Concerning your safety – Maintenance work

3.9.5 Measures for longer shut-down periods

If the machine is taken out of operation for a longer period of time, various conditions must be met and maintenance work must be carried out both before and after shut-down ÄChapter 8.11.5 ‘Measures prior to extended shut-down period’ on page 99

It is not necessary to define a maximum storage period if these measures have been performed.

3.9.6 After maintenance work

Reassemble all guards and protections.

3.10 Repair

Identify a defect machine with a warning sign. Only operate the machine after it has been repaired. When replacing safety relevant components, only original spare parts must be used.

Repairs must only be performed by an expert/qualified person. When performing welding work on the machine you should cover the fuel tank with insulating material.

Concerning your safety – Signage

3.11 Signage

Keep stickers and signage in good and legible condition and comply with their meaning.

Replace damaged and illegible stickers or signage immediately.

Concerning your safety – Signage

Warning sticker - Follow operating instructions

Warning sticker - Danger of injury due to defective starter rope n Before use, check the starter rope for chafing. n Do not use a defective starter rope.

Information sticker - Lashing point

Information sticker - Lifting point