Hydraulics & Transmission

Adding Hydraulic and Transmission Oil

Change Transmission & Hydraulic oil at every 1300 hrs. of operation. While changing the complete oil of transmission, oil has to be filled in rear housing. Check the level of oil in the Transmission & Hydraulic reservoir as follows:

1. Keep the tractor on level ground.

2. To check oil level, two visible windows are provided on PTO housing.

3. Oil must be visible till the upper level of top window.

4. Fill oil if required by removing the filler cap (A).

5. Add oil of specified grade only.

Hydraulic and Transmission Suction Oil Filter

Change Hydraulics and Transmission oil filter (A) initially at 100 hrs. and subsequently at every 500 hrs. of operation. These Spin-on type filters are located behind on RH side of the tractor. Remove old spin-on filters. Prime the new spin-on filter with clean oil, and fit them.

NOTE : The Hydraulic and Transmission filter though resembles with engine oil filter, it differs in construction and usage. Hence these are not interchangeable.