Table 7: Controller Area Network (CAN) Functional Detail

Pressing beacon / position / work lights button once activates the beacon, the rear red position lights, and turns on the left LED in the button.

Activate Beacon/Position/ Work Lights

•Ignition switch in ON / RUN position.

•Beacon / beacon / position / work lights button is pressed.

Pressing beacon / position / work lights button a second time activates the beacon, the rear red position lights, the front work lights, and turns on the right LED in the button.

Pressing beacon / position / work lights button a third timeactivates the beacon, the rear red position lights, the front and rear work lights, and turns on both LEDs in the button.

Pressing beacon / position / work lights button a fourth time turns off all beacon, position and work lights, and turns off both LEDs in the button.

•Burned out bulb(s).

•Ignition switch malfunction.

•Electrical fault (switch, components, connections or battery).

•Component / safety interlock system malfunction.

•Hydraulic system malfunction.

Self Level Activated when system power is turned on

•Ignition switch in ON / RUN position.

When the ignition is turned to the ON/RUN position, the self-level bypass solenoid is turned off, activating self-level and turning off the self level cancel indicator.

•Electrical fault (switch, components, connections or battery).

•Component / safety interlock system malfunction.

•Hydraulic system malfunction.

•Ignition switch in ON / RUN position.

•Seat switch CLOSED (seat occupied).

Self Level Disable (Cancel)

•Restraint bar switch CLOSED (restraint bar down).

•Self-leveling cancel button is pressed.

Self-level bypass solenoid is turned on (self-level is turned off) and the self-leveling cancel indicator is turned on. Repeated pressing of self-leveling cancel button on the control keypad toggles self-level, and the selflevel cancel indicator light, on/off.

Self-leveling is reset to ON when system power is turned off.

NOTE: When the self-level cancel indicator light is ON selfleveling is OFF.

Resets when engine stopped.

•Electrical fault (switch, components, connections or battery).

•Component/safety interlock system malfunction.

•Hydraulic system malfunction.