Headlights control lever

Yellow 146 Yellow 145 Yellow 144 Yellow 143 Yellow 141 Yellow 135

Read the SAFETY RULES SAFETY RULES on the preceding pages for machine protection and the safety of employees protection limit coolant temperature has exceeded the minimum engine Coolant Temperatue signal indicates

protection shutdown feature is enabled Power derate and possible engine shutdown if engine 23 of the engine harness Low voltage detected at coolant temperature signal pin number

protection for coolant Default value used for coolant temperature. No engine 23 of the engine harness High voltage detected at coolant temperature signal pin number

protection for coolant temperature. Default value used coolant temperature. No engine engine protection limit Oil pressure signal indicates oil pressure below the low minimum

protection shutdown feature enabled Power derate and possible engine shutdown if engine engine harness Low voltage detected at oil pressure signal pin number 33 of the

for oil pressure Default value used for oil pressure no engine protection engine harness High voltage detected at oil presure signal pin number 33 of the

for oil pressure Default value used for oil pressure. No engine protection Yellow 132 Yellow 131 Yellow 123

the OEM harness Low voltage detected at throttle position signal pin number 30 of

switch indicates off-idle and ramps up to a default set speed when idle validation Engine idles when idle validation switch indicates idle the OEM harness High voltage detected a throttle position signal pin number 30 of

indicates off-idle up to a default set speed when the idle validation switch Engine idles validation switch indicates idlea and ramps 45 of the engine harness Low voltage detected at boost pressure sensor signal pin number

Engine will derate to no-boost fueling Yellow 122 yellow 115

number 45 of the engine harness Higth voltage detected at boost pressure sensor signal pin

Engine will derate to no-boost fueling the engine harness

No engine speed or position signal detectedt at pin number 17 of Engine power derate. Possible white smoke Fault Code / Lamp

Reason

Effect (Only when fault code is active) TROUBLESHOOTING LIST

RG 170.B RG 170.B

yellow 241 Red 235 Red 234 Yellow 184 Yellow 155 Yellow 154 Yellow 153 Red 151 Yellow 148 Yellow 147 Yellow 146 Yellow 145

Read the SAFETY RULES SAFETY RULES on the preceding pages for machine protection and the safety of employees harness has been lost Vehicle speed signal on pin numbers 8 and 18 of the OEM

on milsage wiil be oincorrect. governor will not work . Trip information data that is based Cruise control, gear down protection and the road speed Engine spped limited to max Engine speed without VSS indicates coolant level is low Coolant level signal at pin number 37 of the engine harness

shutdown feature is enabled Power derate and possible engine shutdown if engine overspeed limit. Engine speed signal indicates engine speed has exceeded the

the overs Fuel to injectors disabled until engine speed falls below Syncronization Error detected in multi Unit temperature is above the maximum engine protection limit Intake manifold temperature signal indicates intake manifold

Engines will default to idle speed protection shutdown feature Speed derate and possible engine shutdown if engine number 34 at the engine harness Low voltage detected at intake manifold temperature signal pin

No engine protection for intake manifold temperature Default value used for intake manifold temperatute . number 34 of the engine harness High voltage detected at intake manifold temperature signal pin

engine protection for intake manifold temperature. Default value used for intake manifold temperature .No exceed the maximum engine protection limit Coolant temperature signal indicates coolant temperature has

protection shutdown feature is enabled Speed derate and possible engine shutdown if engine frequency value A frequency a bove a calibrated value has been detected ah the

Engine will go to idle Engine will not responde to chenges in frequency thtotle. frequency thrttle signal pin number 4 of the engine harness A frequency below a calibrated value has been detectedat the

Engine will go to low idle Engine will not respond to changes in frequency trhottle. protection limit coolant temperature has exceeded the minimum engine Coolant Temperatue signal indicates

protection shutdown feature is enabled Power derate and possible engine shutdown if engine 23 of the engine harness Low voltage detected at coolant temperature signal pin number

protection for coolant Default value used for coolant temperature. No engine RG 170.B RG 170.B