OPERATOR’S CONTROL CONSOLE - OVERVIEW

CONTROLS - LOCATION AND FUNCTION

Regardless of previous experience, the new operator of any machine must become familiar with the location and function of all of the operating controls before beginning to operate the machine. Since this manual covers all possible controls that could be used on this machine, become familiar with both this manual and the particular machine being operated.

CAUTION: Read and become familiar with this manual before attempting to operate any of the machine controls. Pay particular attention to the caution and warning statements, and any federal, state, local or company safety rules relating to the machine. Failure to be aware of and understand the hazards associated with the operation of the controls may lead to death, personal injury or serious machine damage.

OPERATOR’S CONTROL CONSOLES

The operator’s control consoles are mounted on each side of the operator’s seat. The display monitor is mounted on the left console, as shown. An auxiliary control console is located to the right of the operator.

NOTE: The operator controls are all electric. The switches, potentiometers and joysticks operate electric controls, electromechanical controls, or electrohydraulically actuated valves on the machine.

OPERATOR’S CONTROL CONSOLE - OVERVIEW

NOTE: The panels with controls as shown on the following pages are typical of what could be included on a console.