1 minute read
Installation....................................................................................................................................7
from Cat E3000 E3500 EC4000 E4000 E5000 EX5000 E5500 E6000 E6500 Chassis & Mast Service Manual - DOWNLOAD
Installation
To install, reverse the removal sequence and do the following steps.
1.Install the tire and tighten the wheel nuts.
Tighten each nut until its tapered portion is in full-face contact with the counterbore in the rim. 2.Lower the truck until the tire touches the floor.Then tighten the wheel nuts in numbered sequence shown below, in two or three steps, to the specified torque.
CAUTION
Use the same size and brand of tire.
Make sure the clamping surfaces of the wheel nuts and counterbores in the rim are free of dirt.
Wheel Nut
Counterbore 6 1
3
4
2 5
205953
Tightening Torque For Wheel Nuts E3000 - EC4000 E4000 - E6500
16 kgf•m (116 lbf•ft) [157 N•m] 38.5 kgf•m (278 lbf•ft) [378 N•m]
100835A
