestor › Filling via a filling funnel with a diameter of 400 mm, manually operated shut-off ball valve and self-locking cover operated via foot pedal; GS 250 and GS 400 with manually operated cover › Installation in buildings and outdoors › Double-walled design for installation of several tanks next to each other without any gaps and without storage space for collection › Full steel design for extreme durability and long service life › The containers are hot-dip galvanised on the inside and outside for optimum protection against corrosion › If required, empty containers may also be transported by forklift truck, pallet truck or crane

Technical characteristics › Hot-dip galvanised on the inside and outside › Double-walled permanent off-grid vacuum leakage monitoring at both walls 1 › Filling funnel with coarse screen insert, 400 mm diameter, approx. 30 litres capacity 3 › Manual shut-off ball valve in the filler line under the funnel › Hydraulic overfill protection › Ventilation line › Dipstick › Extraction line with lockable safety screw fitting › 2 lifting brackets for empty transport, safe crane lifting acc. to BGI 556 › Operation by qualified professionals

COLLECTION CONTAINERS FOR DISPOSAL

RIETBERG CONTAINERS 2017

119

Available models Dimensions (mm) Type / content

GS-T-elh 250

GS-T-elh 400 GS-TP-elh 600 GS-TP-elh 995

Hot-dip galvanised

Weight (kg)

Art. no.

Price (€)

750

1050

170

Z-38.12-59

71371

3,043.-

1000

1025

200

Z-38.12-59

71372

3,456.-

1200

1000

1210

230

Z-38.12-59

71373

3,683.-

1450

1250

1230

290

Z-38.12-59

71374

4,217.-

Art. no.

Price (€)

Approval

Accessories Type

Description

Additional sleeve 2" I

For collection containers type AS / GS / GD. For overfill protection installation

83674

74.-

Additional sleeve 2" II

For collection containers type AS / GS / GD. With filler line for filling via an additional fixed line. 4 Durable base construction designed for in-house transport of the filled container with forklift equipment.

83673

92.-

–

401.-

GS mobile

For additional equipment like overfill protection, please refer to pages 127 – 129.

120

COLLECTION CONTAINERS FOR DISPOSAL

RIETBERG CONTAINERS 2017

HAZARDOUS SUBSTANCE COLLECTORS GS-TP-ELH [FLAMMABLE FLUIDS]

Their benefits › German general technical approval as storage container for all types of flammable fluids, like waste oil of unknown origin and petrol or kerosene as well as other water-polluting fluids of all water hazard classes › The containers are explosion blast proof and withstand even explosions on the inside › Filling via a filling funnel with a diameter of 400 mm, manually operated shut-off ball valve and self-locking cover operated via foot pedal and Bowden cable › Complete including control platform with grated tread surfaces; for container diameters as of 1400 mm with railing › Installation in buildings and outdoors › Double-walled design for installation of several tanks next to each other without any gaps and without storage space for collection › Full steel design for extreme durability and long service life › The containers are hot-dip galvanised on the inside and outside for optimum protection against corrosion

Technical characteristics › Hot-dip galvanised on the inside and outside › Double-walled permanent off-grid vacuum leakage monitoring at both walls 1 › Filling funnel with coarse screen insert, 400 mm diameter, approx. 30 litres capacity 3 › Manual shut-off ball valve in the filler line under the funnel 3 › Hydraulic overfill protection › Ventilation line › Dipstick › Extraction line with lockable safety screw fitting › Lifting brackets for empty transport, safe crane lifting acc. to BGI 556 › Operation by qualified professionals

GENERAL TECHNICAL APPROVAL, DIBT, BERLIN

Z-38.12-59

COLLECTION CONTAINERS FOR DISPOSAL

RIETBERG CONTAINERS 2017

121

Available models Dimensions (mm) Type / content

Hot-dip galvanised

Weight (kg)

Art. no.

Price (€)

GS-TP-elh 1000

2410

1050

1385

380

Z-38.12-51

71375

4,994.-

GS-TP-elh 1500

3110

1050

1385

580

Z-38.12-51

71376

6,525.-

3810

1050

1485

690

Z-38.12-51

71377

6,877.-

3200

1300

1760

560

Z-38.12-51

71378

6,877.-

GS-TP-elh 2000-100 GS-TP-elh 2000-125

Approval

GS-TP-elh 2900

3550

1500

1930

710

Z-38.12-51

71379

7,219.-

GS-TP-elh 3000-100

4300

1050

1385

875

Z-38.12-51

71380

7,321.-

GS-TP-elh 3000-125

3890

1300

1760

730

Z-38.12-51

71381

7,321.-

GS-TP-elh 3500

4300

1300

1760

945

Z-38.12-51

71382

7,828.-

GS-TP-elh 5000-125

5610

1300

1760

1130

Z-38.12-51

71383

9,684.-

GS-TP-elh 5000-140

4910

1500

1930

1280

Z-38.12-51

71384

9,684.-

GS-TP-elh 6250

5930

1500

1930

1405

Z-38.12-51

71385 10,863.-

GS-TP-elh 7500

6715

1500

1930

1530

Z-38.12-51

71386 12,042.-

GS-TP-elh 8750

7490

1500

1930

1705

Z-38.12-51

71387 12,344.-

GS-TP-elh 10000

8265

1500

1930

1780

Z-38.12-51

71388 12,642.-

Accessories Art. no.

