Cab access

3.10Air-suspension seat (option)

Important notice on air-suspension seat operation

Before putting the machine into operation, check the switches on the seat for correct function.

Danger!

In order to avoid danger of accidents, do not put a machine into operation with a defective air-suspension seat! ☞ Have the seat repaired by an authorised workshop

Air-suspension seat operation

4

Fig. 66: Air-suspension seat The air-suspension seat height can be adjusted continuously. There are two settings for the automatic weight adjustment. The second setting allows for an individual height adjustment. ☞ Pull or press lever 4 ➥ Seat height changes ➥ Upon reaching the upper or lower limit, the height is automatically adjusted to ensure a minimum spring travel

Caution!

Do not run the air compressor for more than 1 minute to avoid damage to it!

3.11Fire extinguisher (option)

Fire extinguisher operation

Fig. 67: Fire extinguisher (option) The fire extinguisher is not included in the machine's standard equipment (option). If a fire extinguisher is retrofitted according to DIN-EN 3, then this must be carried out by an authorised workshop ☞ Operate the fire extinguisher according to the instructions printed on the fire extinguisher.

l

Caution!

In order to ensure the full serviceability of the fire extinguisher, ☞ Have the fire extinguisher checked at regular intervals and refilled •See the inspection tag ☞ Remove the fire extinguisher from the cab in an emergency only ☞ After the fire extinguisher has been used: have it filled by an authorised workshop, or replace it with a new one