DRIVING MACHINE

Stop

1. Avoid sudden deceleration. Smoothly reduce the drive speed. Release accelerator pedal (2) and step on brake pedal (3) to stop the machine.

2. Return F-N-R lever (5) to neutral (N). Place neutral lever lock (4) to the LOCK position.

3. Turn parking brake switch (1) ON.

4. Level the bucket with the ground surface and lower the bucket to the ground by operating loader control lever (6).

5. Move the lock position of loader control lever lock (7).

IMPORTANT: This machine is equipped with a turbocharged engine. Therefore if the engine is stopped without performing cooling down operation, the lubricant on the turbocharger bearing surfaces may desiccate due to the intense heat present, possibly causing damage to the turbocharger.

6. Run the engine at low idle speed to cool the engine for 5 minutes.