HANDLING DUMPING COUNTER 6

DUMP LEVER LOCK KNOB

WARNING

When performing inspection of the machine with the dump body raised, always set the dump lever to HOLD position, lock with the dump lever lock knob, then use the body pivot pin.

This device (6) is used to lock the dump lever.

To set to FREE position, pull the lock knob up until it stops, then turn it to lock it in position. To set to LOCK position, pull the lock knob up, then turn it to release the lock. The knob will be pushed in by the force of the spring, and the lock will be applied. After doing this, check that the dump lever is locked.

SECONDARY BRAKE PEDAL Use this pedal (7) to apply the front and rear wheel brakes and the parking brake. Use this pedal If the service brakes cannot be applied properly for any reason, such as damage to the brake pedal.

REMARK If the pressure in the accumulator goes down, the secondary brake is automatically applied. For details of the method of canceling the secondary brake, see "WHEN PARKING BRAKE HAS BEEN ACTUATED IN EMERGENCY (PAGE 3-134)".