Control, operation

S21 – Creeper gear

The creeper gear allows for precisely controlled travel of the machine at low speeds and improves the travel behaviour of the machine on slopes and in difficult terrain. The creeper gear may only be selected when the machine is standing still. The creeper gear may only be selected when the machine is standing still.

S42 – First gear

The transmission can be operated at two speeds. The first gear is selected with the switch. If the switch is not actuated, the machine is automatically operated in second gear.

S47 - Hydraulic quick-change adapter*

Activates the hydraulic quick-change adapter for the attachment and removal of tool attachments. The quick-change adapter can be locked and released.

S204, S205, S206, S207 - Individual outrigger control*

Activates the outrigger control system. Each outrigger can be operated individually or together with the other outriggers. When the joystick is moved, the activated outriggers are moved.

S241 - Additional user*

This switch determines whether the attachments (additional consumers) or the boom adjustment (if mounted) can be operated.

Depending on the switch position (see chapter "Tool Control"), the consumer is supplied with hydraulic oil at adjusted pressure and flow settings.

S335 - Blade support / dozer blade

Activates the blade support. When the joystick is moved, the blade or dozer blade is operated.

S360 - Acknowledgement of quick change adapter buzzer**

Switches off the acoustic warning signal of the quick-change adapter. A warning signal indicates that the quick-change adapter is not properly locked. If no other tool attachment is to be mounted, it is useful to switch off the warning signal. This is also recommended to ensure that other buzzer sounds (i.e. from the overload warning system) are actually audible.

S363 - Tempomat*

The Tempomat allows you to save the current drive pedal position. This means that the travel speed is maintained even if the foot is lifted from the pedal.

S422 - Radio mute mode

The radio mute mode allows you to reduce the volume of the radio to mute level without switching off the radio.

* optional equipment

** only in conjunction with overload warning system (optional equipment)

3.1.3.2Control console B

S1 - Ignition switch

The ignition switch is used to switch on the electrical equipment and to start the machine.

S16 - Parking brake

The parking brake ensures that the machine cannot roll away. When shutting down and exiting the machine, always apply the parking brake.

During work (e.g. excavator operation), the parking brake must be released, and the machine must be slowed down and kept in its position by the working brake (operated with foot pedal).

S35 - Servo control

The equipment and attachments can only be operated when the servo control is activated.

S92 - Air distribution in legroom

This rotary switch is used to adjust the blower air distribution in the legroom. When the switch is in the left position, the air flows from the exit nozzles at the windscreen. When it is in the right position, the air flows through the exit nozzles at the operator seat.

If the rotary switch is set to an intermediate position, the air is distributed between these two opening systems.