Price (€)

Additional sleeve 2" I

Type

For collection containers type AS / GS / GD. For overfill protection installation

83674

74.-

Additional sleeve 2" II

For collection containers type AS / GS / GD. With filler line for filling via an additional fixed line. Explosion blast proof; for protection of the ventilation line of storage containers for flammable fluids with a capacity of more than 1,000 litres

83673

92.-

39186

628.-

Ventilation hood

Description

For additional equipment like overfill protection, please refer to pages 127 – 129.

Hazardous substance collector, type GS-TP-elh, for water-polluting and flammable substances. Here, installed in a fire protection container

122

COLLECTION CONTAINERS FOR DISPOSAL

RIETBERG CONTAINERS 2017

HAZARDOUS SUBSTANCE DEPOT GD-TP-ELH [FLAMMABLE FLUIDS]

GENERAL TECHNICAL APPROVAL, DIBT, BERLIN

Z-38.12-46

Their benefits › Easy operation by everyone › German general technical approval as storage container for all types of flammable fluids, like waste oil of unknown origin and petrol or kerosene as well as other water-polluting fluids of all water hazard classes › The containers are explosion blast proof and withstand even explosions on the inside for operation without flashback arrestor › Filing via a filling funnel with a diameter of 300 mm and a self-locking cover operated via foot pedal and a shut-off element › Installation in buildings and outdoors › Double-walled design for installation of several tanks next to each other without any gaps and without storage space for collection › Full steel design for extreme durability and long service life › The containers are hot-dip galvanised on the inside and outside for optimum protection against corrosion › If required, empty containers may also be transported by forklift truck, pallet truck or crane

Technical characteristics › Hot-dip galvanised on the inside and outside › Double-walled permanent off-grid vacuum leakage monitoring at both walls 1 › Filling funnel with coarse screen insert, 300 mm diameter, approx. 15 litres capacity 3 › Self-locking shut-off slide operated via foot pedal in the filler line under the funnel › Hydraulic overfill protection › Ventilation line › Dipstick › Extraction line with lockable safety screw fitting › 2 lifting brackets for empty transport, safe crane lifting acc. to BGI 556

COLLECTION CONTAINERS FOR DISPOSAL

RIETBERG CONTAINERS 2017

123

Available models Dimensions (mm) Type / content

Art. no.

Price (€)

170

Z-38.12-46

73353

3,636.-

200

Z-38.12-46

73354

4,365.-

1210

230

Z-38.12-46

73355

4,429.-

1230

290

Z-38.12-46

73356

4,701.-

Art. no.

Price (€)

GD-TP-elh 250

800

1200

GD-TP-elh 400

1000

1025

1200

1000

1450

1250

GD-TP-elh 600 GD-TP-elh 950

Hot-dip galvanised

Weight (kg)

Approval

Accessories Type

Description

Additional sleeve 2" I

For collection containers type AS / GS / GD. For overfill protection installation

83674

74.-

Additional sleeve 2" II

For collection containers type AS / GS / GD. With filler line for filling via an additional fixed line. Cleaning dome for flammable fluid containers, 400 mm diameter, domed folding cover secured with 4 eye screws Durable base construction designed for in-house transport of the filled container with forklift equipment

83673

92.-

85996

1,375.-

DOM III

GD mobile

–

401.-

For additional equipment like overfill protection, please refer to pages 127 – 129.

GD-TP-elh 950, special model Equipment: Stainless steel on the inside, steel/coated on the outside, suction line with flange

GD-TP-elh 950, special model Mobile model with DOM II cleaning dome, rear view

124

COLLECTION CONTAINERS FOR DISPOSAL

RIETBERG CONTAINERS 2017

HAZARDOUS SUBSTANCE DEPOT GD-D-ELH [FLAMMABLE FLUIDS]

Their benefits › Special pressure container for collection and storage of chemicals. › Double-walled container with vacuum leakage indicator › The containers are explosion blast proof, thus withstand even explosions on the inside; they can be operated without flame arresters › Various material combinations for different contents available › Individual equipment options offer practical solutions for individual requirements › Pressure-resistant up to 5 bar › Vacuum-resistant › Suitable for in-house transport › Design according to the Pressure Equipment Directive › TÜV approval as pressure container › Optional approval for suitability as storage container in individual cases

Technical characteristics › Double-walled 1 › Permanent oﬀ-grid vacuum leakage monitoring on both walls 1 › Models in various materials › Explosion blast proof › PE lugs › Brackets for marking plates › Various connection options 2 › Large cleaning dome, ø 400 mm › Discharging design › Stacking frame › Forklift mounting from all sides › Lifting brackets › Admissible pressure -1.0 / +5.0 bar › Admissible temperature -20 / +50 °C

2 3

AD 2000 REGULATIONS

PRESSURE CONTAINER

Available models Dimensions (mm) Type / content

GD-D-elh 1000-v

1200

1600

Weight (kg)

Pressure container Inside

Outside

Transport frame

500 Steel galv.

Steel galv.

