II. DETACHING AND ATTACHING COLLECTOR

Warning: When attaching or detaching the collector to the lawn mower:

･ Place the lawn mower on level, hard ground. Apply the parking brake securely

･ Shift the PTO lever to the STOP ( ) position.

･ Do not start the engine except for operation the lift.

1. DETACHING THE HIGH DUMP COLLECTOR

() Lift port () Dump port a. Set the collector lowest position by using lift and dump lever. b. Remove the hose from lift and dump port(  )(  ) of valve.

() wood (4) lift fulcrum pin

() stand (5) collector frame

(3) cylinder lower pin d. Support the container with wood() and stand(). e. Remove right and left cylinder lower pins(3). f. Remove right and left lift fulcrum pin(4). g. Push the lawn mower forward with using unload lever in the step.(refer to page.35) h. Separate the collector frame(5) and lawn mower.

2. ATTACHING THE HIGH DUMP COLLECTOR

Attach the collector in reverse order of detaching c. Separate the connection of grass limit sensor and safty switch wiring, it is located in right hand side on lawn mower.

Caution: After removing the hose, cover the port with a plug.

Important: Be sure to keep the removed parts.

Danger: Use the strong and stable stand.

3. DETACHING THE LOW DUMP DOLLECTOR

4. ATTACHING THE LOW DUMP COLLECTOR

Attach the collector in reverse order of detaching

Important: Be sure to keep the removed parts.

() Dump port

a. Set the collector lowest position by using lift and dump lever.

b. Remove the hose from dump port() of valve.

Danger: Use the strong and stable stand.

Caution: After removing the hose, cover the port with a plug.

c. Separate the connection of grass limit sensor and safty switch wiring, it is located in right hand side on lawn mower.

() wood (4) dump fulcrum pin

() stand (5) collector frame

(3) cylinder upper pin (6) cylinder stay e. Remove cylinder upper pins(3). f. Remove dump fulcrum pin(4). g. Push the lawn mower forward with using unload lever in the step.(refer to page.34 ) h. Separate the collector frame(5) and lawn mower. i. Separate the cylinder stay(6) and lawn mower.

1. BEFORE OPERATION