OPERATING INSTRUCTIONS 6015 / RH40E Inspection and servicing

Changing the gearbox oil

Draining off oil

 Prepare a collecting recipient for used oil. Choose the required capacity in accordance with the "Refilling quantities - Oil" table.

 Unscrew plug (3, Fig. 3-76:) and drain off oil. Screwing out breather filter (2) facilitates draining off the used oil. Plug (3) is accessible from the bottom.

 Screw plug (3) back in place.

Pre-chamber

Draining off oil

 Prepare a collecting recipient for used oil. Choose the required capacity in accordance with the "Refilling quantities - Oil" table.

 Unscrew plug (7, Fig. 3-76:) and drain off oil.

Plug (7) is accessible from the bottom.

 Screw plug (7) back in place.

Filling in oil

 Unscrew breather filter (2, Fig. 3-77).

 Fill in new oil through opening of breather filter (2).

The oil level should reach up at least to the middle of the inspection glas (3).

Fig. 3-76:

Filling in oil

 Unscrew breather filter (2, Fig. 3-76:).

 Fill in new oil through opening of breather filter (2). After oil changes, plug (3) must be tightened beforehand.

 Check oil level with dipstick (1).

Oil can also be filled in through the opening of the breather filter (2, Fig. 3-77).