1 minute read
Tramming.......................................................................5
BI016382
Tramming
1. Turn the “OFF/FWD/REV”selector switch located on the cover of the starter enclosure to the “OFF”position.
2. Turn the “OFF/TRAM/CONVEYOR”selector switch located on the cover of the starter enclosure to the “TRAM”position.
3. Turn the “OFF/MANUAL/AUTO”selector switch located on the cover of starter enclosure to the “MANUAL”position.
4. Set main circuit breaker located on the door of the starter enclosure by first moving the circuit breaker lever to the “RESET”position and then to the “ON”position.
5. Engage the “START CONVEYOR”pushbutton located on the cover of the starter enclosure to start the pump motor.
6. Lift up the neutral start valve handle guard all the way back so that the guard will not fall on the operator’s hands.
The machine can now be trammed.