Art. no.

Price (€)

98152

7,963.8,668.-

GD-D-elh 1000-l

1200

1600

500 Steel, raw

Steel, coated

Steel galv.

98153

GD-D-elh 1000-e1

1200

1600

500 Stainless steel 1.4301 Stahl coated

Steel galv.

98154

GD-D-elh 1000-e2 GD-D-elh 1000-e3

1200 1200

1600 1600

500 Stainless steel 1.4571 Stainless steel 1.4301 Steel galv. 500 Stainless steel 1.4571 Stainless steel 1.4301 Stainless steel 1.4301

98155 Upon 98156 request

Accessories Type

Description

Price (€)

Pump sump

For optimum residual discharge

Upon request

Filling funnel

For manual ﬁlling with lockable cover

Upon request

Cover plate for 3 For easy cleaning upper base Control platform 4 Folding, with grating Additional sizes, equipment and connections on request

Upon request Upon request

COLLECTION CONTAINERS FOR DISPOSAL

RIETBERG CONTAINERS 2017

125

EQUIPMENT FOR SYSTEMS WITH FIRE-RESISTANT AND FLAMMABLE FLUIDS EXTRACTION SYSTEMS Extraction systems are designed for easy, clean and safe refilling of waste fluids from large vessels like barrels into storage containers without endangering people or the environment. Extraction systems generally include the following components: › Gear pump with secure intake function even when dry. AC motor, 230 V, 0.75 kW. Pumping capacity approx. 50 l/min › Edge filter for pump protection against coarse dirt › Intake hose with 1" intake lance with shut-off ball valve and screen, 3.5 m total length › Control cabinet with all elements required for operation and control including overfill protection for optical and acoustic indication of the admissible filling level and deactivation of the extraction unit › Protective housing Type-specific differences are listed in the final table.

Scope of delivery: Control cabinet, extraction pump 0.75 kW, intake capacity approx. 50 l/min, panel, 3.5 m, intake hose, intake lance, edge ﬁlter, pressure-side tubing, overﬁll protection

Type

Description

Art. no.

Price (€)

85575

6,645.-

33350

6,697.-

85030

8,192.-

85994

9,861.-

85415

7,607.-

FIRE-RESISTANT FLUIDS

AIII

AIII-w

Fully panel-mounted at the container, IP 54 control cabinet integrated in the protective housing, fully connected incl. piping Fully panel-mounted for on-site wall installation, IP 54 control cabinet integrated in the protective housing; on-site connection and piping between extraction system and container

FLAMMABLE FLUIDS

AI-ex AI-w

Pump system with ex-proof on/oﬀ button panel-mounted at the container. IP 54 control cabinet for mounting outside of the EX zone; except for control cabinet connection, fully connected including piping Pump system and control cabinet with EEx-d housing inside the protective housing fully panel-mounted on the container, connected incl. piping Pump system and IP 54 control cabinet, fully panel-mounted for on-site wall mounting outside of the EX zone; cabling and piping between extraction system and container on-site

126

COLLECTION CONTAINERS FOR DISPOSAL

RIETBERG CONTAINERS 2017

OVERFILL PROTECTION If containers are filled in such a way that the filling level cannot be identified (i.e. via a fixed line), it has to be ensured that the container cannot be overfilled. Overfill protection generally includes the following two components: › Level sensor permanently mounted in the container with a PTC thermistor changing its electrical resistance on reaching the admissible filling level. › Transducer generating an optical and acoustic signal from this change in resistance for stopping the filling process. For type-specific differences, please refer to the table (see below).

Scope of delivery: Level sensor, transducer, mounted at ordered Rietberg container

Type

Description

Art. no.

Price (€)

FIRE-RESISTANT FLUIDS

AIII-K

1 Control cabinet, protection type IP 54, with panel-mounted transducer at the

31195

1,715.-

AIII-K-40

container; fully connected 2 Transducer, protection type IP 40, with simple bracket mounted at the container; fully connected

86286

891.-

31303

2,364.-

85974

4,273.-

85998

2,503.-

55958

748.-

FLAMMABLE FLUIDS

AI-K AI-ex-K AI-Cont.

IP 54 control cabinet with transducer for mounting outside of the EX zone of the container; connection between level sensor and control cabinet on site Control cabinet with EEx-d housing with transducer, completely panel-mounted on the container and fully connected IP 54 control cabinet with transducer for mounting outside of the Ex-zone of the container, 10 m cable with plug connector for connection of a level sensor; the level sensor is separately enclosed; for on-site mounting in a mobile container Level sensor, 500 mm long, separate

RIETBERG CONTAINERS 2017

COLLECTION CONTAINERS FOR DISPOSAL

127

Example for EX zone classification

OPTION I: Zone 0: Zone 0 is the interior of the storage container including feed and ventilation lines. In this area, dangerous explosive atmospheres occur permanently or frequently.

