EXPLANATION OF COMPONENTS 6

RESET METHOD FOR FILTER, OIL REPLACEMENT TIME The filter and oil replacement time is displayed on the character display, so if the filter and oil have been replaced, reset the filter and oil change time. 1. Press the () of machine monitor mode selector switch 1, and display the reverse travel in odometer. 2. Press (>) or (<) of machine monitor mode selector switch 2 and display "MAINTENANCE MONITOR".

3. Press the () of machine monitor mode selector switch 1. It will change to the display in the diagram on the right.

The bottom line shows 2 items: the replacement time on the left and the total number of times the item has been replaced on the right. 4. Press (>) or (<) of machine monitor mode selector switch 2 and display the item to be reset.

5. Press the () of machine monitor mode selector switch 1. It will change to the display in the diagram on the right.

The top line shows [Reset] and [Item to be reset] in turn. 6. When resetting the replacement time, press (>) or (<) of machine monitor mode selector switch 2, align the cursor with "YES", then press () of machine monitor mode selector switch 1. It will reset and returned to the previous screen.

To abandon, align the cursor with "NO", then press () of machine monitor mode selector switch 1.

7. When resetting the replacement time for another item, perform the procedure from step 4. After completing, press () of machine monitor mode selector switch 1 twice or turn the starting switch OFF.

METHOD FOR SELECTING LANGUAGE Use this when switching the language displayed on the character display.

1. Press the () of machine monitor mode selector switch 1 and display the reverse travel odometer. 2. Press (>) or (<) of machine monitor mode selector switch 2 and display "LANGUAGE".

3. Press the () of machine monitor mode selector switch 1. The presently selected language is displayed. 4. Press (>) or (<) of machine monitor mode selector switch 2 and select the language.

The available languages are English, Japanese, German, French, Italian, Spanish, and Swedish.

5. When the () of machine monitor mode selector switch 1 is pressed, the language is set and the screen returns to the previous screen. 6. When completing the operation, press () of machine monitor mode selector switch 1 twice or turn the starting switch OFF.

INPUT METHOD FOR TELEPHONE NUMBER When an error for action code "E03" occurs, it is possible to display the telephone number.

1. Press the () of machine monitor mode selector switch 1 and display the reverse travel odometer. 2. Press (>) or (<) of machine monitor mode selector switch 2 and display "TEL".

3. Press () of machine monitor mode selector switch 1. It will change to the display in the diagram on the right.

Once the telephone number is input, the input number will be displayed next time.

4. Up to 12 digits can be displayed for the telephone number.

Input from the first digits.

The cursor is displayed at the input position. Press (>) or (<) of machine monitor mode selector switch 2 and display "0 - 9 ".

To leave a blank, select "*".

When the input value is decided, press () of machine monitor mode selector switch 1. The cursor will move to the next position. 5. Repeat the procedure in step 4 until the last digit. At the last digit, press () of machine monitor mode selector switch 1 to return to the previous screen.

If there is a mistake in the input or the input is to be stopped, press () of machine monitor mode selector switch 1 to return to the previous screen. 6. When completing the operation, press () of machine monitor mode selector switch 1 twice or turn the starting switch OFF.