SAFETY CHAIN

When towing equipment on a highway, use a safety chain as an auxiliary connection between the tractor and the towed equipment. The safety chain must have a rating greater than the gross load of the towed equipment. Connect the chain to the tractor drawbar support and the towed equipment as shown in the illustration. Check the adjustment of the safety chain by turning the tractor completely to the right and left. Adjust the chain as necessary.

Three Point Hitch System

The three point hitch system gives position control and draft control (If equipped) of implements. This tractor is equipped with a category I hitch.

The three-point hitch dimensions are shown in the following table. Implement identification

A - Gap in top of implement mast

B - Diameter of holes in top of Implement mast

C - Diameter of hitch pins

D - Lower Hitch Pin Inner Shoulder Spread mm (1-3/4 inch) mm (3/4 inch) mm (7/8 inch)

UPPER LINK