OPTION II: IP 54 control cabinet Control cabinet with EEx-d housing

Zone 1: In this area in the vicinity of openings, dangerous explosive atmospheres may occur occasionally during operation. Zone 2: In this area at a larger distance to a container, dangerous explosive atmospheres do not occur or only temporarily.

No EX zone: No flammable vapour/air mixtures

Ventilation line

128

COLLECTION CONTAINERS FOR DISPOSAL

RIETBERG CONTAINERS 2017

COLLECTION CONTAINERS FOR DISPOSAL

129

LEGAL REQUIREMENTS FOR STORAGE CONTAINERS (GERMANY) The requirements for installation of storage containers for water-polluting, non-flammable substances, fire-resistant (formerly technical rules for flammable fluids TRbF AIII) and flammable fluids are defined for Germany in the ordinance on industrial safety and health (BetrSichV) of the technical rules for operating safety (TRBS) and the ordinance on installations for the handling of substances hazardous to water (VAwS). The Vd-TÜV datasheet 967 for fuel systems is regarded as the state of the art and is to be observed. Building and fire protection regulations may also be applicable.

Capacity (m3)

Weight (t)

Water hazard class 1

< 0,22

< 0,2

Level A

≤1

Level A

Level B

≤ 10

Level A

Level B

Level C

> 10

≤ 100

Level A

Level C

Level D

> 100

≤ 1,000

Level B

Level D

> 1,000

Level C

Level D

130

FUEL EXTRACTION AND FUELLING EQUIPMENT

RIETBERG CONTAINERS 2017

FUEL EXTRACTION AND FUELLING EQUIPMENT

131

06 FUEL EXTRACTION AND FUELLING EQUIPMENT

132

FUEL EXTRACTION AND FUELLING EQUIPMENT

RIETBERG CONTAINERS 2017

RIETBERG FUEL EXTRACTION AND FUELLING EQUIPMENT Automotive workshops are often confronted with the problem of draining and refilling the fuel tanks of vehicles in compliance with all applicable accident prevention regulations. Welding of the vehicle body, repairs at the fuel tank or simply filled with the wrong fuel! How is the fuel now discharged from the vehicle? But fire and other emergency services or industrial plants also often have to pump water-polluting substances quickly and safely. With a Rietberg Mobilus, this problem can be easily solved! A Rietberg Mobilus brings safety to workshops or wherever it is needed. Hazardous improvisation is a thing of the past. This product range offers easy operation – even by only one person – and needs-oriented accessories. Mobilus equipment complies with all applicable technical and legal regulations. They are ex-proof, comply with ATEX regulations and the Machinery Directive and can be used for diesel and petrol. CE marking is a matter of course!

FUEL EXTRACTION AND FUELLING EQUIPMENT

RIETBERG CONTAINERS 2017

133

REFILLING EQUIPMENT MOBILUS PORTABLE [FUELS]

Technical characteristics › Compressed air diaphragm pump 3 › Intake/pump output up to 40 l/min (depending on the suction line) › Metal mesh-coated, electrically conductive intake probe 6 , DN8, 3.5 m long › DN19 x 2500 pressure hose, coupling nut for pump connection at one end, the other end open › Extraction through openings as of a diameter of Ø 15 mm

Their beneﬁts › Safe pumping of fuels › Oﬀ-grid application › High intake capacity › Low weight › Needs-oriented accessories › Compact and safe design › Universal and quick application › Easy handling › Optimum safety standard

Dimensions (mm) Type / content

Mobilus portable

2 3

350

320

465

Weight (kg)

Description

11.5 Compressed air diaphragm pump 3 for the safe pumping of fuels, mounted on a support frame

Art. no.

Price (€)

97154

1,453.-

Accessories Art. no.

Support frame Pressure relief valve Intake hose Discharge hose

Art. no.

Price (€)

Support frame for 2 gas cylinders á 6 litres, 300 bar (cylinders are not included in the scope of delivery) with T-ﬁtting for parallel operation 5 300-10 bar, incl. 4 m compressed air hose and connection coupling

Price (€)

72510

528.-

72511

340.-

6 DN 19 x 4 intake hose, 2.5 m long, electrically conductive; for extraction from containers with larger openings 7 DN 19 x 4 discharge hose, 4 m long, electrically conductive, coupling nut for pump connection at one end, the other end with mounted automatic ZVA petrol discharge nozzle (Elaﬂex)

72492

68.-

72622

318.-

Available models

134

FUEL EXTRACTION AND FUELLING EQUIPMENT

RIETBERG CONTAINERS 2017

INTAKE AND FUELLING EQUIPMENT MOBILUS 100

[FUELS] 1 2

Their benefits › compressed air-operated fuel extraction equipment for safe draining of fuel tanks in vehicles › Compliance with all accident prevention regulations during draining and fuelling › Uncomplicated handling, easy positioning › Universal and safe application › Approved for intermediate storage › Interchangeable container for use of diﬀerent fuels are optionally available

