Removing the LCD Panel

2. Remove the one screw located on each speaker then detach the speakers out from the system

3. Press down the button to release the PCMCI dummy card then pull the dummy card out from the system

4. Remove the one screw to loosen the mainobard

5. Push outward of the side before releasing the mainboard out from the chassis

1. Detach the upper LCD rubbers 2. Detach the LCD mylars from the lower side

3. Detach the front bezel out from the LCD module

4. Disconnect the LCD power cable from here 5. Disconnect the LCD coaxial cable from here

6. Detach the invertor board out from the position 7. Remove the one screw on each side to detach the LCD panel from the case 8. Lift up the panel then take it out from the case

9. Remove the one screw on each side to detach the antenna from the case

10. Gently to tear the tabs that fasten the antenna cables from the case 11. Then detach the antenna cables from the case

12. Remove the four screws on this side to detach the left bracket 13. Remove the four screws on another side to detach the bracke