Stopping

5 Use

Neutral

11 Stoppen

• Reduce engine speed to idle and shift the gearbox to ‘Neutral’.

• Turn the key anticlockwise to the "Off" position. N.B. The ‘stop’ position, left of the ‘oFF’ position on the control panel, has normally no function for this engine. When 2 control panels are connected to one engine, the engine can always be stopped by turning the key to the ‘stop’ position, no matter what the position is of the key on the other panel.

note

Never stop the engine immediately after it has been in operation for a long time. Allow the engine to idle for a few minutes before stopping.

Stopping

note

Never switch off the battery main switch directly after the engine has stopped.

Wait at least 2 minutes.

The ECU remains active for about another 40 seconds to save the system data (lag) and then switches off automatically.

Warning

The engine can not be restarted, if the system data is not been saved!

note

If the engine is not to be used for some time, it is recommended that the sea cock is closed and the battery main switch turned off.