treatment .................................................................................. 10

W ARNING: Check that there is one in the surroundings before draining the pressure from hydraulic circuits during machine hydraulic cylinder inspection.

W ARNING: Use gloves when handling high - temperature parts.

W ARNING: Bring the lower parts attachments in contact with the ground before inspecting repairing them.

W ARNING: Check that hoses and tubes are securely connected. there is any damage a hose tube, replace it. not check for oil leaks hand. Use cardboard wood.

W ARNING: When removing attachment pin other hardened pin, use a hammer that has a soft head.

W ARNING: W ear eye protection when using a hammer install a pin when working with a grinder . At this time, use goggles eye protectors that meet standards.

W ARNING: Park the machine in a safe location when repairing inspecting it.

W ARNING: Use work site protection when repairing the machine. Check the oil, coolant, grease, and tools. Recover materials and parts necessary . Pay enough attention safety .

W ARNING: Some the machine's parts are extremely heavy . Use appropriate lifting equipment for such parts. For weights and procedures, see the Service Manual.

W ARNING: Exhaust gases are toxic. Always provide good ventilation when working indoors in any other enclosed space.

W ARNING: the electrolytic battery solution freezes, it may explode.