1 minute read
Dismantling
from CAT Armored Face Conveyor PCM-D- Drive Control System Impact roll crusher SK 1118 Majialang1 Operat
Installing the assembled crusher into the stageloader
Using lifting and pulling gear the completely assembled crusher is pulled into the stageloader and connected with the pans. The chain is guided through the rop and bottom race of the impact roll crusher and coupled. Finally, the personnel safety and dust protection zone facilities are fitted ahead of and behind the crusher.
Stop the crusher plant. Disconnect the electrical supply. Important! Dismantling is peformed using the same tools and devices as for assembly. When dismantling the power unit, care should be taken that all exposed shafts, hubs, labyrinth paths, and flanges are protected against corrosion, dirt, and mechanical damage. Particular care should be used in the treatment of machine parts that can get damaged easily. When disconnecting hose lines, the hose ends should be plugged by blind or screw plugs. Loose parts (screws, bolts etc.) should be kept in suitable boxes, well arranged and protected against dirt and damage.
