Location of the Operating Controls

BI010977

Operator’s Controls Operators Manual

Location of the Operating Controls

The operator must become familiar with the machine and its operating controls. The preceding figure depicts the general location of controls on the machine.

The operating controls will be grouped as primary and secondary controls, depending upon their location. The primary controls are the controls located in the operator’s cab and the secondary controls are the controls located in the machinery house.

The descriptions listed should familiarize the operator with each control’s location and functional use. The terms left, right, forward and reverse indicate directions with the operator seated in the cab, facing forward, with the boom extending over the take-up axle of the crawlers.