CRANKSHAFTGP

WORKTOOLS 177-1982 BLADE GP-ANGLING

S/N: CED1-UP; FDG1-UP; 4YZ4000-UP; 5SZ4000-UP PART OF 177-1990 BLADE AR AN ATTACHMENT

SMCS-6060, 6701

NOTE REF NO GRAPHIC

REF PARTNUMBER QTY PARTNAME

1 2 3 4 5 6 (PRODUCTLEVEL) 1 1 157-0940 2 PIN 2 1 166-0319 2 PIN AS 3 1 9R-2959 2 CLIP 4 1 177-1921 2 PIN AS 5 1 177-1972 2 SKID AS Y 6 1 177-1988 1 BLADE AS-ANGLING 7 1 3B-8489 2 FITTING-GREASE

M 8 1

M 9 1 M-METRIC PART Y-SEPARATE ILLUSTRATION 6V-9189 2 LOCKNUT (M8X1.25-THD) 8T-6869 2 BOLT (M8X1.25X60-MM)

i03930949

SEE PAGE

612

GRAPHIC #1

<END>

g01960539

WORKTOOLS 222-7724 BLADE GP-ANGLING

S/N: CED1-UP; FDG1-UP; 4YZ4000-UP; 5SZ4000-UP PART OF 231-5275 BLADE AR AN ATTACHMENT

SMCS-6060, 6701 i04156826

NOTE REF NO GRAPHIC

REF PARTNUMBER QTY PARTNAME

1 2 3 4 5 6 (PRODUCTLEVEL)

SEE PAGE

B 1 1 8E-5702 22 SHIM (0.8-MM THK) 2 1 358-4944 1 PLATE-IDENTIFICATION (BUCKET SPECIFICATIONS) 3 1 168-8389 4 TACK-FASTENER

Y 4 1 222-7412 1 BLADE AS-ANGLING 613 5 1 222-7725 1 FRAME GP-BLADE 6 1 231-5271 1 PIN 7 1 238-1004 2 MOUNT AS 8 1 238-1005 2 SKID AS 9 1 244-1367 1 BUSHING

Y 10 1 222-7546 1 EDGE GP-BIT & CUTTING 796 11 1 5P-1076 8 WASHER-HARD (13.5X30X4-MM THK) 12 1 6V-7644 2 RING-RETAINING

M 13 1 8C-8478 4 BOLT (M20X2.5X140-MM) 14 1 8J-2880 1 CAP-BEARING 15 1 8T-4123 4 WASHER (22X35X3.5-MM THK)

M 16 1 8T-4139 8 BOLT (M12X1.75X30-MM) B-USE AS REQUIRED M-METRIC PART Y-SEPARATE ILLUSTRATION