Control and operation

Working with the machine turer: Quick coupler" is located on the A170 keypad.

S497 is located on the cab control board.

Control of the hydraulic hammer (optional)

Install the hydraulic hammer. Refer to the section "Attaching and dismounting equipments parts" of this manual.

Danger!

Additional operating and control elements (joysticks/pedals) can have different functions.

Always check functions of operating and control elements when you start a machine which has an additional attachment.

For safety instructions, also turer.

For use and control, also refer to the O

You can control the hammer with the pedal or with the joystick.

Use the rotary switch S256 to select one of the two control modes:

The two control modes cannot be activated at the same time.

Make sure that the related mode is selected with the rotary switch S256

Push right pedal 7c of U20

Hydraulic hammer is activated. The left pedal of U20 is not used.