1 minute read
1.5 Personnel qualifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
The swing-away lattice extension is designed for the truck crane with which it was delivered. The sections of the swing-away lattice extension belonging to the truck crane have the same serial number as the truck crane.
The following sections are identified by the serial number: –Section1 (10 m (33 ft)) on the fixed section, –Section1 (10 m (33 ft)) on the inclinable section, –Section2 (7 m (23 ft)).
HFor technical reasons a truck crane may only be set with one swing-away lattice extension.
If you wish to use the swing-away lattice extension on several GROVE truck cranes, the swing-away lattice extension sections must be adjusted for the corresponding cranes and labelled with all of the respective serial numbers.
Risk of accidents during operation with non-modified swing-away
Slatticeextension Only operate the truck crane with those sections of the swing-away lattice extension which have the same serial number as the crane. The SLI is set only for this swing-away lattice extension. This prevents malfunctions and damage.
Risk of accidents if not adjusted correctly
SThe swing-away lattice extension should only be adjusted by CraneCARE at the particular location.
