1 minute read
Reconditioning the intermediate housing, models SP
from Volvo Penta 280, 280-DP, 285, 290, 290-DP SP-A, SP-C, DP-A, DP-B, DP-C Drives Workshop Manual - PDF
and DP
5. Should the shift fork require replacement, remove the cotter pin (1). Remove the shaft (2) and remove the shift yoke (3). To install reverse procedure.
NOTE! Always use a new cotter pin when reinstalling.
7. Grease the lower hook up fork bushing with Volvo Penta part np. 828250-1 water resistant grease. Using special tool 884259 and 9991801, press in the bushing.
6. Remove the bearing race of the axial bearing. Use special tool 884140 and 884143. Also replace the Orings (1). One on each side of the oil tube.
8. Press the bushing into the hook up fork. Use special tools 884259 with handle 9991801
12. Install the O-ring and the hose connection on the yoke. Use a small amount of Volvo Penta part no. 828250-1 water resistant grease to hold the O-ring in place while installing the hose connection.
