
1 minute read
Removing the HDD and ODD
14. Tear the tab before you disconnect the LCD wire 15. Take the LCD wire from here
1. Remove the two screws on each side
2. Detach the HDD bracket from the HDD unit
3. Remove the two screws located on both side to detach the ODD unit from bracket 4. Push backward to release the ODD bracket from the ODD unit
5. Remove the two screws to release ODD board from the rear of the ODD unit
6. Detach the ODD board from the rear side of ODD
Troubleshooting
Use the following procedure as a guide for computer problems. NOTE: The diagnostic tests are intended to test only Acer products. Non-Acer products, prototype cards, or modified options can give false errors and invalid system responses. 1. Obtain the failing symptoms in as much detail as possible. 2. Verify the symptoms by attempting to re-create the failure by running the diagnostic test or by repeating the same operation.