Removal and Installation of Operator's Seat

Items to prepare •Wrench (13 mm) 1.Removal of Operator's Seat [1] Pull the slide lever (1) to slide the seat (2) to the rear. [2] Use a wrench (13 mm) to remove the 2 bolts (3) from the front of the seat.

[3] Pull the slide lever (1) to slide the seat forward, and then pull the reclining lever (4) to fold the seatback forward.

[4] Use a wrench (13 mm) to remove the 2 bolts (5) from the rear of the seat.

1 Slide lever 2 Seat 3 Bolt 4 Reclining lever 5 Bolt

[5] Remove the operator's seat (6).

2.Installation of Operator's Seat

To install, perform the reverse of the removal procedure.

The tightening torque for the seat installation bolts is 19.6 N•m.

6 Operator's seat