Technical characteristics › Containers hot-dip galvanised on the inside and outside › Powder-coated transport trolley › Explosion blast proof container › Overﬁll protection inside the container › Compressed air diaphragm pump › Metal mesh-coated, electrically conductive intake probe, DN 8; 2.5 m long › Discharge hose DN 13; 2,5 m long › Manual discharge nozzle

FUEL EXTRACTION AND FUELLING EQUIPMENT

RIETBERG CONTAINERS 2017

135

Available models Dimensions (mm) Type / content

Mobilus 100

500

720

1320

Container 100

400

925

Hot-dip galvanised

Weight (kg)

Description

86 Complete with interchangeable container with a capacity of 100 litres, with ﬁller neck and overﬁll protection; separate extraction and discharge hose, pump capacity approx. 10 l/min 35 Additional interchangeable container with a capacity of 100 litres

Art. no.

Price (€)

97038

3,591.-

84414

806.-

Accessories

Type / content

Art. no.

Price (€)

Automatic discharge nozzle, NW 19 outlet, max. ﬂow 75 l/min

Description

34435

241.-

Automatic discharge nozzle, NW 16 outlet, max. ﬂow 50 l/min Inspection window for checking the media ﬂow for installation into the suction line

50615 37999

241.68.-

Cone-shaped special adapter for attachment to the intake hose of fuel extraction equipment and connection of the intake probe to the fuel line of the mobile vehicle Compressed air ﬁlter 7 For safe supply of fuel extraction equipment with clean compressed air

97840

43.-

39169

92.-

Gas balance equipment

71301

170.-

Dirt ﬁlter

83677

46.-

ZVA 19 diesel ZVA 19 Petrol Inspection window

Adapter

For return direction of gases from the container to be ﬁlled into the extracted container 5 For installation into the suction line and protection of pump and ﬁttings from foreign objects

Hot-dip galvanised

136

AUS 32 (ADBlueÂ®) DELIVERY EQUIPMENT

RIETBERG CONTAINERS 2017

AUS 32 (ADBlue®) DELIVERY EQUIPMENT

137

07 AUS 32 (AdBlue®) DELIVERY EQUIPMENT

138

AUS 32 (ADBlue®) DELIVERY EQUIPMENT

RIETBERG CONTAINERS 2017

FUELLING SYSTEM MOBILUS BLUE

[AUS 32 (ADBLUE®)] Their benefits › Mobile fuelling system › Easy positioning › Easy handling › Fixed plastic container › Integrated overﬁll protection, thus overﬁlling is impossible

Technical characteristics MOBILUS BLUE-A, B AND C

› Transport trolley with 2 fixed castors, D = 250 mm, and 2 swivelling castors with locking brake, D = 125 mm › Rated/usable capacity – 200/175 litres (depending on the position of the float switch for automatic deactivation of the filling process for types MOBILUS Blue-A and MOBILUS Blue-B) › Electric diaphragm pump 230 V, 6 – 20 l/min (depending on model and customer request) › Filling opening DN 100 › Venting via ball valve

AUTOMATIC FUEL TERMINAL, TAU 2 (MOBILUS BLUE-A AND B) 2

› Freely configurable: » Release code for fuelling process authorisation » Max. pre-selection volume; can be individually overwritten for each fuelling process » Max. delivery volume per fuelling process » Max. delivery time per fuelling process » Max. number of zero fuelling (1 – 100) before the unit is locked » Filling code for filling process authorization (Mobilus container) › For each fuelling process, an order number with up to 6 digits can be entered. › Display: » Numerical display, 6-digit, 26 mm digit height » Text display, 2 x 16 characters, 5 mm digit height › Receipt printer (optional); information on printout » Date » Product » Order number » Vehicle identification (max. 16 characters) » TARGET volume » ACTUAL volume

AdBlue® is a registered trademark of the German Association of the Automotive Industry (VDA).

AUS 32 (ADBlue®) DELIVERY EQUIPMENT

RIETBERG CONTAINERS 2017

139

Available models Dimensions (mm) Type / content

Mobilus 200 Blue-C (without automatic fuel terminal)

1060

715

1340

Mobilus 200 Blue-A (with automatic fuel terminal)

1060

715

1340

1060

715

1340

Mobilus 200 Blue-B (with automatic fuel terminal)

Weight (kg)

Description

95 Additional technical characteristics: including LCD display for indication of the current flow and the discharged volume; 4 m discharge hose with stainless steel automatic discharge nozzle; 2 m intake hose with CDS coupling for IBCs for self-filling; ball valve for switching of the pump from fuelling to self-filling; extraction function for draining of AdBlue® tanks with 3.5 m intake hose, D = 15 mm and stainless steel tip 100 Additional technical characteristics: 4 m discharge hose with stainless steel automatic discharge nozzle; 2 m intake hose with CDS coupling for IBCs for self-filling; ball valve for switching of the pump from fuelling to self-filling; float switch for pump deactivation during filling 100 Additional technical characteristics: 4 m discharge hose with stainless steel automatic discharge nozzle; filling via external 230 V pump (e.g. delivery systems page 131); isolated ground receptacle for power supply of the external pump; float switch for deactivation of the power supply of the external pump on reaching the maximum filling capacity of the Mobilus container

Art. no.

