Remove the and plate from the brake housing

44. Heat the sun gears 120 °C ( 248 °F ) in a bearing oven. W earing heat resistant gloves mittens, reinstall the sun gears the shaft until the bearing is against the carrier gear .

Reinstall the retaining rings the planetary gears. NOTE: adjust bearing inner rings after cooling

45. Heat the tapered roller bearing 120 °C ( 248 °F ) in a bearing oven. W earing heat resistant gloves mittens, reinstall the bearing the planetary gear until contact is made.

46. W the contact face bearing inner ring (A) and profile teeth (B) in the output shaft with anti - corrosive agent.

RAIL1 1WEL0442BA 43

RAIL1 1WEL0443BA 44

RAIL1 1WEL0444BA 45