Connect the hoses between the hydraulic pump (F and the hammer control valve (1)

23. Insert the electric cable (21) in the lower part the side panel (L) and route it through the hole (M) .

24. Fasten the plate (22) the connector the harness (21) . 25. Install the plate (22) onto the side panel (L) with the screws (2) . 26. Connect the other connector from harness (21) the harness the cab letting it pass through the lead the floor . 27. removed, install the side panel (L) and the floor mat (Y) .

28. Connect the hammer control pedal (9) plugging it into the newly installed connector the side panel

RAIL16TLB0398AA 18

RAIL16TLB0275AA 19