OPERATOR’S STATION

If the letters of “ERROR” are displayed on the machine information area (1), immediately stop operating the machine, move the machine to a safe area, park the machine and stop the engine. Contact your nearest TCM dealer for machine inspection.

OPERATOR’S STATION

Switches, Steering Wheel and Pedals

1- Steering Wheel

2- Horn switch

3- Monitor Panel

4- Accelerator Pedal

5- Brake/Inching Pedal (Both right and left sides are interlocked.)

6- Brake/Inching Pedal (Both right and left sides are interlocked.)

7- Neutral Lever Lock (F-N-R Lever)

8- F-N-R Lever

9- Hi-Lo Selector Switch

10- Front Work Light Switch (Cab Vehicle)

11- Hazard Switch

12- Turn Signal Lever

13- Parking Brake Switch

14- Front Window Wiper Switch (Cab Vehicle)

15- Rear Window Wiper Switch (Cab Vehicle)

16- Light Switch fNOTE: Cab vehicle is an optional.

F-N-R Lever

d WARNING: To ensure operator’s safety and ensure the longevity of the power train system, change the machine drive direction only after sufficiently reducing the drive speed.

Changes the machine drive direction from forward to reverse and vice versa.

Move F-N-R lever (1) to the (F) position to travel the machine forward.

Move F-N-R lever (1) to the (R) position to drive the machine in reverse.

When F-N-R lever (1) is placed in the (R) position, backup light (2) lights and the backup buzzer sounds.

fNOTE: The engine will not be started if the F-N-R lever (1) is not in the neutral (N) position.

Neutral Lever Lock (F-N-R Lever)

d WARNING: When the machine is parked or serviced, be sure to place the neutral lever lock in the LOCK position.

The neutral lever lock makes the F-N-R lever immovable so that the machine does not starts moving even if a body part comes in contact with the F-N-R lever by mistake. Before starting the engine, set neutral lever lock (3) in the LOCK position.

Pull: UNLOCK

Push: LOCK