OPERATING INSTRUCTIONS 6015 / RH40E Operation

Ventilation And Heating

Ventilation (fresh air)

Air conditioner (optional)

The control elements of the air cond. are installed under the ceiling of the driver's cab (Fig. 2-46).

 The desired temperature is adjusted with control knob (1).

 The desired blower intensity level / amount of air is selected with control knob (2).

For more information, please refer to the air conditioner manual of the manufacturer.

Fig. 2-44:

 When the engine is stationary, turn keyoperated switch (72, Fig. 2-44:) to position 1

 Slide heating control lever (91, Fig. 2-45:) backwards (heating power = 0).

 Turn rotary switch (60, Fig. 2-44:) to the desired fan intensity (steps 1 - 3).

Adjusting the heating performance

 Slide lever (91, Fig. 2-45:) forwards depending on the heating performance desired. The foremost position gives maximum heating power.

 If greater amounts of warm air are needed, switch on the fan with rotary switch (60, Fig. 2-44:).

Auxiliary heating (optional)

Switch ON / OFF auxiliary heating with switch (89, Fig. 2-47). When switched ON, indicator lamp (90) lits.

Additional information can be found in the manufacturers instruction manual.