ANGLE BLADE OPERATION

4.Move the AUX port knob mounted to the operating lever to the right and left to release pressure in the

AUX port.

D There are two types of machine, one has the AUX port knobs mounted to the right and left operating levers, the other has the AUX port knob mounted to one operating lever.

Make choice according to the type of machine.

(1) AUX port knob (2) Attachment control lever

To avoid personal injury or death: A Never jack up or lift the machine with the angle blade placed at an angle.

Stability of the machine is affected with blade at angle, keep at neutral position.

Before starting the job, position and keep the angle blade at the standard 0 marking (Refer to

Figure (1)). A Do not work under the machine.

1.Push the angle blade control switch to the right or left, and the angle dozer is placed at an angle.

2.For the right-hand angle setting, push the angle blade control switch in direction (A). The angle blade will be placed at an angle toward (A). 3.For the left-hand angle setting, push the angle blade control switch in direction (B). The angle blade will be placed at an angle toward (B).

(1) Angle blade control switch (A) Turn the right (B) Turn the left

Figure (1)

(1) Mark (red) (2) Mark (red) (A) Turn the right (B) Turn the left