5 minute read
ENGINE AND ANTI-STALL ...............................................................................................PR E L I M I N A R Y
Tigercat 250D Loader Introduction
NON-APPROVED FIELD PRODUCT CHANGES
The installation of any unauthorized attachment or changes made of any kind to this Tigercat product could affect the product's ability to perform as originally intended. The product's integrity, stability and it's ability to perform safely could be at serious risk.
IT IS TIGERCAT POLICY THAT NO CHANGES ARE TO BE MADE TO ITS PRODUCTS INCLUDING DELETIONS OR ADDITIONS OTHER THAN A TIGERCAT APPROVED OPTION FITTED IN THE FACTORY APPROVED MANNER.
Official approval to make changes or install options is only to be undertaken as follows: • The relevant options for that product must be shown or listed on current Tigercat documentation or literature such as a printed specification sheet, price list, parts manual, or product literature issued by Tigercat. • Approved options or product changes authorized in writing by the Tigercat Engineering Manager. Authorization by any other person is unacceptable. Unauthorized changes made or contributed to by a person or organization may result in creating a dangerous situation and therefore the person or organization will be considered to have assumed the risk involved or be negligent in having created this situation. Weight is an important factor when considering the addition of options or an attachment, Refer to your Tigercat distributor for information on maximum permissible operating weight and the effect the addition of various options may have on your machine. Tigercat will not be held responsible for any situation that may arise resulting from Non-approved Field Product Changes to its product. Should Tigercat become involved in a dispute resulting from changes made to the product without proper authorization by Tigercat as stated above, Tigercat will take whatever action is appropriate to protect its interests. The product warranty policy and the certification on any safety items installed on the modified product will become NULL and VOID if the above policy is not adhered to as specified. Non-approved product changes also nullify warranties given to Tigercat by its component manufacturers.
Tigercat Industries Inc.
Introduction Tigercat 250D Loader
REGULATORY INFORMATION
The operator's cab is equipped with standard or optional equipment that is capable of emitting radio frequency fields. Bluetooth and WiFi exposure limits are significantly less than the maximum permitted for public use.
IMPORTANT!
The RemoteLogTM telematics satellite antenna is externally mounted to the operator cab. When transmitting, the external antenna should be separated from personnel by a minimum distance of 20 cm (8 in). Transmissions can be silenced by placing the telematics system in repair mode.
INTERNAL (OPERATOR'S CAB):
Telematics Module (WiFi) Contains FCC ID: VPYLB1CL or NCMOCG2101 IQAN-G11 (Bluetooth) Contains FCC ID: VPYLBZY Radio (Bluetooth) Contains FCC ID: OPDJHD36A Radio (Bluetooth) Contains FCC ID: OPDJHD1635BT Radio (Bluetooth) Contains FCC ID: OPDJHD3630BT
EXTERNAL:
Inmarsat Modem (Satellite) Contains FCC ID: B92IDP1XX Iridium Modem (Satellite) Contains FCC ID: Q639603N These devices comply with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of RF energy that is deemed to comply without maximum permissive exposure evaluation (MPE).
INDUSTRY CANADA NOTIFICATIONS TO USER
INTERNAL (OPERATOR'S CAB):
Telematics Module (Wi-Fi) Contains IC ID: 772C–LB1CL or NCMOCG2101 IQAN-G11 (Bluetooth) Contains IC ID: VPYLBZY
EXTERNAL:
Inmarsat Modem (Satellite) Contains IC ID: B92IDP1XX Iridium Modem (Satellite) Contains IC ID: Q639603N These devices comply with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment and meets RSS102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that is deemed to comply without maximum permissive exposure evaluation (MPE).
Tigercat 250D Loader Introduction
Tigercat Industries Inc. (Tigercat) warrants to the ultimate purchaser and each subsequent purchaser that the engine is designed, built and equipped so as to conform with US Environmental Protection Agency (EPA) regulations applicable at the time of manufacture and that it is free from defects in workmanship or material which would cause it not to meet these regulations for a period of: • 2 years or 1,500 hours of operation, whichever occurs first, for engines less than 19 kW (25 Hp) • 5 years or 3,000 hours of operation, whichever occurs first, for engines greater than or equal to 19 kW (25 Hp) NOTE: This warranty applies to all units operated in the United States or Canada.
Coverage
The model year, class of diesel engine, and emission application determination for your engine are identified on the Emission Control Information Label. This label is affixed to one of the following areas of the engine: the top of engine’s rocker arm cover, the right-hand side of the oil pan, and the right-hand side of the engine front gear cover. The warranty period begins on the date the new equipment is sold to the first retail purchaser. The presence of the emission control label is the indication that the engine conforms to the applicable standards. Any emission control system parts which are proven defective during normal use will be repaired or replaced during the warranty period. The engine owner has responsibility to perform all the required maintenance listed in the Operation and Maintenance Manual. Tigercat will not deny an emission warranty claim solely because no record of maintenance exists; however, a claim may be denied if failure to perform maintenance resulted in the failure of a warranted part. It is recommended that replacement parts used for maintenance or repairs be Tigercat Service Parts to maintain the quality originally designed into your emission certified engine. The use of non- Tigercat parts does not invalidate the warranty on other components unless the use of such parts causes damage to warranted parts. The manufacturer is liable for damages to other engine components caused by the failure of any warranted emission control system part. Tigercat is not responsible for failures resulting from improper repair or the use of parts that are not genuine Tigercat or Tigercat approved parts.
Component coverage
New engines certified for sale and registered will have the following items covered by the emission warranty, depending on the emission level of the engine, if the items were first installed on the new engine as original equipment: Fuel injection system • Fuel injection pump • Fuel injectors • Fuel injection lines Air induction system • Intake manifold
• Turbocharger system (includes exhaust manifold) • Charge air cooler Positive Crankcase Ventilation (PCV) system (if applicable) • PCV valve
• Oil fill cap
