Facia mounted switches ..................................................................................................................... 1

SAFETY MESSAGES

General

Specific safety messages, in the form of signs or labels, are displayed at various locations on the machine and as close as possible to hazardous areas. The information displayed on each safety sign or label is intended to warn of possible hazards to the machine operator, personnel or equipment. Any personnel involved in the operation or maintenace of this machine should be aware of the location and content of all safety signs and labels.

Safety signs and labels must be kept in a clean and legible condition. The following also applies:

When cleaning a safety sign or label, do not use any solvent, fuel or other harsh chemicals. Use of these will loosen the adhesives that attach the signs or labels to the machine.

Replace any safety sign or label that is damaged or is not legible and cannot be cleaned.

Install a replacement safety sign or label for any that are missing.

NOTE Replacement safety sign or label can be obtained from any CLAAS dealership.

Parts or components, with a safety sign or label attached, may be replaced. In this case, a replacement safety sign or label must be attached to the part or component that has been installed.