ANTI-THEFT DEVICE (for KCL only

BAnti-Theft Device

This machine is equipped with an anti-theft device, which allows you to start the engine with the registered key alone. If a registered key is stolen, the stolen key can be unregistered. It prevents this key from starting the engine to protect the machine against theft.

With the key at "STOP", the "anti-theft indicator" stays on to tell that the anti-theft function is enabled. Be sure that this indicator is on before leaving the machine.

1.Insert the red key into the key switch. (*Do not turn the inserted key. If the key is turned to the "RUN" position, return it to the "STOP" position.)

2.Press the display selector switch once and the message "Pull out key" appears on the LCD display.

(1) Anti-theft indicator (A) "STOP" (B) "RUN" (C) "START"

C The machine comes with two different types of keys. C How to register a black key (individual key) with the machine (When a black key is lost)

To avoid personal injury or death: A Before programming an anti-theft key, be sure to sit on the operator’s seat and make sure all the control levers are in the “Neutral” position.

If this is neglected, the machine may start moving as soon as the engine is started, which could lead to a dangerous situation. A The exhaust gas from the engine includes harmful substances such as carbon monoxide.

Be careful not to make this setting in a room where the exhaust gases easily build up or in an ill-ventilated place.

Black key (individual key) This key is used to start the engine. It is possible to start the engine as before by inserting the key and turning it to the [START] position. Registering a black key with the machine by using the red key will allow the black key to start the engine. A key not registered with the machine cannot be used to start the engine. Initially two keys including a spare key are supplied. The two accompanying keys have been already registered. Up to four keys can be registered.

Red key (registrati on key) If a black key for starting the engine should be lost, the red key is used to register another black key with the machine. The engine cannot be started with this key. For the method of using the red key, refer to "How to register a black key with the machine". (1) Red key (A) Insert

(1) Display selector switch

3.Pull out the red key from the key switch, and then the message "Insert the key" appears on the LCD display.

4.Insert the black key into the key switch. (* Do not turn the inserted key. If the key is turned to the "RUN" position, return it to the "STOP" position and return to the step 1.) Then the message "Pull out black key" appears on the meter panel after a while.

With this message displayed, the black key has been registered with the machine. 5.When all registeration operation has been finished, push the user setting switch.

(1) Red key (A) Pull out (1) User setting switch

(1) Black key (A) Insert

A If a registered black key is stolen or lost, re-register the remaining black key. When re-registering is performed, the stolen or lost black key is unregistered and it becomes impossible to start the engine with that key. A If the red key is stolen or lost, it becomes impossible to register or re-register a black key (for starting the engine) and the peripheral devices should be replaced. Therefore store the red key with great care.

If by any chance it gets lost, promptly contact your dealer or a Kubota-designated service factory. A Use the Kubota-specified key ring to hold the black key or the red key. Any unspecified key rings may interfere with the signal transfer between the key and the key switch, possibly failing to start the engine or to register a key properly. A Do not bundle two or more keys when using them.

Doing so may cause electric wave interference, possibly failing to start the engine. A Cut and remove the ring that is used to bundle the keys at the time of delivery. (If the keys remain bundled, the engine may start with the red key or reregistering could not be performed properly.) A If an unregistered key is inserted and turned more than six times for one minute, the alarm sounds for 30 seconds. (The alarm keeps sounding even if the key is drawn out.) D Insert and turn on the registered key, and the alarm stops itself. A If something is wrong with the machine, immediately contact your dealer and have the machine inspected and repaired.

For Canada (FCC / IC) FCC WARNING

A Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

A This device complies with Part 15 of the FCC Rules and RSS- Gen of the IC rules.

Operation is subject to the following two conditions : (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. A If a black key is inserted that was previously registered, "Registered" is displayed on the LCD screen and registering will not be performed.

A If you try to register the fifth black key, "STOP

Register" is displayed on the LCD screen and registering cannot be performed.

A In some cases, the engine may fail to get started. The following messages appear according to the situations. (1)Key is being authenticated

(2)Starting with the red key

(3)Starting with the non registered key (of other model)