Price (€)

98144

5,789.-

78571 10,033.-

98142 10,033.-

Accessories

Type

Receipt printer

Description

For TAU 2 automatic fuel terminal, suitable for MOBILUS Blue-A and B; information on the printout: Date, product, order number, vehicle identification (max. 16 characters), TARGET volume, ACTUAL volume Activated carbon filter 4 Activated carbon filter assembly kit for ventilation Special length hose

Discharge and intake hose NW 19, 2.5 m long, without discharge nozzle Surcharge per discharge or intake hose metre; available in lengths 2.5 to 10 m; please specify length on order!

For additional accessories, please refer to page 43.

Art. no.

Price (€)

46125

756.-

97892

268.-

97893

71.-

97893-1

21.-

140

AUS 32 (ADBlue®) DELIVERY EQUIPMENT

RIETBERG CONTAINERS 2017

FUELLING SYSTEM MOBILUS ECO BLUE [AUS 32 (ADBLUE®)]

Their beneﬁts › Convenient and easy-to-operate delivery equipment › Moveable for safe fuelling of vehicles with AUS 32 (AdBlue®) › Quick, safe and universal › High intake capacity › Low weight › Needs-oriented accessories › Optimum safety standard

Technical characteristics › Chassis with swivelling and ﬁxed castors (L x W x H: 780 x 750 x 1100 mm) › Electric diaphragm pump › 6 m discharge hose › Manual discharge nozzle › Supplied unmounted BARREL NOT INCLUDED IN THE SCOPE OF DELIVERY

Put together your MOBILUS ECO Blue according to individual requirements: T R O L L E Y EC O B LU E

B LU E B A S I C 230 V

+ B LU E B A S I C 12 V

B LU E- C 230 V

I N TA K E TUBE

Optional: AU TO M AT I C D IS C H A R GE N OZ Z L E , F L O W METER E TC . (refer to page 132)

TROLLEY Type

Trolley ECO Blue

Description 1

Art. no.

Coated chassis with swivelling and ﬁxed castors for barrels of up to 220 l

Price (€)

43936 Upon request

DELIVERY SYSTEMS

Scope of delivery: Electric pump, approx. 30 l/min., 6 m discharge hose, intake hose, with CDS coupling, manual discharge valve and connection adapter Type

Blue Basic 230 V

Description 2

Art. no.

For mounting at an IBC or the ECO Blue 1 trolley; pump system with bracket,

Price (€)

43938

230 V electric pump, approx. 30 l/min, 1.5 intake hose, with CDS coupling without intake tube 5 Blue Basic 12V

Blue-C 230 V

Intake tube

For mounting at an IBC or the ECO Blue 1 trolley; pump system with bracket, 12 V electric pump, approx. 30 l/min, 1.5 intake hose, with CDS coupling without intake tube 5 4 For mounting at barrels; pump system with positionable base plate, 230 V electric pump, approx. 30 l/min, with suction line 5 2-part intake tube, can be shortened, for IBCs and barrels of up to 220 l with CDS connection. 2

46104 Upon request 46107

44005 5

AUS 32 (ADBlue®) DELIVERY EQUIPMENT

RIETBERG CONTAINERS 2017

141

FUELLING SYSTEM KS BLUE [AUS 32 (ADBLUE®)]

Their beneﬁts › Practical solution for delivery directly at the vehicle › No ADR certiﬁcate required for transport › Simple operation

Technical characteristics › Single-walled container made of approved polyethylene › Discharge nozzle bracket integrated 1 KS TROLLEY 1

› Integrated: » Grips and carrying handles » Baﬄe › Filing ﬁtting with integrated ventilation and exhaust › Ø 300 mm castors, pneumatic, all-terrain

› Recesses for mounting with ratchet lashing straps › Equipment (mounted): » Self-priming, plunger pump 12 V, with 25 l/min. » 3.7 m discharge hose » 4 m connection cable with terminal clamps » Automatic discharge nozzle KS 200 BLUE 2

› Integrated: » Carrying handles » Ventilation with pressure discharge » Forklift pockets › Belt guides for secure transport › Filler neck DN 100 › Equipment (mounted): » Self-priming, electrical pump, 12 V or 24 V, approx. 30 l/min » 4 m discharge hose » 4 m connection cable with terminal clamps » Automatic discharge nozzle

Available models Dimensions (mm) Type / content

KS-Trolley 100 Blue KS 200-12 Blue KS 200-24 Blue

L 1)

Weight (kg)

Rated pumping capacity (l/min)

Description

1000 800

590 600

430 590

22 25

25 30

Tank pump 12 V 12 V electric pump

800

600

590

24 V electric pump

Art. no.

Price (€)

46101 Upon 46099 request 46100

Accessories Type / content

Description

Art. no.

