1 minute read
OPERATING INSTRUCTIONS RH 340
Inspection and servicing
Radiators
The radiators are located on the superstructure in the counterweight module.
Weekly checks:
" Check radiator fins for dirt and clean, if required.
Cooling-liquid level
An insufficient cooling-liquid level is displayed on the BCS screen (2, Fig. 3-30:).
Risk of scalding from hot cooling liquid. Open radiator cap cautiously.
" Turn radiator cap (1) back to the first notch.
" When the pressure has been released turn cap into the "open" position and remove.
The cooling-liquid level should reach up to the lower edge of the filler tube. Top up with cooling liquid, if required.
The level indicator (4, Fig. 3-31:) shows the liquid level.
The radiator caps (1, Fig. 3-30:) are accessible from above.
