ADJUSTMENT

Calibration Procedure

− On an appropriate area, mark a track of 100 m length

− Inflate the tyres of the tractor to the prescribed pressure, see tables of this Operator´s Manual

− Start the engine

− Start the tractor in a balanced speed of 10 km.h-1

− After travelling the whole distance of 100 m, stop the tractor on a marked end of the track (see fig. F_02_129)

− Locate the tractor at the beginning of the hundred-metre track

− Press the (A) and (B) buttons simultaneously. Keep the buttons pressed for 7 sec. There will be an acoustic signal and in “c-n-t” inscription starts flashing on the display.

− Release both buttons (A) and (B), “cn-t” inscription stops flashing

− Press (B) button.

− If calibration has been completed without errors, there will be acoustic signal and “Pulse” inscription will appear on the display

− After 2 sec, calibration value will appear on the display.

− After another 2 sec, the calibration is automatically completed, dashboard is calibrated and ready for operation.