Price (€)

Automatic discharge nozzle, plastic/stainless steel, max. ﬂow 40 l/min, NW19

43968

Cover for KS Blue

Plastic folding cover

Insulation box for KS Blue

Box with 30 mm insulating boards at the walls and 20 mm at the bottom

46102 Upon 46103 request

ZVA AdBlue®

For additional accessories, please refer to page 43

Our steel solution on page 42

AdBlue® is a registered trademark of the German Association of the Automotive Industry (VDA).

142

CUSTOMER-SPECIFIC SOLUTIONS

RIETBERG CONTAINERS 2017

Rietbergwerke have decades of experience in the design of containers and surface treatment. Thanks to our flexible manufacturing structure and our competent and motivated employees, we are able to quickly react to special requirements.

EXPANSION TANK FOR A THERMAL OIL PLANT

RIETBERG CONTAINERS 2017

CUSTOMER-SPECIFIC SOLUTIONS

143

08 CUSTOMER-SPECIFIC SOLUTIONS

144

CUSTOMER-SPECIFIC SOLUTIONS

RIETBERG CONTAINERS 2017

FUEL CONTAINERS KC 995 TDE Equipped with a dispensing pump and integrated tank data collection. For the fuel supply of construction machinery on construction sites and the management and evaluation of tank data.

TRANSPORT FRAME FOR QUADRO-C 3000 Transport frame for mounting of two QUADRO 3000 fuel containers with optional connection via hoses and dry couplings for interaction. Corner fittings in a 10â&#x20AC;&#x2122; container raster. In use at a production company in the field of natural gas and oil.

FUELLING AND DEFUELLING SYSTEM MT 900 The container is equipped with two diesel pumps and a comprehensive control unit. For emptying (extraction) and/or filling of truck tanks in the service and repair area of a large utility vehicle dealer.

CUSTOMER-SPECIFIC SOLUTIONS

145

CONTAINER ON DIN 30722 FRAME For supply and/or disposal of fluids, tanks may be installed on DIN 30722 frames. Depending on the application, the tanks can be equipped with various accessories. The top figure illustrates a supply container for oil and the figure on the left a container with a high-performance intake pump for collecting hazardous fluids in case of emergency. Both tanks are used by the in-house fire service of a refinery.

RIETBERG CONTAINERS 2017

146

CUSTOMER-SPECIFIC SOLUTIONS

RIETBERG CONTAINERS 2017

SPECIAL TANKS DB Rietbergwerke manufacture special tanks according to customer specifications including factory approval and according to ADO2000 datasheet HP0. The tanks are also available in single quantities or small series. Applications include road marking machinery of a global manufacturer for example.

RIETBERG CONTAINERS 2017

CUSTOMER-SPECIFIC SOLUTIONS

147

SPECIAL TANKS DB

Horizontal collection container, manufactured according to the AD regulations, for a thermal oil plant. According to the specifications, the container was constructed with PN16 ports and coated with a temperature-resistant lacquer.

148

CUSTOMER-SPECIFIC SOLUTIONS

RIETBERG CONTAINERS 2017

FUEL EXTRACTION AND FUELLING EQUIPMENT MOBILUS 100 ELEKTRO Special solution with fully explosion blast proof electric pump and control system. Designed for application in connection with a research project of a German automotive manufacturer.

SPECIAL MODEL MOBILUS 200 BLUE Specially developed for application in a test workshop: Variable flow between 5 – 50 l/min, adjustable temperature 15 – 45 ° C, including auxiliary circulating- and suction pump, volume preselection, as well as display showing volumetric flow and temperature.

RIETBERG CONTAINERS 2017

CUSTOMER-SPECIFIC SOLUTIONS

149

CHEMICAL CONTAINER CC 200

Double-walled pressure vessel made of stainless steel with transport approval for highly toxic substances. The system with a special coupling unit is used by a manufacturer for medicaments. The coupling allows the container to be filled, emptied and spilled manless.

150

CUSTOMER-SPECIFIC SOLUTIONS

RIETBERG CONTAINERS 2017

FUELLING AND DEFUELLING SYSTEM KA 995 Equipped with two pumps and a fully explosion blast proof control system. For draining (extraction) of vehicle tanks via the tank fitting or fuelling of vehicles. In use at an automotive logistics service provider.

DIESEL SUPPLY CONTAINERS KA Storage containers for diesel supply to pump systems. Equipped with longitudinal skids under the supports as well as brackets for towing the container. The container is also equipped with brackets for lifting if empty. All openings are tightly sealed. Connection to the pump system is realised via flexible stainless steel hoses with dry couplings.

RIETBERG CONTAINERS 2017

CUSTOMER-SPECIFIC SOLUTIONS

151

FUEL SYSTEM KA 7500 Storage tank with a capacity of 7,500 litres stored in a maritime container. Thanks to reinforcements in the floor of the container, the system can be relocated in an empty state. Since the system has been installed in a harbour, the version has been implemented with a corresponding level of ruggedness. Relocation is required e.g. in the event of a possible flooding of the harbour area. The system has been equipped and delivered in an operationally ready state.

