Speed sensor

After excavator removal, set transmission to the start condition carrying out the above described operations in reverse.

WARNING

During removal do not allow anybody to get too close to the machine. Use a second operator as a signalman for operation coordination.

Reset parking negative brake and bring gearbox lever back to normal conditions when excavator removal is no longer necessary.

WARNING 3

F5859B

26601 6-29950 GB

SPEED SENSOR

In the rear axle is located the transmission housing. On the right side is speed sensor (1). Each time its replacement is required: • Disconnect the electrical cable from sensor (1). • Untighten nut (2) and unscrew sensor (1) progressively. For speed sensor assembly: • Tighten sensor (1) to the stroke, back-up by 2 turns.

Lock in position with nut (2). • Connect sensor (1) to the electrical cable.

1

2

F8381