OPERATING INSTRUCTIONS RH 90 C E Operation

Switching on the circuit breaker

The circuit breaker is accessible in field I after opening the switchgear cabinet door (Fig. 2-39:).

Slip switch lever (11, Fig. 2-40:) pointing upwards onto the actuating shaft of the circuit breaker (1).

Pull locking element outwards against spring pressure.

Using switch lever (11), turn actuating shaft (drive A) clockwise from position I by ca. 180° downwards to position II

This tensions the cut-out spring.

Using switch lever (11, Fig. 2-41:), turn actuating shaft counter-clockwise from position II by 180 ° upwards to position I

This tensions the cut-in spring and the circuit breaker is switched on.

Engage locking ring.

The indicator lamp (1, Fig. 2-42:) comes on.

Switching off the circuit breaker

Pull locking element outwards against spring pressure.

Using switch lever (11, Fig. 2-40:), turn actuating shaft ca. 20 ° counter-clockwise. This releases the cut-out spring. The circuit breaker is switched off.

The indicator lamp (1, Fig. 2-42:) goes out.

Further information is given in the attached leaflet on circuit breakers.