II Adjustments 1

1500 - 7/8" Cut washers 100 - I" Cut washers 50 - 1-1/4'· Cut washers

Z- 1-1/2" Globe valves 30 - 1/4 x 4 Nipples 30 - 3/8 x 4 Nipples

ZO - l/Z x 3 Nipples 40 -1/Z x 4 Nipples 6- l/Z x 6 Nipples lZ - 3/8" Close Nipples

Z- 1-1/Z" Close Nipples

ZO - 3/4 x4 Nipples 1- 1-1/2" Union Elbow

Z- 1-1/ Z" Union 6- 1/ 4" Elbows

Z- 1-I/Z" Elbows 6- l/Z" Elbows

Z- 1-1/2 x 6 Nipples 50 - I/Z to 3/8 Bushing 4-Z to l-l/Z Reducing Bush 4- 1-1/2 Coupling 40 - I/Z to 3/4 Reducing Coupling 40 - 1/Z" Coupling 15 - 3/4" Coupling 1- 1-I/Z x 1-1/Z x l/Z" Tee 24 - I/Z to 3/8 Reducing Coupling 100 - Feet l-l/Z I1 Pipe 1- Manifold 4 11 pipe 4'_0" long

Z- 4" Pipe Cap 19 - l/Z" Globe Valve 1- 3/811 Pipe Plug

Z- 1/4" Globe Valve 24 - 3/8 to 1/4 Reducing Valve lZ - 3/4 to lIZ Reducing Bushing. lZ - Feet /#Z Annealed Wire

ELECTRICAL TOOLS

Z- 4'· Screw Drivers Z- 8" Screw Drivers Z- 811 Pliers (side cutting) 1- 6" Long Nosed Pliers Z- 10" Gas Pliers 1-811 Mill File 1-1ZIt Mill File 1- 1Z" Double Cut File 1-1Z Half Round File 1- 8" Round File 5- File Handle B

1- 6" Crescent Single End Wrench 1- 10" Crescent Single End Wrench 1-1/4 to 3/4 Pipe Bender 1- 5/16 X 3/8" Open End Wrench 1-7/16 x l/Z Open End Wrench 1- I/Z x 5/8 Open End Wrench 1- 3/4 x 7/8 Open End Wrench 1- 7/8 x 1 Open Ene. Wrench 1- 10" Stilson Wrench 1- 12" Monkey Wrench 2- 18" Pipe Wrench 2- Cold Chisel. 2- Gouges 1- Center Punch

I- I-lIZ lb. Hanci Hammer 1- 3/16 Straight Shank Drill 1- 1/4" Strai,ht Shank Drill 1- 1/2" Straigat Shank Drill 1- 3/i" Square Shank Wood Bit 1- Standard Brace 1- 10" Hack Saw Frame 48 - Hack Saw BIactes 1- tlZ Soldering Iron 1-6ff Melting Pot 1- "," Pouring Ladle 1- Set 3/16" Steel Letters 1- Set 3/16" Steel Figure8 2- 2" Paint Bru.he. 1- Gasoline Furnace 1-1 Quart Blow Torch 1- 25000 OHM Mallleh 1- /12 Pipe Viae 1- 75 Foet Filh Tape 100 - Feet l/Z Rope 100 - Feet 5/16" Tiller Rope

Z- 1/2 Deuale Block 1- Steel Grip for 1/2 Wire 1- Set Pipe Die. l/Z to 2" 8- Copper Terminal. (508,000 CM) 8- Copper Terminal. (250,000 CM) 12 - Copper TerIninal. (3/0)

TOOLS AND EQUIPMENT

It fa reconunended that a small teo1 room be erected at the erection .ite for the protection of the teela. drawill". etc.

One electric weldin. machine is required to he u.ed throughout the erectien period.

Conault Marion Pewer Shoyel Cempaay re,ardin, derrick., tooll uul other equipment for u.e wilen erectiJa. tlae maclUne.