OPERATING ENGINE

Stopping Engine

Stop the engine in the following procedures.

1. Lower the bucket before stopping the engine.

IMPORTANT: If the engine equipped with a turbocharger is stopped without first performing the cool down operation, the lubricant on the turbocharger bearing surfaces may desiccate due to the intense heat present inside the turbocharger, possibly causing damage to the turbocharger.

2. Run the engine at low idle speed for 5 minutes to cool the engine.

3. Turn key switch (1) to OFF position to stop the engine.

4. Be sure to move loader control lever lock (2) in forward and place it in the LOCK position.