1 minute read
Step Height 8.2 inch (208 mm
Group 01, Periodic Service
Planned Maintenance Schedule
ITEM WORK REQUIRED Interval in Hours 8 30 120 240 360 720 1440 Interval in Days/Weeks/Months 1d 1w 1m 2m 3m 6m 12m
1 Chassis 1.1 Check truck data plate and decals for legibility X 1.2 Check for crack formation and damage X 1.3 Retighten truck body bolts (to chassis) X 1.4 Check cover screws X 2 Motors 2.1 Check for arcing due to poor connections X 2.2 Check tightness on all connections X 2.3 Clean motor of dirt and dust X 2.4 Check torque of motor bolts X 2.5 Check for abnormal noise in motor bearings X 2.6 Blow carbon, copper, and plastic particle accumulations from the motor using compressed air X 2.7 Check brush wear X 3 Drive Gear 3.1 Check for proper fluid level in the drive unit. If fluid level is low, check for leaks X 3.2 Apply grease to drive unit fittings X 4 Brake 4.1 Clean dust and debris X 4.2 Check brake operation X 4.3 Check proper operation of switches by the deadman pedal X 4.4 Visually inspect friction plate for wear X 5 Wheels 5.1 Remove all string, wrapping and debris X 5.2 Check all wheels for wear X 5.3 Grease load wheel bearings X 6 Steering Wheel 6.1 Check fasteners X 6.2 Check ease of steering X 7 Electrical Control System 7.1 Check key switch X 7.2 Check brake micro switch X 7.3 Check control wiring harness for proper routing X 7.4 Examine negative cable and wire cuit cards. s from battery to the cir- X 7.5 Check red emergency stop switch for operation X 7.6 Check travel direction/speed control for operation