FILLING SYSTEMS FOR SPECIAL FUELS (2-STROKE MIXTURES) LT-ELH 7500

Filling system for small containers (also available as non-calibratable model for in-house application). The system includes a storage container with a capacity of 3,000 to 10,000 litres, a calibratable or non-calibratable discharge unit, a tray with grating overlay for ergonomic canister filling and a roof.

152

RIETBERG CONTAINERS 2017

KEYWORD INDEX A

Delivery equipment for urea solutions 140 Petrol filling systems 28 Diesel filling systems 16 Filling station 22 Extraction systems for fire-resistant and flammable fluids127 Extraction and fuelling equipment for fuels 135 Waste oil collector 113 Requirements for petrol on-site filling stations 31 Requirements for diesel on-site filling stations 26 AS 113 Equipment for systems with fire-resistant and flammable fluids 127 Equipment for fuel containers 50

GD Hazardous substance depot Hazardous substance collector Legal requirements for storage containers Legal regulations for mobile fuel systems GS

Petrol extraction and fuelling equipment Petrol on-site filling stations Petrol fuel systems, mobile Petrol fuel systems, stationary Fuelling areas

135 28 61 28 22

CONTY for petrol CONTY for diesel

61 54

Diesel extraction and fuelling equipment Diesel on-site filling stations Diesel fuel systems, mobile Diesel fuel systems, stationary

135 16 36 16

On-site filling stations, diesel On-site filling stations, petrol

16 28

110 124 120 109, 131 36, 68, 88 120

Information page: Requirements for petrol fuel systems 31 Information page: Requirements for diesel fuel systems 26 Information page: Requirements for storage and collection containers for flammable fluids 109, 131 Information page: Requirements for storage and Collection container for non-flammable or hardly flammable fluids 109, 131 Information page: Legal regulations for mobile fuel systems 36, 68, 88 K

KA Petrol KA-Diesel KAP ECO KAP GIRO KC 995 KC 2900 KC-AG 5500 KC-K KC-S KC standing cylindrical KC QUADRO (s. QUADRO-C) Fuel filling station Fuel extraction and fuelling equipment Fuel container for petrol Fuel container for diesel Fuel refilling equipment QUADRO-AG fuel container for power units and heaters Fuel supply systems KS Blue KS-Trolley Blue Customer-specific solutions

28 16 22 23 49 48 84 47 46 49 36 22 135 61 36 135 76 16 143 143 146

153

RIETBERG CONTAINERS 2017

Legal notice Publisher: Rietbergwerke GmbH & Co. KG Behältertechnik Bahnhofstraße 55 33397 Rietberg, Germany Phone +49 5244 983 200 Fax +49 5244 983-201/-444 behaeltertechnik@seppeler.de www.rietberg-behaelter.de

61 36 136 140 142 135 135 116 96 116 96

Collection tanks, stationary for: › Hazardous substances › Flammable fluids › Non-flammable fluids › Fire resistant fluids › Waste fuels › Waste oil › Engine oil › Lubricants Stationary fuel systems for diesel and petrol Stationary fuel systems for diesel Stationary fuel systems for petrol Special tanks

120, 124 120, 124 96, 113, 116 96, 113, 116 120, 124 113, 120, 124 113 113 28 16 28 143

Mobile fuel systems for petrol Mobile fuel systems for diesel Mobilus 100 Mobilus Blue Mobilus ECO Blue Mobilus units Mobilus portable MS MT Multi-collector Multi tank

76 36 42 58 82 80

Fuelling areas

Refilling equipment for fuels

135

Reproduction – in whole or in part – only with written approval by Rietbergwerke GmbH & Co. KG. With publication of this catalogue, the previous catalogue becomes invalid – including printouts and electronic formats. Legal information All specified prices are net prices per unit without value added tax for delivery ex works unless specified otherwise. Technical changes and errors, product range changes, and delivery options shall remain explicitly reserved. Liability for printing errors and incorrect technical specifications and illustrations shall be excluded.

QUADRO-AG QUADRO-C QUADRO-C blue QUADRO-CE QUADRO-TA 700 QUADRO-C Cascade

Storage containers for fire-resistant fluids: › Non-flammable fluids › Fire resistant fluids › Waste fuels, diesel › Waste oil, known origin › Lubricants › Chemicals › Engine oil Multi-tank storage container LT

96 102, 118 102, 118 102, 118 102, 118 102, 118 96 100, 113, 116 100, 113, 116 100, 113, 116 100, 113, 116 100, 113, 116 100, 113, 116 100, 113, 116 96 100

Our general terms and conditions shall apply: http://www.rietberg-behaelter.de/agb/

Storage containers for flammable fluids: › Hazardous substances › Flammable fluids › Waste fuels › Waste oil, unknown origin › Chemicals

Rietbergwerke GmbH & Co. KG Behältertechnik Bahnhofstraße 55 33397 Rietberg, Germany Phone +49 (0) 5244 983 200 · Fax +49 (0) 5244 983-201 behaeltertechnik@seppeler.de www.rietberg-behaelter.de